I tried to merge some constants used both in legacy mode and gal mode (which were, before this patch, separate constants).
There is still a serious work to avoid different calculation code for the same text in draw and plot functions.
Work in progress to merge these calculation functions.
* Move add_directory()s in main CMakeList.txt after all find_package()
macros are run so all flags in the main CMakeList.txt are propagated
to the sub-folder CMakeList.txt files.
* Remove commented out include of config.h
* Make the link maps only build on linux as -${TO_LINKER},-cref
-${TO_LINKER},-Map=blah just gives warnings on osx w/ clang
* Make the link maps only build with flag -DKICAD_MAKE_LINK_MAPS is
defined during CMake configuration as they are highly specific.
* Moved the code for setting link maps into the main CMakeList.txt
file to avoid duplication.
* Removed -D__ASSERTMACRO__ from osx as its no longer needed
* Removed a couple of other OSX only things that wouldn't work anyway
* Moved set (BU_CHMOD_BUNDLE_ITEMS) to the main CMakeList.txt as
otherwise it would only work for the KiCad build not the other
applications
* Made KICAD_SCRIPTING_MODULES enable KICAD_SCRIPTING as currently if
you have modules enabled without the scripting base it will on build.
This could be changed to a fatal error saying you need to also enable
scripting but it seems unnecessary.
* Removed duplication of pcbnew.py install code under modules and
scripting since you can't have modules without scripting now
* The resource setting for bitmap2component is too late in the CMakeLists.txt,
and is being ignored. Bitmap2component does not have an icon resource on
Windows. Moving the entire section resolves the issue.
* The other programs only have the mingw special case listed, not the generic
declaration for the resource file so added them.
* Make the about dialog help string consistent across all menus.
* Improve print preview window and print initialization error messages.
* The usual smattering of coding policy fixes.
* Use "Close" in the file menu of every main frame window instead of the
mismatch of the terms "Close", "Exit", and "Quit".
* Change the terminology in the Pcbnew graphic text edit dialog to match the
module text edit dialog.
* Improve the layout of the Pcbnew graphic text dialog.
* Fix some wxPrintf parameter type assertions for 64 bit time_t.
* Fix all (at least I think I got all of them) duplicate menu accelerator
characters.
Previously, only the lib named "power" was used (and therefore power parts defined in other libs not shown).
Now, all power parts can be loaded from any library.
Also, when loading power parts from the chose component dialog or the lib viewer, libs and parts are filtered: only power parts and libs containing power parts are listed.
Hotkeys: move a few global strings in the files where ther are actually used (and make them local.) and code cleaning.
Fix a few other minor issues.
Eeschema now uses dashed lines for graphic lines (to be consistent with plot functions and toolbal icon).
Fix an old bug in some envionments which warp the mouse on a bad monitor when opening eeschema, pcbnew and some other windows, only noticeable guys who are lucky enough to have more than one monitor.
Fix issue when using a page layout file in project folder: eeschema and Pcbnew did not use it, unless using an absolute path.
Now, if the file path is nor absolute, it is seen as relative to the project (which is the expected behavior)
fp lib wizard: when pcbnew id compiled with USE_GITHUB_PLUGIN=OFF, the github plugin option is no more accessible (and the web viewer no more used).
Rename "Switch highcontrast" to "Toggle High Contrast".
Eliminate most of the abbreviated hotkey titles.
Doxygenize dialog_hotkeys_editor.h and add missing license block.
Display <unassigned> if key code is 0 (NULL).
Refactor hotkey editor to use tab control instead of one giant list.
Each tab is a separate hotkey section.
Modify EDA_HOTKEY_CONFIG to change the m_Comment member to m_Title for a new purpose.
We want a pretty title in the hotkey editor. We use m_Title for the key export comment which
still conveys the purpose just as easily.
Refactored usage of wxGrid into wxListCtrl which allows capturing navigation characters
and also works better (single selection is built in).
Add hotkey overwrite prompts that are paired with "Common" section. It will check if a hotkey
overlaps with the proper sections. i.e. Common with the all other sections; or Section 1 with just Common.
Right-click menu removed due to wxListCtrl being able to catch the special keys properly.
* Fix creation of single app bundle with respect to scripting support.
* Cleanup scripting search paths for OSX.
* Fix some small CMake bugs from previous OSX build change.
* Optimize bundle file structure to be consistent with Apple specs.
* Add helper script for compiling wxWidgets and wxPython
* Update OSX build instructions.
* Compile all binaries into a single application bundle.
* Use CMake BundleUtilities to make application bundle relocatable.
* Restructure build output to directly create an image file.
* Fix default search paths.
* Set KIGITHUB environment variable.
* Added patch to fix wxWidgets so names for OSX.
* Add hot key handled return indicator to DRAW_FRAME::GeneralControl() and
DRAW_FRAME::OnHotKey() and all classed derived from DRAW_FRAME.
* Add code to all GeneralControl() and OnHotKey() functions to return true if
hot key was handled.
* Call event skip in DRAW_PANEL::OnKeyEvent() when key event is not handled to
allow default menu event handler to function properly.
Ensure some values initialized by the schematic editor and used by libedit are also initialized in libedit even if the schematic editor was not started.
Remove useless commands (save/load project config) in libedit, because now they have no sense.
2) Change from legacy Cu stack to counting down from top=(F_Cu or 0).
The old Cu stack required knowing the count of Cu layers to make
sense of the layer number when converting to many exported file types.
The new Cu stack is more commonly used, although ours still gives
B_Cu a fixed number.
3) Introduce class LSET and enum LAYER_ID.
4) Change *.kicad_pcb file format version to 4 from 3.
5) Change fixed names Inner1_Cu-Inner14_Cu to In1_Cu-In30_Cu and their
meanings are typically flipped.
6) Moved the #define LAYER_N_* stuff into legacy_plugin.cpp where they
can die a quiet death, and switch to enum LAYER_ID symbols throughout.
7) Removed the LEGACY_PLUGIN::Save() and FootprintSave() functions.
You will need to convert to the format immediately, *.kicad_pcb and
*.kicad_mod (=pretty) since legacy format was never going to know
about 32 Cu layers and additional technical layers and the reversed Cu
stack.
They are now member of EDA_DRAW_FRAME.
This change could fix Bug #1330781 (Background color change in Eeschema affects background color in Pcbnew)
Show page limits has meaning only for the schematic editor, the board editor and the page layout editor.
Draw background color selection exists only in eeschema and page layout editor.
In pcbnew, only a black background is allowed.
A side effect is now the user should set the background color in schematic editor, and the library editor (2 different options).
The default is still the white color.
- Refactored the common part of cursor key movement and crosshair update
in the various GeneralControl
- Add x10 movement with the keyboard (CTRL modifier)
- Avoid fixup of the cursor position by dummy mouse movements generated
by cursor warping (original analysis and idea Chris Gibson)
- Do key handling in a way to permit sub-pixel cursor movement
*) Rework the set language support, simplify it by using KIWAY. Now any major
frame with a "change language" menu can change the language for all KIWAY_PLAYERs
in the whole KIWAY. Multiple KIWAYs are not supported yet.
*) Simplify "modal wxFrame" support, and add that support exclusively to
KIWAY_PLAYER where it is inherited by all derivatives. The function
KIWAY_PLAYER::ShowModal() is in the vtable and so is cross module capable.
*) Remove the requirements and assumptions that the wxFrame hierarchy always
had PCB_EDIT_FRAME and SCH_EDIT_FRAME as immediate parents of their viewers
and editors. This is no longer the case, nor required.
*) Use KIWAY::Player() everywhere to make KIWAY_PLAYERs, this registers the
KIWAY_PLAYER within the KIWAY and makes it very easy to find an open frame
quickly. It also gives control to the KIWAY as to frame hierarchical
relationships.
*) Change single_top to use the KIWAY for loading a KIFACE and instantiating
the single KIWAY_PLAYER, see bullet immediately above.
*) Add KIWAY::OnKiwayEnd() and call it from PGM_BASE at program termination, this
gives the KIFACEs a chance to save their final configuration dope to disk.
*) Add dedicated FRAME_T's for the modal frames, so m_Ident can be tested and
these modal frames are distinctly different than their non-modal equivalents.
KIWAY_PLAYER::IsModal() is !not! a valid test during the wxFrame's constructor,
so this is another important reason for having a dedicated FRAME_T for each
modal wxFrame.
On balance, more lines were deleted than were added to achieve all this.
Eeschema, Pcbnew, and Cvpcb all run under the same process now,
FOR THE VERY FIRST TIME!
*) Added KIWAY::PlayerCreate(), PlayerClose(), and PlayersClose().
*) Factored FRAME_T into <frame_type.h> from ID_DRAWFRAME_TYPE.
*) Found that the following command line is helpful for collecting all the *.kiface
files into the <build>/kicad/ directory so that kicad can find them.
$ cp `find . -name '*.kiface'` kicad/
Maybe somebody will want to rework how the CMake files are organized so all
the binaries can go into the same place. See python-a-mingw-us.
*) This might fix the problem on the Mac where child process windows were not
coming to the front. See ->Raise() in kicad/mainframe.cpp.
*) You can set USE_KIFACE to 0 in kicad/mainframe.cpp to chain load child exes
instead of using the KIFACE modules directly, i.e. revert.
if it is running under single_top.cpp or under a project manager.
*) Test Kiface().IsSingle() when adding menus, some operations are not permitted
when running under a project manager and the KIWAY_PLAYER is pegged to a
specific project.
*) Implemented KIWAY::KiFACE() so it loads *.kiface files. They still have to be
in the same directory as the main *.exe launcher, so this presents some difficulty
when the binaries are not yet installed but rather the *.kiface files are still
in their original build directories. For today, I simply copied _pcbnew.kiface
to build/kicad/.
*) Add a test case to kicad/mainframe.cpp just to get an early peek at loading
_pcbnew.kiface under the C++ project manager. Got that working for one
specific invocation just for proof of concept. Surprise, it works.
was used locally. Then comment it out in favor of a newer strategy for
filling in nicknames in cvpcb.
Add MODULE* FootprintLoadWithOptionalNickname( const FPID& aFootprintId )
throw( IO_ERROR, PARSE_ERROR );
from code found elsewhere.
In PATCH_COMMAND, use patch instead of bzr patch if patch or patch.exe is found (mandatory to use msys2 because bzr patch does not work when using msys2)
! The initial testing of this commit should be done using a Debug build so that
all the wxASSERT()s are enabled. Also, be sure and keep enabled the
USE_KIWAY_DLLs option. The tree won't likely build without it. Turning it
off is senseless anyways. If you want stable code, go back to a prior version,
the one tagged with "stable".
* Relocate all functionality out of the wxApp derivative into more finely
targeted purposes:
a) DLL/DSO specific
b) PROJECT specific
c) EXE or process specific
d) configuration file specific data
e) configuration file manipulations functions.
All of this functionality was blended into an extremely large wxApp derivative
and that was incompatible with the desire to support multiple concurrently
loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects.
An amazing amount of organization come from simply sorting each bit of
functionality into the proper box.
* Switch to wxConfigBase from wxConfig everywhere except instantiation.
* Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD,
PGM_SINGLE_TOP,
* Remove "Return" prefix on many function names.
* Remove obvious comments from CMakeLists.txt files, and from else() and endif()s.
* Fix building boost for use in a DSO on linux.
* Remove some of the assumptions in the CMakeLists.txt files that windows had
to be the host platform when building windows binaries.
* Reduce the number of wxStrings being constructed at program load time via
static construction.
* Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that
these functions are useful even when the wxConfigBase comes from another
source, as is the case in the KICAD_MANAGER_FRAME.
* Move the setting of the KIPRJMOD environment variable into class PROJECT,
so that it can be moved into a project variable soon, and out of FP_LIB_TABLE.
* Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all
its child wxFrames and wxDialogs now have a Kiway() member function which
returns a KIWAY& that that window tree branch is in support of. This is like
wxWindows DNA in that child windows get this member with proper value at time
of construction.
* Anticipate some of the needs for milestones B) and C) and make code
adjustments now in an effort to reduce work in those milestones.
* No testing has been done for python scripting, since milestone C) has that
being largely reworked and re-thought-out.
Mingw, all: remove static link of libgcc, which can create issues when using dll version of wxWidgets.
Therefore libgcc_s_dw2-1.dll should be in the paths for executables.
Page layout editor: Add bitmap items to the page layout existing items.
Now a bitmap image can be added to a page layout description. Currently the bitmap is expected having a 300 ppi definition.
Note: not all plotters can plot a bitmap, and in this case the bounding box is plotted instead of the bitmap
Remove KICAD_GOST option because it is now useless: the 2 GOST options are now selectable at run time and are:
* specific page layouts (now user definable, and the GOST page layouts are available in template folder)
* notation for multiple parts per package (made in eeschema, preference menu)
*) add hotkey for setting the grid origin as 'S', in board editor, module editor.
*) re-position the function interface for cursor movement from BASE_SCREEN into
class EDA_DRAW_FRAME. This is a prelude to getting rid of BASE_SCREEN or
splitting it up.
jean-pierre charras
Simon Wells
Simon Richter
Chris Pavlina
Simon Wells
Wayne Stambaugh
Baranovskiy Konstantin
Maciej Suminski
unknown
Bernhard Stegmaier
Mark Roszko
Dick Hollenbeck
Lorenzo Marcantonio
Marco Serantoni
Camille Delbegue