Commit Graph

69 Commits

Author SHA1 Message Date
Seth Hillbrand 27add591ec Add Clipper2
Currently this lives behind the advanced config flag `UseClipper2`.
Enabling this flag will route all Clipper-based calls through the
Clipper2 library instead of the older Clipper.  The changes should be
mostly transparent.

Of note, Clipper2 does not utilize the `STRICTLY_SIMPLE` flag because
clipper1 did not actually guarantee a strictly simple polygon.
Currently we ignore this flag but we may decide to run strictly-simple
operations through a second NULL union to simplify the results as much
as possible.

Additionally, the inflation options are slightly different.  We cannot
choose the fallback miter.  The fallback miter is always square.  This
only affects the CHAMFER_ACUTE_CORNERS option in inflate, which does not
appear to be used.

Lastly, we currently utilize the 64-bit integer coordinates for
calculations.  This appears to still be faster than 32-bit calculations
in Clipper1 on a modern x86 system.  This may not be the case for older
systems, particularly 32-bit systems.
2022-10-19 16:25:45 -07:00
Jon Evans 3c6e8aea0f Properties panel: post-rebase fixes and hide by default
Remove layer widget re-added by Orson's rebase
2022-08-22 21:32:33 -04:00
Seth Hillbrand 3081023b5e ADDED: Minimum copper connection width DRC check
Checks all copper connections in each net/layer for minimum width
setting.

Fixes https://gitlab.com/kicad/code/kicad/issues/9870
2022-07-11 19:26:56 +00:00
jean-pierre charras f20cb0fda8 Activate teardrops: remove advanced config option and add teardrop keywords in files. (the ability to read teardrop keywords was added some time ago) 2022-06-17 19:42:27 +02:00
Mario Luzeiro ef4f0b49fc 3D-Viewer, raytracing: implement bevel edges on item layers 2022-05-25 00:11:46 +00:00
Seth Hillbrand 3b87ab630e There is one source of truth in AC
Don't store default values in two separate places.  Passes the existing
by value as the default.

Issue identified by @axemagn

Fixes https://gitlab.com/kicad/code/kicad/issues/10221
2022-01-28 13:33:28 -08:00
jean-pierre charras 9c29cc945c prepare teardrops, round 2 2022-01-08 16:56:41 +01:00
Wayne Stambaugh cc9d074a2a Add upated UI event throttling to advanced configuration. 2021-12-28 18:17:53 -05:00
Jeff Young 533276e6b6 Copper sliver checking.
ADDED DRCE_COPPER_SLIVER DRC error.
ADDED ADVANCED_CFG DRCSliverWidthTolerance and DRCSliverAngleTolerance.

Fixes https://gitlab.com/kicad/code/kicad/issues/2183
2021-12-23 22:31:05 +00:00
Jon Evans 3cb7ca1db4 Remove manual canvas scale from GTK
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9912
2021-12-09 18:36:44 -05:00
Jon Evans 014bad7b28 Add profile counters for PCB mouse and paint events 2021-12-05 15:16:08 -05:00
Jeff Young 5863bc0937 Put Repair Schematic behind Advanced Config. 2021-11-25 12:56:46 +00:00
Marek Roszko 4377f8019d Add (optional) trace mask setting as advanced config option
Maximize laziness!
This does not affect the environment variable usage
2021-10-07 21:05:58 -04:00
Jeff Young e62969d007 Move zone fracture display mode to AdvancedCfg, and add triangulation.
Fixes https://gitlab.com/kicad/code/kicad/issues/8762
2021-07-26 18:57:35 +01:00
Jon Evans ae55db77c5 Allow hiding version from manager title bar with advanced config 2021-07-14 18:24:21 -04:00
Marek Roszko 9162013132 Add advanced cfg to force reloading memory cached 3d models 2021-07-11 00:35:38 -04:00
Marek Roszko 7cb0f8f808 Add ADVANCED_CFG to always reload cached 3d models in memory 2021-07-11 00:31:06 -04:00
Marek Roszko 79b90813ec Add ADVANCED_CFG to skip caching 3d models to file 2021-07-11 00:00:06 -04:00
Seth Hillbrand 4486cdb92e Don't use wxApp-dependent functions in headless
When running headless, e.g. from Python script, the wxApp has not be
instantiated, so we cannot use wxConfig.  In this case, we fall back to
the class defaults in ADVANCED_CONFIG()
2021-06-03 12:31:45 -07:00
Jon Evans 64d35ecebc Enable dark mode for MacOS 2021-04-28 23:24:19 -04:00
Jon Evans 7dd6a182f2 Unhide the Altium schematic importer
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8069
2021-04-08 22:22:03 -04:00
Roberto Fernandez Bautista 235688e459 Less restrictive Arc Track Dragging tool
Use the connecting straight tracks even if not exactly parallel - allow
an error margin configurable in ADVANCED_CFG (default 1 degree). Also
be less strict about end point matching and use the width of the track
as the criteria to determine suitability.

Finally, delete any short lengths of track at the end of the operation
and amend the arc end points to keep connectivity.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/7967
2021-04-06 12:52:01 +00:00
Wayne Stambaugh 6d2f80b4cf Pcbnew: add write board netlist to file support.
This is hidden behind an advanced configuration setting and is primarily
useful for developers trying to troubleshoot the netlist payload sent
from the board editor to the schematic editor.

Fixes https://gitlab.com/kicad/code/kicad/issues/8051
2021-03-28 08:38:29 -04:00
Jon Evans a9f86c6f3d Enable icon themes for Windows
Windows 10 "dark mode" is not supported and likely won't be,
but high-contrast mode and manual color theme editing is still
possible.
2021-03-14 15:39:47 -04:00
Jon Evans 03b280589e Enable dark icon theme for GTK 2021-03-13 10:54:50 -05:00
Jon Evans 405fa183b2 Add icon theme selection behind advanced config flag 2021-03-11 08:37:35 -05:00
Ian McInerney 451d7c117a Remove unused variable since this option was removed in 86aaa2e9 2021-02-26 18:46:18 +00:00
Jeff Young 86aaa2e9cb Rationalize footprint bounding boxes and cache all of them.
Fixes https://gitlab.com/kicad/code/kicad/issues/7720
2021-02-26 13:50:27 +00:00
Jon Evans 92cc88f87c Tighten up schematic label bounding boxes
Margins were being added in more places than necessary

Fixes https://gitlab.com/kicad/code/kicad/-/issues/7689
2021-02-24 17:15:35 -05:00
Jon Evans 7b64389062 Add a helper to generate action documentation 2021-02-20 13:41:49 -05:00
Zoltan Gyarmati 5676117d0b Make small drill marks size configurable via advanced config for both printing and plotting
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1972
2021-01-05 22:37:34 +00:00
Jeff Young a207bd97bb Naming conventions. 2020-11-17 16:05:49 +00:00
Jeff Young 69c1171320 Add PDFWriter debug mode (ie: uncompressed output).
Fixes https://gitlab.com/kicad/code/kicad/issues/5593
2020-11-06 10:56:45 +00:00
Jeff Young cec9081b39 Drop fudge factors to 0.1um.
We believe that our recent fixes to Clipper will allow this.  If not,
they may need to be bumped back up to 0.5um.
2020-11-04 18:32:27 +00:00
Marek Roszko c027398df3 common.h not needed in advanced_config.cpp 2020-10-23 21:49:41 -04:00
Marek Roszko 9e115a548e Add advance config variable to skip bounding box loading on footprints 2020-10-03 22:01:42 +00:00
Jeff Young 7d3eee8cf9 Move DebugZoneFiller to advanced config.
This will hopefully keep it from accidentally getting checked in
again.
2020-09-23 10:52:44 +01:00
Jeff Young f347118ce3 Add a min pin width advanced config for plotting.
Fixes https://gitlab.com/kicad/code/kicad/issues/5546
2020-09-08 20:19:54 +01:00
Jeff Young d1006138fd ADDED holeWallPlatingThickness to AdvancedCfg.
Used for zone filling and DRC hole collision testing.  Allows us to
calculate the actual hole size from the finish hole size.

Fixes https://gitlab.com/kicad/code/kicad/issues/5468
2020-09-03 16:00:07 +01:00
Jeff Young 38e9217d54 Consolidate all DRC epsilon/threshold values to a single advancedCfg setting.
Fixes https://gitlab.com/kicad/code/kicad/issues/5464
2020-09-03 15:03:09 +01:00
Jeff Young 6d12859c14 Give up on trying to get Clipper's miter strategies to work.
Instead, make sure we remove the clearance holes and outline at
the end so that copper isn't allowed to "spill" into areas it
shouldn't be in.

Also fixes a bug where the Advance Cfg defaults weren't getting
loaded when the file didn't exist.

Fixes https://gitlab.com/kicad/code/kicad/issues/3812

Fixes https://gitlab.com/kicad/code/kicad/issues/5306
2020-08-25 19:07:37 +01:00
Thomas Pointhuber a03fb7a9a8 Altium: Refactor and add initial structure for schematic importer
altium: move pcbnew/altium2kicadpcb_plugin -> pcbnew/plugins/altium

See: https://gitlab.com/kicad/code/kicad/-/issues/4412
2020-08-23 19:01:08 +00:00
Jeff Young 2b0b7a5153 Clear pin net-name-driving cache when changing annotation.
Also update connectivity after clear annotation, annotate or back
annotate.

Also update status bar for highlighted nets.

Fixes https://gitlab.com/kicad/code/kicad/issues/5170
2020-08-14 12:41:20 +01:00
Seth Hillbrand ab58b67842 Adding triangulation viewing to AC
This adds a helper routine to visualize the quality of our
triangulation.  It also renames an excessively long variable name for
the arc editor
2020-08-12 06:22:45 -07:00
Fabien Corona 133d082cc5 Pcbnew fix arc edition 2020-08-09 23:03:31 +00:00
Seth Hillbrand 0a4ce183a4 ADDED: polygon newlines every point
By default KiCad will now print each polygon point on its own line.
This adds to the vertical distance for large polygons but makes revision
control much cleaner as single point addition to a polygon does not
propagate to a diff over the full polygon.

Users/developers who want to save the files using the 4-points per line
have the ADVANCED_CONFIG setting 'CompactSave' which will provide the
original save method
2020-07-30 01:18:44 +00:00
Seth Hillbrand 6900f04ee0 Change Zone extra clearance magic number to AC
Rather than keeping a magic number in the code, we set the default in
the advanced config setting and allow users/developers to modify it.
2020-07-26 07:20:24 -07:00
jean-pierre charras c254b331f3 Pcbnew: Activate pad fabrication property in pad properties dialog.
It was previously an option of advanced config since 6 months.
It is now not optional.
2020-07-23 14:33:24 +02:00
Jon Evans 3d7610d6b9 Hide PNS debug graphics behind an AC key
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4061
2020-07-03 19:33:36 -04:00
Ian McInerney cb380cda0c Fix some build warnings 2020-04-06 00:31:45 +01:00