Remove wires, junctions, and bus entries from tree. These objects make
the net tree noisy for complex nets. Until a sane way to group these
objects can be, remove them for now.
Fix tree expansion and debug assertion issues.
- Correctly find the library paths for new and old LTspice versions
- Use case insensitive comparison (store element names as lower case in the map)
- Better search paths
- Allow user to copy contents of LTspice "lib" folder to the same folder as file being imported
Partially addresses https://gitlab.com/kicad/code/kicad/-/issues/15061
SCH_COMMIT::Stage() can handle promoting the parent, but then the pin
needs to be removed first. I think it's probably clearer if we just
do the promotion in the delete routine.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15129
This is required to keep selected and brightened state across undo.
It's also probably required for things like IS_SHOWN_AS_BITMAP and
possibly ENTERED. FWIW, most BOARD_ITEMs do a straight swap, including
the temp and edit flags. But that seems like a risky change....
Also removes SyncView() call from Undo/Redo as that does a MODEL_RELOAD
which clears the selection.
Also fixes a bug where zooming doesn't get a redraw until mouse moves.
Also fixes a couple of bugs where dangling markers on SCH_SHEET_PINs
and SCH_HIERLABELs weren't getting drawn.
Also simplifies drawing algorithm by removing aesthetic offset (which
wasn't implemented when pin is drawn as part of selection VIEW_GROUP).
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15129
CHANGED abandon the unpredictable behaviour of the Simulation Command
dialog. You now separately add simulation tabs (which have invariant
command types once created), and the dialog edits the current tab.
Also a bunch of bug fixes to make multiple simulation plots actually
work.
You must first check the checkbox in the Simulation Command dialog,
after which the signals will appear in the User Defined Signals
autocomplete lists.
SCH_EDIT_FRAME::SetCurrentSheet( xxx ) was used to switch to a sheet, but
SCH_EDIT_FRAME::SetCurrentSheet() has side effects to the current VIEW
(clear some data used to show the sheet on screen) and does not fully
restore the "old" screen
SCHEMATIC::SetCurrentSheet( xxx ) is now used to switch to a sheet
Also moves EE_POINT_EDITOR to SCH_COMMIT. (There was another refresh
bug in RollbackSymbolFromUndo() -- whose only caller was the
EE_POINT_EDITOR's old undo code).
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14274
Note that "immediate" doesn't mean quite the same thing: while it will
enter the tool immediately, it won't necessarily finish the tool during
the call if the tool has an event loop. So for something like Rotate
"immediate" and "synchronous" have the same behaviour, but for something
like Move they do not.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15085
The text box used a different enum than the shapes, so this leads to a
possibility of clashing. The new action framework flagged this problem,
so modify the tool to handle the shape types properly.
Fixes KICAD-2CJ
Using a boolean argument just leads to a lot of trailing booleans in the
function calls and is not user friendly. Instead, introduce PostAction()
to send an action that runs after the coroutine (equivalent to passing
false or the default argument), and leave RunAction as the immediate
execution function.
Also fixes a bug where Convert Symbol wasn't undoable.
Also cleans up some SetModified() call no longer needed with SCH_COMMIT.
Also fixes bug where revert of a modification didn't update the screen's
RTree.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15030
Using std::any from C++17 allows for proper type handling in the
parameter field, removing the need for casting to void* and then casting
the void* to the desired type.
While a SCH_SHEET does indeed have a SCH_SHEET parent, it's not one of
the children that gets added as a CHT_MODIFY of its parent.
Also fixes a bug where the newly drawn sheet gets removed from the
preview before running the dialog.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14976
Note: This changes the net highlight tool behavior. When clicking on an
already highlighted net, the net highlighting is no longer toggled
off. This prevents the net navigator panel from being cleared.
The API is needed for wxFormBuilder, and I couldn't figure out any
way around it, but we can at least reduce the risk of someone calling
it accidentally (again).
This change allows for infinite inheritance depth so internally there is
no limit to deriving library symbols from other derived symbols. Please
note that the Flatten() method now recurses until a symbol with no parent
is found. The user interface is not hooked up at this time.
Before, an improper symbol (one without the starting toekn) weren't
detected and reported to the user properly and would instead assert. Now
properly detect these and pass the error up the stack to the tool.
(Sentry issue KICAD-21J).
The connection graph should only be updated within the commit structure
because this is the only time the connectivity should be changed. We
want any connectivity changes to be included in the commit as well, so
this should be stored prior to the undo/redo list mods
We have to draw the parent symbol on the union of all layers that
its children might reside on, but we only want to draw each child
on its layers.
And we need to make sure LAYER_PRIVATE_NOTES gets into the layers
order list.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13943
We don't really control when these are called, so best not to assume
we've finished initialization of the frame/screen/document/whatever.
Possible fix for KICAD-KY.
- Expand tree and highlight object selected with net highlight tool.
- Expand tree and highlight object that are currently highlighted with the
selection tool.
- Use more descriptive object text rather than menu entry text for tree
strings.
- Rebuild tree on unit changes.
Note that this only works where a BOARD_COMMIT or SCHEMATIC_COMMIT is used.
(BOARD_COMMIT is used almost universally in PCBNew, but SCHEMATIC_COMMIT
has very little adoption in EEschema so far.)
Aliases in bus resolution were being resolved without a path, making
them effectively global nets. This applies the corrected path to the
bus members and adds a QA to catch this error
Late bind the range selection event so we don't lose our selection as a
result of loading data into the table, then jumping to the selected
value.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/14186
Arrange connectivity items by sheet. Complex nets which span many
sheets make finding objects difficult. It also provides a higher
level of sheet view granularity.
(They were only getting drawn on top of the selection shadow when
drawn by their parent symbol because LIB_FIELD was correctly
setting the view layers but SCH_FIELD was not.)
When editing or viewing library symbols, the files are watched for
underlying changes. If any occur, the user is either prompted to reload
(if reloading would overwrite their current edits) or the file is
silently updated to the current version on disk.
This also sets a custom assertion handler to avoid unneeded crashes when
recieving invalid SAMBA packets and turns off assertions entirely when
running in release (non-debug) mode
We don't need to lock in import because we are creating a new file. We
should, however, show the locking user/machine when opening in schematic
editor and take over the lock if they want to proceed.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9347
Use COMPARE_FLAGS::EQUALITY and COMPARE_FLAGS::ERC when doing
library diffs.
Also fixes a few more cases where we weren't checking for -1 when
doing a fieldID < MANDATORY_FIELDS.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14830
Also fixes a bug where we didn't triangulate at all when the char
count didn't warrant the likely overhead of spinning up a
thread_pool.
And fix another bug where EDA_TEXT::GetRenderCache() wasn't using
the given font.
Also reverts using the cache for drawing-sheet text. The text
items are created from scratch from the data items each time
they're drawn, so there's never an existing cache to make use of.
Instead, we now check that the item is in the view, using a very
approximate bounding box generator (because even generating a
real bounding box shows up large in profiles).
And, lastly, fixes a bug where EndPos was never considered in
DS_DATA_ITEM::IsInsidePage().
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14822
1) Don't fracture font glyphs when generating them; we're going
to fracture during triangulation anyway.
2) Don't check for self-intersection when deciding to fracture.
It costs nearly as much as the fracture does.
3) Cache drawing sheet text.
4) Use the current font when checking for cache validity.
5) Parallelize glyph triangulation.
6) Don't invalidate bounding box caches when offset by {0,0}
7) Use the glyph cache when generating text effective shape.
8) Short-circuit NormalizeJustification() if its center/center.
9) Don't triangulate for GuessSelectionCandidates()
10) Avoid sqrt whenever possible.
11) Pre-allocate bezier and SHAPE_LINE_CHAIN buffers.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14303
Also removes auto-closing of blocking dialogs when inserting
symbols from the Symbol Editor or Chooser, preventing the bug
that QuasiModel was removed for earlier.
Also fixes a non-initialized parent pointer when the TextBox
Properties dialog was called from DrawShape().
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14777
Temporary and autosave files do not neccessarily have the correct
permissions set to replace existing project files. This updates the
permissions to match the existing values where possible
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13574
wxSingleInstanceChecker is meant for running programs, not file locking.
This implements an RAII class for file locking that stores the lock
files next to the file being locked, allowing it to be easily found and
removed. Also includes the ability to override the lock, with
information about the original owner
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14734
Spice parameters were converted to lower-case before comparison. This is incorrect, as it
is legal and common for spice parameters to contain capital letters (e.g. potentiometers
typically use Rt and SET as their parameters).
Spice parameters are not case sensitive, so the correct behaviour is to instead do a
case-insensitive comparison on the parameter name.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14793
[ADDED]: A panel to the schematic editor that allows quick access to all
of the items connected to the currently highlighted net.
This is an initial swag at implementing a full net navigator feature. For
now it only shows the currently highlighted net nodes. The incremental
net list advanced setting must be enabled in order to use this feature due
to performance reasons. There are still some issues with saving the panel
position which will be addressed in the future.
Initial code for serializing wxAuiPaneInfo settings to and from JSON have
be implemented.
Change teardrop generation to rely more heavily on BOARD_CONNECTIVITY
for improved performance.
Add updating of teardrops on BOARD_COMMIT::Push().
Also converts m_CopperItemRTreeCache to std::shared_ptr.
We don't copy it around anyway, and having to create a new set
of std::unique_ptr's for each operation is likely to be more
expensive than std::shared_ptr's overhead.
- honor mirroring of fields attached to labels (all types)
- fix incorrect orientation of the graphic shape of SCH_DIRECTIVE_LABEL items
after mirroring the item.
Fixes#14758https://gitlab.com/kicad/code/kicad/issues/14758
Version 7 text alignment changed subtly for stroke fonts from version 6.
Additionally, the output has been different between screen and plotting,
leading to offset text in plotted output relative to the text shown on
screen.
This introduces a fudge factor in FONT::getLinePositions to correct the
offset in the plotting output relative to v6.
This also changes the SCH_PAINTER and PCB_PAINTER to correct the
relative offsets between GAL and PLOTTER classes. The source of these
offsets is atm unclear.
Fixes https://gitlab.com/kicad/code/kicad/issues/14755
SCH_CONNECTION objects are temporary and can become stale any time the
connectivity is updated. Keeping them around to reference later is a
bad idea. Even if the object pointer is still valid in an SCH_ITEM in
the undo/redo buffers, comparing the pointer against another pointer as
a test to see if they are the same connection is not valid. Saving the
connection name is safe and ensures the connection is the same even if
the pointers differ.
The propagation is currently (maybe not needed) limited to the global
name that is the source of the change. We also need to propagate the
global name that is changed in case the global is set in a tree leaf and
not the root
Fixes https://gitlab.com/kicad/code/kicad/issues/14657
A sheetpath is required to correctly resolve text variables.
Depending on currentSheet is rife with bugs.
There are many places where we do *not* want to be prepending
field names to the field values, such as netlisting,
building PDF hypertext menus, etc.
Also, Find/Replace needs to work on unresolved text, as
that's what we're going to display (and if replace nuked
your variable references you wouldn't be happy).
The netlist exporter was never updated to exclude symbols that are
tagged as power symbols. Only the legacy power symbol name prefix
('#') was used as the power symbol check. Power symbols no longer
require the '#' name prefix.
Needs to be static, so keep the reference from the associated symbol and
not the SCH_SYMBOL instance. Both will likely have the same prefix,
which is all we care about here
We're going to use the dataStore to update the symbol, so
if we store resolved values it will nuke any text variables
even if the field wasn't edited.
Not sure if the BOM generator has a separate resolve-variables
step or not. But it will need one as the code removed here
only worked for Values and Footprint fields anyway.
Fixes https://gitlab.com/kicad/code/kicad/issues/14423
This ensures that when bus elements or labels matching bus elements are
removed that the stale neighbor/parent references are similarly removed
Matching 7.0 commit 4cdf75dc72
The undo command has accreted a number of things over the years. This
prunes back the changes to the minimum required number and correctly
orders the actions
Fixes https://gitlab.com/kicad/code/kicad/issues/14661
Also simplifies the scoring algorithm so that it only
differentiates between exact-match, match-at-start and
any-match. The rest of the position-based matching
stuff is gone, as is the knowledge of the name vs the
keywords vs the description. All that is left to the
provider of the weighted search terms array.
- SCH_SYMBOL::GetMsgPanelInfo(): slighly change the displayed lines to allow
longer strings in Description and Keywords
- panel_setup_rules_help.md: fix incorrect html link (URI), creating ERR 404
Provides a single-point access for modifying the schematic and symbol
elements that allows chaining updates and reverting partial changes.
Standardizes the undo hierarchy between pcb and schematic editors
As this is another layer on the existing undo/redo structure, the
initial commit does not replace all undo/redo calls currently existing.
These will be handled in a series of follow-on commits
- Ensure a change in plugin type is detected
- do not force automatic plugin type selection for *.lib files that need
an access to these libraries: they can be not always available.
For legacy libs ans cadstar libs the extension is .lib.
So we need to read the header of the file, and therefore expand the env var inside
the filename, if used.
1) Don't read libraries multiple times
2) VDMOS default is nchan if not specified
3) In the absence of a workbook default to LTSpice compatability
4) Don't attempt to write out a model line for a subckt; it never has
a baseModel
in GetMsgPanelInfo() (PPI, scale).
m_image name was confusing: it is not a wxImage, but a BITMAP_BASE item,
and m_image name was already in use in BITMAP_BASE, used inside SCH_IMAGE.
Bitmap properties dialog: show PPI value and add Title to dialog.
- Ensure that critical paths (ERC/netlister) are fully-rechecked
- Handle symbol/pin distinction in change markers
- Fully connect hierarchical pins in one pass descending
Previously, almost all connectivity updates were full updates, meaning
that the entire connectivity graph would be rebuilt each time a change
was made to the schematic. This update modifies the update to only
correct the subgraphs that are directly affected by the change.
It uses the existing connection graph to find all affected subgraphs as
well as connections to the changes based on the visible schematic.
These elements are removed from the existing connectivity graph and
marked dirty. They then have a new connectivity graph built only around
their changes. The resulting graph is merged into the original.
Currently, this ability is behind an advanced config flag
`IncrementalConnectivity` while testing.
Fixes https://gitlab.com/kicad/code/kicad/issues/10846
Fixes https://gitlab.com/kicad/code/kicad/issues/1794
Settings loading needs to account for potential chaining, so each
instance should be created before being Load()ed. Additionally, add the
settings loading to QA
Settings should be initialized on start-up. This removes the option of
lazily loading the settings from file and instead requires all settings
needed to be loaded on KiFACE start before requesting data from the
settings object
Adds maximum step size setting used by transient analysis solver,
and 'use initial conditions (uic)' setting. Enabling uic disables
DC operating point analysis and may introduce singularities. It requires
a careful selection of initial conditions of circuit elements.
Fixes https://gitlab.com/kicad/code/kicad/issues/2515
- Ensure the first field in m_fields has id = 0 to be seen has hypertext
(it was not the case after reading a .kicad_sch file)
- when converting this item to another label/text, remove this special Field
from the copied field list to the converted label.
* Add check for valid symbol library link in annotation code to prevent
crash even if the symbol was not defined correctly. This will assert
in debug builds.
* Fix broken pin comparisons when library symbols have units with alternate
body style defined.
* Remove some macros from LIB_SYMBOL comparison function which made
debugging painful.
* Exit LIB_SYMBOL comparison function as soon as non-equivalent comparison
occurs.
* Fix broken library symbol comparison due to name differences when
checking for existing variants of the library symbol.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14491
The spacemouse driver, particularly on Mac, is extremely unstable and
causes crashes even when not being used. This places the interface
behind an advanced config flag to ensure that users can affirmatively
opt-in to the potential for crashes
This reverts commit 33da9b2327 and the
following commit dc08c48f33.
C++17 changed the behavior of static class member variables that are
constexpr defined. Previously this definition/declaration split was
valid for constexpr members, but after C++17 the static constexpr member
variables are automatically inlined, so the declaration is no longer
exported in some compilers (GCC 9/10/11 seem to have problems).
An alternate way of constexpr member variables is putting the
initialization in the class definition, but we can't init a COLOR4D
object when defining the COLOR4D class.
For now, revert this change until we can figure out the proper way of
architecting these colors.
This library is meant to move non-EDA items (language extensions,
library extensions, etc.) into the lowest-level of our dependency chain.
This library should never depend on anyother non-thirdparty code in the
kicad codebase.
Previously, bus elements that were not instantiated as individual nets
could not connect to each other. This caused issues for complex
schematics where busses needed to connect to other busses with elements
that resolved to the same net names. Functionally, this means mixing
bus elements, which we will replace with first-class elements in version
8 but currently can only be accomplished either by using bus aliases and
this patch or by individually instantiating each bus element as a
local label
Fixes https://gitlab.com/kicad/code/kicad/issues/14300
Mike Williams
Alex Shvartzkop
Jeff Young
Wayne Stambaugh
jean-pierre charras
Roberto Fernandez Bautista
Ian McInerney
Fabien Corona
Marek Roszko
Ian McInerney
Jon Evans
Seth Hillbrand
Youbao
Erik Agsjö
Kuba Sunderland-Ober
CraftedNightmare
Steve Bollinger
Mark Visser
Graham Keeth
Okan Demir
aris-kimi
qu1ck
Stefan