e00219f459
STEP export: allow closing (and constructing) the wire with 1nm edges.
...
This is ok (and required) because we don't mess with BRepBuilderAPI::Precision nowadays.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/18030
(cherry picked from commit 5b1c84b5dd
2024-05-18 22:52:41 +03:00
0772739cf1
3D model export: Improve 3D layer placement calculation algorithm.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/18035
2024-05-17 18:20:24 +03:00
fd438cb8e0
VRML to XCAFDoc reader is only available in OCCT 7.7.0+
2024-05-16 22:52:19 +03:00
8fd12d8b7e
Allow reading VRML models for glTF export.
...
Note that some VRML 2.0 models fill fail until our patches are integrated into OCCT 7.9.0.
2024-05-16 21:57:48 +03:00
2179685dd2
STEP export: Use TDocStd_XLinkTool to copy model with colors instead of our DIY routine.
...
Now supports older OCCT versions.
Also puts components at a higher level in the hierarchy.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17549
2024-05-16 13:01:40 +03:00
e2294a769a
Revert "STEP export: Use TDocStd_XLinkTool to copy model with colors instead of our DIY routine."
...
This reverts commit f735c9bdc2
2024-05-15 22:55:19 +00:00
f735c9bdc2
STEP export: Use TDocStd_XLinkTool to copy model with colors instead of our DIY routine.
...
Also puts components at a higher level in the hierarchy.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17549
2024-05-16 01:33:06 +03:00
0e58f1bad4
Improve approximateLineChainWithArcs algorithm.
2024-05-14 18:07:53 +03:00
7d37cebfdf
Fix orientations of some footprint STEP models.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17631
2024-04-28 23:11:26 +03:00
c8db8d087e
Remove debug line.
2024-04-26 02:40:22 +03:00
9e673bb891
Polyfill GetOneShape from OCCT.
2024-04-26 02:36:17 +03:00
1ae9e9b676
ADDED: XAO export for SALOME / Gmsh workflows.
...
Pad surfaces are assigned as face groups.
2024-04-26 01:53:43 +03:00
da1926d723
STEP/BREP export: ensure pad surface is a separate face.
...
Useful for FEM simulation.
2024-04-25 15:34:52 +03:00
5f81e01f43
ADDED: --net-filter option to STEP/BREP export CLI.
2024-04-24 18:28:53 +03:00
3f32f0c2d8
STEP/BREP export: approximate zone polygons with arcs.
...
- Speeds up processing significantly
- STEP file size reduction to 30%
2024-04-23 19:25:23 +03:00
c68e3ceb44
ADDED: Export inner PCB copper layers to STEP / BREP / GLTF.
...
Also adds options to exclude board body and components.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16855
2024-04-22 03:39:46 +03:00
cd2925d3d7
ADDED: Fuse Shapes option for STEP/BREP/GLTF export.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17777
2024-04-19 03:43:26 +03:00
d00cda3b2f
Fix build with OCC 7.5.x
2024-04-18 18:09:42 +00:00
3da5616939
step/step_pcb_model.cpp: add missing includes.
2024-04-18 13:55:49 +02:00
55fb70ae65
STEP export: use fused shapes for pads instead of polygon approximations.
2024-04-18 13:44:14 +03:00
b50a1c967f
Report errors and warnings when using BRep cutting algorithm.
2024-04-18 13:44:14 +03:00
01fedb86e2
Fix shadowed variable.
2024-04-17 18:22:22 +03:00
d97ac47509
Try to use parallel processing in BRep cutting algorithm.
2024-04-17 18:15:17 +03:00
d98d7f9017
ADDED: Support 3D shape export in BREP format.
...
BREP doesn't support colors or label names,
but is much faster to write/read compared to STEP.
2024-04-17 17:31:10 +03:00
bf16f757ed
STEP export: disable history to speed up hole cutting.
2024-04-17 16:09:03 +03:00
822409225a
STEP export: don't fail when can't construct a wire.
...
This can happen with very small shapes.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17774
(cherry picked from commit 481c1592ae
2024-04-16 22:36:34 +00:00
800ff9ffb1
STEP export: add location info to edge add failures.
2024-03-19 23:10:37 +03:00
75037dd1d1
STEP export: handle small segments connecting two arcs better.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17499
2024-03-19 22:53:30 +03:00
63dd4aed93
Step exporter: workaround to fix issue for boards with main round outline
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17446
2024-03-19 11:19:37 +01:00
a4929f9c27
Step exporter: handle circles correctly
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17137
2024-03-02 19:09:33 +01:00
5900f6baa4
Do not call MakeShapes in AddCopperPolygonShapes when polyset is empty.
...
Ease of debugging.
(cherry picked from commit 0184dfb625
2024-02-23 22:15:17 +03:00
4a1245e85a
STEP: export copper plating for vias/pads (25 micrometers).
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16694
2024-02-02 00:29:03 +03:00
3ed196859f
STEP export: build a segment from last point for segment case as well.
...
https://gitlab.com/kicad/code/kicad/-/issues/16807
2024-01-29 19:59:41 +03:00
9345b73af5
Don't crash when OCC fails to read a model and didn't open the doc.
2023-12-06 03:16:46 +03:00
5de55b8c4a
STEP export: fix a Bnd_BoundSortBox usage bug.
2023-11-21 14:21:12 +03:00
58b9d68084
STEP export: make use of footprint names instead of "SOLID".
...
Should help when importing into software that does deduplication
based on label names (e.g. SolidWorks).
2023-11-21 14:11:16 +03:00
f3fdfa73e6
STEP export: Do not set BRepBuilderAPI precision.
...
This caused issues when loading some STEP models.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15485
2023-11-21 00:47:38 +03:00
8dfad68d69
ADDED: option to optimize exported STEP files (disable pcurves)
2023-11-19 15:23:17 +03:00
1321c8c6af
STEP export: fix an issue when cutting circular holes in zones.
2023-11-19 14:04:31 +03:00
254c8accc2
Remove some debugging messages.
2023-10-15 03:28:25 +03:00
62d959ed0e
Don't assume an error location for PAD::GetEffectivePolygon().
...
While ERROR_INSIDE was good for plotting, 3D generation, etc., it's
not good for generating router hulls.
Also reverts part of the change to always use polygons for PNS::SOLIDs. A single shape in a SHAPE_COMPOUND will be faster (and
more accurate).
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14898
2023-10-13 13:59:26 +01:00
f8dac43325
STEP export: add short segments as circles.
...
Because OCC can't connect two arcs together sometimes.
2023-08-29 23:58:25 +03:00
114ff054d3
STEP exporter: export track segments as thick segments with rounded end using arcs.
...
They are no longer exported as polygons.
Export time is slightly faster and file sizes slightly smaller.
Track arcs are still exported as polygons.
2023-08-27 19:37:41 +02:00
15f5a14217
Fix minor compil warnings
2023-08-27 11:11:08 +02:00
f842e6ac7a
STEP: export arcs in board contours as curves, not polygons.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13825
2023-08-24 21:53:53 +03:00
b8ce97b532
STEP export: fix circles.
2023-08-24 14:57:15 +03:00
83e9d87cde
STEP export: fix hole cutting counter message.
2023-08-24 14:26:27 +03:00
eb8c1d2a90
Fix compil issues (and probably a bug). Also display calculation time info.
2023-08-24 13:02:10 +02:00
cb54bdfa84
STEP export: add bounding box optimizations for cutting holes.
2023-08-24 05:42:56 +03:00
458d5fbeb8
STEP export: use unfractured polygons.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15486
2023-08-24 03:47:55 +03:00
Alex Shvartzkop
aris-kimi
jean-pierre charras
Roberto Fernandez Bautista
Jeff Young