Commit Graph

146 Commits

Author SHA1 Message Date
jean-pierre charras a356293fee Cvpcb: Fix incorrect unique pad count for footprints using mixed letters/digits in pad name (like AA12, AB12 or Anod for instance.) and skip pads with no pad name. 2015-11-13 12:32:42 +01:00
jean-pierre charras d63c017a0a Exchange footprints: remove duplicate code, and keep the "Locked" attribute state after exchange/replace. 2015-10-22 18:50:27 +02:00
jean-pierre charras 4fc230b773 Rework on Enum PAD_SHAPE_T, PAD_DRILL_SHAPE_T and PAD_ATTR_T (see rev 6008) : the new and better names are now used in Kicad code and existing python scripts.
PAD_SHAPE_T  and PAD_ATTR_T still have a double definition (new names and old names) to be sure python scripts are nor broken by the change.
 PAD_DRILL_SHAPE_T does not  have a double definition, because it is unlikely oblong holes are used in python scripts.
Double definitions will be removed in the (next) future.
2015-08-23 21:40:33 +02:00
Tomasz Wlostowski 63b35f40a7 Removed all dependencies on boost::polygon except for bitmap2component. Replaced almost all instances of CPOLYGONS_LIST with SHAPE_POLY_SET. 2015-07-27 21:45:57 +02:00
Maciej Suminski d2ebf688f9 Reverted commits that remove boost::polygon dependency (need more testing). 2015-07-14 22:23:13 +02:00
Tomasz Wlostowski 41c753b05d Removed all dependencies on boost::polygon except for bitmap2component. Replaced almost all instances of CPOLYGONS_LIST with SHAPE_POLY_SET. 2015-07-14 13:36:24 +02:00
https://launchpad.net/~john-j-beard 0350290499 Fix Bug #1426675 (Undo and cancel commands don't have effect for Duplicate operation in legacy mode) 2015-03-22 10:42:41 +01:00
Maciej Suminski 0dd9efd9db Merged the differential pair router & length tuning tool. 2015-03-03 11:50:50 +01:00
Maciej Suminski f06690c8d3 Merged lp:~john-j-beard/kicad/moveexact. 2015-02-18 20:27:00 +01:00
Maciej Suminski 4fb9bce354 Code formatting. 2015-02-18 17:53:46 +01:00
Tomasz Włostowski 5d78a007cc added ClassOf() for DRAWSEGMENTs, PADs and PCB_TEXTs 2015-02-18 00:53:57 +01:00
John Beard 4f3672da4d Add "move exact" and "duplicate" tools to pcbnew 2015-02-12 03:22:24 +00:00
jean-pierre charras ac539b9578 Minor and very minors fixes: move -DKICAD_USE_WEBKIT definition to the main CMakeLists.txt. Remove duplicate semi-colon at end of some lines. 2015-01-17 09:01:16 +01:00
Maciej Suminski 8e90a6167b Rotate support for pads. 2014-07-09 13:50:27 +02:00
Maciej Suminski 953f71df3e Move() method updates local coordinates in EDGE_MODULE, D_PAD and TEXTE_MODULE classes. 2014-07-09 11:59:24 +02:00
jean-pierre charras eb396a5e88 Fix footprint wizard issues. Fix export vrml incorrect Z position of items. 2014-07-02 15:08:28 +02:00
Dick Hollenbeck add4d5eb6f re-work the LSET(int,...) constructor 2014-06-29 13:09:32 -05:00
Dick Hollenbeck 4578ea8b9e 1) Add 32 Cu Layers.
2) Change from legacy Cu stack to counting down from top=(F_Cu or 0).
   The old Cu stack required knowing the count of Cu layers to make
   sense of the layer number when converting to many exported file types.
   The new Cu stack is more commonly used, although ours still gives
   B_Cu a fixed number.
3) Introduce class LSET and enum LAYER_ID.
4) Change *.kicad_pcb file format version to 4 from 3.
5) Change fixed names Inner1_Cu-Inner14_Cu to In1_Cu-In30_Cu and their
   meanings are typically flipped.
6) Moved the #define LAYER_N_* stuff into legacy_plugin.cpp where they
   can die a quiet death, and switch to enum LAYER_ID symbols throughout.
7) Removed the LEGACY_PLUGIN::Save() and FootprintSave() functions.
   You will need to convert to the format immediately, *.kicad_pcb and
   *.kicad_mod (=pretty) since legacy format was never going to know
   about 32 Cu layers and additional technical layers and the reversed Cu
   stack.
2014-06-24 11:17:18 -05:00
jean-pierre charras d54ade9403 Rework on DXF export. 2014-05-17 21:29:15 +02:00
Lorenzo Marcantonio 342016b692 Constification of HitTest and GetParent
In particular HitTest for zones *do not* select the nearest vertex/edge as a side effect
2014-05-04 19:08:36 +02:00
Lorenzo Marcantonio 7b4b3297db - Better way to iterate on vias in the track list (GetFirstVia)
- Converted the Next/Prev C casts to static casts and removed the type
  unsafe ones
- Splitted as virtual the VIA::Flip member instead of using RTTI
- Heavily refactored the 'unconnected track' cleanup routine
- Misc constification
2014-04-30 21:16:22 +02:00
Dick Hollenbeck 6bfff89fe5 merge tip in, resolve. 2014-03-20 01:24:33 -05:00
Dick Hollenbeck 2c67c3ff80 * KIWAY Milestone A): Make major modules into DLL/DSOs.
!   The initial testing of this commit should be done using a Debug build so that
    all the wxASSERT()s are enabled.  Also, be sure and keep enabled the
    USE_KIWAY_DLLs option.  The tree won't likely build without it.  Turning it
    off is senseless anyways.  If you want stable code, go back to a prior version,
    the one tagged with "stable".

*   Relocate all functionality out of the wxApp derivative into more finely
    targeted purposes:
    a) DLL/DSO specific
    b) PROJECT specific
    c) EXE or process specific
    d) configuration file specific data
    e) configuration file manipulations functions.

    All of this functionality was blended into an extremely large wxApp derivative
    and that was incompatible with the desire to support multiple concurrently
    loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects.
    An amazing amount of organization come from simply sorting each bit of
    functionality into the proper box.

*   Switch to wxConfigBase from wxConfig everywhere except instantiation.
*   Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD,
    PGM_SINGLE_TOP,
*   Remove "Return" prefix on many function names.
*   Remove obvious comments from CMakeLists.txt files, and from else() and endif()s.
*   Fix building boost for use in a DSO on linux.
*   Remove some of the assumptions in the CMakeLists.txt files that windows had
    to be the host platform when building windows binaries.
*   Reduce the number of wxStrings being constructed at program load time via
    static construction.
*   Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that
    these functions are useful even when the wxConfigBase comes from another
    source, as is the case in the KICAD_MANAGER_FRAME.
*   Move the setting of the KIPRJMOD environment variable into class PROJECT,
    so that it can be moved into a project variable soon, and out of FP_LIB_TABLE.
*   Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all
    its child wxFrames and wxDialogs now have a Kiway() member function which
    returns a KIWAY& that that window tree branch is in support of.  This is like
    wxWindows DNA in that child windows get this member with proper value at time
    of construction.
*   Anticipate some of the needs for milestones B) and C) and make code
    adjustments now in an effort to reduce work in those milestones.
*   No testing has been done for python scripting, since milestone C) has that
    being largely reworked and re-thought-out.
2014-03-19 19:42:08 -05:00
Maciej Suminski 151826b206 Upstream merge. 2014-02-21 11:05:28 +01:00
jean-pierre charras 63eac42d07 Fix a minor error in class D_PAD: void D_PAD::Flip( int Y ) changed to virtual void D_PAD::Flip( const wxPoint& aCentre ) (as defined in BOARD_ITEM)
Scripting: fix compatibility current pcbnew version in 2 examples and the default extension of board files  in board.i (was .kicad_brd, now is .kicad_pcb)
2014-02-13 18:27:48 +01:00
Maciej Suminski 7f6bc781aa Upstream merge. 2014-01-28 10:43:55 +01:00
jean-pierre charras 3354bdde05 Pcbnew: fix bug #1272714 . Code cleanup: use 2 different enums for pad shapes and pad drill shapes. Remove never used pad shape. 2014-01-26 15:20:58 +01:00
Maciej Suminski 654e7e556e Removed D_PAD::SetNetname() function and D_PAD::m_Netname, D_PAD::m_ShortNetname fields.
D_PAD::GetNetname() and D_PAD::GetShortNetname() were moved to BOARD_CONNECTED_ITEM. Now they use the net name stored in NETINFO_ITEM.
Moved some one-line functions from class_board_connected_item.cpp to class_board_connected_item.h.
Added a copyright notice, moved Doxygen comments from class_board_connected_item.cpp to class_board_connected_item.h.

I have some doubts if changes introduced pcbnew/dialogs/dialog_pad_properties.cpp do not break anything, but I could not find a test case that breaks the pcbnew.

Performed tests:
- changed pad's net name from empty to existent - ok, name was changed
- changed pad's net name from empty to nonexistent - ok, error message is displayed, net name stays empty
- changed pad's net name from existent to empty - ok, net name became empty
- changed pad's net name from existent to nonexistent - ok, error message is displayed, net name is not changed
- (re)reading netlists, including net changes - fine, changes are applied, but empty nets are still kept
- loaded pcbnew/pcad2kicadpcb_plugin/examples/CK1202_V1.pcb to test P-CAD import plugin - ok, net names are correct
- imported an Eagle 6.0 board (Arduino Uno; http://arduino.cc/en/uploads/Main/arduino_Uno_Rev3-02-TH.zip) then saved in .kicad_pcb format and reloaded - ok, net names are correct
- saved demos/video/video.kicad_pcb in legacy format and then loaded it again - ok, net names are correct
2014-01-14 10:41:52 +01:00
Maciej Suminski bf80cc770e Changed the way of looking up NETINFO_ITEM using net names (using boost::unordered_map). Added a hash function (wxString) for that. Introduced NETINFO_ITEM::GetNetItem( wxString ). BOARD::FindNet() uses the map.
Net codes are updated upon net list update. (BOARD::ReplaceNetlist())
Added in some places (mostly class_board.cpp) pad->SetNet() calls to synchronize net codes.
On creation of NETINFO_LIST, the first NETINFO_ITEM is added (the unconnected items net).
Removed COMPONENT_NET::m_netNumber, as it was not used anywhere.
Added an assert to D_PAD::GetNetname(), checking if net code and net name is consistent for unconnected pads. Added an assert for NETINFO_LIST::AppendNet() to assure that appended nets are unique.

It seems that at this point:
- Updating net lists works fine. The only difference between the file ouput is that after changes it contains empty nets as well.
- Nets are not saved in the lexical order. Still, net names and net codes are properly assigned to all items in the .kicad_pcb file. It is going to be addressed in the next commit. I believe it should not create any problems, as pads are sorted by their net names anyway (NETINFO_LIST::buildPadsFullList())

Performed tests:
- Created a blank PCB, saved as pic_programmer.kicad_pcb (from demos folder). Updated net lists. .kicad_pcb file (comparing to the results from master branch) differ with net order (as mentioned before), net codes and timestamps.
- Removed some of components from the above .kicad_pcb file and updated net lists. Modules reappeared. .kicad_pcb file differs in the same way as described above.
- Trying to change a pad net name (via properties dialog) results in assert being fired. It is done on purpose (as there is a call to GetNetname() and net name and net code do not match). This will not happen after the next commit.
- Prepared a simple project (starting with schematics). Imported net list, changed schematic, reimported net list - changes are applied.
- Eagle & KiCad legacy boards seem to load without any problem.
2014-01-10 18:04:07 +01:00
jean-pierre charras 5f01f123de All: GetBoundingBox returns now a const EDA_RECT.
Pcbnew: Code cleaning and bug fix in autoplace functions
Dialog exchange footprints has now a separate button to update the .cmp file, only on request.
2013-11-24 18:48:14 +01:00
Maciej Suminski 8753bef2fa Moved VIEW_ITEM::ViewGetRequiredLayers() functionality to the VIEW class. Now required layers are set per layer basis instead of per item. 2013-08-05 16:28:58 +02:00
Maciej Suminski 8d7054a592 Added drawing of solderpaste layer for pads. 2013-07-31 14:51:20 +02:00
Maciej Suminski ee1b8e2a80 Added display of soldermask for pads. 2013-07-26 18:15:11 +02:00
Maciej Suminski 36f1147da1 Upstream merge. 2013-07-08 15:05:12 +02:00
Maciej Suminski 3841b0ac3a Showing net names on pads. 2013-07-08 11:30:50 +02:00
jean-pierre charras 10352b1df5 Minor fixes. Gerbview: fix a collision name for GetLayout method. 2013-06-27 21:12:01 +02:00
Maciej Suminski e9ebdf2583 Upstream merge. 2013-06-05 10:01:53 +02:00
Lorenzo Marcantonio af5a9a8de9 Removed Show code from BOARD_ITEM derived classes (as requested by Dick) 2013-05-05 12:23:18 +02:00
Lorenzo Marcantonio d00c83cde9 Migrated the interfaces accepting angles to the double type
The plan goes like this:
- eeschema still uses int in decidegrees
- all the other things internally use double in decidegrees (or radians
  in temporaries)
- in pcbnew UI the unit is *still* int in decidegrees

The idea is to have better precision everywhere while keeping the user with int i
angles. Hopefully, if a fractional angle doesn't come in from the outside, everything
should *look* like an integer angle (unless I forgot something and it broke)

When the time comes, simply updating the UI for allowing doubles from the user should
be enough to get arbitrary angles in pcbnew.
2013-05-05 09:17:48 +02:00
jean-pierre charras b2a76062c7 All: use CPOLYGONS_LIST, a typedef of std::vector<CPolyPt> to handle a Corners Polygons List.
This is a starting point of some code enhancements relative to polygons in Pcbew and 3D viewer.
2013-05-03 19:51:10 +02:00
jean-pierre charras 4ac7dd5845 3D viewer: Modify yhe way board items shapes are built:
* All items shapes  are converted to polygons.
* Polygons are merged layer by layer (for calculation time reasons,zones are not merged)
* for copper layers, vias and pads holes are substracted from polygons (but, for calculation time reasons,  not inside zones areas).
* the look is better, mainly when displaying the copper thickness
* solder and paste layers are now shown in 3D viewer.
* the code was seriously cleaned (but still needs to be enhanced).
* Note this is a work in progress which needs refinements.
2013-05-01 21:01:14 +02:00
Maciej Suminski 0cd108b55d Upstream merge. 2013-04-25 18:42:27 +02:00
Wayne Stambaugh 61b4f8a9eb Pcbnew NETLIST_READER improvements.
* Create separate NETLIST object to hold contents of netlist files.
* Read entire netlist and footprint link files before making applying
  changes to board.
* Add BOARD::ReplaceNetlist() function to eliminate the calls between the
  NETLIST_READER, PCB_EDIT_FRAME, and BOARD objects.
* Change placement of new components below the center of the current board
  or in the center of the page if the BOARD is empty.
* Add dry run option to netlist dialog to print changes to message control
  without making changes.
* Add button to netlist dialog to allow saving contents of message control
  to a file.
* Eliminate the need to compile netlist_reader_*.cpp in both CvPcb and Pcbnew.
* Add netlist_reader_*.cpp to the pcbcommon library.
* Remove redundant load component link file code from CvPcb.
* Modify CvPcb new to work with the new NETLIST_READER object.
* Add compare() function and < and == operators to FPID object.
* Add REPORTER class to hide an underlying string writing implementation for
  use in low level objects.  Thank you Dick for the idea.
* Lots of minor coding policy, Doxygen comment, and missing license fixes.
2013-04-25 12:29:35 -04:00
Maciej Suminski 07cd3bcb56 Upstream merged 2013-04-10 15:03:35 +02:00
Maciej Suminski e262b32198 Introduction of Graphics Abstraction Layer based rendering for pcbnew.
New classes:
    - VIEW - represents view that is seen by user, takes care of layer ordering & visibility and how it is displayed (which location, how much zoomed, etc.)
    - VIEW_ITEM - Base class for every item that can be displayed on VIEW (the biggest change is that now it may be necessary to override ViewBBox & ViewGetLayers method for derived classes).
    - EDA_DRAW_PANEL_GAL - Inherits after EDA_DRAW_PANEL, displays VIEW output, right now it is not editable (in opposite to usual EDA_DRAW_PANEL).
    - GAL/OPENGL_GAL/CAIRO_GAL - Base Graphics Abstraction Layer class + two different flavours (Cairo is not fully supported yet), that offers methods to draw primitives using different libraries.
    - WX_VIEW_CONTROLS - Controller for VIEW, handles user events, allows zooming, panning, etc.
    - PAINTER/PCB_PAINTER - Classes that uses GAL interface to draw items (as you may have already guessed - PCB_PAINTER is a class for drawing PCB specific object, PAINTER is an abstract class). Its methods are invoked by VIEW, when an item has to be drawn. To display a new type of item - you need to implement draw(ITEM_TYPE*) method that draws it using GAL methods.
    - STROKE_FONT - Implements stroke font drawing using GAL methods.
                          
Most important changes to Kicad original code:
    * EDA_ITEM now inherits from VIEW_ITEM, which is a base class for all drawable objects.
    * EDA_DRAW_FRAME contains both usual EDA_DRAW_PANEL and new EDA_DRAW_PANEL_GAL, that can be switched anytime.
    * There are some new layers for displaying multilayer pads, vias & pads holes (these are not shown yet on the right sidebar in pcbnew)
    * Display order of layers is different than in previous versions (if you are curious - you may check m_galLayerOrder@pcbnew/basepcbframe.cpp). Preserving usual order would result in not very natural display, such as showing silkscreen texts on the bottom.
    * Introduced new hotkey (Alt+F12) and new menu option (View->Switch canvas) for switching canvas during runtime.
    * Some of classes (mostly derived from BOARD_ITEM) now includes ViewBBox & ViewGetLayers methods.
    * Removed tools/class_painter.h, as now it is extended and included in source code.
                         
Build changes:
    * GAL-based rendering option is turned on by a new compilation CMake option KICAD_GAL.
    * When compiling with CMake option KICAD_GAL=ON, GLEW and Cairo libraries are required.
    * GAL-related code is compiled into a static library (common/libgal).
    * Build with KICAD_GAL=OFF should not need any new libraries and should come out as a standard version of Kicad
                            
Currently most of items in pcbnew can be displayed using OpenGL (to be done are DIMENSIONS and MARKERS).
More details about GAL can be found in: http://www.ohwr.org/attachments/1884/view-spec.pdf
2013-04-02 08:54:03 +02:00
Lorenzo Marcantonio 9fd79dfa91 Implemented the LAYER_NUM typedef (LAYER was already taken as a class name...) to represent a layer number. 2013-03-31 15:27:46 +02:00
Lorenzo Marcantonio e0303a4558 - New typedef LAYER_MSK to encapsulate a layer bitmap
- Renamed ReturnMaskLayer to GetLayerMask (since it's a plain getter)
2013-03-30 18:24:04 +01:00
Wayne Stambaugh 330b8bff30 Fix bug caused by setting default drill size in D_PAD (fixes lp:1123392).
* Add check for pad type and force drill size to zero if pad is surface
  mount in PCB_PARSER.
* Modify the D_PAD SetAttribute method to clear drill size if pad type is
  set to surface mount.
2013-02-12 20:01:22 -05:00
Wayne Stambaugh f8a56d446f Base object decoupling improvements.
* Improve MSG_PANEL_ITEM to handle message panel information.
* Create containers for passing message panel items between objects and
  the message panel.
* Rename EDA_ITEM::DisplayInfo to EDA_ITEM::GetMsgPanelInfo.
* Remove all direct manipulation of EDA_DRAW_FRAME from all objects derived
  from EDA_ITEM.
2013-01-12 12:32:24 -05:00
jean-pierre charras b4f0230658 Pcbnew: fix Bug #1089120. Also change "Length Die" expression to "Length Pad To Die" in code 2012-12-12 12:57:17 +01:00