27add591ec
Add Clipper2
...
Currently this lives behind the advanced config flag `UseClipper2`.
Enabling this flag will route all Clipper-based calls through the
Clipper2 library instead of the older Clipper. The changes should be
mostly transparent.
Of note, Clipper2 does not utilize the `STRICTLY_SIMPLE` flag because
clipper1 did not actually guarantee a strictly simple polygon.
Currently we ignore this flag but we may decide to run strictly-simple
operations through a second NULL union to simplify the results as much
as possible.
Additionally, the inflation options are slightly different. We cannot
choose the fallback miter. The fallback miter is always square. This
only affects the CHAMFER_ACUTE_CORNERS option in inflate, which does not
appear to be used.
Lastly, we currently utilize the 64-bit integer coordinates for
calculations. This appears to still be faster than 32-bit calculations
in Clipper1 on a modern x86 system. This may not be the case for older
systems, particularly 32-bit systems.
2022-10-19 16:25:45 -07:00
3c6e8aea0f
Properties panel: post-rebase fixes and hide by default
...
Remove layer widget re-added by Orson's rebase
2022-08-22 21:32:33 -04:00
3081023b5e
ADDED: Minimum copper connection width DRC check
...
Checks all copper connections in each net/layer for minimum width
setting.
Fixes https://gitlab.com/kicad/code/kicad/issues/9870
2022-07-11 19:26:56 +00:00
f20cb0fda8
Activate teardrops: remove advanced config option and add teardrop keywords in files. (the ability to read teardrop keywords was added some time ago)
2022-06-17 19:42:27 +02:00
ef4f0b49fc
3D-Viewer, raytracing: implement bevel edges on item layers
2022-05-25 00:11:46 +00:00
3b87ab630e
There is one source of truth in AC
...
Don't store default values in two separate places. Passes the existing
by value as the default.
Issue identified by @axemagn
Fixes https://gitlab.com/kicad/code/kicad/issues/10221
2022-01-28 13:33:28 -08:00
9c29cc945c
prepare teardrops, round 2
2022-01-08 16:56:41 +01:00
cc9d074a2a
Add upated UI event throttling to advanced configuration.
2021-12-28 18:17:53 -05:00
533276e6b6
Copper sliver checking.
...
ADDED DRCE_COPPER_SLIVER DRC error.
ADDED ADVANCED_CFG DRCSliverWidthTolerance and DRCSliverAngleTolerance.
Fixes https://gitlab.com/kicad/code/kicad/issues/2183
2021-12-23 22:31:05 +00:00
3cb7ca1db4
Remove manual canvas scale from GTK
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9912
2021-12-09 18:36:44 -05:00
014bad7b28
Add profile counters for PCB mouse and paint events
2021-12-05 15:16:08 -05:00
5863bc0937
Put Repair Schematic behind Advanced Config.
2021-11-25 12:56:46 +00:00
4377f8019d
Add (optional) trace mask setting as advanced config option
...
Maximize laziness!
This does not affect the environment variable usage
2021-10-07 21:05:58 -04:00
e62969d007
Move zone fracture display mode to AdvancedCfg, and add triangulation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8762
2021-07-26 18:57:35 +01:00
ae55db77c5
Allow hiding version from manager title bar with advanced config
2021-07-14 18:24:21 -04:00
9162013132
Add advanced cfg to force reloading memory cached 3d models
2021-07-11 00:35:38 -04:00
7cb0f8f808
Add ADVANCED_CFG to always reload cached 3d models in memory
2021-07-11 00:31:06 -04:00
79b90813ec
Add ADVANCED_CFG to skip caching 3d models to file
2021-07-11 00:00:06 -04:00
4486cdb92e
Don't use wxApp-dependent functions in headless
...
When running headless, e.g. from Python script, the wxApp has not be
instantiated, so we cannot use wxConfig. In this case, we fall back to
the class defaults in ADVANCED_CONFIG()
2021-06-03 12:31:45 -07:00
64d35ecebc
Enable dark mode for MacOS
2021-04-28 23:24:19 -04:00
7dd6a182f2
Unhide the Altium schematic importer
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8069
2021-04-08 22:22:03 -04:00
235688e459
Less restrictive Arc Track Dragging tool
...
Use the connecting straight tracks even if not exactly parallel - allow
an error margin configurable in ADVANCED_CFG (default 1 degree). Also
be less strict about end point matching and use the width of the track
as the criteria to determine suitability.
Finally, delete any short lengths of track at the end of the operation
and amend the arc end points to keep connectivity.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7967
2021-04-06 12:52:01 +00:00
6d2f80b4cf
Pcbnew: add write board netlist to file support.
...
This is hidden behind an advanced configuration setting and is primarily
useful for developers trying to troubleshoot the netlist payload sent
from the board editor to the schematic editor.
Fixes https://gitlab.com/kicad/code/kicad/issues/8051
2021-03-28 08:38:29 -04:00
a9f86c6f3d
Enable icon themes for Windows
...
Windows 10 "dark mode" is not supported and likely won't be,
but high-contrast mode and manual color theme editing is still
possible.
2021-03-14 15:39:47 -04:00
03b280589e
Enable dark icon theme for GTK
2021-03-13 10:54:50 -05:00
405fa183b2
Add icon theme selection behind advanced config flag
2021-03-11 08:37:35 -05:00
451d7c117a
Remove unused variable since this option was removed in 86aaa2e9
2021-02-26 18:46:18 +00:00
86aaa2e9cb
Rationalize footprint bounding boxes and cache all of them.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7720
2021-02-26 13:50:27 +00:00
92cc88f87c
Tighten up schematic label bounding boxes
...
Margins were being added in more places than necessary
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7689
2021-02-24 17:15:35 -05:00
7b64389062
Add a helper to generate action documentation
2021-02-20 13:41:49 -05:00
5676117d0b
Make small drill marks size configurable via advanced config for both printing and plotting
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1972
2021-01-05 22:37:34 +00:00
a207bd97bb
Naming conventions.
2020-11-17 16:05:49 +00:00
69c1171320
Add PDFWriter debug mode (ie: uncompressed output).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5593
2020-11-06 10:56:45 +00:00
cec9081b39
Drop fudge factors to 0.1um.
...
We believe that our recent fixes to Clipper will allow this. If not,
they may need to be bumped back up to 0.5um.
2020-11-04 18:32:27 +00:00
c027398df3
common.h not needed in advanced_config.cpp
2020-10-23 21:49:41 -04:00
9e115a548e
Add advance config variable to skip bounding box loading on footprints
2020-10-03 22:01:42 +00:00
7d3eee8cf9
Move DebugZoneFiller to advanced config.
...
This will hopefully keep it from accidentally getting checked in
again.
2020-09-23 10:52:44 +01:00
f347118ce3
Add a min pin width advanced config for plotting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5546
2020-09-08 20:19:54 +01:00
d1006138fd
ADDED holeWallPlatingThickness to AdvancedCfg.
...
Used for zone filling and DRC hole collision testing. Allows us to
calculate the actual hole size from the finish hole size.
Fixes https://gitlab.com/kicad/code/kicad/issues/5468
2020-09-03 16:00:07 +01:00
38e9217d54
Consolidate all DRC epsilon/threshold values to a single advancedCfg setting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5464
2020-09-03 15:03:09 +01:00
6d12859c14
Give up on trying to get Clipper's miter strategies to work.
...
Instead, make sure we remove the clearance holes and outline at
the end so that copper isn't allowed to "spill" into areas it
shouldn't be in.
Also fixes a bug where the Advance Cfg defaults weren't getting
loaded when the file didn't exist.
Fixes https://gitlab.com/kicad/code/kicad/issues/3812
Fixes https://gitlab.com/kicad/code/kicad/issues/5306
2020-08-25 19:07:37 +01:00
a03fb7a9a8
Altium: Refactor and add initial structure for schematic importer
...
altium: move pcbnew/altium2kicadpcb_plugin -> pcbnew/plugins/altium
See: https://gitlab.com/kicad/code/kicad/-/issues/4412
2020-08-23 19:01:08 +00:00
2b0b7a5153
Clear pin net-name-driving cache when changing annotation.
...
Also update connectivity after clear annotation, annotate or back
annotate.
Also update status bar for highlighted nets.
Fixes https://gitlab.com/kicad/code/kicad/issues/5170
2020-08-14 12:41:20 +01:00
ab58b67842
Adding triangulation viewing to AC
...
This adds a helper routine to visualize the quality of our
triangulation. It also renames an excessively long variable name for
the arc editor
2020-08-12 06:22:45 -07:00
133d082cc5
Pcbnew fix arc edition
2020-08-09 23:03:31 +00:00
0a4ce183a4
ADDED: polygon newlines every point
...
By default KiCad will now print each polygon point on its own line.
This adds to the vertical distance for large polygons but makes revision
control much cleaner as single point addition to a polygon does not
propagate to a diff over the full polygon.
Users/developers who want to save the files using the 4-points per line
have the ADVANCED_CONFIG setting 'CompactSave' which will provide the
original save method
2020-07-30 01:18:44 +00:00
6900f04ee0
Change Zone extra clearance magic number to AC
...
Rather than keeping a magic number in the code, we set the default in
the advanced config setting and allow users/developers to modify it.
2020-07-26 07:20:24 -07:00
c254b331f3
Pcbnew: Activate pad fabrication property in pad properties dialog.
...
It was previously an option of advanced config since 6 months.
It is now not optional.
2020-07-23 14:33:24 +02:00
3d7610d6b9
Hide PNS debug graphics behind an AC key
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4061
2020-07-03 19:33:36 -04:00
cb380cda0c
Fix some build warnings
2020-04-06 00:31:45 +01:00
Seth Hillbrand
Jon Evans
jean-pierre charras
Mario Luzeiro
Wayne Stambaugh
Jeff Young
Marek Roszko
Roberto Fernandez Bautista
Ian McInerney
Zoltan Gyarmati
Thomas Pointhuber
Fabien Corona