Also fixes a bug where the auto-start-wire stuff was messing up the seleciton
when the selection tool wasn't at the top of the tool stack.
Fixes https://gitlab.com/kicad/code/kicad/issues/5960
CHANGED: The button in the left toolbar for hiding/showing hidden
pins, and the button for forcing/relaxing H&V only wire mode had
no tooltips. This MR adds them.
Previously disambiguation was looking for exact matches,
but vector buses are permitted to have different ranges and
still participate in merging, so they need to be disambiguated.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5925
This will always show 1 unit from each system, with the primary unit
being the current frame unit and the secondary unit being the
most recent unit used from the other system. These are saved in
the settings, so they are saved between runs.
Switch Eeschema to use the built-in printing routines
because its precisions are close to those and it is
cleaner.
Give mils a precision of 2 decimal places to match
the precision shown in inches.
Using CopyFile() that can collide with a windows header create hard to
understand errors, including link errors.
Renaming this function avoids these strange errors.
CHANGED: When doing cross-probe zooming, KiCad zooms the selected
component to fill the screen. This makes it hard to understand the
part in context so users would have to always zoom out manually. This
commit uses the default text height in Eeschema and Pcbnew as a
constant to compare the height of selected parts or components against.
This lets the code determine how big the part is and scale the zoom
wider accordingly. Big parts get less scaling and small part get more.
NOTE: There is a little bit of debug code present. There are #ifdefs
to let developers easily swap in the original KiCad zoom for comparison.
There is also a bool added that can force each program to always perform
the new calculated zoom since KiCad ignores zooms that are close to the
current value. This debug code can be removed later as desired.
CHANGED: Remove wire and bus formatting GUI elements from "Schematic
Setup" dialog panel. Wire thickness is handled by netclasses now
and this was a leftover from before that change.
Fixes https://gitlab.com/kicad/code/kicad/issues/5815
CHANGED: If you start the interactive delete tool and the mouse pointer
isn't near anything, Eeschema tries to use a null EDA_ITEM pointer
which throws an exception. This commit checks if the pointer is null
and exits if it is.
in most of files, including wx.h is not necessary, when only 2 or 3 wx files must be included.
Moreover, on windows, including wx.h sometimes create compil warnings about
shadowed vars defined in some specific windows headers.
CHANGED: When the "Show Details" button on the "Project Load Warning"
dialog is clicked, it reveals text that has odd formatting of when
lines split. This commit fixes the text for the dialogs that warn
that schematics will be saved in the new file format, and that Symbol
Libraries defined in the project file symbol library list are no longer
supported.
Fix compile error
Fix string format to use %ld instead to work on clang in CADSTAR Archive importers
Add virtual destructor to CONNECTION in CADSTAR_ARCHIVE_PARSER
Fixed missing tokens that weren't parsed before:
- Danglers (in NET_SCH)
- Pin numbers (in SYMBOL)
- HidePinNames in both PART and PART::DEFINITION, defaulting it to false
plotter.h contains now only a header common to all plotters.
The code does not actually change, but it allows modifying a specific plotter
without recompiling most of kicad files.
CHANGED: GetDocumentExtents() in 'eda_draw_frame.h' now has a bool
parameter "aIncludeAllVisible" with a default value "true" which makes
it behave as it did before adding parameter. If "aIncludeAllVisible"
is false, the returned bbox ignores some items depending on which
program it is running in.
CHANGED: Made "Zoom to Objects" use only PCB edge in Pcbnew. This
allows text, notes, etc outside the PCB edge to be excluded in the
zoom calculation.
CHANGED: Added "Zoom to Objects" to Pcbnew main menu, and to RMB context
menus for Eeschema and Pcbnew.
Fixes https://gitlab.com/kicad/code/kicad/issues/5787
CHANGED: SCH_VIEW::GetItemsExtents() returns a bbox of all visible items
but ignores the page and border. It was taking invisible strings into
account when calculating the bbox, and now it doesn't. Makes "Fit to
Objects" work correctly with all components that have hidden text.
Fixes https://gitlab.com/kicad/code/kicad/issues/5726
CHANGED: Pin position is now incremented properly in the Pin Table
dialog. The Pin position is ussing Internal Units insted of mils, so
the hardcoded 50/100 mils spacing has to be converted to IU before
adding.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5730
ADDED: Make middle mouse button double click do a 'Zoom to Fit'
in Eeschema, Pcbnew, and Gerbview. Ctrl-MMB does a 'Zoom to Objects'
in Eeschema.
Fixes https://gitlab.com/kicad/code/kicad/issues/1988
Also improves the SNR and consistency of the menu item text. For
instance, a position is rarely useful, while relative sizes can be.
Also removes some unnecessary repitition, such as "Graphic Rectangle"
when "Rectangle" communicates the necessary information.
CHANGED: When moving a footprint, Eeschema was always warping the mouse
when moving an item regardless of the state of the "Warp mouse to
origin of moved object" checkbox. This MR now honors the state of the
checkbox when moving schematic items.
NOTE: Issue 5279 originally only mentioned Pcbnew, but after the fix
for Pcbnew was submitted, a user pointed out it also happened in
Eeschema. Becuase of this, there are two MRs that "fix" the same issue.
Fixes https://gitlab.com/kicad/code/kicad/issues/5279
CHANGED: The margin used in 'Zoom to Fit' is now 2% instead of 10%.
ADDED: Added 'Zoom to Objects' to Eeschema which does not include
the page and border in the bbox calculations.
CHANGED: Removed pre-existing code that tweaked the center to account
for the scrollbars. It actually made the view off center. Removing it
results in perfectly centered zooms.
Fixes https://gitlab.com/kicad/code/kicad/issues/5145
The snap range needs tuning to preference and monitor resolution. This
shifts the default range down for users until the customization bits are
implemented.
This separates the two options (drag/move) into different actions. Drag
will drag all graphical lines connected. Move will disconnect the
graphical lines when moving.
You can now enable and disable snap to grid when drawing/editing across
all apps. You can also tie snap to grid to the visibility of the grid
to allow rapid enable/disable via grid display.
1) use SCH_COMPONENT::GetRef(), GetValue() and GetFootprint() when
instance-specific info is needed
2) update UpdateAllScreenReferences() to handle value and footprint.
3) BACKANNO is CvPcb's handler, not back annotation's handler. Which
means it needs GUI behaviour, not back annotation behaviour.
Fixes https://gitlab.com/kicad/code/kicad/issues/5520
There was a regression in v6 where the zoom to selection toolbar
item wasn't canceling the tool when pressed and the tool was active
(it was in v5). This implements a more generic framework for canceling
tools on button presses.
Fixes https://gitlab.com/kicad/code/kicad/issues/5103
Also fixes a couple of bugs where resolving a textVar reference
to the refDes or unit wouldn't get the correct value in a
hierarchical schematic. (Unlogged.)
Fixes https://gitlab.com/kicad/code/kicad/issues/5397
Using wxFileName::GetPath( wxPATH_WITH_SEPARATOR ) does not include the
drive specifier (A:, B:, C:, etc.) on windows which fails the comparison
with the project path 100% of the time. wxFileName::GetPathWithSep()
solves the issue nicely.
Fixes https://gitlab.com/kicad/code/kicad/issues/5077
Eeschema was the only application showing the file path. This is of
limited use and prevented other information from showing in the
shortened menubar display. Also combined strings for better translation
GitLab issue #5068 only affected the 5.1 branch. The same issue could
also affect master if for some reason a context switch occurs due to
changes. Moving the auto save feature before setting the current screen
to null should mitigate any potential future issues.
A subsheet may have more than one instance of a hier label,
but it's generally a mistake if there is no matching hier label
for a port on the parent sheet.
This is harder to do today now that we don't have manual tool
for placing hier ports, but it's still possible if you place
ports but then rename the label on the subsheet.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/3468
Display warning infobar in the board/schematic setup when no project
is loaded, since most of the settings in those dialogs are saved in
the project and not in the board/schematic file.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4868
Short net names are not unique; full names with paths must be used.
Added a grid cell renderer that does the escaping, to make it easier
to display net names in grid cells.
Once you unescape a net name, you can't go back to the escaped form
because you can't assume which `/` should be {slash} and which `/`
Because of this, we cannot use Unescape/Escape on the data model in
the netclass setup panel, and instead do the Unescape in the view.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5331
* Make the app progress indicator only have the indeterminate state
when the taskbar indicator is used (causes an uused variable warning
on wx<3.1)
* Remove unused dry run variable in pcb_netlist.h
* Remove unused forceDropAnnotations from the paste special dialog
since the dialog only controls keeping them.
CHANGED: When the output path is set in the plotter dialog, the user is
asked if they want to make the path relative to the project. The old
code would ask the user if they wanted to do this, and then if it
failed would present an error dialog. The new code tries it first on
a copy, and only if it works does the user get asked if they want
to do it.
Related to issue https://gitlab.com/kicad/code/kicad/issues/5263 except
that is for Pcbnew, and this fixes the same problem in Eeschema. Issue
5263 is fixed with Merge Request:
https://gitlab.com/kicad/code/kicad/-/merge_requests/370
This may affect other EDA_DRAW_FRAME objects as well but it doesn't seem
to be as noticeable in the symbol, footprint, and worksheet editors.
Fixes https://gitlab.com/kicad/code/kicad/issues/5248
When running the cleanup routine, we should check that we haven't
changed our lines during the process. If we have, we run again to pick
up the new merges
Fixes https://gitlab.com/kicad/code/kicad/issues/5265
Adding a component in eeschema accesses the footprint table as well as
the symbol table. There are no safe edits that can be taken while this
window is open, so we force it to be Modal instead of QuasiModal
The issue is addressed but reveals additional possible problems that
this commit fixes
Fixes https://gitlab.com/kicad/code/kicad/issues/5206
The use of printf, wxLogDebug, and std::err/std::out causes excessive
debugging output which makes finding specific debugging messages more
difficult than it needs to be.
There is still some debugging output in test code that really needs to
be moved into a unit test.
Add debugging output section to the coding policy regarding debugging
output.
* Frames moved: cvpcb, cvpcb footprints frame, gerbview, pagelayout editor
This also introduces new EDITOR_CONDITIONS that are used to set the
conditions of very common editor settings.
Also, some IDs were converted to tools in the pagelayout editor.
This allows for the tool framework to keep track of a universal
set of conditions for the UI state (enabled/checked/shown) for
controls of actions. It removes the need for the main menubar
menus to be CONDITIONAL_MENUs and be rebuilt on each open,
and instead makes the updates of the check and enabling of
items handled in the native wxWidgets way.
This commit switchs the 3d viewer and kicad project manager window
over to this system.
EDA_ITEM is a child of VIEW_ITEM, so a static_cast is not appropriate,
since in some cases it could be called with a non-EDA_ITEM argument.
This was triggering an ASAN heap-buffer-overflow in GerbView.
Cross-probing from Pcbnew to Eeschema revealed that EEschema was
including all fields, visible or not, when calculating the bounding
box of the probed componentt. This caused problems with long strings
such as URLs that were not set as visible. The cross-probing code
tries to minimize 'Zoom to Fit' operations when it's not necessary,
and the overly large bbox values often resulted in zooms not being
performed and components displayed very small.
This code adds a version of 'GetBoundingBox' that takes a boolean
to tell it to include invisble fields or not.
Addresses issue: https://gitlab.com/kicad/code/kicad/-/issues/5149
The parent symbol needs to be the same pointer as the symbol that is
saved to the cache otherwise the derived symbol will have it's parent
set to a parent that is not in the cache so it will not be saved.
Signed-off-by: Kevin Lannen <kevin.lannen@gmail.com>
The symbol editor did not actually update the parent symbol when the
dropdown in the properties editor was changed. This fixes that defect.
Signed-off-by: Kevin Lannen <kevin.lannen@gmail.com>
Michael Kavanagh
Jeff Young
Marek Roszko
PJM
Ian McInerney
Jon Evans
Franck Jullien
Wayne Stambaugh
Seth Hillbrand
Mikolaj Wielgus
jean-pierre charras
Roberto Fernandez Bautista
Peter Montgomery
Franck Jullien
Tomasz Wlostowski
Mateusz Majchrzycki
Simon Richter
Dominik Wernberger
ferdymercury
Thomas Pointhuber
Kevin Lannen