118b815824
Get proper LINE_MODE type from tool event.
...
Properly fix https://gitlab.com/kicad/code/kicad/-/issues/15053
2023-06-25 13:43:32 +01:00
b00361d136
Revert "Don't use TOOL_EVENT parameters for line modes."
...
This reverts commit 84a63f7daa
2023-06-25 13:37:58 +01:00
84a63f7daa
Don't use TOOL_EVENT parameters for line modes.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15053
2023-06-25 11:10:07 +01:00
493828cc6b
Eradicate a bunch of calls to dyn_cast.
...
Also deletes PAD::GetParent() which fails to look for parent footprint
through groups.
2023-06-25 11:10:07 +01:00
300a60e88e
Eradicate a bunch of calls to dyn_cast.
2023-06-25 11:10:05 +01:00
d4b7144448
Properties: expose symbol attributes
...
Flip polarity of exclude-from-BOM and -board for symbols
to match that of footprints and match the GUI display.
2023-06-24 22:03:06 -04:00
4764606a9d
Sheet pins are owned by their parents, so the parent must go in the SCH_COMMIT.
...
Also collapses a bunch of duplicated code.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15044
2023-06-24 12:35:48 +01:00
a901247cbd
Rebuilding connectivity must be done after changes are committed.
...
It also needs to be done after undo and redo.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15028
2023-06-23 22:10:17 +01:00
237cc7eee1
Move TestDanglingEnds() to SCH_COMMIT.
...
Also fixes a bug where Convert Symbol wasn't undoable.
Also cleans up some SetModified() call no longer needed with SCH_COMMIT.
Also fixes bug where revert of a modification didn't update the screen's
RTree.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15030
2023-06-23 19:59:46 +01:00
aa6d9ad69a
Clear IS_NEW flags on commit.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15037
2023-06-23 15:30:09 +01:00
3a0f8214fa
ADDED: Properties panel for schematic editor
...
Initial infrastructure work; follow-ons will add more
properties for schematic items.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6351
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14105
2023-06-22 22:32:24 -04:00
19f5c16708
Ensure const-ness matches across draw wire event parameters
2023-06-21 14:06:25 +01:00
a2bd7192c0
Add default empty symbol to place symbols/power actions
2023-06-21 13:42:21 +01:00
480223f67c
More RunAction specialization
2023-06-20 21:52:50 +01:00
b04e54dbea
Switch TOOL_EVENT and TOOL_ACTION to have a std::any parameter
...
Using std::any from C++17 allows for proper type handling in the
parameter field, removing the need for casting to void* and then casting
the void* to the desired type.
2023-06-20 21:52:50 +01:00
30336b2fe3
Unify go-back-one-step processing for drawing tools (and router).
...
Also warps mouse on all go-back-one-step operations for better feedback.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14981
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9985
2023-06-19 17:14:32 +01:00
e9046076a6
Fine-tune SCH_COMMIT handling of child objects.
...
While a SCH_SHEET does indeed have a SCH_SHEET parent, it's not one of
the children that gets added as a CHT_MODIFY of its parent.
Also fixes a bug where the newly drawn sheet gets removed from the
preview before running the dialog.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14976
2023-06-18 16:52:11 +01:00
fc69939190
ADDED: GUI feedback when grid setting is changed by hotkey
...
Can be extended to other cyclical hotkey settings
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14756
2023-06-17 23:18:50 -04:00
ef6866757e
Treat undo as backspace and/or escape when drawing. Ignore redo.
...
Undo == backspace when drawing a polygon or chained lines. Otherwise
it's an escape.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14961
2023-06-16 22:08:21 +01:00
8259091ca1
Fix typo in new SCH_COMMIT architecture for shape drawing.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14976
2023-06-16 15:50:51 +01:00
75e78f9088
Move bitmap2cmp and pcb_calculator to tool framework.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1939
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7561
2023-06-16 15:37:58 +01:00
5c4ca9f092
Renaming to support potential future usage of SIMULATOR_PANEL as a panel within SIMULATOR_FRAME.
2023-06-15 17:39:10 +01:00
4ccbbde54a
Net navigator bug fixes and improvements.
...
Note: This changes the net highlight tool behavior. When clicking on an
already highlighted net, the net highlighting is no longer toggled
off. This prevents the net navigator panel from being cleared.
2023-06-14 09:57:55 -04:00
4f39cb0789
Fix SCH_COMMIT handling in TwoClickPlace.
2023-06-13 13:21:11 +01:00
d96580c651
Properly handle improper symbols when pasting in symbol editor
...
Before, an improper symbol (one without the starting toekn) weren't
detected and reported to the user properly and would instead assert. Now
properly detect these and pass the error up the stack to the tool.
(Sentry issue KICAD-21J).
2023-06-12 23:14:56 +01:00
62f24aca1e
Fix Connectivity Asserts in new COMMIT structure
...
The connection graph should only be updated within the commit structure
because this is the only time the connectivity should be changed. We
want any connectivity changes to be included in the commit as well, so
this should be stored prior to the undo/redo list mods
2023-06-12 13:35:06 -07:00
286716a1ff
Retire AddItemToCommitAndScreen()
...
It duplicates a bunch of stuff in SCH_COMMIT and isn't really
compatible with it.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14933
2023-06-12 19:34:23 +01:00
8f1b9119bf
Upgrade some symbol editor stuff to SCHEMATIC_COMMIT.
...
Also renames SCHEMATIC_COMMIT to SCH_COMMIT since it's not schematic-specifc.
2023-06-09 22:41:47 +01:00
e698156975
Upgrade many editing actions to SCHEMATIC_COMMIT.
2023-06-09 22:41:47 +01:00
dcfd426333
Upgrade some dialogs to SCHEMATIC_COMMIT.
2023-06-09 22:41:47 +01:00
e9dc00cda3
Minor schematic net navigator improvements.
...
- Expand tree and highlight object selected with net highlight tool.
- Expand tree and highlight object that are currently highlighted with the
selection tool.
- Use more descriptive object text rather than menu entry text for tree
strings.
- Rebuild tree on unit changes.
2023-06-09 14:34:54 -04:00
90c14ecdf7
Upgrade a couple of schematic actions to SCHEMATIC_COMMIT.
2023-06-07 15:30:56 +01:00
c33d1ab244
Don't dirty the item connectivity prematurely
...
Item connectivity changes once the elements are commited, not during the
process of moving.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14884
2023-06-05 09:12:20 -07:00
d827bb8a1f
Leave back/forward/up nav buttons enabled so the action doesn't change.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14783
2023-05-31 11:13:35 +01:00
a4f16423c8
Push reference and value special cases down into LIB_FIELD::compare().
...
Use COMPARE_FLAGS::EQUALITY and COMPARE_FLAGS::ERC when doing
library diffs.
Also fixes a few more cases where we weren't checking for -1 when
doing a fieldID < MANDATORY_FIELDS.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14830
2023-05-29 12:40:20 +01:00
81d7428fd2
Don't call OnPageSettingsChanges on Undo/Redo.
...
It's incredibly expensive (multiple seconds on a document with
lots of text in an outline font).
2023-05-27 20:35:05 +01:00
4ed267394a
Outline font performance improvements.
...
1) Don't fracture font glyphs when generating them; we're going
to fracture during triangulation anyway.
2) Don't check for self-intersection when deciding to fracture.
It costs nearly as much as the fracture does.
3) Cache drawing sheet text.
4) Use the current font when checking for cache validity.
5) Parallelize glyph triangulation.
6) Don't invalidate bounding box caches when offset by {0,0}
7) Use the glyph cache when generating text effective shape.
8) Short-circuit NormalizeJustification() if its center/center.
9) Don't triangulate for GuessSelectionCandidates()
10) Avoid sqrt whenever possible.
11) Pre-allocate bezier and SHAPE_LINE_CHAIN buffers.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14303
2023-05-27 01:35:40 +01:00
28b37ad020
Someone accidentally exchanged the x and y coordinates when flipping
...
components horizontally and vertically in
SCH_DRAWING_TOOLS::SingleClickPlace()
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14725
2023-05-25 12:11:48 +00:00
14f004d2a5
Hook up text variable auto-complete for PCBNew.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14777
2023-05-25 10:24:50 +01:00
5a9ed66cfd
Go back to using QuasiModal for TextBox Properties.
...
Also removes auto-closing of blocking dialogs when inserting
symbols from the Symbol Editor or Chooser, preventing the bug
that QuasiModel was removed for earlier.
Also fixes a non-initialized parent pointer when the TextBox
Properties dialog was called from DrawShape().
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14777
2023-05-25 10:24:50 +01:00
24b04795fd
Add net navigator panel to schematic editor.
...
[ADDED]: A panel to the schematic editor that allows quick access to all
of the items connected to the currently highlighted net.
This is an initial swag at implementing a full net navigator feature. For
now it only shows the currently highlighted net nodes. The incremental
net list advanced setting must be enabled in order to use this feature due
to performance reasons. There are still some issues with saving the panel
position which will be addressed in the future.
Initial code for serializing wxAuiPaneInfo settings to and from JSON have
be implemented.
2023-05-20 13:48:03 -04:00
aeadd49a33
Fix windows builder broken by 831a6d5
2023-05-16 21:49:55 -04:00
831a6d55fc
Fix potential stale pointer bug in schematic highlight connection code.
...
SCH_CONNECTION objects are temporary and can become stale any time the
connectivity is updated. Keeping them around to reference later is a
bad idea. Even if the object pointer is still valid in an SCH_ITEM in
the undo/redo buffers, comparing the pointer against another pointer as
a test to see if they are the same connection is not valid. Saving the
connection name is safe and ensures the connection is the same even if
the pointers differ.
2023-05-16 20:06:21 -04:00
1adcb86e0b
Initial schematic search pane
2023-05-14 22:41:56 -04:00
4a62cc6edd
Separate symbol editor polyline and polygon tools.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/14695
2023-05-07 14:58:44 +01:00
49655ae742
Defense in depth for "mouse stuck in canvas".
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12653
2023-05-06 11:28:14 +01:00
c016bea020
Make sure mouse isn't captured when dialog is raised.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/14685
2023-05-06 11:28:14 +01:00
b41d446f58
Fix a bunch more issues with sheetpaths and allowExtraText.
...
A sheetpath is required to correctly resolve text variables.
Depending on currentSheet is rife with bugs.
There are many places where we do *not* want to be prepending
field names to the field values, such as netlisting,
building PDF hypertext menus, etc.
Also, Find/Replace needs to work on unresolved text, as
that's what we're going to display (and if replace nuked
your variable references you wouldn't be happy).
2023-05-05 17:23:52 +01:00
1e03c84918
Add ability to toggle attributes
...
Adds actions and context menu options to adjust attributes.
2023-05-04 11:51:21 -07:00
cb85412b85
Cleanup Undo ordering
...
The undo command has accreted a number of things over the years. This
prunes back the changes to the minimum required number and correctly
orders the actions
Fixes https://gitlab.com/kicad/code/kicad/issues/14661
2023-05-01 19:29:48 -07:00
04a53ea40d
Picker Tools: make sure we know what tool we are
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/14621
2023-05-01 12:43:09 -04:00
39cc686dc4
Back Annotation: add support for DNP and Exclude from BOM attributes
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/14584
2023-05-01 08:54:14 -04:00
f4b43617e7
Add COMMIT structure to Schematic and Symbol editors
...
Provides a single-point access for modifying the schematic and symbol
elements that allows chaining updates and reverting partial changes.
Standardizes the undo hierarchy between pcb and schematic editors
As this is another layer on the existing undo/redo structure, the
initial commit does not replace all undo/redo calls currently existing.
These will be handled in a series of follow-on commits
2023-04-28 17:05:47 -07:00
e1b39946fe
ADDED: show/hide controls for directive labels.
2023-04-28 00:32:49 +01:00
f7a552a2b3
Ensure item is gridded if there was no motion between clicks.
2023-04-18 23:55:56 +01:00
6fb8916798
The symbol viewer handles its own message panel.
2023-04-16 18:47:04 +01:00
18cebe3779
Don't assume an EDA_ITEM is a SCH_ITEM. v2
...
In the same way as cec4109176https://gitlab.com/kicad/code/kicad/-/issues/14528
2023-04-13 11:12:02 +01:00
a24a63e416
Search in label fields.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/14075
2023-04-12 23:21:53 +01:00
18e573d5e9
Remove stray wx include
...
There is no reason to include the actual string implementation header
here.
2023-04-12 18:57:12 +01:00
66f48d56ae
Separate sheet reloads (MODEL_RELOAD) and schematic reloads (SUPERMODEL_RELOAD).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/14523
2023-04-12 11:51:09 +01:00
0c049eccc7
Fix a bunch of compiler warnings
2023-04-11 17:01:30 +00:00
f01e083f7c
fix 2 issues related to SCH_GLOBALLABEL items:
...
- Ensure the first field in m_fields has id = 0 to be seen has hypertext
(it was not the case after reading a .kicad_sch file)
- when converting this item to another label/text, remove this special Field
from the copied field list to the converted label.
2023-04-10 09:58:27 +02:00
a226f7fc14
Don't delete default intersheetrefs field from global labels.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/14493
2023-04-09 19:03:36 +01:00
7eb13c3d33
Symbol editor: clear the edit flags of a pasted pin after place it.
...
When pasting a single pin, its edit flags were not cleared, and create
issues when trying to edit the pasted pin.
Fixes #14188
https://gitlab.com/kicad/code/kicad/issues/14188
2023-04-06 11:08:01 +02:00
a9b2234f4e
Use a softer Reset for grid settings.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/14458
2023-04-04 17:05:21 +01:00
3a8d6dffba
Don't close ERC window when changing sheets.
...
This Reset() override was originally added to fix a bug when opening
a new schematic in stand-alone. However, we now do that sort of
cleanup in SCH_EDIT_FRAME::doCloseWindow().
Fixes https://gitlab.com/kicad/code/kicad/issues/14470
2023-04-02 11:48:23 +01:00
28776f5745
Text attributes object improvements.
...
* Add compare method to COLOR4D object.
* Add unit test to validate COLOR4D comparison method.
* Add missing color test in text attribute comparison method.
* Add unit test for text attribute object.
* Remove unnecessary headers from text attribute header.
* Move text attribute code into separate source file.
2023-03-29 12:53:45 -04:00
016c958021
Always build spice simulator support
...
The simulator has advanced considerably, and it is seeing lots of active
development, so make it a required part of KiCad. Additionally, the
build without the simulator has actually been broken for a while, so no
one clearly is building without ngspice right now.
2023-03-20 16:54:32 +00:00
5bd491bd74
Avoid schematic editor frame to go on top when selecting a symbol.
...
It was s side effect of a CrossProbe called on a symbol selection.
This also replace commit e51594cdf5Fixes #14316
https://gitlab.com/kicad/code/kicad/issues/14316
2023-03-17 16:37:49 +01:00
6d296038f3
Improve simulation error reporting.
...
1) More REPORTER, less exception processing
2) Remove UI calls from SPICE_MODEL
3) Don't replace netlist with errors; show both
4) Don't bail out of netlist generation after single error
Fixes https://gitlab.com/kicad/code/kicad/issues/14295
2023-03-16 16:12:29 +00:00
66f6168163
Fix mode-less dialog issues.
...
Don't assume the dialog is mode-less and call Destroy() from within a
dialog method. This will most assuredly crash if the dialog is shown
modally or quasi-modally.
Don't leak memory for mode-less dialogs created on the stack. Make sure
when the parent frame window is closed that all mode-less dialog memory
is cleaned up. Dialogs are not child windows like controls and toolbars
so their memory does not automatically get cleaned up when the parent
window is destroyed.
Do not directly access frame parent window's pointer in dialog destructors.
Apparently the tear down order when destroying mode-less dialogs is not
guaranteed so the parent window may get deleted before the dialog causing
a crash when accessing the parent window pointer from the dialog dtor.
Do not close mode-less dialogs in the parent frame's destructor. This
doesn't guarantee that the dialog(s) will be destroyed before the parent
but it may reduce some careless mode-less dialog event handling in the
future.
2023-03-13 12:04:01 -04:00
c4ef08bead
Exercise more caution with user filenames.
...
In particular, don't assume "1" is an extension in "Schematic_1.1".
Fixes https://gitlab.com/kicad/code/kicad/issues/14263
2023-03-12 15:52:45 +00:00
74f064d3aa
Don't keep smart pointers to wxWindows, particularly modeless ones.
...
wxWindows have their own lifecycle management.
2023-03-11 19:36:01 +00:00
9546a40662
Correct usage of elipses after menu items.
...
(They should only be used when we collect more info before performing
the command. If the command is something like showing the simulator,
then there should be no elipsis as we don't collect more info before
showing the window.)
Also improves a few of the menu tooltips.
2023-03-10 21:33:06 +00:00
bc0d59801a
Graphical diff for schematic vs library symbols.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13736
2023-03-09 18:04:52 +00:00
2d6ab62da4
ADDED: schematic/library diff for symbols.
2023-03-09 18:04:52 +00:00
98d7b14dbc
A better solution to keep SPICE netlist from being entirely selected.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/14177
2023-03-06 18:46:01 +00:00
a1fb8e1b1d
Coverity fixes and code cleaning.
2023-03-06 07:12:18 -05:00
d2bd7e33b9
Remove extra canvas redraws when changing sheets.
2023-03-05 04:33:07 +03:00
610e787ada
Move to requiring explicit action to save project settings
2023-03-04 14:25:07 -05:00
b6d0b65261
Naming conventions and commenting. No functional changes.
2023-03-04 00:10:01 +00:00
48740dd3f8
Clean exposure of CONNECTION_SUBGRAPH
...
Removes internals from public consumption.
2023-03-03 14:07:17 -08:00
766b1a1ca8
Continue rationalisation of vector, trace and signal names.
...
Also add a little bit more code so user-defined signals can be edited
without resetting their properties.
Fixes https://gitlab.com/kicad/code/kicad/issues/14072
2023-02-27 21:11:31 +00:00
551773bf17
Save plot prefs (legend, grid, and dotted-secondary).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13940
2023-02-26 11:57:49 +00:00
ddf8d115c4
Handle de-highlighting items outside selection when selection changes.
...
Also adds selection cleared event to handled events.
And a small performance boost to not scan items for selection changes
when find is not seleciton-based.
2023-02-24 12:44:55 +00:00
ca5004b1d2
Power Symbols: rename IsPowerConnection to IsGlobalPower
...
It's kind of confusing because we have power type pins, and pins that
make global power nets as part of power symbols.
2023-02-22 18:01:47 +00:00
80b55f5980
Symbol editor: simpler creation of a new derived symbol
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13407
2023-02-22 01:49:46 +00:00
6fcb95b24e
ADDED user-defined signals.
2023-02-21 13:32:01 +00:00
b05b33a9ff
Fix a compil issue with gcc12.2 and Coverity warnings.
2023-02-21 11:54:38 +01:00
aacc9746e3
Yeet the last of wxSize/wxPoint to stop leaking gdicmn everywhere
2023-02-18 22:57:18 -05:00
fc68b8d71a
Make selected background layers translucent
...
We can't render them underneath other objects, but we can at least
make it possible to see other objects through them.
2023-02-16 22:45:29 -05:00
ecb28ddf1c
Prevent ghost image after canceling bitmap placement.
2023-02-17 03:53:44 +03:00
053d20e13d
Fix selection overlay being wiped when changing sheets
2023-02-16 17:14:08 -05:00
0f18a36f8f
Fix handling of selection overlay in schematic editor
...
We weren't actually using the overlay group at all
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11142
2023-02-15 21:16:58 -05:00
dca1281263
Fix some typos
2023-02-14 23:47:05 +02:00
18df4442bc
Schematic: Find and Replace on Selection
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/9293
2023-02-14 14:04:59 -05:00
4b07e3e413
Common Actions: Find Previous
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8968
2023-02-14 08:21:37 -05:00
3e715c99c8
Swap: take S key now that it's available
2023-02-14 07:42:06 -05:00
bc108023b3
ADDED operating point overlay for SCH_EDIT_FRAME.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11253
2023-02-11 21:11:07 +00:00
09822c7f18
ADDED direct access to signals & cursors.
...
ADDED differential cursors.
Fixes https://gitlab.com/kicad/code/kicad/issues/4447
Fixes https://gitlab.com/kicad/code/kicad/issues/6221
2023-02-11 21:11:07 +00:00
b000d68def
Move simulator to tool framework.
2023-02-11 21:11:07 +00:00
7bc79c17d4
Make sure screen RTrees are updated when changing bounding boxes.
2023-02-11 20:43:00 +00:00
2e9ed67e05
Don't dirty connectivity when moving non-reference SCH_FIELD.
2023-02-11 20:43:00 +00:00
e14f0848fa
SCH_EDITOR_CONTROL::Paste() - Adjust refdes behavior to match when creating new symbols
...
Pass 'false' as aStartAtCurrent to ReannotateByOptions(). Causes Pasing() symbols to start at the first available refdes after the currently
configured annotate start number, m_annotateStartNum.
Fixes #13342
2023-02-06 14:05:04 +00:00
92724ff09f
Coding style fix.
2023-02-06 07:59:17 +01:00
3ecd6ec186
Fix variable updating in SCH_FIELDs (which are not directly in the view).
2023-02-05 20:51:03 +00:00
fb225acefc
Eeschema, ExportSymbolsToLibrary(): fix not working replace library.
...
When exporting symbols of the schematic to a new library, if this library
exists the dialog ask for overwriting it, but it did not work.
Fixed now.
2023-02-05 18:41:58 +01:00
71002dce28
Eeschema: Fix export symbols to new library
...
Exporting symbols to new library now saves the library and forces
update of symbol links
Fixes #13494
2023-02-02 11:31:18 +00:00
5b9b555fdf
eeschema: fix sheet symbol pins changing side when resizing
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13719
2023-02-01 15:53:59 +00:00
29fd1b45d6
Ensure the DATASHEET field value only is used to know the datasheet URL.
...
previously, if the field option "show name" is set, the field name was
added to the URL, that broke it.
Fixes #13729
https://gitlab.com/kicad/code/kicad/issues/13729
2023-02-01 11:37:07 +01:00
29a4e2c7fe
Schematic: fix reversed tooltips for navigation buttons
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13707
2023-01-31 13:05:37 -05:00
8590745e9c
Allow simulation probe of junctions
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13712
2023-01-30 23:15:55 +00:00
39e85015c2
Preserve pins positions when resizing sheet
2023-01-26 20:56:37 +01:00
cf1d17b566
Fix unexpected resizing behaviour when using top left edit corner
2023-01-26 20:54:51 +01:00
843600cb7e
Fix erratical sheet pins behavior when resizing
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13658
2023-01-26 20:54:51 +01:00
43e4797d4d
Don't double-tap Connectivity Recalculate
...
SCH_EDIT_FRAME::RecalculateConnections() calls SchematicCleanup and then
resets the connectivity graph and recalculates it. OnModify() also
calls RecalculateConnections(). For long calculation schematics, this
can impact usability
2023-01-24 10:30:52 -08:00
9c12a6ee1d
Eeschema, eeschema_config.cpp: fix incorrect *.wks file path when trying to save it.
...
And add tests to see if the file can be saved
Fix also an issue in sch_editor_control.cpp: The page setup dlg must generate changes
only if the OK button is clicked.
Fixes #13599
https://gitlab.com/kicad/code/kicad/issues/13599
2023-01-22 13:17:05 +01:00
e900e472ce
Fix compil and Coverity warnings
2023-01-22 09:40:09 +01:00
e6dbca051c
Force realtime connectivity on
...
The pressure relief valve was not useful for common work patterns as it
forced the recalculation on many common actions such as bus expansion.
This caused it to actually feel slower than with the pressure relief
valve off.
For most schematics, realtime is now fast enough to not need the valve
and for those that are extremely complex, removing the valve helps this
run more predictably
2023-01-20 15:17:57 -08:00
6fa2eedb4b
Avoid the obsolete GetNextPin() call
...
This iterated over all pins to find the pin after a given item. Because
out pattern is consistently to iterate in the outer loop, this means
that we were an O(n^2) loop for the pins just to find their names. This
affected very large parts (e.g. FPGAs) when switching sheets to display
2023-01-20 14:12:15 -08:00
171cffec28
Schematic: actually check for hover on duplicate
2023-01-18 13:52:49 -05:00
144cd0b7f2
Schematic: duplicate on hover: grabs symbol instead of field
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13495
2023-01-18 13:35:52 -05:00
57c66a50ac
Add some missing wxS wraps
2023-01-15 20:24:29 -05:00
661eed7fed
Eeschema: ensure wire / bus auto-start respects bus labels
...
Fixes #13506 and further ensures correct behaviour for heirarchical labels and sheet pins
2023-01-15 19:25:28 +00:00
c7f33e21f8
Extract SCH_SCREEN::GetNeededJunctions from AddJunctionsIfNeeded
2023-01-15 19:17:39 +01:00
22cc861c9b
Remove dead code in AddJunctionsIfNeeded
2023-01-15 19:17:39 +01:00
7332c0c54d
Move SCH_EDIT_FRAME::GetSchematicConnections into SCH_SCREEN::GetConnections
2023-01-15 19:17:38 +01:00
cb58cb8cd3
Put new lines and junctions on the right layer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13505
2023-01-12 15:17:45 +00:00
d839f11d49
Rip out parsing of SPICE libraries for netlisting.
...
We only need to parse the libraries for the Sim Model Editor dialog
(so that we can determine the models to put in the popup). Doing it
for netlisting just opens us up to incorrectly parsing the SPICE, and
returns no value.
This also means that a SIM_LIB_MGR manages a single library, and
never multiple libraries.
This also allows the tidying-up of some error reporting structures to
better inform the user what went wrong.
Fixes https://gitlab.com/kicad/code/kicad/issues/13431
2023-01-12 14:51:03 +00:00
f4ac4be701
Fix naming of `updateTitle()`
...
This is a private function so should be lowercased to avoid confusion
2023-01-11 16:06:20 -08:00
8aff923710
Set dirty bit and handle undo for export remap
...
When remapping the exported symbols, we should keep this in the undo
stack (remapping, not the existence of the new elements) and set the
dirty bit for the file to ensure it is saved/autosaved
Fixes https://gitlab.com/kicad/code/kicad/issues/13493
2023-01-11 16:06:20 -08:00
c3c5468817
Sort all findNext candidates in a single list.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13483
2023-01-11 23:42:45 +00:00
c89925578d
Move find/replace to own tool so it doesn't rob events from cross-probing.
2023-01-11 14:22:06 +00:00
f8ef15f174
Fix over-zealous delete.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13476
2023-01-11 12:16:28 +00:00
4274bd0bb7
Schematic: handle rotations that include junctions
...
Also fix lack of line cleanup on mirroring.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13436
2023-01-09 11:05:30 -05:00
be5810a1ce
EEschema, "Change To" context menu: do not allow converting SCH_SHEET_PINs
...
to something else.
SCH_SHEET_PIN are specific, handled by a SHEET, and the conversion to a label
cannot be done.
2023-01-09 15:30:36 +01:00
063478b3dc
Implement brightening for Find Next hotkey actions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13421
2023-01-08 14:34:38 +00:00
4d5c4c4ea8
Ensure all selected items have their edit flags cleared after move.
...
Some sub-items like fields can be selected, and are not in the main item list.
Fixes #13435
https://gitlab.com/kicad/code/kicad/issues/13435
2023-01-08 11:52:21 +01:00
c3ca1ce014
Tune the hit-test extra-slop for lines (and apply it to arcs too).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13429
2023-01-07 23:06:51 +00:00
22144ae0d0
Fix bogus format string replacement type.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13426
2023-01-07 19:34:32 +00:00
c2f7dbfc15
Eeschema, AlignElements(): fix broken align of lines (bus, wire, graphic line)
...
It was due to a recent change (commit d824b7f5
2023-01-07 09:06:03 +01:00
8dc7baad3d
Cleanup actions should not activate tools. It causes all manner of side-effects.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13331
2023-01-06 22:15:20 +00:00
411669ab88
Fix schematic power symbol annotation paste bug.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13405
2023-01-06 13:55:13 -05:00
98f0959f39
Default common-to-all-units based on last-used setting.
...
(Or whether or not the symbol has interchangeable units when a new
symbol is loaded.)
Fixes https://gitlab.com/kicad/code/kicad/issues/13391
2023-01-06 00:34:16 +00:00
c29dfe026e
Force recursing annotation when set to auto
...
Automatic annotation should always annotate new elements regardless of
where in the hierarchy they are
Fixes https://gitlab.com/kicad/code/kicad/issues/13378
2023-01-05 15:03:38 -08:00
933a5d45e1
Be more aggressive about clearing edit flags after operations.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13173
Fixes https://gitlab.com/kicad/code/kicad/issues/13385
2023-01-05 18:08:22 +00:00
d99e09014b
Rename SYMBOL_INSTANCE_REFERENCE to SCH_SYMBOL_INSTANCE.
2023-01-04 15:39:50 -05:00
bd5d10cd7b
Schematic: remove more extraneous dangling symbols
2023-01-04 11:07:23 -05:00
73b7dcbc35
Attempt to unify symbol annotation behavior between place and paste.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13330
2023-01-04 07:36:00 -05:00
7f35323416
Re-enable sim model ERC testing.
2023-01-03 00:59:14 +00:00
c5948de2af
Update find status when switching sheets.
...
(Not just when switching sheet during find.)
Fixes https://gitlab.com/kicad/code/kicad/issues/13351
2023-01-02 18:49:28 +00:00
068b714908
Schematic: merge dual import sheet pin actions
...
I believe I have managed to keep the slightly distinct functionality of
both implementations: the action will now use the selected sheet or find
one under the cursor if it's there.
It will also keep placing pins while they exist, which was inconsistent
in the behavior of the single click version before (other single click
commands keep placing until you cancel, e.g. no-connects )
Also, it will automatically end the tool when it runs out of sheet pins.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13296
2022-12-29 09:36:29 -05:00
e65de51fc7
Schematic: label auto orientation needs to respect move/drag/change
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13226
2022-12-28 14:30:57 -05:00
6cc17e4a16
Schematic: new flag IS_BROKEN for trimming BreakSegment danglers
2022-12-28 12:27:57 -05:00
f03fd5ad2d
Schematic: remove IS_RESIZING
...
Is unused/redundant with IS_MOVING
2022-12-28 12:27:57 -05:00
b5b65e1455
Schematic: update dragged lines dangling state in realtime
...
Makes the visuals a little nicer as we add bend lines
2022-12-28 12:27:57 -05:00
f1fab140a1
Schematic: make menu bar rotation items conditional
...
Also fix some items not getting a context menu rotate action.
2022-12-27 14:18:47 -05:00
8ca8f83a18
Schematic: sheet pin dragging special case needs to check endpoints
...
Otherwise we'll force the wrong end of a line to be special-cased
2022-12-27 12:15:49 -05:00
33b774685b
Schematic: fix inconsistent selected-by-drag behavior of mid-line labels
...
Two issues here:
Selected labels would half of the time add junctions splitting lines
when the lines would have been selected-by-drag (removing the need for a
junction).
Split lines aren't selected by drag by default, and we need to test
labels against lines that are selected by drag.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13224
2022-12-27 12:15:49 -05:00
78e2f0fd4d
Sheet instance handling improvements.
2022-12-26 08:30:03 -05:00
ba4a7a979a
Don't respond to Duplicate events while placing multiple copies of a symbol.
...
It doesn't really make any sense as clicking will just create another copy
as well.
Fixes https://gitlab.com/kicad/code/kicad/issues/13253
2022-12-24 19:40:39 +00:00
6f44468385
Fix more lifetime issues in simulator tuning.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13257
2022-12-23 22:03:24 +00:00
e5363d164c
Lib symbol editor, export SVG: fix incorrect position of the drawings.
...
Fixes #13249
https://gitlab.com/kicad/code/kicad/issues/13249
2022-12-23 16:31:35 +01:00
9b782fa827
Schematic: don't deselect line ends when right clicking off-selection
2022-12-22 14:16:38 -05:00
8b7d0d71fb
Schematic: show update/change symbols for multiple symbol selection
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13231
2022-12-22 14:00:51 -05:00
3037f2b444
Schematic: don't require cursor on selected net to assign netclass
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13199
2022-12-22 10:15:48 -05:00
fc054bda8e
Schematic: fix edit symbol assert
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13197
2022-12-20 08:23:02 -05:00
389f0655cd
Schematic: re-enable old break wire functionality, add slice
...
Also fix break/slice wires for multiple wires. The shortcut and code
always allowed it, the context menu just didn't appear.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13163
2022-12-19 15:55:59 -05:00
113fd83fdd
Fix Clang-tidy warnings.
2022-12-19 13:19:21 +00:00
ebcc1ac062
Use current cursorPos when creating sheet pins.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13206
2022-12-19 12:27:55 +00:00
65552df6ce
Quite Coverity.
2022-12-16 19:11:34 +00:00
24786fe0e9
Fix multi-unit symbol bugs.
...
1) SPICE pins need to include all units
2) Already-seen-unit-x needs to be reset when getting netlist again.
Fixes https://gitlab.com/kicad/code/kicad/issues/13164
2022-12-16 13:57:46 +00:00
af71c2d877
Clear hover selections after command.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13073
2022-12-15 13:47:56 +00:00
50ccc4e6da
Fix issue converting legacy SPICE models.
...
1) if a legacy model references a library then we need to see if said
libraray exists and read model from it if so
2) legacy node ordering is by index, not pin name
3) we can't auto-generate a pin map when we don't know the pin names,
so don't try
2022-12-14 13:36:28 +00:00
af4e9968fc
Schematic: remove internal Change Sheet action from hotkeys
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13157
2022-12-13 13:55:23 -05:00
5e72a1008b
Schematic: don't trim unchanged segments that are connected
...
Previously if you had a wire with two unconnected ends and dragged the
end of another wire to connect with one end, it would delete the first
wire.
2022-12-13 09:03:23 -05:00
6eedbe4a14
Allow taking hidden fields into account for symbol unit bounding box
...
Even the GUI export of svg wasn't taking fields into account which rendered the fields regardless of status
2022-12-12 22:47:56 -05:00
243727428a
Selection: non-greedy box selection of wires ends only when dangling
...
See discussion:
https://gitlab.com/kicad/code/kicad/-/issues/13022#note_1205902448
2022-12-12 15:04:33 -05:00
d824b7f506
Schematic: move wires always moves the whole line
...
Discussion here:
https://gitlab.com/kicad/code/kicad/-/issues/13022#note_1205922621
2022-12-12 14:45:06 -05:00
5ce0fe5998
Selection: drop non-greedy full line selection from middle
...
It's too inconsistent to have greedy and non-greedy mode, and also have
tweaks to the non-greedy mode that make it greedier.
2022-12-12 14:45:06 -05:00
2459b61aa6
Don't add second half of line and new juction to screen twice.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13129
2022-12-12 13:44:47 +00:00
45eae3e594
Don't Simplify() polys with arcs in them.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13134
2022-12-12 12:54:34 +00:00
fbd2d66a75
Convert formatting constructs for SPICE consumption.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11383
2022-12-11 15:53:26 +00:00
f4fb70e04c
Schematic: re-allow partial selection of line ends
...
Also fix some XOR selecting issues.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13022
2022-12-10 13:17:42 -05:00
6535f407a6
Remove version guard from sim migration, and add migration to paste.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13080
2022-12-08 23:57:42 +00:00
0e75bf02fa
Selection: refactor modifier checking
2022-12-08 14:12:12 -05:00
4b02e5efb4
Schematic: allowing ctrl/shift-clicking point editor points
2022-12-08 14:12:12 -05:00
add082548d
Move timer used by SCH_EDITOR_CONTROL to member variable
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2430
2022-12-08 17:33:19 +00:00
6130ce5d66
symbol_editor_control: fix incorrect bounding in SVG export.
...
Fixes #13093
https://gitlab.com/kicad/code/kicad/issues/13093
2022-12-07 13:13:35 +01:00
5001555f0e
Fix crash in Altium schematic importer.
...
The crash was caused by an unhandled exception. The uncaught exception
caused a cacophony of null configuration setting pointers so guards were
added to prevent crashes should other exceptions occur that do not get
handled correctly.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13046
2022-12-05 20:20:01 -05:00
b7d41e0e56
Update simulator with NUMERIC_EVAL, decimal separator processing, etc.
...
Also includes fixes for instance data and resolving of textvar
references.
Also includes virtual d'tors for IBIS parser to get rid of all the
compile warnings on CLang.
Fixes https://gitlab.com/kicad/code/kicad/issues/12357
2022-12-05 12:40:29 +00:00
ef83d01455
Minor string changes: "eeschema" / "pcbnew" in tooltips, and power port terminology
2022-12-04 14:29:57 +00:00
96819f6c01
Better cache invalidation for text objects with references.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13059
2022-12-04 11:51:44 +00:00
8f646fa9fb
Schematic: fix XOR unselecting one end of fully selected line
2022-12-01 15:00:06 -05:00
5b2020daf5
Schematic: only delete dangling lines not created directly by the user
2022-12-01 13:13:45 -05:00
01cf6d76d8
Remove newly dangling lines when dragging
...
These lines are remnants from drag operations that should be cleaned
after commiting the new line positions
Fixes https://gitlab.com/kicad/code/kicad/issues/12870
2022-11-30 13:46:38 -08:00
0a62c17040
Remove schematic symbol value and footprint field instance data.
...
https://gitlab.com/kicad/code/kicad/-/issues/12933
2022-11-30 11:47:13 -05:00
4f4e355ce5
Reset existingRefs on cancel
...
When placing, we need to keep our static pointer map valid. If we
cancel the placement after annotation, we need to remove the annotated
symbol. The safer way is to just recreate the map
Fixes https://gitlab.com/kicad/code/kicad/issues/12983
2022-11-29 13:37:23 -08:00
b2177718a1
Tighten up refresh logic for net & netclass references.
...
Also tightens it up a bit for text variables which can reference things
like netnames and netclasses, but also board settings.
Fixes https://gitlab.com/kicad/code/kicad/issues/13032
2022-11-29 15:18:36 +00:00
7e0ba42f0e
Bug fixes for dragging labels attached to wires in orthogonal mode.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12677
2022-11-25 15:05:15 +00:00
651b3f1349
SCH_FIELDs are in parent's coord system.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12979
2022-11-23 13:22:50 +00:00
4a27d856f7
Move schematic sheet instance information into file sheet definition.
...
This will make it possible to maintain sheet instance information when
copying and pasting from any sheet other that the root sheet of a
project.
Setting and getting sheet page numbers must now be performed using a
sheet path. This was done to ensure that the instance paths were not
getting changed unexpectedly from different code paths.
2022-11-22 16:45:38 -05:00
e3cc0a5bc7
Prevent crashes when pasting symbols
...
When pasting a symbol that originates in a non-standard library, the
symbol may _only_ have an instance in the sheet and so adding it to the
sheet updates the instance data and needs to be refreshed before
annotating
2022-11-21 13:30:06 -08:00
12a55f20d3
Fix a mistake in grip margin.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12952
2022-11-21 00:25:19 +05:00
2919490e92
Use hash (not page no) to determine when we've found the current sheet.
...
Also enforces strict ordering in another page number sorter, although
this has nothing to do with the bug below.
Fixes https://gitlab.com/kicad/code/kicad/issues/12043
2022-11-20 13:12:44 +00:00
3747cae7dc
Reinstate marker searching.
2022-11-20 13:12:44 +00:00
b84066610e
Use drag origin instead of current mouse pos for drag checking.
2022-11-19 21:01:45 +00:00
bc271a8d15
Protect move tool from re-entrancy.
...
m_dragInProgress is usually sufficient, except when we haven't started
one yet. In any case, conflating the two is probably a bad idea.
Fixes https://gitlab.com/kicad/code/kicad/issues/12936
2022-11-18 17:08:38 +00:00
9d8fdd8d53
Fire selection events from SelectAll().
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12896
2022-11-13 22:59:21 +00:00
e8762da4f4
Revert "Support for variable references in SPICE models."
...
This reverts commit 95ebfeeed1672ce650a9
2022-11-07 19:37:40 +01:00
95ebfeeed1
Support for variable references in SPICE models.
...
Also fixes a couple of bugs where sheet instance data wasn't being
handled correctly.
2022-11-07 10:57:34 +00:00
5aa8f9880e
Honour aQuitOnDraw flag when cancelling a segment.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12832
2022-11-05 10:23:12 +00:00
504adb3467
Eeschema Back annotation: fix broken handling of full sheet paths of symbols.
...
Fixes #12767
https://gitlab.com/kicad/code/kicad/issues/12767
2022-11-03 11:15:23 +01:00
6a0db3e7e2
Fix Coverity warnings.
2022-10-26 14:39:44 -04:00
6c9d8f1ae7
GUI improvements to hierarchy navigator.
...
(1) and (3) from the linked issue.
Fixes https://gitlab.com/kicad/code/kicad/issues/11762
2022-10-24 23:00:44 +01:00
3cb6a80954
Don't delete pin out from under selection & move tools.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12610
2022-10-24 20:49:34 +01:00
4a489a5d16
Respect CTRL key when resizing rects and textboxes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12732
2022-10-24 11:36:20 +01:00
598b09821a
Coverity fixes.
2022-10-17 15:30:20 -04:00
f9a791e2b0
Copy font across when changing text type.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12629
2022-10-12 23:49:40 +01:00
8dea227da7
Special cases for sheet-pin dragging.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11949
2022-10-12 16:36:54 +01:00
3231bc5be3
Formatting and cleanup.
2022-10-12 16:36:54 +01:00
d9eb76eae0
Sim: Refactor SPICE_GENERATOR methods to accept a single SPICE_ITEM
2022-10-11 02:22:59 +02:00
1825905011
Replace more-than-half-line algorithm with greedy/stingy check.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10860
2022-10-10 20:23:48 +01:00
cb20a39693
Always select whole lines with greedy selection.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10869
2022-10-10 20:17:15 +01:00
994274fe9f
Move IBIS model Spice code generation to SIM_MODEL_KIBIS
...
IBIS drivers are temporarily broken. Will fix is subsequent commits.
2022-10-08 03:01:52 +02:00
a5da46459c
Be sure to update UUID when placing new elements
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12588
2022-10-07 16:32:41 -07:00
b95f4ec6bb
Sim: Use the new library manager class in Spice netlist exporter
...
Temporarily comment out IBIS processing.
2022-10-06 09:49:29 +02:00
44799c830d
Sim: Create a class to manage sim libs and inherited models
2022-10-05 17:19:28 +02:00
03d847118a
Fix crash when copying symbol in schematic editor.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12574
2022-10-04 17:51:58 -04:00
c5f8587898
Use closest point for duplicate anchor rather than top-left.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10004
2022-10-03 23:28:58 +01:00
7bb0275d3c
Fix incompatibility with old rubber-band wire algo and new ortho wire drag alog.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11948
2022-10-03 22:12:23 +01:00
c6284f4835
Formatting.
2022-10-03 22:12:23 +01:00
e335c1c612
Fix for LIB_TREE hotkeys over canvas and possible fix for over LIB_TREE itself.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11034
2022-10-02 22:22:21 +01:00
c089afb408
Improve default net pattern to be all members of bus instead of first member.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12546
2022-10-01 22:58:11 +01:00
c1da59b560
Swap: disallow swapping tracks / wires
...
Also fix missed shortcut change for S -> Shift-S
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/12538
2022-09-29 17:04:43 -04:00
df59f6cfdb
Update connectivity for net highlighting on demand.
2022-09-27 21:24:01 +00:00
83a7ab2449
Initialize resolved status of newly created wires during drag operation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12522
2022-09-27 14:12:06 +01:00
d0ff90eb6e
Support mirroring of multiple SCH_FIELDs at once.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12512
2022-09-26 17:44:52 +01:00
2089374f53
ADDED: Export symbols from schematic to library
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11433
2022-09-23 21:23:01 -04:00
f75266d130
Keep selection order in SCH->PCB cross-selection.
2022-09-22 11:43:37 +00:00
e4865ce543
Excise wxString from simulation
2022-09-22 07:41:52 +02:00
fc10db25ba
Netclass directive and label conversion improvements.
...
1) Copy label fields when converting.
2) Don't assume netclass directive should be net name -- this is very
unlikely.
3) Don't show font controls in Netclass Directive Properties dialog --
there's no basic text associated witha Directive Label.
2022-09-22 01:22:19 +01:00
8eb68ee472
Add pin/unpin context menu to Symbol Chooser and Footprint Chooser.
...
Also moves some more code down into common so it can be shared.
Fixes https://gitlab.com/kicad/code/kicad/issues/12384
2022-09-21 14:45:12 +01:00
fd4cd17f4f
fix a compil warning
2022-09-20 18:55:20 +02:00
30a4d3d2de
Coverity fixes.
2022-09-20 00:19:15 +01:00
5990595619
When adding a bitmap, do not clone it during moving.
...
Cloning is not necessary, and is memory consuming.
2022-09-19 17:41:47 +02:00
9304607624
TOOL_EVENT: make command string non-optional
...
We're getting segfaults in places where this isn't checked. Also, add
some asserts so we can catch bad tool push/pop.
Removes all uses of GetCommandStr() and makes it private.
2022-09-19 10:23:09 -04:00
45d6b4a9fc
Readability improvements.
2022-09-19 11:18:20 +01:00
63295cfb9e
Remove unused vars
2022-09-18 08:49:07 -04:00
e6c8cf0f03
Don't escape spaces in bus groups and transfer hyperlinks.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12451
Fixes https://gitlab.com/kicad/code/kicad/issues/12452
2022-09-17 20:56:50 +01:00
Ian McInerney
Jeff Young
Jon Evans
Ian McInerney
Wayne Stambaugh
Seth Hillbrand
Steve Bollinger
Marek Roszko
Mike Williams
aris-kimi
qu1ck
jean-pierre charras
Alex
Chris Morgan
JamesJCode
vinsfortunato
James Jackson
Roberto Fernandez Bautista
Barabas Raffai
Graham Keeth
Mikolaj Wielgus