jean-pierre charras
63002cec57
Do not add a title/comment in mandatory field strings when writting netlists.
...
This is mainly for "Sheetfile" property because current it is the only one
that has a title when plotting/drawing it.
2022-10-22 12:50:26 +02:00
Jeff Young
ce2dbdec75
Formatting and a bit of cleanup.
2022-10-21 18:41:39 +01:00
Jeff Young
d16b23d16e
Name shortening and line-break reduction.
2022-10-21 18:41:39 +01:00
Seth Hillbrand
d1bf889e71
Resolve embedded text vars
...
Title Block text variables are embedded into the pcb file and should
be used for resolving when the project file is missing
2022-10-21 08:37:37 -07:00
Alex
67985510a8
Fix selecting pads of footprints in groups.
2022-10-21 17:13:24 +03:00
Jeff Young
585fac19c6
Copy connected-only and keep-top-bottom properties.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12691
2022-10-21 00:05:11 +01:00
Jeff Young
6fd195c389
Use comma to separate diff pair nets/netclassse rather than /.
...
("/" is problematic because it's more likely to appear in netnames.)
Fixes https://gitlab.com/kicad/code/kicad/issues/12592
2022-10-21 00:05:11 +01:00
Jeff Young
3451506d25
Slight performance improvement.
2022-10-20 18:37:48 +01:00
Jeff Young
323c04af2c
Fix order-of-ops issue with calling collide before tesselating.
2022-10-20 18:37:48 +01:00
jean-pierre charras
6aa515e2f8
board_stackup_manager: fix incorrect behavior when adding a new dielectric layer.
...
Fixes #12680
https://gitlab.com/kicad/code/kicad/issues/12680
2022-10-20 11:27:35 +02:00
Jeff Young
e3842514e7
Move courtyard collision setting to preferences.
...
Also cleans up PCBNew/FPEditor edit options panel to be more in sync
with each other.
2022-10-19 11:33:11 +01:00
Jeff Young
403cc50e7c
Don't exit group when the cancel went to another tool.
...
Also fixes a bug where the group border didn't get updated immediately
on enter/exit.
Fixes https://gitlab.com/kicad/code/kicad/issues/12669
2022-10-18 17:53:06 +01:00
Jeff Young
8d40bf25d6
Need to setup outline mode stuff if it's turned on late.
2022-10-18 14:41:27 +01:00
Jeff Young
1f0fa3ef63
Fix bug in new optionally-flashed via/pad zone fill logic.
2022-10-18 14:02:47 +01:00
Jeff Young
4633d251a5
Remove single-zone-fill and unfill.
...
These are incompatible with our zone-priority-based algorithms.
2022-10-18 13:45:28 +01:00
Jeff Young
437d2c4589
Overhaul of remove-unconnected's zone filling and drawing strategies.
...
1) The highest priority zone that a via/pad collides with "owns" its
connectivity state. Once set, lower priority zones cannot change it --
and in fact, if they would have connected to it are forced not to.
2) The connectivity state goes with the zone fill state, and therefore
must be saved in the file.
3) Display of remove-unconnected's pads is no longer done in GetViewLOD()
(which isn't called for selected items), and is instead done in PCB_PAINTER.
This allows us to draw the full pad in outline mode when a via/pad is
selected which would otherwise only show the hole.
4) Note that in some cases this will still generate DRC errors -- in
particular when a via nearly collides with a higher priority zone it
won't get "owned" by that zone and may therefore have insufficient
clearance if said zone concludes it's unconnected and a subsequent
(lower priority) zone connects to it (causing it to now become flashed).
Fixes https://gitlab.com/kicad/code/kicad/issues/11299
2022-10-18 13:05:42 +01:00
Wayne Stambaugh
598b09821a
Coverity fixes.
2022-10-17 15:30:20 -04:00
Jeff Young
92f1ee556f
Don't fill drawing sheet rects with transparent fill.
...
It might make sense to do that with board and/or schematic items for
hit-testing or something, but it definitely doesn't make any sense for
the drawing sheet border.
Also, when reading in items with a transparent fill, treat them as
unfilled (otherwise we get filled with layer colour in at least PCBNew).
2022-10-17 17:51:11 +01:00
Jeff Young
413fd82813
Re-entrancy guard for router tool.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12604
2022-10-17 13:21:07 +01:00
Jeff Young
46752499df
We need both a tool-oriented delete and one that doesn't push/pop, etc.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12600
2022-10-17 13:21:07 +01:00
jean-pierre charras
f3bb34779a
TransformTextShapeWithClearanceToPolygon() add optimization for 3D viewer.
...
This function convert a text shape to a set of polygons for the 3D viewer.
Texts shapes are a bit special and can generate a lot of small overlapping polygons.
These polygons are now merged before being added to the list of polygons handled
by the 3D viewer draw functions.
Locally merging polygons is usually not efficient but in this case it can speedup
the 3D viewer (up to 10x).
Mainly noticeable for silkscreen layers when the "copper" thickness is shown
2022-10-17 07:32:30 +02:00
Jeff Young
3e53426b6c
Use same ratsnest colours in the router as the rest of KiCad.
2022-10-16 22:21:14 +01:00
Jeff Young
e9f8454a67
No DRC engine in footprint editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12658
2022-10-16 18:39:37 +01:00
Jeff Young
631980b0ab
We were saving the old board pointer, but not updating the current one.
...
This also makes a few other adjustments to order and to where we look
for the enabled layers which should make it more robust.
Fixes https://gitlab.com/kicad/code/kicad/issues/10925
2022-10-16 18:39:37 +01:00
Jeff Young
73e1676bdb
Fix const-reference property access.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12639
2022-10-15 20:22:38 +01:00
Jeff Young
d1fb32f26c
Formatting.
2022-10-15 19:09:25 +01:00
Jeff Young
4af98827fd
Revert change for 11299, and update removed-pad items after zone fills.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12645
2022-10-15 16:06:57 +01:00
Jeff Young
b012cc1ac3
Don't resolve footprint text variables in footprint editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12658
2022-10-15 16:05:22 +01:00
Jeff Young
0d7185c2ff
Fix mismatch between PCB_VIA defaults and file format defaults.
2022-10-15 11:17:58 +01:00
jean-pierre charras
a855c9a40c
Fix not handled exceptions.
2022-10-15 10:27:00 +02:00
jean-pierre charras
8098db2a20
BuildBoardPolygonOutlines: enable multiple main outlines: it works fine in 3D viewer.
2022-10-15 09:33:27 +02:00
Seth Hillbrand
697056fa7e
Correctly sort positions for default align
...
When not aligning under mouse cursor, choose the X-most element where X
is top/bottom/left/right. Previous sorting was not correct for two
directions
Fixes https://gitlab.com/kicad/code/kicad/issues/12627
2022-10-14 16:15:06 -07:00
Jeff Young
7ffdfb1067
Clear Scintilla undo history after setting initial text.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12650
2022-10-14 22:01:20 +01:00
Jeff Young
6f9bc0980b
Refactor poly outline generator to handle multiple outlines.
...
Note: disjoint outlines are handled in footprint courtyards, but not
for board outlines.
Fixes https://gitlab.com/kicad/code/kicad/issues/7660
2022-10-14 20:32:04 +01:00
Jeff Young
6357c83a8c
Debug code to try and catch Undo/SyncWorld mismatch.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12640
2022-10-14 13:25:25 +01:00
Jeff Young
07d9671126
Repair unbalanced UndoRedoBlock call.
2022-10-14 11:44:04 +01:00
Jeff Young
b01bf081d8
Cleanup.
2022-10-14 11:12:25 +01:00
Jeff Young
de5980b92e
Share more of the courtyard collision highlighting code.
2022-10-14 10:42:07 +01:00
Jeff Young
11dc5424cb
Pull interactive courtyard checker out of move tool to share with router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12594
2022-10-14 00:48:37 +01:00
Jeff Young
8f1b4a9c03
Include cleanup.
2022-10-13 23:15:41 +01:00
Jeff Young
3090363cd5
Copy via flags down to the level the router consumes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12591
2022-10-13 17:41:42 +01:00
Jeff Young
46a41e2e34
Pin 0-sized pads at 1um rather than throwing them out.
...
(See bug report for more commentary.)
Fixes https://gitlab.com/kicad/code/kicad/issues/12617
2022-10-13 14:47:50 +01:00
Jeff Young
08260661b8
Force flashing when generating SOLIDs.
...
We only have a single SOLID per pad, so the solid's shape must always
be the flashed shape and then we can do layer-specific flashing tests
internally.
Fixes https://gitlab.com/kicad/code/kicad/issues/12458
2022-10-13 13:05:51 +01:00
Jeff Young
d1450e1802
Commenting.
2022-10-13 13:05:51 +01:00
Jeff Young
8b9cbd5805
Don't reset editPad if it still exists after model reset.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12630
2022-10-13 00:07:30 +01:00
Jeff Young
efa14e501c
Cleanup.
2022-10-12 16:36:54 +01:00
jean-pierre charras
d0d625dcb5
BOARD_INSPECTION_TOOL::LocalRatsnestTool(): set a suitable cursor when activated.
2022-10-12 15:56:41 +02:00
Jeff Young
bd1114d94d
Move footprint properties dialogs to symbol properties grid resizing strategy.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9883
2022-10-12 00:38:44 +01:00
Jeff Young
e02c05d38f
Add unit and eval support to WX_GRIDs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/1871
Fixes https://gitlab.com/kicad/code/kicad/issues/4285
2022-10-11 23:40:58 +01:00
Seth Hillbrand
c9f11827a7
Don't connect disparate nets
...
Only some elements get their nets assigned based on connectivity. Other
elements should be keps in different clusters for connection
Fixes https://gitlab.com/kicad/code/kicad/issues/12622
2022-10-11 15:03:51 -07:00