Unselecting performs two functions: unselecting and unhighlighting.
Some items may be deselected but still live in the temporary highlighted
layer (e.g. selecting a footprint and exchanging it). Since there is no
harm in unselecting an unselected item, we can allow it to proceed
without the check.
Deselecting each individually had the side-effect of possibly re-drawing
the view in between actions, leading to visible artifacts in the router
(where invisible items are set visible before committing a change)
Nets dialog (Inspect->List Nets) contains list control
that has very small width for first and last columns.
Changed algorithm for calculating optimal values for
column width.
We only need to test zone connections once, so we skip the double-check
from the nested loop unless we are only checking a single zone. Then
the second loop needs to iterate over the full list of zones.
Commit efdbc91e42 broken the primary
alignment mechanism for maintaining the current point as an auxilliary
grid reference. This reverts that commit and fixes both the initial
issue and the associated bug by applying the primary constraint after
the secondary. In this way, we consider the secondary constraint as an
additive rather than alternative constraint.
Fixes: lp:1793888
* https://bugs.launchpad.net/kicad/+bug/1793888
Change "OK" to "Export" so user is not surprised by the fact that the
dialog does not close after the step file is created..
Fixes lp:1784260
https://bugs.launchpad.net/kicad/+bug/1784260
It can be used instead of the slot (G85) command to create oval holes.
Do not yet activate it.
Oval holes frequently create issues with board houses.
Using a more usual routing (G01) command could solve some issues.
When editing the pcb, Ctrl-Click will highlight a net. This allows
de-highlight with the ESC/cancel action from the selection tool. Inside
the highlight tool, ESC reverts to the selection tool while keeping the
net highlighted.
Fixes: lp:1793842
* https://bugs.launchpad.net/kicad/+bug/1793842
Clang++ seems to be in left-field here as it processes a stringstream
1.0X1.0 >> double as a hexadecimal floating point ('X' character) and
throws an error rather than converting 1.0 and stopping when it reaches
a non-numeric character. This causes errors when exporting step on Mac,
which uses clang++ by default.
Adding spaces to the string is more explicit and doesn't break gcc. It
will be sufficient until we get rid of kicad2step as an external
utility.
Fixes: lp:1778564
* https://bugs.launchpad.net/kicad/+bug/1778564
(cherry picked from commit e7a9643b37)
The lock file code would reset the lock file every other time the same
board file was opened in Pcbnew in the stand alone mode. This created
the perfect toggle switch causing the board to be reloaded every other
time the same board was selected.
Please note that wxSingleInstanceChecker is broken on Linux and most
likely MacOS as well due to a bug in wxWidgets. On these platforms,
the already opened file is reopened rather than displaying a warning
that the file is already opened.
Fixes lp:1777599
https://bugs.launchpad.net/kicad/+bug/1777599
This is a boyscouting commit to standardize the threading of zone fills.
We do not need to join threads after their completion, instead we simply
allow them to clean up their memory without blocking the user. This
also sets the maximum number of threads that may be created to the
number of zones being filled. More than this will only leave un-used
threads being created and immediately killed.
We also include the connectivity search as a phase in the fill progress
reporter. This was the case before but did not utilize the correct
maxsize, leading to stalled progress bar.
This commit finishes the removal of OpenMP from the KiCad codebase.
Removed in this commit are the OpenMP calls in 3d-viewer and
qa/polygon_triangulation as well as all references in CMakeLists.txt
std::thread is used instead for multithreaded computation
OpenMP is not available for macos, so moving to a std::threads
implementation brings platforms into shared code.
This also reduces the OpenMP overhead when computing connectivity and
ratsnests.
Fixes: lp:1780130
* https://bugs.launchpad.net/kicad/+bug/1780130
The CMake scripts calculate the install path for python scripts by
distutils.sysconfig.get_python_lib(
plat_specific=0,
standard_lib=0,
prefix=''
)
which generates a string in line with
lib/python2.7/site-packages
This string ends up in the CMake variable PYTHON_DEST and is used by the
install step as destination directory for pcbnew.py.
There has been a hard-coded assumption on the content of that string in
PcbNew which is not compatible with FreeBSD 11.1.
This commit eliminates the hard-coded assumption in PcbNew and reuses
the install path as known by CMake.
Fixes: lp:1777921
* https://bugs.launchpad.net/kicad/+bug/1777921
(cherry picked from commit dd3c24faf8)
Repeating find with the same search string would result in a not found
error for absolute search strings. Don't clear the found item if the
search string did not change from the previous search..
Fix another minor bug where the do not warp mouse pointer option was
always checked when the find dialog was called from one of the gal
canvases.
Fixes lp:1793300
https://bugs.launchpad.net/kicad/+bug/1793300
We like to allow items that are marked SELECTED to remain so during
editing but this does not indicate that there are multiple edits queued,
so do not prevent pushing this into the undo queue.
When designing pads, it can be helpful to not only see the resulting
rounded rectangle radius from a given percentage but also to set it,
constraining the related percentage. This adjusts the dialog to allow
editing the rounded rectangle corner radius. It does not change the
file format as the resulting ratio is saved. Further updates of the pad
size or ratio will modify the radius.
Fixes: lp:1668020
* https://bugs.launchpad.net/kicad/+bug/1668020
Zones can be explicitly merged even if they do not have the same
parameters. Automatic merging should only occur when all of the zone
parameters are exactly identical to allow for area-specific zone
parameters.
( cherry-picked from 3d0915a33 )
Fixes: lp:1695761
* https://bugs.launchpad.net/kicad/+bug/1695761
Keepout zones can have different layer sets and different restrictions
that should not be combined unless they are identical.
( cherry-picked from a67bfa620 )
Fixes: lp:1789062
* https://bugs.launchpad.net/kicad/+bug/1789062
We had been deselecting items after calling edits to be safe in case the
item was deleted/exchanged by the edit. The item pointer itself remains
valid even when deleting as it is assigned to the undo stack. But it
should not remain visible or selected on the schematic if it is removed.
This tests for removed items by checking whether it (in the case of
first-level BOARD_ITEMS) or its parent (in the case of footprint item
components) remain in the view list after editing. If they are still in
the view list, then we re-select them.
( cherry-picked from 2c6d0ffe2 )
Fixes: lp:1765774
* https://bugs.launchpad.net/kicad/+bug/1765774
Fixes: lp:1775946
* https://bugs.launchpad.net/kicad/+bug/1775946
Snapping while dragging depends on the current net being assigned during
dragging. This initializes the placer to hold the current net while
performing inline dragging. The placer is reset along with the dragger
in StopRouting(). This fixes the difference in snap between drag and
create new route.
( cherry-picked from 219695953 )
Allow corner adding to polygons in both module editor and board editor.
The board editor was already allowed but only through special types.
The module editor is now sychronized to the same process and both
recognize standard context menus
Fixes: lp:1782966
* https://bugs.launchpad.net/kicad/+bug/1782966
( cherry-picked from 06ac172c2 )
When constraining moves, the cursor snaps to grid but does not
represent the position of the final edited point. The point is rotated
to the nearest snap angle, while the vector length remains unchanged
resulting in a line longer than intended and off-grid.
This adds a grid-snap after the constraint is applied.
Fixes: lp:1792655
* https://bugs.launchpad.net/kicad/+bug/1792655
( cherry-picked from e7c51a6a6 )
Triangulation of zones can be time consuming for large boards. This
adds a std::thread implementation of parallel zone loading to speed this
process on multi-core machines.
Add Display Settings to Footprint Browser.
Make each of them OpenGL on OSX and Cairo on other platforms.
Allow auto-zoom to be turned off and save last zoom setting.
Make ordering of tools in htoolbar consistent.
Standardize grid and zoom drop-downs.
Fixes: lp:1791667
* https://bugs.launchpad.net/kicad/+bug/1791667
Unplated holes in Ealge can either be free floating or part of a larger
footprint. We handle both in the same packageHole routine by either
offsetting the hole in a centered footprint or offsetting the footprint
in a centered hole.
Fixes: lp:1791287
* https://bugs.launchpad.net/kicad/+bug/1791287
Invalid graphical items that cannot be created in pcbnew may still be
created by external tools. This synchronizes the pcbnew view display
with the gerber output and 3d viewer line widths for these types of
lines. Only filled polygons are permitted 0-width lines.
Fixes: lp:1790534
* https://bugs.launchpad.net/kicad/+bug/1790534
Normally working at a zoom level when a footprint is not fully displayed
indicates that the user modifies other components. Selection Tool used
to discard footprints that had area larger than the viewport area, but
it may make sense to select them if there are no other candidates.
Fixes: lp:1789578
* https://bugs.launchpad.net/kicad/+bug/1789578
This allows full copper connections even when THT changes a trace layer.
It avoides selecting the actual pad to prevent actions on the copper
connections from affecting the footprints as well.
Fixes: lp:1789807
* https://bugs.launchpad.net/kicad/+bug/1789807
Jeff Young
jean-pierre charras
Seth Hillbrand
Wayne Stambaugh
Baranovskiy Konstantin
Tomasz Włostowski
Martin Aberg
qu1ck
Maciej Suminski
Franck78
Thomas Pointhuber