Commit e10c01aaf didn't work when touchpad panning was enabled.
This commit changes it to only discard horizontal wheel events
when in "scroll mode" rather than "pan mode".
Based on a patch by Adrian Scripcă <benishor@gmail.com>.
Follow-up to fix: lp:1828080
https://bugs.launchpad.net/kicad/+bug/1828080
(cherry picked from commit e6fe220f84)
Modern mice feature horizontal scrolling capabilities and those end
up being treated by KiCad as regular scroll events causing confusion
among users.
The fix works by discarding the handling of wheel events other than
the ones for the vertical axis.
Fixes: lp:1828080
https://bugs.launchpad.net/kicad/+bug/1828080
(cherry picked from commit e10c01aaff)
When, inside a complex hierarchy, one switch from an instance of a sheet to an other instance of this sheet,
the page number shown in the worksheet was not updated on screen, and the initial number was displayed.
Fix from master branch.
Currently, the format enforces single lines when possible, but does
not enforce readable column-based alignment (and, moreover, *removes*
such manually added alignment:
switch( m_orientation )
{
case PIN_RIGHT: m_orientation = PIN_UP; break;
case PIN_UP: m_orientation = PIN_LEFT; break;
}
Change this to multi-line by default:
switch( m_orientation )
{
case PIN_RIGHT:
m_orientation = PIN_UP;
break;
case PIN_UP:
m_orientation = PIN_LEFT;
break;
}
If the developer wishes for column-aligned single-line cases, this
is permitted, but much be done manually:
switch( m_orientation )
{
case PIN_RIGHT: m_orientation = PIN_DOWN; break;
case PIN_UP: m_orientation = PIN_RIGHT; break;
}
CHANGE: the _clang-format file to reflect this, and add note about
manual override in the dev docs.
(cherry picked from commit 272c045c37)
(cherry picked from commit 4d776034ca)
This also picks up an additional line from 45aa514591 that keeps
CMakeModules/*.cmake. The rest of that commit does not merge cleanly.
Force the symbol library links whenever the symbol library table has been
modified. This will use the cache as a fallback when a library has been
removed that contains links in the schematic rather than display.
Fix the SCH_COMPONENT symbol resolver when falling back to the cache. The
resolver was using the LIB_ID ':' notation which was failing. Replacing
':' with '_' fixed this issue. This was also an issue when generating the
symbol message panel information.
Convert wxLogDebug to wxLogTrace in symbol resolver code path. Add new
trace type KICAD_SYM_RESOLVE.
Fixes lp:1821606
https://bugs.launchpad.net/kicad/+bug/1821606
(cherry picked from commit 7d803437e2)
When Pcbnew's add footprint browser is run up, it constructs
the recently used list without checking for nulls.
Although the DoAddLibrary call does internally check for
null, it's easier to filter these out before placing into
the vector in the first place.
The same logic in the symbol tree is already handled in the
same way.
(cherry picked from commit 42d20cbd96)
There is a rendering bug in GTK3, which appears to be
an upstream GTK issue.
This can be worked around by, when filtering, ensuring the
*parent* item of the selected item is visible. This will
not cause the selected item to not be visible, as the selected
item will be the first shown child. So it will be visible, as long
as the list box is greater than a single row high, which it will be
in all practical scenarios.
This is done on all platforms, as it has a beneficial side-effect:
the parent library of the selection is naturally shown to the
user, so they don't need to scroll up to see what library their
current filter selection was in.
Fixes: lp:1804400
* https://bugs.launchpad.net/kicad/+bug/1804400
(cherry picked from commit 10900c918f)
This can be helpful when tracing where certain configurations
come from (some apps load from other apps' config basenames).
(cherry picked from commit fcc4a84e0e)
Currently, this widget doesn't read the common library settings.
This means it doesn't use the configured DPI scaling or anti-aliasing
settings.
Use the ReadConfig method on the GAL options to fix (rather than
only ReadAppConfig).
Fixes: lp:1825913
* https://bugs.launchpad.net/kicad/+bug/1825913
(cherry picked from commit 33fe9a2761)
These dialogs had logic to avoid a table re-adjustment unless
the width changed. This was done to avoid spurious resizing
calls under GTK+3. This was commit
13249b723b, fixing bug lp:1817810.
However, by only calling event.Skip() when the width changed,
redraws were inhibited when only the height changed.
Placing the Skip() outside the width-change check fixes this,
and does not re-introduce the lp:1817810 bug (it is the column
adjust call that causes that).
Fixes: lp:1826615
* https://bugs.launchpad.net/kicad/+bug/1826615
(cherry picked from commit eccadd92fb)
This fixes the bug exposed in the previous commit.
The tests which exposed it now pass and expected failures
removed.
(cherry picked from commit d89d0e6b74)
The angle needs to be added to the start angle.
Add tests to cover this:
* Check end point is correct
* Check midpoints are within tolerance
This would have prevented the bug fixed in 5813164d1,
as well as the bug fixed in this commit.
As well as failed tests, this manifests when routing across
Edge.Cuts arcs (unless they happen to start at 0 degrees
staritng angle).
Expose as expected failure to prove tests catch it.
Fix to follow in separate commit.
(cherry picked from commit 183f4fe9a5)
The Boost::boost style library dependencies don't work
on some CMake versions (couldn't find library -lBoost::boost)
Use ${Boost_INCLUDE_DIRS} in the target_include_dirs() instead.
Cherry-picked (with changes) from: 1a9aa2e92d
Commit 55fcbddde8 fixed a couple of
failures in the SHAPE_POLY_SET tests, so these no longer
need the expected failure markers.
(cherry picked from commit 371149756d)
Prevent a divide-by-zero bug in SHAPE_ARC::ConvertToPolyline.
When the radius is zero, just use the initial angle (it makes
no different anyway, the result is the centre point, which is
the start point.
(cherry picked from commit e312e2b286)
Add unit test of SHAPE_ARC::ConvertToPolyline.
This function has a bug when the arc is of zero radius. This
test shows the bug, but does not fix it yet.
(cherry picked from commit ce84c19a38)
This is not technically correct (the Boost dependency is introduced through
libcommon), but less invasive as it doesn't pull in libcommon on the linker
command line.
In the component, an m_unit/m_convert element is 1-indexed as opposed to
the library where they are 0-indexed. The 0-index in the library is
reserved for those elements that are shared across all conversion/unit
whereas it is invalid for the component.
Fixes: lp:1824764
* https://bugs.launchpad.net/kicad/+bug/1824764
More recent Kicad_pcb files have quoted layer names (i.e.
strings, not symbols). The importer in K2S doesn't handle that,
so it chokes on elements like (layer "Edge.Cuts").
Fixes: lp:1824750
* https://bugs.launchpad.net/kicad/+bug/1824750
(cherry picked from commit c135158364)
When displaying a sheet from this path, it's possible the sheet will
not have been initialized yet. Call DisplayCurrentSheet() to make sure
it is initialized, and then call RedrawScreen to update the zoom level.
Fixes: lp:1824362
* https://bugs.launchpad.net/kicad/+bug/1824362
Move repeated GAL config reading routines into GAL_DISPLAY_OPTIONS.
THe app-level config is in here already, do the same for the
common config.
This means that the configs are loaded consistently, which fixes
the symbol-chooser preview window, which previously didn't use the
same config routine as other GAL canvases.
Future work could move these functions to free functions that
act on the public interface of GAL_DISPLAY_OPTIONS to avoid
GAL_DISPLAY_OPTIONS having to know about wxConfig and wxWindow.
Fixes: lp:1824524
* https://bugs.launchpad.net/kicad/+bug/1824524
(cherry picked from commit ab2281d26f)
Previously, the GAL_DISPLAY_OPTIONS object in FOOTPRINT_PREVIEW_PANEL::New
was passed by reference in the ctor, down to EDA_DRAW_PANEL_GAL, which stored
it as a reference. The object in New() then goes out of scope, so the
referencing panel outlives the options.
Fix this by making a copy in a std::unique_ptr of the options, and giving
ownership to the panel.
There is another issue here: when the Pcbnew options are copies, the
OBSERVABLE subscriber list is copied too. This means if the panel called
NotifyChanged() on the options, Pcbnew would get updates, even though a copy
of the options changed. However, the panel doesn't change the options or
notify, so it's OK for now.
(cherry picked from commit 17e88d0944)
John Beard
Adrian Scripca
jean-pierre charras
Seth Hillbrand
Wayne Stambaugh
Tomasz Włostowski
Michael Kavanagh
Jeff Young
Jon Evans
Simon Richter