Needs to handle changes to PNS_ROUTER. This does not implement
springback or backspace in DIFF_PAIR_PLACER, only allows committing
lines as before
Fixes https://gitlab.com/kicad/code/kicad/issues/3988
When editing pcb items, the creation of a new net to connect existing
pads or traces can be a useful shortcut. This inserts the ability to
optionally create a new net from the Net Selector dropdown menu.
The canvas size is not guaranteed to be strictly > 0, so we need to
enforce a minimum returned size before dividing by it or passing to GAL
initialization
Replace SEVERITY_ERROR by RPT_SEVERITY_ERROR to avoid collision with a system definition.
Replace other SEVERITY_XXX by RPT_SEVERITY_XX for consistency.
Fix compil warnings and some other compil issues.
CHANGED: The reset buttons now set the X or Y offset to the current
offset from the reference position. Selecting individual pads as the reference item is now also possible.
Not all footprint pad items are connected to elements in the PNS, so if
we don't find the parent element, we avoid later crashes/assertions by
skipping their addition
Fixes#3972 | https://gitlab.com/kicad/code/kicad/issues/3972
Config values were not stored into the right variables.
Make also an option persistent during the session
in DIALOG_UPDATE_PCB and DIALOG_NETLIST
DIALOG_UPDATE_PCB and DIALOG_NETLIST match options: use same order in dialogs.
In rare cases (one known case) sizes of areas used as container when spreading
footprints can become negative, thus hanging pcbnew.
Happens if many footprints are very big (say 80cm).
Now if there is no room to place footprints, some are stacked.
In the case where the footprint arc has a non-normal angle, we cannot
represent this in pcbnew and it corrupts the gerber output. Therefore
we drop the invalid arc and continue to load the footprint/board.
Fixes#3918 | https://gitlab.com/kicad/code/kicad/issues/3918
KiCad is limited to 32 signal layers but PCad can number the layers
higher than this. Instead of a C-style array, we now hold the layer
numbers in a std::map to support arbitrary numbering.
Fixes#3949 | https://gitlab.com/kicad/code/kicad/issues/3949
Commit d7272b7f5e fixed the use of
the eagle DRC to change the library pad shapes. This was also
applied incorrectly to SMD stacks.
Remove the references to m_rules in packageSMD() and the code
that deals with them. eagle 7.7 does not have any SMD pad options
other than rectangle with rounding.
When drawing to a scaled DC, the window doesn't reflect the expected
size if scaled after. This causes elements drawn on the edge to reflect
back into the drawing area instead of being cut off.
We can simply scale our own values to avoid this issue.
Fixes#3849 | https://gitlab.com/kicad/code/kicad/issues/3849
Keeping a pointer to the actual file history inside a special
file history menu led to many cases of use after free crashes,
so instead rework the actual file history to add the menu
items.
Fixes https://gitlab.com/kicad/code/kicad/issues/3741
This is due to the fact the PNS_TUNE_STATUS_POPUP was not hidden
before calling its destructor.
It is now fixed by setting its virtual destructor calling Hide().
TODO: see if it could be used for any class derived from STATUS_POPUP.
(We already have this issue in other places)
CHANGED: Settings are now stored in versioned sub-directories
ADDED: First-run dialog for migrating settings from a previous version
CHANGED: Settings are now stored as JSON files instead of wxConfig-style INI files
CHANGED: Color settings are now all stored in a separate settings file
CHANGED: The symbol editor and footprint editor now have their own settings files
CHANGED: Color settings are no longer exposed through BOARD object
CHANGED: Page layout editor now uses Eeschema's color scheme
Settings are now managed through a central SETTINGS_MANAGER held by PGM_BASE.
Existing settings will be migrated from the wxConfig format on first run of each application.
Per-application settings are now stored in one class for each application.
to calculate thermal clearance (antipad size) for pads having the same netcode
as the zone, the net clearance has no meaning
(net clearance between object of the same net is 0)
and the zone_clearance can be set to 0 (i.e. use the netclass clearance).
Therefore use the antipad clearance (thermal clearance) or the zone_clearance if bigger.
Using a UTF8 char inside a C string can work on unix, but not on Windows.
It must be explicitly converted in a unicode value inside a wide string
(like a wxString)
When adding a .pretty library, if the actual .pretty folder were
selected then no folder would be added to the list of libraries.
This led to an assert when normalizing paths, and the library
not being added.
This variable is empty, so the argument evaluated to "-I", and the next
argument was then interpreted as a path (and thus ignored). This hides a
preprocessor definition (-D) from Swig.
Now that the tool framework gracefully shutdowns the tools, graphics
can be created on the stack inside a tool function.
This reverts commit f6881ce3de.
Increase the coverage ratio a bit so that footprints that still
have 10% of their area available for selection won't bring up the
disambiguation menu.
Fixes https://gitlab.com/kicad/code/kicad/issues/3721
The preferred list isn't actually in use anymore at this point, so
it currently has no effect other than to mess things up since we
aren't keeping track of which modules have been rejected when we
check the module count.
Fixes https://gitlab.com/kicad/code/kicad/issues/3721
Sometimes a dxf curve is a "degenerated" bezier curve having only 3 points.
(a control point is at same location as a end point)
This commit fix incorrect import of these curves.
An instance of STATUS_TEXT_POPUP was created on the stack.
But it crashes pcbnew when closing the current main frame,
perhaps due to stack switching in coroutines.
It is now created on the heap.
ADDED: Back annotation algorithm,
eeschema back annotation dialog
CHANGED: added some minor helper methods to SCH_REFERENCE_LIST and SCH_REFERENCE,
split SCH_REFERENCE_LIST::CheckAnnotation on 2 parts to reuse code
- Fix non optimal shape of solid polygons after inflate transform.
- Add a small extra clearance ((2 microns) when creating clearance areas
(especially, convert arc to polygons create small differences)
- Add a small threshold (1 micron) in drc test distances to avoid false positives
- fix a minor issue in TransformOvalToPolygon that created sometimes a not perfect shape
Fixes#3812https://gitlab.com/kicad/code/kicad/issues/3812
The new line collision search uses BBox() to check for colliding
objects. BBox in the SHAPE_LINE_CHAIN did not include width as the
chains were assumed to be zero-width. This is not the case for
PNS::LINE elements.
We mostly don't notice this because DRC checks for SEGMENT collisions
but it becomes obvious/annoying when we cannot place a track for unknown
reasons and the snap-back doesn't take line width into account.
Fixes#3776 | https://gitlab.com/kicad/code/kicad/issues/3776
When routing where we hit multiple obstacles, we choose the shortest
path to allow overlapping hits to choose the shorter path, thus giving a
better chance of returning true for the DRC-compliant path.
Fixes#3773 | https://gitlab.com/kicad/code/kicad/issues/3773
Remove the CACHE_WRAPPER whose sole purpose was to allow the
cache to be stored in the project, and instead just have the cache
inherit the proper class.
This also removes vector cover types which do nothing except obfuscate
the underlying implementation.
Mainly changes SCH_SHEET_PINS and CONFIG_PARAM_ARRAY (which will soon
be replaced by Jon's new stuff).
The unique_ptr was useful when the original function took multiple paths
which could de-scope the pointer. Current use allowed potential
use-after-free. This is now re-written to pass pointer directly.
It served us (mostly) well for more than a decade. It helped KiCad grow
before the std:: came into decent shape or speed. It was a good little
list.
RIP DLIST 2008-2020
The old methods were very clunky and not recommended (and didn't
properly cast the function types). This changes to useing the
recommended way of declaring events and casting the event handlers.
std:: defines cross-container comparison as invalid and is not
guaranteed to work. This breaks the comparison out into separate
steps, each for the separate containers.
* Split up the thirdparty code into the thirdparty folder (#3637)
* Create a new kimath static library containing all the math functions
This is part of cleaning the build system for #1906.
Property is a pad info used mainly for fabrication or test.
Currently, supported properties are:
BGA property (variant of SMD pad)
Fiducial (global to the board or local to the footprint)
Test Point
Heat sink
Castellated.
And are used in Gerber files (copper layers and drill files)
Increment BOARD_FILE_VERSION to 20200104
Create an IsContentModified() function in each frame
that provides if the content has been modified, and
use that instead of always copying the checks.
This is the first step to allowing non-segments in the line chain.
External routines cannot be allowed to change the line chain without
going through the internal routines. To accomplish this, we remove the
Vertex() and Point() access routines and only leave the const versions.
Transformations are given for both points as well as the chain itself.
It happens on Windows, and wxWidgets 3.1.3.
It is created by PNS_TUNE_STATUS_POPUP instance used in tool.
I am pretty sure this crash is created by the stack switching
when managing events, due to some changes in wxWidgets code.
the fix creates the instance on the heap, instead of on the stack.
This is not the first time I see this kind of issue.
Previously, if a SMD pad was round, itb was seen as BGA pad.
But this is not always true. so use always SMD PAD attribute,
until an explicit BGA pad attribute is added in Pcbnew
This was re-introduced by 5d3e6e3d44
The crash happened b/c we have to manage list containers in each element
and minor adjustments cause the rest of the list to be lost. This
commit re-implements it using std::iterators and deque
Fixes#2623 | https://gitlab.com/kicad/code/kicad/issues/2623
The IFACE for kicad refers to the board hidden state, not the
temporarily hidden state used by the router. We allow snapping to items
that have been removed by the temporary router state to provide snapping
to original track location.
Fixes#1827 | https://gitlab.com/kicad/code/kicad/issues/1827
(cherry picked from commit 1e64524afb)
Ratsnest did not need a reserve and then iterative emplace. Instead, we
use resize(). Stroke font gets private vars initialized and kiway
variables that are only used in debug builds are properly scoped for
releases as well
This update replaces the existing uses of unique pointer creation with
the C++14 std::make_unique call that provides proper memory release in
event of an exception.
pad size is sometimes smaller than the zone minimal width.
So, to avoid strange and incorrect results, do not create the stubs in
thermal relief when the pad size is smaller than the zone minimal width.
Happens when right clicking on an item in displayed lists.
The crash was due to a bug in wxWidgets, and the fix is only a workaround
Also remove duplicate code.
-Add a "wrap" option->Search results implemented as a nested list.
-Allow to go back with a "Find previous" button
-Remove the marker search option
-Fix a DLIST issue
-Add a result counter ("eg: hit(s): 1/3")
-Search history limited to 10
-Fix the search history order
-User can include or exclude references/values/texts from results
Fixes: lp:1845460
* https://bugs.launchpad.net/kicad/+bug/1845460
* Make the grid display settings separate from the board object
* Ensure that the grid is initialized on creation in all the frames
Fixes: lp:1843169
* https://bugs.launchpad.net/kicad/+bug/1843169
Mainly because it creates a new keyword a new keyword in *.kicad_pcb files,
and needs some tests, this is currently a advanced feature.
Enable it by adding "UsePinFunction=1" in "kicad_advanced" config file.
Note also "UsePinFunction=1" only enable saving this info in *.kicad_pcb
and kicad_mod files.
The pin name defined in Eeschema is now available as pad info.
Useful for the board designer (the pin function is displayed in the message panel).
Needed for the Gerber P&P files.
The aperture option created a Connector pad only on the paste layer.
This is incorrect: the SMD type only is acceptable.
5connector is *only* for edge card connectors.
Moreover, The dialog did not even accept the setting defined by this dialog...
- Previously a warning was generated even for not connectable pads
(pads not on copper layers or without pad name).
- The test is now optional and is disabled by default.
(pads without corresponding pin is schematics are a frequent case)
Fixes: lp:1852444
https://bugs.launchpad.net/kicad/+bug/1852444
This change makes it so that we don't run the event loop inside
the commit. It's not clear this is an issue, but it seems safer
not to.
Fixes: lp:1852589
* https://bugs.launchpad.net/kicad/+bug/1852589
Not able to draw a keepout-area on bottom or internal layers.
This was due to a behavior specific to the footprint editor,
not disabled in board editor.
Fixes: lp:1852847
https://bugs.launchpad.net/kicad/+bug/1852847
Remove not used files:
- markdown2html is not used (we are using "Sundown" tool)
- newstroke_font_without_CJK.cpp is removed.
Due to code optimization the full font works fine without memory issues
-fix also a few very minor compil warnings
In high contrast mode, the holes of buried vias and microvias were no darkened when not on the active layer.
In high contrast mode, the outer circle of buried vias and microvias were alway darkened.
In high contrast mode, when the selected layer is non visible through-vias are now darkend.
Fixes: lp:1844982
* https://bugs.launchpad.net/kicad/+bug/1844982
NEW: Add drill holes table to board statistics as a separate tab in the board
statistics dialog. Print the drill holes table in the generated statistics file.
NEW: Make the generated statistics file Markdown compatible.
For custom pad shapes were were calculating cardinal points off
of the bounding box. However, the bounding box must be rotated
around the pad's position, rather than its shapePos -- which is
an issue since any thermal spokes will be rotated around the
shapePos.
Of course we don't really need to sort that out because we're
doing an intersection of the pad's boundary polygon with a vector
from the shapePos out to the cardianl point -- so we really just
need the cardinal point to be "out there". So I've changed it
to use use INT_MAX / 2.
Fixes: lp:1851703
* https://bugs.launchpad.net/kicad/+bug/1851703
Mainly replacing std::string by wxString to manage filenames.
On Windows, a sdt::string cannot manage a filename, unless using
in many places TO_UTF8 and FROM_UTF8.
So the best way is to use a wxString for filenames and error messages.
Due do latest changes, a local copy of m_DisplayOptions was used instead of m_DisplayOptions itself.
But saving config use references to save params, so a non existing reference was used.
The pointer passing for display options is deprecated. This removes the
excess casting as the EDA_FRAME didn't need the base call with no value.
All requests for display options are now returned const and are updated
with a Set() routine after modification.
In Gerbview, this resolves an issue where the display options were not
stored because it was receiving the NULL from EDA_FRAME.
3 layers shown (but not selectable) in layer manager are removed from layer box
(inner_layers is a pseudo layer, Edge_Cuts and Margin are not yet managed in Fp)
Also use "AssemblyDrawing" attribute for fabrication layers in Pcbnew (actually assembly layers)
This is due some changes in recent Gerber file format.
We want to avoid selecting items that are disabled in the item list.
Our standard method is in the GetViewLOD() that performs both size and
visibility. This extends the check to module text and via.
Fixes: lp:1851133
* https://bugs.launchpad.net/kicad/+bug/1851133
Default out-of-the-box is no hotkey. Removed all the preference stuff.
Note that the new implementation is a little different: the old one only
operated on a selection with a single item where the new one operates on
all selected items. So if you want the whole track do a 'U' before the 'W'
(or whatever you have Change Track Width assigned to).
Fixes: lp:1844023
* https://bugs.launchpad.net/kicad/+bug/1844023
The python footprint wizard can modify other parameters than the one that was changed by user.
So the parameter grid list must be updated after every parameter change.
Fixes: lp:1846404
https://bugs.launchpad.net/kicad/+bug/1846404
In Python3, all division operators promote integers to floats. We need
to downcast back to integer for the polygon vertices.
There was also an unhandled overflow in the QR generation that allowed
more than 512 bits to be loaded. This overflows the type of QR we
generate, so this truncates the input string to 62 bytes ( leaving 12
bits for the checksum )
Fixes: lp:1850223
* https://bugs.launchpad.net/kicad/+bug/1850223
This adjusts the fix for 1813038 to focus on the duplicate ghost,
preventing the need to unselect/reselect in every cycle. This improves
large move speeds substantially
This adds the pad to die parameter from each pad to the total line
length of the tuned line for comparison with desired.
Fixes: lp:1711541
* https://bugs.launchpad.net/kicad/+bug/1711541
Right click is a pointing operation combined with a request for the
context menu. We need to highlight the user's intended object when they
have moved their mouse to a new element instead of showing the context
menu for the selected object.
However, in cases where the selection is difficult to make, it is
sometimes helpful to select the item first, then right-click. In these
cases, we keep the selection where the mouse remains inside the selected
object's bounding box.
We have forbidden lists maintained in 3 separate locations. This causes
a bit of confusion as to which is correct.
This makes the list uniform but remains to place the character set in a
single location.
The previous fix for optimizer breakout length calculation was providing
better scores to longer traces rather than longer breakouts as intended.
This limits the length scoring to breakout only.
The oval clearance adds an edge on the 0-length side of a circular oval.
This is not needed and can affect the fill algorithm. Instead, we treat
round ovals as circles for pad polygons
Fixes: lp:1849846
* https://bugs.launchpad.net/kicad/+bug/1849846
(cherry picked from commit 57f0f88552)
The constrained draw was constraining the polygon size to fit the
existing points rather than extending the existing points to fit the
user's intent.
This adds a 90° double-joint for the completion polygon that allows the
user to complete common constrained polygons visually based on the
preview with a double-click to finish.
BLOCK elements in DXF are re-usable bits that are useful when editing
the file but should not be shown when importing the model. This skips
all references except those that exist in the default "*Model_Space".
This block is required in each DXF file and cannot be renamed.
Fixes: lp:1790821
* https://bugs.launchpad.net/kicad/+bug/1790821
Seth Hillbrand
Jeff Young
jean-pierre charras
Michael Kavanagh
Andrew Downing
Jon Evans
Simon Richter
Tomasz Wlostowski
Ian McInerney
Hufo
Ben Dooks
Alexander Shuklin
Mark Roszko
qu1ck
brian piccioni
Fabien Corona
John Beard
Wayne Stambaugh
Mikołaj Wielgus
Philipp
Seth Hillbrand
Ross Schlaikjer