c5696738d2
Use diff-pair-via clearance when checking against vias.
...
Fixes: lp:1742275
* https://bugs.launchpad.net/kicad/+bug/1742275
2018-05-18 23:42:38 +01:00
149f4f68c9
Leave decorations on LAYER_GP_OVERLAY.
...
In particular, don't reset them to 0, which happens to be F_Cu.
Fixes: lp:1658775
* https://bugs.launchpad.net/kicad/+bug/1658775
2018-05-18 18:18:40 +01:00
dcf4d7caa7
router: allow placing via without track in shove mode
...
Fixes: lp:1769782
* https://bugs.launchpad.net/kicad/+bug/1769782
2018-05-08 15:18:10 +02:00
2b46bda2f2
PNS router: apply the last stable state after dragging
...
Previously, dragging changes were applied only if the last cursor move
finished with a successful drag operation. It made items squeezing
difficult, as it required accurate cursor movement to apply the changes.
2018-05-08 11:50:37 +02:00
dbc2eea3db
Optimize itemset
...
When counting items, many cases exist where we want to count all items
without checking flags. This short-circuits the loop to provide the
immediate count.
2018-05-07 13:59:12 -07:00
9648584827
Adjusting the breakout optimizer for custom pads
...
Rather than using the center of the bounding box, we keep the start
track on the custom pad's connection pad when optimizing the breakout.
2018-05-04 08:23:20 -07:00
b2c4519c2c
Setting custom pad shape to be outline for PNS
...
Changes SHAPE_CONVEX to SHAPE_SIMPLE to better reflect the limitations.
Changes SHAPE_LINE_CHAIN::PointInside calculation to allow points
strictly inside a line chain
Fixes: lp:1768862
* https://bugs.launchpad.net/kicad/+bug/1768862
2018-05-04 08:23:20 -07:00
1ac905d3ee
Allow PNS to select nearest pad when two overlap
...
Usually pads do not overlap. However custom pads are represented as
their convex hull, so they may enclose other pads. This change allows the
router to select the closest pad to the cursor position.
2018-05-03 09:48:15 -07:00
2eddf1d8db
router: prevent a very unlikely infinite loop in PNS::LINE::Walkaround() causing an OOM&segfault
...
Fixes: lp:1767587
* https://bugs.launchpad.net/kicad/+bug/1767587
2018-05-02 15:06:08 -07:00
73eab29802
Removed 2 unused variables from PNS::LINE::Walkaround()
2018-05-02 17:06:13 +02:00
12487e14ab
Reduce extra loop comparison
2018-04-30 09:14:23 -07:00
2a87117edc
Speed load/unload of complex boards
...
Corrects an error in polyline estimation
Syncs graphics to world PNS by whole layer set rather than
individual layer at a time.
Prevents reloading of full pns TOOL_BASE during reset of tools unless
the tool is being activated.
Fixes: lp:1766626
* https://bugs.launchpad.net/kicad/+bug/1766626
2018-04-28 16:11:07 +02:00
7a7da560bc
Keep unknown nets at 0 while routing.
...
Previous algorithm used a static variable which it decremented
for each new unconnected track, but this resulted in the router
marking earlier fixed segments as collisions (because they
would get set to netcode = 0 when "fixed").
Fixes: lp:1762043
* https://bugs.launchpad.net/kicad/+bug/1762043
2018-04-25 10:54:32 +01:00
45d1c19eb7
Add tooltip text to drag options.
2018-04-17 08:59:52 -07:00
900bf0c7a6
Allow connections to no-net items in Highlight Collisions mode.
...
If the track being routed is unconnected, or the end-point
clicked on is unconnected, allow the connection by changing
the unconnected item to the net of the connected one.
Fixes: lp:1548129
* https://bugs.launchpad.net/kicad/+bug/1548129
2018-04-09 11:05:14 +01:00
ca4e4aead4
router: don't push vias if push force is zero
...
Fixes: lp:1758540
* https://bugs.launchpad.net/kicad/+bug/1758540
2018-03-26 20:13:32 +02:00
d3e7efcd66
Ignore pads when selecting drag candidates in router tool.
...
Fixes: lp:1747156
* https://bugs.launchpad.net/kicad/+bug/1747156
2018-03-16 18:01:40 +00:00
3b0a758f97
Ensure router layer is visible.
...
Fixes: lp:1663556
* https://bugs.launchpad.net/kicad/+bug/1663556
2018-03-16 02:43:17 +00:00
ebd2b78f86
pcbnew/router: respect default net clearance for objects that don't have any net (e.g. board outline)
...
Fixes: lp:1753904
* https://bugs.launchpad.net/kicad/+bug/1753904
2018-03-07 11:47:37 +01:00
18167f829a
Derive KIDIALOG from wxRichMessageDialog
...
wxRichMessageDialog already offers a dialog with a checkbox, so
the custom dialog setup code is not necessary anymore.
2018-03-02 17:05:35 +01:00
1d5df8e975
Renamed KI_DIALOG to KIDIALOG
2018-03-02 11:57:03 +01:00
0d794b20bb
Add null check in ROUTER_TOOL::breakTrack()
2018-02-27 08:45:06 +01:00
31e78d670d
Ensure ROUTER_PREVIEW_ITEM draws on top of all normal layers
...
Fixes: lp:1751646
* https://bugs.launchpad.net/kicad/+bug/1751646
2018-02-26 11:31:39 +01:00
be8bb24390
Make all new hotkeys editable; label some GAL-only hotkeys
...
Fixes: lp:1751183
* https://bugs.launchpad.net/kicad/+bug/1751183
2018-02-25 17:57:36 -05:00
918ac567e5
Fix constant naming conflict in KI_DIALOG
2018-02-22 17:15:22 +01:00
fe0e44ba3d
PNS: display a message in case of keep-out zone triangulation failure
2018-02-22 16:28:09 +01:00
7129dcef91
Added STATUS_TEXT_POPUP for simple popup text display
2018-02-22 15:18:52 +01:00
9673ac4ecd
WX_STATUS_POPUP refactor
...
- Rename WX_STATUS_POPUP -> STATUS_POPUP
- Added Expire() to show a popup temporarily
- Code formatting
2018-02-22 15:18:52 +01:00
ab8e2419c2
PNS: Handle no-tracks setting in keep out zones
...
Fixes: lp:1748832
* https://bugs.launchpad.net/kicad/+bug/1748832
2018-02-19 10:25:05 +01:00
0504a6db52
Don't sync zone if polygon triangulation fails
2018-02-19 08:49:34 +01:00
cf5d93857f
PnS router: add support for circles in board outline
2018-02-18 21:00:28 +01:00
dfb98ce70b
router: use more kicad-ish arc representation
2018-02-17 18:25:20 +01:00
50c1ff67eb
router: treat negative net indices as always colliding
2018-02-17 18:25:20 +01:00
ed9a14f01d
PNS: disable autopanning in case of an error
2018-02-16 11:28:37 +01:00
93999f7af6
Change "Automatic neckdown" to "Optimize pad connections".
...
Fixes: lp:1485202
* https://bugs.launchpad.net/kicad/+bug/1485202
2018-02-15 17:02:44 +01:00
6afdf1cf87
PNS router: reset forced cursor position
...
Track dragging forces the cursor position, which is still kept when PNS
router is launched again. It is avoided by resetting the force cursor
position option before running the event loop.
2018-02-14 17:34:32 +01:00
11d8b9ff55
Fix double disambiguation menu when dragging
2018-02-14 15:34:09 +01:00
1afbfad44a
Use "..." uniformly in menus.
...
See the bug report for some wording changes and a couple of
menu restructurings that were also cleaned up.
Fixes: lp:1597827
* https://bugs.launchpad.net/kicad/+bug/1597827
2018-02-10 17:32:28 -05:00
bc7ca08f07
router: check type before static_cast-ing
2018-02-09 13:00:57 +01:00
c0b61c19b7
router: fixed use-after-free error occuring when a newly routed segment covered exactly an older one
...
Fixes: lp:1747973
* https://bugs.launchpad.net/kicad/+bug/1747973
2018-02-08 11:34:31 +01:00
271363f822
router: support for board outline
2018-02-06 09:43:56 +01:00
2faf1a1ed3
Initial support for keepout zones in the P&S router.
2018-02-06 09:43:56 +01:00
1858852f57
rename files
2018-02-02 21:57:12 +01:00
95864780e2
Fix cursor freezes in GAL
...
Launching right click context menu overrides the cursor position, so all
actions executed by the tools will be performed in the right click
position. It created an issue, as the overridden cursor settings were
saved into wrong context if there was another tool activated in the
meantime.
Current implementation saves cursor settings for all tools and restores
them once the right click context menu disappears.
Fixes: lp:1745981
* https://bugs.launchpad.net/kicad/+bug/1745981
Fixes: lp:1746507
* https://bugs.launchpad.net/kicad/+bug/1746507
2018-02-02 19:08:05 +01:00
39b4afecfa
fix code after file renaming
2018-01-31 09:24:02 +01:00
b43dc7954c
fix code after renaming files
2018-01-30 15:34:09 +01:00
8552f3fedf
fix code after renaming files
2018-01-29 22:00:44 +01:00
3f6af59cac
Avoid selection disambiguation menu when possible.
...
Some actions, such as select trivial connection, don't need the
user to choose which trace at a corner to start from -- either
one will do. Same for moving a simple trace corner.
Likewise, Edit in Footprint Editor shouldn't ask if you mean the
footprint or the pad. Obviously it's the footprint.
This change adds a CLIENT_SELECTION_FILTER which allows clients
to do tool- or action-specific filtering of the selection before
the disambiguation menu is run.
It also removes some tool- and action-specific code which was
in the selection_tool and shouldn't have been.
Fixes: lp:1708869
* https://bugs.launchpad.net/kicad/+bug/1708869
2018-01-18 09:09:25 +01:00
f5f7ba4746
Fix loop variable copy in for-range loop, use const reference instead
2018-01-09 19:18:44 -05:00
9ff66a5274
Fix unnecessary value parameter detected by clang-tidy. - Replace value parameter by const reference parameter or move-assignement in some cases
2018-01-09 18:55:51 -05:00
3168d03fe5
Fix unnecessary copy initialization detected by clang-tidy
2018-01-09 18:22:10 -05:00
44d4559f84
pcbnew: avoid segfault reported on certain OSX builds
...
Fixes: lp:1732274
* https://bugs.launchpad.net/kicad/+bug/1732274
2018-01-02 00:49:59 +01:00
f85a886ae4
Bug fix: Custom shaped pads having a not convex shape not magnetic on PnS router.
2017-12-19 11:13:28 +01:00
3c6d17026e
pcbnew: router now respects local pad clearances correctly
...
Fixes: lp:1558858
* https://bugs.launchpad.net/kicad/+bug/1558858
2017-12-18 18:51:47 +01:00
a13c89c83d
Removed old debug output
2017-12-17 18:43:43 +01:00
a287748921
Cosmetic enhancement: Add icons to track length tuner menu.
2017-12-14 14:33:20 +01:00
a63e9b863b
pcbnew: Fix multiple delete bug
...
Delete events when using GAL are handled by only one tool handler
instead of ROUTER_TOOL and EDIT_TOOL both deleting items.
Fixes: lp:1715158
* https://bugs.launchpad.net/kicad/+bug/1715158
2017-12-07 09:31:20 +01:00
69974b73db
Remove some extra semicolons
2017-11-09 19:52:18 +01:00
9932ff32ae
refactoring: wrapped boost::optional in OPT<> class for the purpose of easier transition to C++17 in the future
2017-11-03 23:59:02 +01:00
26f862a9d0
refactoring: remove PNS router dependency on PCB_EDIT_FRAME
2017-11-03 20:02:06 +01:00
81d1e17f02
refactoring: renamed pcbstruct.h to pcb_display_options.h, DISPLAY_OPTIONS->PCB_DISPLAY_OPTIONS
2017-11-03 20:02:06 +01:00
5eb56dd8b0
Coverity fixes
...
CIDs:
102571
168696
168701
168704
168706
168708
168710
168713
168716
168717
2017-11-01 10:24:26 +01:00
1e35d45948
Replace a assert by a wxASSERT to make debug more easy.
2017-10-16 20:26:37 +02:00
a43f3ab1fe
replace "BasicShape" by "Primitive" in code, a better name
2017-09-20 12:51:10 +02:00
e2d3fcec02
Add support for custom pad shape. Full support in DRC and PnS.
...
add option to use shape or convex hull as clearance area in zones.
simplify code to handle clearance area
2017-09-19 09:02:53 +02:00
20b9ed4897
router: fixed possible use-after-free condition during segment dragging
...
ratsnest: fixed occasionally disappearing airwires
2017-08-29 18:49:05 +02:00
aeac415599
router: hopefully a proper fix for the dragging issue
2017-08-22 19:33:38 +02:00
60fdc6229d
router: fixed inline dragging & settings dialogs inconsistency
2017-08-22 16:44:58 +02:00
667d32c4ab
router: fixed snapping to end items
2017-08-17 22:54:55 +02:00
90873a101b
router: update status message on meander spacing/amplitude hotkeys
...
Fixes: lp:1710266
* https://bugs.launchpad.net/kicad/+bug/1710266
2017-08-16 14:16:20 +02:00
d5bdcd3032
router: fixed no-snapping issue
2017-08-16 14:11:07 +02:00
2d9ab80b4e
Few improvements to the GAL router:
...
- missing 'break track' functionality
- 'drag 45 degree' and 'drag free angle' context menu shorcuts, both in the router tool and in the default context menu
- bugfix: length tuner tool can now be used again
Fixes: lp:1708386
* https://bugs.launchpad.net/kicad/+bug/1708386
Fixes: lp:1708402
* https://bugs.launchpad.net/kicad/+bug/1708402
2017-08-07 14:28:46 +02:00
76bd05a69b
Prevent creating too many transitions by TOOL_MANAGER
...
- added TOOL_INTERACTIVE::resetTransitions()
- made protected and moved TOOL_BASE::setTransitions() to TOOL_INTERACTIVE
- TOOL_MANAGER calls TOOL_INTERACTIVE::resetTransitions() instead of
setTransitions()
2017-07-31 15:09:19 +02:00
7b88dac4b7
Consistent track removal for PNS and selection tool
...
Fixes: lp:1705676
* https://bugs.launchpad.net/kicad/+bug/1705676
2017-07-27 16:20:19 +02:00
deeeed38a1
deleted several redundant icons in right-click menu. The objective is to get to a more uniforme right click menu look
...
Signed-off-by: Fabrizio Tappero <fabrizio.tappero@gmail.com>
2017-07-21 10:28:42 -04:00
64f00f447f
pcbnew - refactor move exactly tool (3/2)
...
* code formatting
* turned EDIT_TOOL::getAnchorPoint() to static getAnchorPoint()
* removed unnecessary include directives
2017-07-19 11:36:35 +02:00
b7f2525c5d
pcbnew - refactor move exactly tool (2/2)
...
This patch does the following:
* extracts a method to determine the anchor point of the move
* improves the logic of the anchor point determination for selections of multiple objects which do not contain footprints
2017-07-19 11:36:35 +02:00
885a4c1bc5
Avoid an infinite loop in PNS
...
Fixes: lp:1702485
* https://bugs.launchpad.net/kicad/+bug/1702485
2017-07-06 16:44:33 +02:00
e3d69b619f
Pcbnew: fix issue in dialog_fp_lib_table: when the only changes were the plugin name, changes were not taken in account.
...
Because the FP_LIB_TABLE::operator == was incorrect
2017-06-30 16:03:17 +02:00
805bfb048b
pcbnew: Configurable hotkeys for PNS
...
- routing options
- custom track/via size
- differential pair dimensions
- increase/decrease via size
2017-06-30 15:46:27 +02:00
20b4226a25
Router recognizes busses of differential pairs
...
Fixes: lp:1443330
* https://bugs.launchpad.net/kicad/+bug/1443330
2017-06-30 11:16:24 +02:00
3b16d3cffe
further DLIST/Iterators cleanup, some code formatting
2017-06-23 11:12:37 +02:00
3cba1007eb
Removed legacy connectivity/ratsnest algorithm, replaced with the new one. No legacy autorouting for the moment
2017-06-23 11:12:37 +02:00
2c21c70f46
Fix a few doxygen warnings
2017-06-22 09:09:52 +02:00
dcc803ecb1
VIEW_CONTROLS::GetMousePosition() returns the mouse position in world coordinates.
2017-06-12 16:24:52 +02:00
6ed4f9b208
Make EDA_DRAW_FRAME::SetToolID and mouse cursor shape setting working in GAL canvases, and uses same mouse cursor shapes in legacy and gal canvases.
...
Starting fixing incorrect UI behavior of Zoom to selection in Pcbnew.
2017-06-12 15:16:09 +02:00
3ec28e2acf
Refactor layer enumerations to all live in the same place
2017-03-30 16:01:48 -04:00
8f3423b803
Add Select Layer And Add Via actions to GAL router tool
...
On these actions, invoke the layer select dialog and set the via layer
pairs accordingly.
Fixes: lp:1672820
* https://bugs.launchpad.net/kicad/+bug/1672820
2017-03-28 15:13:27 +02:00
69115e4b9d
Signal via actions with flags, not event equality checking
...
This allows actions to encode both via type and other behaviours
intrisically witohut having to individually test for each action.
2017-03-28 15:13:24 +02:00
1fd503bf58
Move DIRECTION45 to common/geometry
...
This class is useful for generic geometric layout of 45-deg constrained
line chains, not only in the PNS router.
2017-03-22 15:23:09 +01:00
fe4f02f5b9
Coverity fixes
...
CIDs:
- 153097
- 157120
- 157119
- 155148
- 155146
- 153103
- 153099
- 153095
- 153087
- 153086
2017-03-11 22:20:08 +01:00
0a55d8e053
Fixed differential pair gap clearance error when gap equaled minimum clearance.
...
Fixes: lp:1533551
* https://bugs.launchpad.net/kicad/+bug/1533551
2017-03-11 20:57:59 +01:00
29eb696ef7
Fix crash when switching from dragging to routine (PNS router)
...
The attached patch fixes a bug where triggering InlineDrag while routing
is in progress will crash pcbnew. The problem is that the InlineDrag
event does not terminate performRouting. Once InlineDrag is finished
it will call StopRouting which deletes the m_placer. The Wait() in
performRouting will then return and it will crash as soon as it tries
to access the m_placer.
2017-03-07 13:56:44 +01:00
906ee77dbf
Fixed VIEW_ITEM memory leaks
2017-03-02 23:57:13 +01:00
fd4e2b042c
Refactor SELECTION, SELECTION_CONDITIONS, and context menus to common
...
SELECTION now holds EDA_ITEMs not BOARD_ITEMs so various places had to
change to casting the selected items to BOARD_ITEMs.
Fixed compilation warnings on clang (Tom)
2017-02-28 14:47:20 +01:00
d3edc4f843
Disable router menu when the tool is stopped
2017-02-24 13:32:47 +01:00
c001c6114f
Add cancel interactive tool action to GAL
...
This is used to provide menu entries that allows cancellation of
interactive drawing and routing tools without needing the keyboard.
It is provided in the drawing tools and the router tool.
The cancel event doesn't have any new functionality (e.g. track rip-up
for the PNS router - lp:1448460), this just adds it to the menu, where
it behaves the same as an Escape keypress.
2017-02-24 10:37:07 +01:00
a52250a91e
Change from EDA_COLOR_T to COLOR4D globally; arbitrary color support
...
eeschema now supports arbitrary colors for all object types, and
pcbnew does in GAL canvas. When switching from GAL to legacy canvas,
pcbnew will convert colors to the nearest legacy color.
2017-02-22 17:35:00 +01:00
4c83b0a94d
Move TOOL_ACTIONs to their corresponding tools; create COMMON_TOOLS
...
Some grid/zoom tools are left in PCBNEW_CONTROL because they currently
depend on Pcbnew-specific class members. Once refactoring is done to
make it possible to use all zoom and grid controls outside of pcbnew,
these last tools can be moved to common to match their ACTIONs.
2017-02-22 10:32:48 +01:00
167f45ca2b
Refactor COMMON_ACTIONS into a base and derived class
...
New virtual class ACTIONS is added as a member to EDA_DRAW_FRAME so
that the TOOL_DISPATCHER can have access to the appropriate derived
version of TranslateLegacyId()
2017-02-22 10:32:48 +01:00
a8eea6155a
Move bitmaps.h out of base_struct.h
...
bitmaps.h was included in nearly every file in the project due to it
being included by base_struct.h
Only about 130 files actually use the XPM definitions defined there, and
many of those already included bitmaps.h themselves, or via
menu_helpers.h. However, touching bitmaps.h would result in over 400
rebuilt files for pcbnew alone.
This commit moves the bitmap-related types like BITMAT_DEF out to a new
header, which is still included by base_struct.h, which is less
avoidable for now, it's it's used in the interface.
The icon list is still in bitmaps.h. This has the side effect that's
it's now easier to automatically generate this file.
Many classes in pcbnew and eeschema needed some functions moved
to the implementaitons from the headers too.
2017-02-21 09:50:15 -05:00
7806cb7bca
Drag tracks/vias menu entry (GAL)
2017-02-09 12:03:28 +01:00
77af6547c1
Coverity fixes (mostly initializing variables)
2017-02-01 17:31:55 +01:00
39317eac83
Display clearance for routed tracks (GAL)
2017-01-27 19:11:12 +01:00
fc122834c2
Code formatting
2017-01-27 19:08:32 +01:00
1102eb0d0d
Store menu titles in CONTEXT_MENU
...
Previously a title had to be provided when a submenu was added,
but this led to storing the same title in many places.
2017-01-23 14:52:11 +01:00
682da70a86
Fixed the issue of creating and event handling in context menus (GAL).
...
When creating a copy of CONTEXT_MENU, always a CONTEXT_MENU instance was
constructed, whereas an inherited type should be used. Solved with
CONTEXT_MENU::create() that has to be overridden in inheriting classes.
Event & update handlers are now virtual functions, instead of setting
the handlers with Set{Event,Update}Handler().
2017-01-23 11:40:59 +01:00
2de913797a
Fix a UI policy issue. Very minor cosmetic change: give same look to Zoom and Grid selection in 2 menus.
2017-01-20 11:35:24 +01:00
adb679dc46
ROUTER_TOOL_MENU: add zoom selection to this menu.
2017-01-20 08:51:12 +01:00
d51d53c6b9
CONTEXT_TRACK_WIDTH_MENU EventHandler: better filtering of received events ID.
...
This is mandatory because currently, on Windows, this handler is also called when clicking on an other menu with submenus like the grid menu.
2017-01-20 08:29:24 +01:00
ba9576b014
router: snap to clearance boundaries in Highlight Collisions mode
...
Fixes: lp:1655819
* https://bugs.launchpad.net/kicad/+bug/1655819
2017-01-19 17:47:15 +01:00
bb463ad434
pns: fix assertion fail when placing diff pairs
2017-01-18 15:55:46 +01:00
75fb04d650
TOOL_ACTIONs are handled with transitions, no handlers needed in the event loops
...
There used to be a number of TOOL_ACTIONs that had entries both in
SetTransitions() and the event loop, which seemed redundant and
troublesome.
Now it is not necessary anymore, transitions setup is enough to execute
associated actions.
2017-01-18 14:20:39 +01:00
3c61b16e7b
Code formatting
2017-01-18 13:22:40 +01:00
ee862e1db4
Fixed a hidden overloaded virtual function warning in PNS
2017-01-18 13:22:18 +01:00
3448698849
Add grid menu to routing context menu
...
This is a missing GAL feature (though grid cycling by hotkey was already
working fine).
Fixes: lp:1519973
* https://bugs.launchpad.net/kicad/+bug/1519973
2017-01-10 11:18:25 +01:00
b8b08dafd6
Code cleaning: remove pcbcommon.* which contains nothing really useful. The very few lines of code are moved to a better place.
2016-12-31 12:56:21 +01:00
c45cc1de68
Fixes: lp:1653146 (Assertion failed when trying to delete track with router tool active, in debug mode)
...
https://bugs.launchpad.net/kicad/+bug/1653146
2016-12-30 20:14:44 +01:00
dec2d6e8cc
Fix a few Coverity warnings. A bit of clean code in export_vrml.cpp.
2016-12-30 12:40:05 +01:00
89055c4425
Code formatting
2016-12-12 16:45:52 +01:00
1c1f4e9a50
Refactoring of VIEW/VIEW_ITEM classes:
...
- Remove dependency of EDA_ITEM on VIEW
- VIEW_ITEM is now a pure virtual interface
2016-12-12 16:45:52 +01:00
524dddaf70
Sync the PNS model when its changed
2016-11-28 15:51:18 +01:00
bcfc1e7a3f
fix shadowed local variables
2016-11-25 16:00:42 +01:00
7051b6d21f
Fixes: lp:1635723 (pcbnew: allows sometimes to draw tracks in non copper layers in Gal Mode)
...
https://bugs.launchpad.net/kicad/+bug/1635723
2016-11-13 19:02:44 +01:00
4d180efa5f
router: correct handling of per-pad/per-module clearance
2016-10-19 17:54:00 +02:00
abbd47e2f2
Remove an unused variable and a debug printf
2016-09-30 09:31:40 +02:00
3257f1a863
pns: fixed inline drag grid snapping & undo-related assertion failure
...
Fixes: lp:1628697
* https://bugs.launchpad.net/kicad/+bug/1628697
2016-09-30 09:29:49 +02:00
4bc4dc80b6
pns: unique_ptr for BOARD_COMMIT member
2016-09-30 09:05:58 +02:00
ad088db6d2
Add more "override" markers.
2016-09-25 13:59:41 -04:00
59c81976dc
Explicitly mark overriding functions.
2016-09-24 14:53:15 -04:00
3623421912
Fixed a PNS crash after undoing the last operation while routing
2016-09-23 13:58:33 +02:00
6a9c1cb6a1
Split the undo/redo event into the two stages "pre" and "post" for convenient synchronization of dependent state.
2016-09-23 13:29:25 +02:00
65821328d2
Fix a crash when dragging a via attached to a locked track (PNS)
...
Fixes: lp:1625835
* https://bugs.launchpad.net/kicad/+bug/1625835
2016-09-21 14:47:14 +02:00
c57fd7ccbf
Fix signed/unsigned comparison warning in PNS::LINE::ClipVertexRange
2016-09-20 14:26:16 -04:00
17806b58f6
Fixed unused variable warnings
2016-09-13 10:06:49 +02:00
5a1f52bf30
Modified tools to use BOARD_COMMIT.
2016-09-12 13:45:57 +02:00
5c0605f6dc
Mute a few warnings
2016-09-12 11:50:06 +02:00
0b8ab2f73d
router: fixed incorrect clearance computation in highlight collisions mode.
...
Fixes: lp:1621186
https://bugs.launchpad.net/kicad/+bug/1621186
2016-09-08 10:30:02 -04:00
03d372a0ec
Fixed an assertion triggered upon line simplification (PNS).
2016-09-06 16:40:40 +02:00
f1e2a2c4c1
Corrected debug information display call. Removed an unused variable.
2016-09-06 16:27:35 +02:00
94aaa47583
Add Remove overloads for specific item types, split removal into index-handling and lifetime-handling (not 100% correct yet, since the index is defactor lifetime-owner, it will be later.)
2016-09-06 16:06:06 +02:00
94fae5d6a1
fix eager dynamic allocation in PNS::NODE::addLine
...
move implementation into PNS::NODE::Add since lines will never be part of the index itself
2016-09-06 16:06:06 +02:00
96a3145543
use unique_ptr at client <-> pns-router border, to document the pns router is taking ownership
...
add overloads for NODE::Add( ... ) taking pointers to specific item types (retain old private add-Functions, they will come in handy later)
LINE overloads now take by reference, to document their special treatment.
updated code throughout affected by these changes
2016-09-06 16:06:06 +02:00
2aef1a4568
use unique_ptr to document ownership (PNS::LINE_PLACER)
2016-09-06 16:06:06 +02:00
4770be0920
Make the segment-ref container a true member of PNS::LINE
...
improve const correctness
return segment container by ref
change client code accordingly
2016-09-06 16:06:06 +02:00
2faca77adf
use unique_ptr to document ownership (PNS::ROUTER)
2016-09-06 16:06:06 +02:00
6c749e0ba8
Remove PNS_ prefix from most types inside namespace PNS
2016-09-06 16:06:06 +02:00
4cf44d9725
Rename pns item kind constants in preparation for renaming pns classes
2016-09-06 16:06:06 +02:00
de6281e977
Move PNS router code into namespace PNS
...
update copyright messages
2016-09-06 16:06:06 +02:00
ca499b80e1
Fixed wxLogTrace() calls in PNS
...
Fixes: lp:1616702
* https://bugs.launchpad.net/kicad/+bug/1616702
2016-08-25 09:24:55 +02:00
Jeff Young
Tomasz Włostowski
Maciej Suminski
Seth Hillbrand
Jon Evans
jean-pierre charras
Camille
Marvin Schmidt
Seth Hillbrand
Fabrizio Tappero
Robbert Lagerweij
Jean-Samuel Reynaud
hauptmech
John Beard
Julius Schmidt
Maciej Suminski
Simon Richter
decimad
Chris Pavlina