Commit Graph

163 Commits

Author SHA1 Message Date
Marek Roszko 10e60acf34 Clean up including of board_design_settings.h 2021-06-06 15:03:42 -04:00
Seth Hillbrand 3d4ce0796e Add Gerber plot for SHAPE_ARC and SHAPE_LINE_CHAIN 2021-06-03 17:12:56 -07:00
Marek Roszko 03cf2b517f Enum class PAD_ATTR_T
Renamed such that python stays the same
2021-05-01 10:51:54 -04:00
Marek Roszko b243c2280d enum class PAD_SHAPE_T 2021-05-01 08:22:35 -04:00
Dominik Wernberger e2aa7be4b3 Added a lot of consts and refactored a few lines 2021-03-08 12:49:48 -08:00
jean-pierre charras da005bd2a6 Pcbnew, plot files: fix very poor shape of trapezoid pads having a non null
clearance on mask or solder mask layers.
2021-02-26 10:36:04 +01:00
Jeff Young cad5198ab7 Worksheet -> (industry standard) Drawing Sheet. 2021-02-22 17:35:46 +00:00
Zoltan Gyarmati 5676117d0b Make small drill marks size configurable via advanced config for both printing and plotting
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1972
2021-01-05 22:37:34 +00:00
Jeff Young 491fc2c8f2 Save DXF plot params to file and remove some dead code.
Fixes https://gitlab.com/kicad/code/kicad/issues/6720
2021-01-03 14:22:25 +00:00
Alexis Lockwood 4bc12e7dcd Don't include plotters_specific.h where not needed
This avoids some very large rebuilds when a plotter class is changed.
2020-12-18 07:21:59 +00:00
Marek Roszko 16e3e59495 Split out arrayDim and MIRROR templates from macros.h
These were not macros
2020-11-17 20:21:04 -05:00
Jeff Young ec020dd19f First-class support for filled shapes. 2020-11-14 01:40:32 +00:00
Jeff Young bdbb68f813 MODULE -> FOOTPRINT. 2020-11-13 16:04:03 +00:00
Jeff Young fc9cf1d827 More module -> footprint. 2020-11-13 15:16:24 +00:00
Jeff Young 52a46341db More module -> footprint. 2020-11-13 15:16:24 +00:00
Jeff Young f5443de7f9 D_PAD -> PAD. 2020-11-13 15:16:24 +00:00
Jeff Young 84dd5108ba Remove some "class_" prefixes from files. 2020-11-13 15:16:23 +00:00
Jeff Young f7333ad64a Update some classnames including archaic zone names. 2020-11-12 10:31:25 +00:00
jean-pierre charras c87faad344 Python compatibility: move DXF_PLOTTER::DXF_UNITS to DXF_UNITS in pcb_plot_params.h
Fixes #6034
https://gitlab.com/kicad/code/kicad/issues/6034
2020-10-21 18:29:53 +02:00
Wayne Stambaugh 8ff51d8899 Eeschema: add schematic sheet page number.
The groundwork has now been laid for per sheet instance data.  Initially
this only supports sheet page numbers but could be expanded to include
other per sheet instance information.

ADDED: Support for user defined schematic page numbers.
2020-10-19 14:05:45 -04:00
Marek Roszko b9f1601418 Rename PLOT_MODE to OUTLINE_MODE 2020-10-15 19:33:18 -04:00
Marek Roszko eb33c33f15 Rename EDA_DRAW_MODE_T to PLOT_MODE 2020-10-15 19:30:07 -04:00
Marek Roszko 1538d737e7 Split out FILL_T to its own header to avoid spreading eda_item everywhere 2020-10-14 21:51:23 -04:00
Marek Roszko b2e9f6987d Split base_struct into eda_item and eda_rect 2020-10-13 21:24:50 -04:00
Jeff Young ef3b7052e0 Remove layer nag dialogs and just ignore non-shapes on Edge_Cuts.
Fixes https://gitlab.com/kicad/code/kicad/issues/5812
2020-10-13 20:22:31 +01:00
Jeff Young 1703729269 Require explicit decl of maxError and errorLocations.
This should reduce both performance issues and clearance issues.
2020-10-13 13:49:07 +01:00
Jeff Young 22cde88ba9 Allow chamfering/filleting of zone/board edge intersections.
Fixes https://gitlab.com/kicad/code/kicad/issues/5947
2020-10-10 23:09:43 +01:00
jean-pierre charras 213a74cbe6 Gerber, Dialog plot: add option to disable Aperture Macro use.
Some broken Gerber readers cannot handle Aperture Macros without errors
although this feature exists since the beginning of RS274X format.
2020-10-10 16:42:21 +02:00
Jeff Young d305e9c715 Line width safety for PSLIKE plotter and some cleanup. 2020-10-08 14:15:10 +01:00
Jeff Young 37906511f5 Class renaming.
DRAWSEGMENT  -> PCB_SHAPE
EDGE_MODULE  -> FP_SHAPE
TEXTE_PCB    -> PCB_TEXT
TEXTE_MODULE -> FP_TEXT
2020-10-05 11:55:33 +01:00
Jeff Young 7a4900b8dc PCB_LINE_T -> PCB_SHAPE_T and PCB_MODULE_EDGE_T -> PCB_FP_SHAPE_T
Also updated footprint text and zone types for consistencey.
2020-10-04 16:49:04 +01:00
jean-pierre charras 13304d0870 more cleanup about removing useless include 2020-10-02 13:40:00 +02:00
Seth Hillbrand bf3cb0b1d0 Standardize pad type enums 2020-09-30 08:38:35 -07:00
Jeff Young d3f8f2b81e Remove confusion between pad->IsOnLayer and pad->IsPadOnLayer 2020-09-30 11:50:51 +01:00
Jeff Young f340636f70 When knocking out higher-priority zone use fill, not outline.
Also fixes a bunch of naming issues, primarily with lowercase for
protected variables, but also some for consistency with other parts
of the code.

Also changes the zone fill radio buttons in Board Setup to be more
generic referring to legacy vs. current, and to have tooltips.

Fixes https://gitlab.com/kicad/code/kicad/issues/5583
2020-09-18 16:45:41 +01:00
Jeff Young e2bc7557cc Clean up arc/circle polygonization.
1) For a while now we've been using a calculated seg count from a given
maxError, and a correction factor to push the radius out so that all
the error is outside the arc/circle.  However, the second calculation
(which pre-dates the first) is pretty much just the inverse of the first
(and yields nothing more than maxError back). This is particularly
sub-optimal given the cost of trig functions.

2) There are a lot of old optimizations to reduce segcounts in certain
situations, someting that our error-based calculation compensates for
 anyway.  (Smaller radii need fewer segments to meet the maxError
condition.) But perhaps more importantly we now surface maxError in the
UI and we don't really want to call it "Max deviation except when it's
not".

3) We were also clamping the segCount twice: once in the calculation
routine and once in most of it's callers.  Furthermore, the caller
clamping was inconsistent (both in being done and in the clamping
value). We now clamp only in the calculation routine.

4) There's no reason to use the correction factors in the 3Dviewer;
it's just a visualization and whether the polygonization error is
inside or outside the shape isn't really material.

5) The arc-correction-disabling stuff (used for solder mask layer) was
somewhat fragile in that it depended on the caller to turn it back on
afterwards.  It's now only exposed as a RAII object which  automatically
cleans up when it goes out of scope.

6) There were also bugs in a couple of the polygonization routines where
we'd accumulate round-off error in adding up the segments and end up with
an overly long last segment (which of course would voilate the error
max). This was the cause of the linked bug and also some issues with vias
that we had fudged in the past with extra clearance.

Fixes https://gitlab.com/kicad/code/kicad/issues/5567
2020-09-11 11:23:49 +01:00
jean-pierre charras 6ab6c00f61 Plot solder mask: fix incorrect shape for rectangular pads.
It was noticeable only for pads having a large solder mask clearance.

Fixes #5570
https://gitlab.com/kicad/code/kicad/issues/5570
2020-09-10 13:22:16 +02:00
Jeff Young 393bb0fd83 Fix assert where geometry routine wasn't ready to handle layers.
This introduces layer handling to a lot of the geometry routines.
Many of them don't do much with it now, but it does help multi-layer
zones and will help when padstacks are implemented.
2020-08-12 22:20:08 +01:00
Jeff Young 463100d67f Remove a long-standing hack to keep divots out of adjacent zones.
The new algorithm unions any adjacent zones before doing the
chamfer/fillet and then subtracts the other zones back out afterwards.

Fixes https://gitlab.com/kicad/code/kicad/issues/3812
2020-08-12 22:20:08 +01:00
Seth Hillbrand 5fc6b74c89 ADDED: Remove unused pads
This option removes copper layers from pads and vias where they are not
connected to other board elements.  This allows the inner layers to be
more closely routed if the via landing pad is not needed.

Fixes https://gitlab.com/kicad/code/kicad/issues/1835
2020-08-10 03:27:26 +00:00
Jeff Young d85a707385 Move rest of DRC to SHAPE collision architecture. 2020-07-06 20:00:50 +01:00
Jeff Young 7b042f4a75 Add rectangle tool to PCBNew toolbar in favour of Aux Origin.
ADDED new rectangle graphics tool for PCBNew and Footprint Editor.

Also adds rectangle tool to both Footprint Editor and PCBNew Place
menus.

The Aux Origin tool can come back once we have multi-select toobar
buttons.

Also collapses an unnecessary level out of the auxOrigin and gridOrigin
settings.

Fixes https://gitlab.com/kicad/code/kicad/issues/2246
2020-07-01 13:31:30 +01:00
Jon Evans 44f3cdb31e Fix a few issues with zone islands 2020-06-29 12:16:37 -04:00
Jon Evans 1d5e4f86af ADDED: Copper zone island removal is now configurable
ADDED: Zones and keepouts can now be named (for DRC)

Fixes https://gitlab.com/kicad/code/kicad/-/issues/4392
2020-06-28 09:09:38 -04:00
Jon Evans 0d4ee39f75 CHANGED: Copper zones can be on more than one layer
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1963
2020-06-28 08:52:37 -04:00
Jeff Young d01b29ab37 Cleanup pad geometry handling.
There were a lot of plotters, exporters, etc. that were rolling their
own implementations.

This also introduces a lazily-built set of SHAPE objects for doing
collision detection and some forms of rendering (and later DRC).
2020-06-22 22:28:37 +01:00
jean-pierre charras 64231a8491 fix a minor wxWidgets alert and a outdated comment. 2020-06-09 14:12:38 +02:00
Jon Evans 39a2416c11 Only sketch pads on fab layers if they exist on that side
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4546
2020-05-26 21:17:39 -04:00
Jeff Young cec857c0f4 Complete hookup of zone filler to new clearance engine. 2020-05-18 19:20:46 +01:00
Jeff Young 10614a9ebc Implement changes for Sketch Pads to Fab Layers.
Includes adding Fab Layers to default text & graphic settings.

Fixes https://gitlab.com/kicad/code/kicad/issues/1885

Fixes https://gitlab.com/kicad/code/kicad/issues/2274
2020-05-01 18:49:42 +01:00