15d52c91e4
Clear ratsnest when removing nets
...
While we can keep the vector for nets, we need to ensure that the data
are cleared to prevent stale pointer access
Fixes https://gitlab.com/kicad/code/kicad/issues/12564
2022-10-03 09:33:31 -07:00
6d298b661a
Minor speedup for some dynamic ratsnest cases
2022-10-01 13:43:57 -07:00
f095453d3e
Optimize ratsnest line endings for zones.
2022-09-30 19:04:54 +00:00
d67437a2aa
Move ratsnest exclusion processing to a post-pass.
...
Also fixes a few cases where we were unnecessarily rebuilding
connectivity more than once for an operation.
2022-09-29 17:08:49 +01:00
dc07ab9df1
Replace PROF_COUNTER with PROF_TIMER in some conditional places.
2022-09-27 14:07:47 +00:00
700edb95e3
PCB Actions: Grab Unconnected
...
Grabs the nearest unconnected item for each selected footprint/pad.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/1986
2022-09-26 16:17:41 -04:00
26a1114e3c
Avoid Yields when the results are ready
...
We always need to check for calculation results before yielding the
system otherwise we will delay outcomes
Fixes https://gitlab.com/kicad/code/kicad/issues/12228
2022-09-14 13:30:04 -07:00
c30a557810
ADDED netclass assignment from PCB canvas.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5975
2022-09-03 19:29:59 +01:00
2dc6300501
Move EDA_ITEM bounding boxes to BOX2I.
2022-08-31 10:16:55 +01:00
aa2ad3b44c
Move KICAD_T[] to std::initializer_list<KICAD_T>.
2022-08-20 10:28:11 +01:00
35ac39844f
Clean up some auto usage
...
Don't make new copies of shared_ptr if we can use references. Keep auto
usage down to hard-to-type-out sequences
2022-08-15 11:29:45 -07:00
a9536b5de9
CHANGED netclass assignments now done via canvas or via patterns.
2022-08-14 22:56:29 +01:00
96f01d33c8
Performance improvements.
...
1) Move a bunch of std::map's to std::unordered_map to get constant-time
look-ups
2) Lengthen progress-reporting intervals to spend more time doing work
and less time talking about it
3) Reverse order of SHAPE_LINE_CHAINs in thermal intersection checks to
make (much) better use of bbox caches
4) Don't re-generate bboxes we already have
5) Fix some autos that weren't by reference (and were therefore copying
large datasets)
6) Rename delta progressDelta so it's easier to search for in future
7) Get rid of a few more autos (because I don't like them)
8) Pass large items to lambdas by reference
Fixes https://gitlab.com/kicad/code/kicad/issues/12130
2022-08-03 11:59:42 +01:00
4d48376eae
Fix some warnings detected by PVS-STUDIO (not used vars)
2022-07-26 16:00:14 +02:00
f41af10007
Clean up hole shapes for safety (smart pointer) and consistency.
2022-07-22 23:06:07 +01:00
03c279ffd4
ADDED: Threadpool
...
Thread pools are long-lasting executors that have close to zero overhead
when launching new jobs. This is advantageous over creating new threads
as we can use this for threading smalling jobs and smaller quanta. It
also avoids the heuristics needed to determine the optimal number of
threads to spawn
2022-06-24 22:59:24 +00:00
82ebc247b8
More performance enhancements for DRC.
2022-06-18 19:47:11 +01:00
3f502b313d
Don't return false when a particular item doesn't connect.
...
We still have to search all the other items, as they might connect.
2022-05-23 10:26:18 +01:00
442aae19d9
Separate flashing check for connectivity
...
When building the connectivity database, we should not be using the
connectivity to check for shapes.
To make this deterministic, we introduce two flags (ALWAYS_FLASH and
NEVER_FLASH) that are used with connectivity building to determine
whether a pad is flashed for connectivity or not. ZONE <-> PAD/VIA
connectivity will be checked with ALWAYS_FLASHED and all other
connectivity will be checked with NEVER_FLASHED if they are marked for
potential annular ring removal. If they are not marked for removal,
they will be checked ALWAYS_FLASHED.
Fixes https://gitlab.com/kicad/code/kicad/issues/11114
2022-03-16 17:30:01 -07:00
cabcaf933c
Cleanup.
2022-03-16 14:56:32 +00:00
7fb4a2c0a5
CONNECTIVITY_DATA::IsConnectedOnLayer(): fix crash in some cases.
...
Fix crash when a zone do not have filled areas on a given layer.
2022-03-12 19:31:46 +01:00
0a8718cd1d
Fix issue when we ask if a pad is connected to a zone we're in the middle of filling.
2022-03-12 14:17:53 +00:00
eb9ccea559
Performance improvement.
2022-03-10 13:46:42 +00:00
fed5bcbdf6
Improvements for pads/vias in zones which knockout other zones.
...
1) Drop tiny islands which might cause connection problems.
2) Cleanup some dead code in filler
3) Don't estabilish a connection to an island that is fully covered
by whatever its connecting to.
Fixes https://gitlab.com/kicad/code/kicad/issues/11036
2022-03-05 18:59:53 +00:00
b5c2f0d39a
Remove the open array in favor of std containers
...
The containers allow iteration, size knowledge and lower bug surface
2022-03-03 16:03:26 -08:00
d9d23dd06b
Commenting.
2022-02-21 12:26:59 +00:00
aa2c8e9b0c
A more discerning un-flashed-connectivity test.
2022-02-20 23:49:02 +00:00
fad4c135fa
Use only a physical connection to determine flashing of pads.
...
Checking for proper nets just confuses things when the nets are set
wrongly for some reason. This way we generate clearer DRC errors.
Fixes https://gitlab.com/kicad/code/kicad/issues/10645
2022-02-20 20:54:56 +00:00
08383e923c
Formatting.
2022-02-16 14:18:25 +00:00
ca095896cb
Performance: multi-thread CN_ZONE_LAYER RTree generation.
2022-02-16 14:11:09 +00:00
3b292a4941
Cleanup and code clarity.
2022-02-16 12:00:18 +00:00
72a389e612
Performance: check line ends first before doing collision.
2022-02-15 19:19:03 +00:00
2172810600
Performance: better sharing of zone fills.
2022-02-15 19:19:03 +00:00
d8c4f2cb09
Performance improvements for zone filler.
2022-02-15 19:19:02 +00:00
8e26946567
Don't shrink progress reporter when message changes; only grow.
2022-02-15 19:19:02 +00:00
5c9e718407
Performance enhancements for connectivity.
...
1) Generate SHAPE_POLY_SET triangulation by outline so they can be
shared between connectivity system and other clients.
2) Don't add items to connectivity when reading board; we're going
to do a total rebuild anyway.
3) Use multithreading when caching triangulation.
2022-02-15 12:20:34 +00:00
98b9c6e2a1
Better progress reporting and a slight performance boost on commit.
2022-02-15 12:20:34 +00:00
d2de114d21
More performance optimizations.
2022-02-15 12:20:34 +00:00
d07910de06
Improve performance of checkZoneZoneConnection.
2022-02-14 01:15:06 +00:00
bff97df5f9
Fix a compil warning, at least on my msys install.
2022-02-13 16:26:05 +01:00
c4e133fdf7
Auto reduction and std::shared_ptr cover types reduction.
...
And a performance optimization or two resulting from above. (Using
const& intead of copying std::shared_ptrs.)
2022-02-13 12:04:03 +00:00
90f6edad61
Move connectivity algo to collision-based routines.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/1800
Fixes https://gitlab.com/kicad/code/kicad/issues/1769
2022-02-13 00:35:11 +00:00
3deaf902bb
Retire the V5 zone fill algorithm.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10578
2022-02-11 13:10:52 +00:00
6e063247e5
Move CN_VISITOR from HitTest() to Collide().
...
The former isn't sufficiently aware of layer differences (such as for
pads with some layers unflashed).
2022-02-11 13:10:52 +00:00
e59aaf05c6
Make sure that GetConnectedItems searches from the root item.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10583
2022-02-06 19:43:25 +00:00
41f54349a5
Replace inserts/push_backs with emplace in some spots
2022-02-05 19:53:31 -05:00
7ccac79192
More wxString wide literals.
2022-02-05 21:29:34 +00:00
dcaec78cc5
A bit more angle cleanup.
2022-01-18 02:18:55 +00:00
d485eb2514
Move pads to EDA_ANGLE.
2022-01-14 16:08:18 +00:00
ac715d2e51
Scoop up some more wxPoint instances
2022-01-03 20:00:53 -05:00
Seth Hillbrand
Jeff Young
Alex
Mike Williams
jean-pierre charras
Marek Roszko