5ba2896968
enclosedByArea test for zone needs to be outline-based.
...
(Otherwise it's order-specific when filling, which
is pretty unpredictable.)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/18202
2024-06-15 17:52:15 +01:00
eae85742cc
Don't report reasonable solder mask bridges in a net-tie footprint.
2024-06-15 15:57:13 +01:00
fa235116f7
Import Altium via tenting settings
2024-06-15 09:36:25 -04:00
16e708a0e7
Fix minor compil and Coverity warnings.
2024-06-15 11:20:21 +02:00
3e16359b4f
Update golden master for Altium import
...
The altium footprint being imported has vias that were ignored before,
so now we need to have the correct golden master with vias
2024-06-14 17:41:44 -07:00
f7450e5b37
Fix SWIG compile
...
SWIG doesn't like a lot of the new C++20 elements, so fall back to basic
cast that should get almost every case
2024-06-14 17:41:05 -07:00
6df16d053e
Add specialization for unsigned scalar add/sub
...
Adding/subtracting an unsigned scalar to a signed vector should maintain
the same signed vector
Fixes https://gitlab.com/kicad/code/kicad/-/issues/18212
2024-06-14 17:27:59 -07:00
7ea013b96c
Altium: Handle footprint vias
...
These are treated as pads in KiCad
Fixes https://gitlab.com/kicad/code/kicad/-/issues/18194
2024-06-14 16:49:56 -07:00
021f251efd
Tented usually means that there is no soldermask
...
Probably was a typo
2024-06-14 16:49:56 -07:00
d21eba4021
Unselected tree before syncing
...
On GTK, the selected item is checked for its parent when being
unselected. This breaks if the parent has been removed by the Sync()
call, so we need to ensure that the unselect all call happens prior
2024-06-14 16:49:56 -07:00
9f4dfe77cb
Freeze the adapter to avoid invalid deref
...
GTK tries to get the parent item of selected elements when unselecting.
If we don't freeze, we run the risk of crashing if a selected item is
removed before being unselected. This causes a wx warning but a) this
is suppressed in release and b) warning message is better than crash.
See next commit for fix to avoid common case of the error
2024-06-14 16:49:56 -07:00
db9f0a0358
Report footprint parent of shape when in board editor.
...
While the user can't select these, we do report them
in DRC messages and the like, where it's handy to
know what they're from.
2024-06-14 23:19:26 +01:00
8cddd40fc9
Check mask apertures on the mask layer.
...
(Otherwise testing A:B and B:A will add items to the
m_maskApertureNetMap cache on different layers.)
2024-06-14 22:55:40 +01:00
b2588e0bbf
Footprint Editor doesn't have nets.
...
(Copper shapes, on the other hand, can. Since we use
GetItemDescription() to report DRC errors and the like,
it's better to have it report the net even when it's
<no net>.)
2024-06-14 22:46:29 +01:00
0f8d543172
Consistent capitalization.
2024-06-14 22:02:08 +01:00
ac576d7e0a
Normalize phase angles.
2024-06-14 19:03:55 +01:00
a2cbd1ff21
Fix QA tests compatibility
2024-06-14 19:14:09 +02:00
c633ac26eb
Don't lose value of cursor checkboxes when running sim.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/18205
2024-06-14 16:37:49 +01:00
4eb048bba2
Don't assume AC gains will always be voltages.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/18205
2024-06-14 16:37:49 +01:00
300313ce73
Correctly write phase/gain signals to workbook.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/18205
2024-06-14 16:37:49 +01:00
5a3bad51d0
Don't use SI prefixes with degrees when auto-ranging.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/18205
2024-06-14 16:37:49 +01:00
7b63429fe1
Current gain is the first Y axis, not the second.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/18205
2024-06-14 16:37:49 +01:00
d778cb6647
Schematic editor: fix some issues that can crash the editor on closing.
...
- Add a test to be sure a SCHEMATIC exists before trying to use it
- Delete items in Repeat list and undo/redo list before deleting the schematic
- Delete also these items when loading a new schematic (the repeat list was
not cleaned previously)
Before these fixes I see a use after delete issue due to dangling pointers
stored in Repeat list.
2024-06-14 16:57:57 +02:00
7fef6e8d83
Use view's RTree for redrawing netnames.
2024-06-14 00:20:37 +01:00
c9ddcd618d
Make sure to reset the cached viewport.
2024-06-12 23:35:06 +01:00
ccc76aad2f
Fix typo loading legacy tenting setting
2024-06-12 17:42:44 -04:00
44a33eedf4
Update only visible track segments in redrawNetnames.
...
RequestRefresh doesn't seem to be needed.
2024-06-13 00:28:37 +03:00
f0e9f9f15a
Optimize PAD LoD calculation.
2024-06-12 23:05:33 +03:00
52daf14c78
Optimize VIA LoD calculation.
2024-06-12 23:05:33 +03:00
9d0ee029bc
Add a upper >= lower check to Clamp.
...
Similar to std::clamp.
2024-06-12 23:05:33 +03:00
e49d233923
Move BOX2I_MINMAX to separate header.
2024-06-12 23:05:33 +03:00
a5e2615251
Revert "SCH/LIB SYMBOL: never allow null LIB_SYMBOLs in SCH_SYMBOL"
...
This reverts commit 0b187e7122
2024-06-12 13:30:29 -04:00
0c45f85bc0
Revert "sch_symbol: use fail message fall back to dummy symbol when passed null"
...
This reverts commit e0e837189d
2024-06-12 13:30:29 -04:00
0ca7a81181
Deferred redraw for netnames.
2024-06-12 17:20:20 +01:00
b7161181e8
Hidden footprint libraries are not yet supported.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/18183
2024-06-12 16:59:20 +01:00
73a3b880a6
Slightly optimize GPU_CACHED_MANAGER::DrawIndices.
2024-06-12 16:04:47 +03:00
694a7db457
Performance improvements.
...
Don't construct a wxString or a LSEQ when you don't
have to. They're both more expensive than you might
think.
2024-06-12 11:06:10 +01:00
63cd110720
Make verbiage more clear
2024-06-11 22:19:33 -04:00
896f56772f
Fix warnings
2024-06-11 22:01:06 -04:00
5fc0f1f51e
ADDED: Independent control of front/back via tenting
2024-06-11 21:50:25 -04:00
4aab9f59aa
ADDED: Support tenting control of individual vias
...
REMOVED: Tenting option from plot dialog (tenting is now
controlled from Board Setup and via properties)
See https://gitlab.com/kicad/code/kicad/-/issues/2402
2024-06-11 21:25:02 -04:00
2a37580839
Symbol editor: ensure the left panel is correctly refreshed when hiding a pane.
2024-06-11 17:48:25 +02:00
d865bda4f2
Cache display netnames.
...
Also changes the redraw behaviour to not try and redraw
only when things entered the view (this didn't work
because it may be the netname that's entering the view,
not the whole track). Instead we only process a finite
number of tracks on each idle event (in order to avoid
#12436 ).
Note that we don't need the timer at all anymore as the
netnames are in fixed locations on the track and never
make the track look like it's being dragged.
Also improves performance by avoiding sqrt.
2024-06-11 16:30:52 +01:00
74070afbc6
Fix a bunch of GCC build warnings compiling the schematic editor.
...
Apparently GCC does not like competing definitions of the == operator.
The recent refactoring away of all LIB_ITEM objects created a conflict
with the SCH_ITEM == operator definition. This change required some
rather ugly comparison changes. There were no unit test failures but
that doesn't mean something didn't get broken.
2024-06-11 08:07:32 -04:00
9bf0b479ed
fix a compil issue on msys2
2024-06-11 10:58:21 +02:00
44fd13af47
Slight optimization for PCB_PAINTER when drawing vias/tracks.
2024-06-11 05:30:02 +03:00
8dd93501cf
Add additional VECTOR2 tests
...
Check overflow, addition using alternate value representations and
clamping
2024-06-10 15:21:44 -07:00
37191720ca
Add common VECTOR2 test cases
2024-06-10 15:12:57 -07:00
439c25fca9
Altium schematic parser: Add fraction pin placement
...
In the schematic libaries, pin positions that are off 10mil spacing need
fractional elements stored in a different location
2024-06-10 15:02:18 -07:00
35d60598d5
Fix build error on MSVC.
2024-06-11 00:06:32 +03:00
Jeff Young
Jon Evans
jean-pierre charras
Seth Hillbrand
Alex Shvartzkop
Mike Williams
Wayne Stambaugh