c1510f07d8
Fix some issues with group bounding boxes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12958
2022-11-20 23:57:36 +00:00
03ba14c6d3
Tighten lifecycle management of parent group pointers.
...
Also adds some debugging to try to catch dangling pointers.
Also adds a cache for group bounding boxes (which will be expensive
to calculate for large groups).
Fixes https://gitlab.com/kicad/code/kicad/issues/12875
2022-11-11 17:27:28 +00:00
25f06eed8c
Move zone borders back to their "host" layer.
...
Zone borders shouldn't be affected by zone-opacity control; we always
draw them in full layer opacity.
Fixes https://gitlab.com/kicad/code/kicad/issues/12438
2022-11-05 16:50:54 +00:00
e33c611488
Replace collision calls with ones that work.
...
I'm not sure why the old calls didn't work, but they reported "no
collision" between two overlapping zones.
2022-11-03 17:19:59 +00:00
1f4e51b008
Be careful of interveneing priority zones when doing divot prevention.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12797
2022-11-01 23:33:44 +00:00
ce2dbdec75
Formatting and a bit of cleanup.
2022-10-21 18:41:39 +01:00
d16b23d16e
Name shortening and line-break reduction.
2022-10-21 18:41:39 +01:00
04fec5016b
Add keepout zones set to keepout footprints to footprint courtyard checker.
...
(This is for the move tool, not DRC. DRC uses more sophisticated keepout
processing which is too slow for the move tool, and doesn't let us know which
keepout area collided for collision highlighting.)
Fixes https://gitlab.com/kicad/code/kicad/issues/12594
2022-10-07 22:23:37 +01:00
97d4df4154
Better thread safety for zone boundingbox caches.
2022-10-02 19:30:43 +01:00
e49de68a59
Implement a more durable zone bounding box caching strategy.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10821
2022-10-01 22:10:43 +01:00
897135a4f0
Support mirroring on the board too.
...
Also fixes a few bugs in FP item mirroring.
Fixes https://gitlab.com/kicad/code/kicad/issues/2168
2022-09-22 15:05:58 +01:00
1b962a1660
Expand zone info a little
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12479
2022-09-20 22:16:50 -04:00
0295090135
Zone Fill performance for overlapping zones
...
When multiple zones overlap each other, we need to synchronize the
filling. This should not wait for all zones to try to fill before
restarting. Instead, zones that cannot be filled because the depend on
another zone finishing are immediately re-inserted into the fill queue.
2022-09-19 10:11:06 -07:00
64a6fc0fd4
Push UNITS_PROVIDER down into a low-level mixin.
...
This allows us to also construct cheap UNIT_PROVIDERs for specific
tasks when necessary.
2022-09-19 17:10:59 +01:00
45d6b4a9fc
Readability improvements.
2022-09-19 11:18:20 +01:00
a8613ee80f
Combine Iu2Millimeter & remove PcbMm2iu
2022-09-16 21:09:26 -04:00
90bc5c19cf
Performance enhancement for zone filling.
2022-09-16 19:16:15 +01:00
b00178adb3
Nuke base_units from orbit
2022-09-16 04:38:10 +00:00
f17a865593
Move EDA_ITEM hitTest to BOX2I.
2022-08-31 17:18:45 +01:00
2dc6300501
Move EDA_ITEM bounding boxes to BOX2I.
2022-08-31 10:16:55 +01:00
5679b9dbdc
Remove a few EDA_RECT instances.
2022-08-31 01:22:49 +01:00
ee95224517
Ensure that teardrops always get filled first
...
Teardrops are, by definition, higher priority than standard zones, so
ensure that they cannot be overriden
2022-08-25 08:54:34 -07:00
af71d42307
Renamed PROPERTY_TYPE enum names to avoid a conflict on MSYS2
2022-08-22 21:32:32 -04:00
95fd58b25a
Properties meta-data for pcbnew classes
2022-08-22 21:32:00 -04:00
a9536b5de9
CHANGED netclass assignments now done via canvas or via patterns.
2022-08-14 22:56:29 +01:00
9fbf9973be
Remove obsolete IsKeepout and KeepoutAll functions
...
These are superceded by IsRuleArea and the individual keepouts
2022-08-01 08:05:09 -07:00
f41af10007
Clean up hole shapes for safety (smart pointer) and consistency.
2022-07-22 23:06:07 +01:00
b727bfc16d
Performance: avoid sqrt at all costs.
2022-07-16 18:42:32 +01:00
3081023b5e
ADDED: Minimum copper connection width DRC check
...
Checks all copper connections in each net/layer for minimum width
setting.
Fixes https://gitlab.com/kicad/code/kicad/issues/9870
2022-07-11 19:26:56 +00:00
af6ba1a16e
Fix typos in pcbnew sub-directory
...
Found via `codespell -q 3 -S *.po,./thirdparty,./Documentation/changelogs -L aactual,acount,aline,alocation,alog,anormal,anumber,aother,apoints,aparent,aray,ba,busses,dout,einstance,leaded,modul,ontext,ot,overide,serie,te,,tesselate,tesselator,tht`
2022-06-30 09:39:45 -04:00
82ebc247b8
More performance enhancements for DRC.
2022-06-18 19:47:11 +01:00
155620cc9a
Move H/V/45 mode from zone properties to toolbar.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8587
2022-05-29 21:30:15 +01:00
dbee441328
We've probably smoked out enough of the GetLayer() issues.
...
... and GetProperty() can query GetLayer() in user scripts.
2022-04-14 17:09:27 +01:00
cf611f1742
Better safety around layersets.
2022-03-21 18:19:00 +00:00
442aae19d9
Separate flashing check for connectivity
...
When building the connectivity database, we should not be using the
connectivity to check for shapes.
To make this deterministic, we introduce two flags (ALWAYS_FLASH and
NEVER_FLASH) that are used with connectivity building to determine
whether a pad is flashed for connectivity or not. ZONE <-> PAD/VIA
connectivity will be checked with ALWAYS_FLASHED and all other
connectivity will be checked with NEVER_FLASHED if they are marked for
potential annular ring removal. If they are not marked for removal,
they will be checked ALWAYS_FLASHED.
Fixes https://gitlab.com/kicad/code/kicad/issues/11114
2022-03-16 17:30:01 -07:00
65185f53a1
Rotate fp zones before comparing with library versions.
...
Also includes some performance fixes to not copy around triangulation
data when it's not needed.
Fixes https://gitlab.com/kicad/code/kicad/issues/10143
2022-03-14 15:53:24 +00:00
878c70c1ab
Pcbnew: fix erroneous IslandRemovalMode default mode in board files.
...
The default is ISLAND_REMOVAL_MODE::ALWAYS in *.kicad_pcb files
2022-03-09 13:17:18 +01:00
e4b56ab7f1
Performance fixes for the board from hell....
2022-03-08 23:54:34 +00:00
878c4d2f6b
Must clear arcs before calling Clipper.
2022-03-05 18:59:53 +00:00
3bb1fd8311
Teardrops: fixes and enhancements:
...
- do not allow smoothing outlines: outlines are already optimized.
- do not allow settings incompatible with teardrop area (grid, thermal relief)
- DIALOG_COPPER_ZONE: export zone settings to similar zones only.
Fixes #11040
https://gitlab.com/kicad/code/kicad/issues/11040
2022-03-05 17:18:42 +01:00
8218f9ab44
Finally found the intermittant QA crash
...
When loading footprints/zones in parallel, we cannot reference a static
vector that gets cleared by other threads.
It is unclear why this element was ever static to begin with (premature
optimization?) but it has been this way for a long time. We never
noticed until we threaded load cycles, which gave the hatch a chance to
override itself and cause crashes
Fixes https://gitlab.com/kicad/code/kicad/issues/9888
2022-03-04 11:37:49 -08:00
006e1be69c
ZONE: display number of vertices on the info panel (regression fix)
...
This is a useful info because the calculation time depend on this number.
2022-03-04 10:42:32 +01:00
843a56c4e4
Implement two-staged zone priority: assigned priority followed by UUID.
2022-03-01 14:53:35 +00:00
e6c617b74d
Respect ERROR_OUTSIDE when inflating polygons.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10896
2022-02-21 15:19:46 +00:00
5efa354f0f
Add asserts to flush out incorrect uses of GetLayer().
2022-02-18 12:14:38 +00:00
8f670552a6
Allow Rule Areas on all physical layers.
...
Required to do things like modify silk_clearance rules.
2022-02-17 23:59:09 +00:00
327ddad79f
Performance: get rid of rawPolys / finalPolys distinction.
...
(The final fractured polys are required, and we don't really ever use
the raw polys anyway, so they were removed.)
2022-02-16 15:33:12 +00:00
2172810600
Performance: better sharing of zone fills.
2022-02-15 19:19:03 +00:00
d553d620c1
DIALOG_COPPER_ZONE: add option to set the pitch of hatches around the zone outlines
...
This parameter exists since the beginning, but never show in this dialog
2022-02-12 18:57:02 +01:00
300ee022fa
Drop unsupported fills. No reason to keep them around.
...
Also removes the long-dead segment fill data structures.
2022-02-11 22:09:22 +00:00
3deaf902bb
Retire the V5 zone fill algorithm.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10578
2022-02-11 13:10:52 +00:00
7ccac79192
More wxString wide literals.
2022-02-05 21:29:34 +00:00
4eac8d7c66
Remove unit-less angles from geometry lib APIs.
2022-01-20 21:10:04 +00:00
8c758aeeb5
Use superclass's copy c'tor from within subclass copy c'tor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10481
2022-01-18 18:40:55 +00:00
e61144d45a
Finish with EDA_ANGLE.
2022-01-16 21:15:40 +00:00
07013d00e1
More EDA_ANGLE.
2022-01-14 16:08:19 +00:00
c9487bad18
Move BOARD_ITEM::Rotate() to EDA_ANGLE.
2022-01-14 16:08:19 +00:00
fcfe42d67c
Continue the war on wxPoint
2022-01-10 19:52:26 -05:00
cfe93e34a2
PCB_BASE_FRAME::FocusOnItem(): avoid extremely long calculation time for zones.
...
The algo used to calculate a focus point on a zone can be *extremely* time
consuming when using the filled areas in zone (can be matter of minutes and more).
So we use now only the zone outlines usually having not a lot of vertices.
2022-01-10 18:14:19 +01:00
9c29cc945c
prepare teardrops, round 2
2022-01-08 16:56:41 +01:00
7d671cff1e
Scoop up some more wxPoints
2022-01-01 21:06:40 -05:00
c4c56de708
Neurotically update position wxPoint usages
2022-01-01 11:55:51 -05:00
ed79f6e511
Clean up some TODOs.
2021-12-24 21:10:28 +00:00
32721755bf
Hook up zone-pad connections to custom rules.
...
ADDED zone_connection constraint.
ADDED thermal_relief_gap and thermal_spoke_width constraints.
ADDED angle override for thermal relief spokes in Pad Properties.
Fixes https://gitlab.com/kicad/code/kicad/issues/4067
2021-12-23 22:30:26 +00:00
e26341d424
Cleanup.
2021-12-23 20:36:18 +00:00
22ba640c2b
Remove locking from footprint editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9496
2021-10-31 16:33:03 +00:00
1f7fd436a2
Move board object polygon code into the object source files.
...
Having the board object polygon code all defined in a separate file made
finding the polygon code for an object difficult to find.
2021-10-25 17:42:11 -04:00
95ec23247c
Initialize zone vars in CTOR
2021-10-13 08:59:48 -07:00
1a252b4f96
Add a compile error for ill-defined rules, and more performance.
...
Also adds const-safety to GetBoard().
2021-08-16 12:14:17 +01:00
69322a18e7
Fix missing call to ClearArcs()
2021-08-09 09:16:04 +02:00
2d9b06cbf9
Fix missing flatten step when filling zones with arcs
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8923
2021-08-08 15:09:12 -04:00
6aaf4413b3
Fix kicad_string.h / string.cpp mismatch.
...
They don't define a KiCad string class, so the header file name was
somewhat misleading. But the fact that they didn't match definitely
made coding more difficult.
2021-07-29 16:03:25 +01:00
46338403e7
Unwrap some std::library typedefs.
2021-07-28 22:16:38 +01:00
cf00319c85
More NULL expunging.
2021-07-20 07:27:18 -04:00
24e54178db
Make sure pin hittest regions don't get too hard to hit.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8616
2021-07-01 15:43:19 +01:00
78d2e88f4b
Beautify export STEP dialog.
2021-07-01 15:43:19 +01:00
3644224cb6
Build smoothed area at outline
...
The clearance to board edge will be set by the knockout routine.
Clipping twice can leave small imperfections in the edge that need to
get triangulated
2021-06-11 14:26:38 -07:00
10e60acf34
Clean up including of board_design_settings.h
2021-06-06 15:03:42 -04:00
f6d6b7d263
Harmonize property names for zone/footprint/pad clearance and thermals
...
Use "override" instead of "local" for better clarity.
2021-05-29 14:12:23 -04:00
3b049b32cf
Show if pads, zones, and dimensions are locked in the status bar.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8255
2021-04-21 19:58:18 +01:00
a9eb83201e
Remove ZONE::ClearFilledPolysList() and fix ZONE::Unfill()
...
ClearFilledPolysList is redundant and Unfill() was missing the clearing
of m_insulatedIslands
This fixes potential latent bugs in zone unfilling.
2021-03-21 20:13:20 +00:00
18037e2f65
Rework bitmap system to load from archived PNGs
...
Bitmaps are now identified by an enum class instead of by pointers.
Bitmap loading and caching is now handled by a class in common, and
we no longer compile most bitmaps into the binary, so there is no
longer a bitmaps static library.
Instead, bitmaps are archived to a .tar.gz file which is installed
in ${KICAD_DATA}/resources/images.tar.gz
The source PNGs are checked in to Git as the original CPP files were,
so that people can build without the required dependencies to convert
SVGs to PNGs.
Initial support is also added for dark theme icons, although this
is not yet exposed in the GUI.
Stubs are present for multi-resolution image resources, but this is
not fully-baked yet and could use some refinement.
2021-03-11 08:37:35 -05:00
d160b30ff1
Pcbnew: add keepout helper methods to ZONE object.
2021-03-09 08:13:06 -05:00
2bc10d58b5
Fix some cases where PCB_FP_ZONE_T was left out.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7615
2021-03-08 13:00:46 +00:00
6272b48481
Make sure layer gets passed in to rules evaluation.
2021-02-08 14:53:49 +00:00
e26c912b86
Don't apply electrical clearance to non-copper zones.
...
Also removes a very old (and somewhat confusing) comment.
Fixes https://gitlab.com/kicad/code/kicad/issues/7404
2021-02-03 11:56:43 +00:00
1a3ab551cf
Cleanup
...
FindLineSegmentIntersection() was refactored in 2012 but there are a few
uses that didn't get updated. This finalizes the cleanup
Fixes https://gitlab.com/kicad/code/kicad/issues/7365
2021-01-31 15:55:52 -08:00
d8c7c8f700
Evaluate rules when fetching zone edge clearance.
2021-01-23 17:04:44 +00:00
ac94d72d2d
Add more const specifiers
2021-01-12 20:51:31 +00:00
d13de9c6c1
Zones: layer set must be initialized after m_isRuleArea
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6814
2020-12-24 11:29:23 -05:00
c66e373119
Cleanup of PCBNew message panel routines.
...
Also fixes bugs where invalid netclasses were reported as "Default",
and SMD pads were reported as having "0.0000" drills.
2020-11-30 14:38:06 +00:00
6f3b0c452f
Make sure unfilled zones get an MD5 hash.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6515
2020-11-26 20:21:46 +00:00
0517f783e1
Ease i18n of zone descriptions.
2020-11-19 22:48:18 +00:00
203c860f01
Ensure better smoothing for zones clipped by board edges.
2020-11-19 18:34:30 +00:00
c1d1c12b41
Simplify message panel code.
...
We've had the colours turned off for two releases now without any
screaming or gnashing of teeth, so it's time to clean up the code.
2020-11-18 17:32:40 +00:00
16e3e59495
Split out arrayDim and MIRROR templates from macros.h
...
These were not macros
2020-11-17 20:21:04 -05:00
7bd31d5237
Naming conventions.
2020-11-14 18:26:03 +00:00
8bae52d1c3
Correct naming conventions.
2020-11-14 14:29:11 +00:00
f5443de7f9
D_PAD -> PAD.
2020-11-13 15:16:24 +00:00
84dd5108ba
Remove some "class_" prefixes from files.
2020-11-13 15:16:23 +00:00
Jeff Young
Marek Roszko
Seth Hillbrand
Maciej Suminski
luz paz
jean-pierre charras
Wayne Stambaugh
Jon Evans
Roberto Fernandez Bautista
Dominik Wernberger