In the file format, the 'mirror' tag is optional (not written unless on)
so we cannot default the new text to 'mirror' on just because the
footprint is on the back layer as it won't be turned off by the
footprint loader.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17546
The router needs to elimitate duplicate points but keep colinear
segments. This re-creates the partial routine from the old Simplify()
function
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17582
Knockout text should only prevent filling directly around the text
itself, not the larger anti-text fill around it. This prevents minimum
width provisions from kicking in unneccesarily
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17665
Fixes issue where if the net inspector was open when a board was
loaded, the track data would not be updated until a board edit
action triggered an update.
Required for net inspector otherwise composite operations (such
as undo / redo, and length tuning) can result in multiple add /
remove events firing which results in inconsistent length state.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17527
(for 9.0)
Also handle 0-width columns coming in from settings. GTK seems to have
an issue where these columns are impossible to resize even if they are
made visible.
The dummy track in the merge colinear segments is used to overwrite the
original segment with the changes at the end, so the group must be
removed before leaving the function, and can't be removed at creation.
Fixes KICAD-74M
If there is a small hole (smaller than the conn width), we can loop
around in a circle checking all points and not move past the mimimum
distance.
To avoid this, if we detect a loop, we exit the substantial checker.
This should return with true because a large hole will return true and
we are only checking to see if there is a minimum amount of copper
between two open areas
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17527
This is required as during an undo / redo operation, rebuilding
the previous selection can result in a group / generator being
selected as well as all of their contained items. This prunes
the contained items to remove the possibility of a double-delete.
Most of our pointers will share the top 32 or more bits of their pointer
addresses, making cache collisions highly likely. This uses a hash
combiner to mix the bits more effectively
The clearance epsilon should not be used to limit which force elements
we return in the query. Otherwise, we can drag elements into a
DRC-violating space
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16293
Also fixes some bugs with property exposure that (along with
other things) allowed you to put table cells on a different
layer than their parent table.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17438
Pcbnew can hang for a long time when undoing operations involving
large numbers of board items. This provides an interim workaround
(and replicated the behaviour of the search panel) by only
computing track statistics updates incrementally if the inspector
is displayed.
Partially fixes https://gitlab.com/kicad/code/kicad/-/issues/17561
(if net inspector is not shown)
This behavior is generally undesirable and was only needed
because of past limitations. Now we only split a track
when the user places a via directly on top of it.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16456
The behavior of the measure tool is influenced by the
horizontal/vertical/45-degree mode, but the context menu of the measure
tool lacks an option to toggle this mode. In contrast, the drawing
tools are also affected by this mode, and their context menu has the
item to toggle this mode.
We can't assume that the ignored connection exists when trying to set
the junction size. We use int_max for the default instead of 0 so that
later, we don't try to create a minor track with 0 width in loadNets()
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17523
- Includes GTK crash fix from a5ef4f1b
- Additionally removes an unneccesary re-sort when rebuilding columns
- Correctly saves column state when using pcbnew standalone
Introduces some updates to the inspector, and a number of bug fixes:
- Correctly handles changes in board stackup
- Correctly handles unit change events
- Correctly handles language change events
- All layout / panel settings are stored to the project settings
- Retains ability to create net report
- Simple filter searches on net name and net class name (stored in settings)
- Allows hide / show of columns (stored in settings)
- Grouping by netclass (stored in settings)
- Optional filtering by net name (stored in settings)
- Optional filtering by net class (stored in settings)
- Custom grouping by net name match
If a separate viewer frame is selected, the footprint chooser always shows
the footprint and the 3D shape is shown in a 3D viewer frame if the 3D view
is enabled.
This was a crude hack that appends the library URN ordinal to the name of
the footprint so that it can be correctly looked up by the "element" node.
The Eagle XML DTD does not make it clear how the URN "ASSET_ID" and
"VERSION" are used to look up the appropriate "ASSET_TYPE" so this is a
best guess and seems to work correctly.
The inferred edge clearance dialog had to be disabled when importing third
party boards because on GTK (and possibly other platforms) the dialog would
completely hang KiCad preventing the imported board and possible schematic
from being saved.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12897
Between schematic and pcb editors, we want the following actions:
- Single click on ERC/DRC item should show the item in the ERC/DRC
window. But if the window is not visible, it should only update the
status bar
- Double click on ERC/DRC item should show and raid the ERC/DRC window
as well as select the line item
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17383
This does 3 things:
1) Removes unused zone layers on load
2) Does not save unused zone layers
3) Removes unused zone layers from connectivity calculation
(1) Prevents existing boards from using unused zone layers for any
connectivity or rendering. (2) Updates the contents of boards with
removed zone layers to prevent them from propagating. (3) updates the
connectivity while running pcbnew and removing a zone layer
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17288
QR codes allow 4 different levels of error correction. By increasing the level, larger numbers of data bytes can be corrupted without invalidating the code
The clearance between two zones could be rather slow. This was in part
to trying to do triangle-triangle collisions between zones when we only
need outline collision and in part to the shape_line_chain collision
routine. The shape_line_chain collisions don't need to recreate
segments on each iteration and should instead create them once and using
this to check all collisions
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17327
* To select a footprint info, Use the bbox with not text as selectable area
* Fix also incorrect position of footprint bbox when plotting with offset
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17355
Also adds support for tabbing between table cells in the
table editor dialog.
Also adds support for calling the table editor dialog from
edit properties on a table selection.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17337
When selecting two objects, we display the measured clearance between
them. This can be problematic with large zones as they have thousands
of triangles.
This is a temporary fix for 8.0.1 to disable the check until we have a
performant version
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17327
Max clearance is updated by IncrementTimeStamp(), which is called when in the FOOTPRINT dtor and ZONE dtor. This can cause issues when iterating over all footprints as the footprints may be delete-ed
Fixes https://gitlab.com/kicad/code/kicad/issues/17269
For consistency with the other panels, removes the circular 'x' close
button from the search panel. Toggling visibility remains possible
through the View menu
instead of corner radius.
The corner radius comes from corner radius ratio, so saving/restoring the corner
radius can create rounding errors when trying to recalculate the ratio from the radius.
CHANGED: Automatically selects the right pad type for the footprint type. Resets the pad properties if the master pad properties do not match the pad type.
https://gitlab.com/kicad/code/kicad/-/issues/16563
We only need the UI update and mouse/keyboard while updating our DRC
window. Waiting for other events gets into a race condition with the
schematic editor that can cause a hang
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17003
Short description:
Works for Symbol and Footprint Editor behind an advanced config option.
For Symbol Editor it is shown for a single item selection (library or symbol).
For Footprint Editor it is shown for a footprint selection.
(fp editor allows a single tree item selection only).
Option stays hidden if current frame has been modified.
Also small fix(?) for similar action to the project manager.
(Call for the Execution has moved inside the file loop.)
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/15736
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16908
ADDED: Context menu item in PCB appearances widget to import netclass
color from schematic.
ADDED: Context menu item to reset PCB netclass color (replicating
same menu item from Nets inspector)
When moving a unique_ptr, you are actually passing the object, not a
reference to the object. So we either std::move with the bare
unique_ptr parameter or we pass a reference. But we should never pass
an rvalue reference for this or we'll make a copy without holding the
tracking (because it was moved)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16839
Marek Roszko
Seth Hillbrand
Alex Shvartzkop
Mike Williams
qu1ck
Jon Evans
JamesJ
Jeff Young
jean-pierre charras
Ian McInerney
Roberto Fernandez Bautista
Thomas Pointhuber
wh201906
aris-kimi
Jan Wichmann
Wayne Stambaugh
SubaruArai
Armin Schoisswohl
Yon Uriarte
Jan Wichmann
Ethan Chien