Jon Evans
bd14f8a82a
ADDED: New appearance control widget for PcbNew
...
Featuring:
- Layer view presets
- Per-type opacity for tracks, vias, pads, zones
- Net and netclass color and visibility controls
CHANGED: Simplified object visibilty controls
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1951
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1981
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2003
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2173
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2254
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4325
2020-08-15 15:24:28 -04:00
Jeff Young
393bb0fd83
Fix assert where geometry routine wasn't ready to handle layers.
...
This introduces layer handling to a lot of the geometry routines.
Many of them don't do much with it now, but it does help multi-layer
zones and will help when padstacks are implemented.
2020-08-12 22:20:08 +01:00
Jeff Young
463100d67f
Remove a long-standing hack to keep divots out of adjacent zones.
...
The new algorithm unions any adjacent zones before doing the
chamfer/fillet and then subtracts the other zones back out afterwards.
Fixes https://gitlab.com/kicad/code/kicad/issues/3812
2020-08-12 22:20:08 +01:00
Jeff Young
4317881012
Improve delete-unused-layers to better handle multi-layer items.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5116
2020-08-09 15:39:51 +01:00
Jeff Young
e5b50d90a7
Update DRC rules to new layer and disallow grammars.
...
Also adds support for hooking rules up to named zones.
Fixes https://gitlab.com/kicad/code/kicad/issues/2041
2020-08-07 21:49:36 +01:00
Jeff Young
00e77d1ba4
Implement pad & via aprons for hatched zones.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2519
2020-08-07 15:15:43 +01:00
Seth Hillbrand
8a0be64ad4
Ensure dangling test takes track width into account
...
When running a hit test to check if the anchors are connected, we should
loosen the check for tracks to account for the width. Otherwise
connected anchors can be connected in the system but test positive for
IsDangling()
Fixes https://gitlab.com/kicad/code/kicad/issues/5027
2020-08-05 13:17:29 -07:00
Jeff Young
be957e0105
Convert parent-less module items to board items on paste.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4938
2020-07-27 19:53:42 +01:00
Jeff Young
f97c50bfde
Give excluded DRC items their own layer.
...
(And fix a bug with the new mulit-layer zones and rule-based keepouts
at the same time which prevented me from testing it.)
Fixes https://gitlab.com/kicad/code/kicad/issues/4954
2020-07-24 01:28:25 +01:00
Maciej Suminski
89698a727b
Removed const modifier for returned non-reference types
2020-07-05 22:44:38 +02:00
Jon Evans
f8bfb2bc16
Fix several issues with multilayer zones
...
- Properly refill if layer set is modified
- Fix some threading issues with island removal
- Fix copy constructor
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4765
2020-07-01 20:51:44 -04:00
Jon Evans
1d5e4f86af
ADDED: Copper zone island removal is now configurable
...
ADDED: Zones and keepouts can now be named (for DRC)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4392
2020-06-28 09:09:38 -04:00
Jon Evans
0d4ee39f75
CHANGED: Copper zones can be on more than one layer
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1963
2020-06-28 08:52:37 -04:00
Jon Evans
0b34cea3d5
Add an optional name property to zones
2020-06-28 08:51:57 -04:00
Jeff Young
39ec63c4e9
Fix some inconsistencies in clearance priorities.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4555
2020-05-29 13:41:45 +01:00
Jeff Young
1db799d841
Implement "disallow" rules and integrate with keepout settings.
2020-05-25 22:51:47 +01:00
Jeff Young
cec857c0f4
Complete hookup of zone filler to new clearance engine.
2020-05-18 19:20:46 +01:00
Jeff Young
d3f017d825
DRC rules parser and engine.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2182
Fixes https://gitlab.com/kicad/code/kicad/issues/2116
Fixes https://gitlab.com/kicad/code/kicad/issues/1958
Fixes https://gitlab.com/kicad/code/kicad/issues/1965
2020-05-16 15:53:05 +01:00
Jeff Young
0f8c7ffd11
Add pad keepout and footprint keepout areas.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2365
2020-05-07 17:51:27 +01:00
Jeff Young
f7e518dbc6
Add clearance sources to some DRC violation reports.
2020-05-01 18:49:42 +01:00
Jeff Young
1535c83b88
Lay some groundwork for adding distances to DRC errors.
...
modified: eeschema/lib_rectangle.cpp
2020-04-24 14:46:22 +01:00
Michael Kavanagh
e4cbeeab4c
Remove dead code in pcbnew
...
* Remove dead zone printer
* Remove old canvas in pad properties window
2020-04-22 21:50:15 +00:00
Jeff Young
7f1b409305
Remove dead legacy print code.
2020-04-20 17:03:38 +01:00
Ian McInerney
37a4dd927b
Allow deletion of zone cutout areas
...
ADDED: Ability to delete zone cutout areas
Fixes https://gitlab.com/kicad/code/kicad/issues/4188
2020-04-14 17:57:47 +01:00
Ian McInerney
6b8d81e95d
Add zone area to message panel
...
ADDED: Area of zone fill is displayed in the message panel
Fixes https://gitlab.com/kicad/code/kicad/issues/2412
2020-02-05 09:44:53 +00:00
Seth Hillbrand
7c28c3838a
Comment-only changes
...
Makes class comments conform to coding standards
2020-01-10 16:43:01 -08:00
Mark Roszko
19ceb11ae7
Change more enums over to scoped enums
2019-12-28 00:55:11 +00:00
Mark Roszko
11ff16be4e
Switch to scoped enums
2019-12-20 14:11:39 +00:00
Seth Hillbrand
c4d853c1e8
SHAPE_LINE_CHAIN: Remove element access
...
This is the first step to allowing non-segments in the line chain.
External routines cannot be allowed to change the line chain without
going through the internal routines. To accomplish this, we remove the
Vertex() and Point() access routines and only leave the const versions.
Transformations are given for both points as well as the chain itself.
2019-12-12 13:54:48 +00:00
jean-pierre charras
04bae776a7
Keepout in footprints: fix issues related to netclass management. Keepout do not actually use netclasses, but the netclass info must be valid. Especially when editing a fp in the fp editor, the netclass info is related to the dummy board managed by the fp editor. But when saved to the board editor the netclass info must be related to the main board
2019-10-29 11:24:57 +01:00
jean-pierre charras
1c2891e6d4
Fp editor: allow internal layers in footprint keep-out zones Especially: Enable one internal layer to manage keep-out areas only on internal layers Allowing one internal layer is a trick to manage these keep-out areas (visibility and selection) In fact this internal layer groups all internal layers enabled is these keep-out areas.
2019-10-29 11:24:57 +01:00
jean-pierre charras
bc5dcf182f
keepout in footprint: fix some crashes and issues. Create a specific type (PCB_MODULE_ZONE_AREA_T) for zones in footprint. The new class (MODULE_ZONE_CONTAINER) is the same as ZONE_CONTAINER, but the type ID is PCB_MODULE_ZONE_AREA_T instead of PCB_ZONE_AREA_T.
...
This is mandatory because these zones must be handled differently in many functions.
2019-10-29 11:24:57 +01:00
Ross Schlaikjer
64a42ffa35
Add keepout in footprints: Starting point.
2019-10-29 11:24:30 +01:00
Jeff Young
8334cb9a1c
Don't attempt colinear corner optimization when zones of different nets overlap.
...
Fixes: lp:1838197
* https://bugs.launchpad.net/kicad/+bug/1838197
2019-07-28 10:32:15 -06:00
jean-pierre charras
dd702cd53d
Remove pads not on copper layers (just on tech layers) from connectivity calculation.
...
Pads not on copper layers now do not have a netname, and are no longer taken in account in connectivity.
Especially it avoid creating useless rats-nests for these pads.
2019-07-25 13:08:41 +02:00
Jeff Young
928d6c5dff
Implement preserved-corners to prevent divots when filling adjacent zones.
...
Fixes: lp:1460787
* https://bugs.launchpad.net/kicad/+bug/1460787
2019-07-14 18:18:48 +01:00
Jeff Young
1a7cef2950
Improve performance, commenting and API of some polygon classes.
2019-07-14 10:39:38 +01:00
Jeff Young
37af3adffb
Add preference for flip axis.
...
Fixes: lp:1836267
* https://bugs.launchpad.net/kicad/+bug/1836267
2019-07-14 10:36:48 +01:00
jean-pierre charras
eb1faebf1f
Pcbnew: prepare the new zone filling algo (filled polygons with no thickness). Work in progress.
2019-06-04 21:24:24 +02:00
jean-pierre charras
34ccd0f004
Pcbnew: prepare the new zone filling algo (filled polygons with no thickness). Work in progress.
2019-06-04 09:39:17 +02:00
Jeff Young
d6e9bdf07b
Convert remaining legacy drawing code to print code.
2019-05-31 21:54:22 +01:00
Seth Hillbrand
0a668ee550
pcbnew: Remove segment count from board file
...
This removes the setting for number of segments per circle from the zone
definition. All segment counts are handled by absolute error allowed.
2019-05-24 21:13:53 -07:00
Seth Hillbrand
bf0a466642
pcbnew: Allow adding SHAPE_LINE_CHAIN to zones
2019-05-21 13:49:18 -07:00
Seth Hillbrand
ddc6079ceb
Move remaining hard-coded segment counts
...
This removes the remaining hard-coded segments counts and replaces them
with the relative error calculation where the segments per arc is
determined by the maximum error we allow (smaller arcs = fewer segments)
2019-05-16 08:49:55 -07:00
Jeff Young
fd546da640
Homogenize hit testing and selection return types.
...
Prep work for sharing SCH_SELECTION_TOOL with LibEdit.
2019-05-05 17:14:30 +01:00
Jeff Young
dae41b7460
Remove legacy segment-based zones.
...
Give the user the option of cancelling a file open if there are
segment zones; otherwise they're converted to polygon fills.
Fixes: lp:1823087
* https://bugs.launchpad.net/kicad/+bug/1823087
2019-04-12 20:19:23 +01:00
jean-pierre charras
7170720f3c
Allow hatch pattern in filled zones
...
the filled areas can use a hatch pattern (crossing lines) using square holes.
The zone filler removes too small holes (truncated holes) from hatch pattern.
It avoid to create small holes when a hole pattern is truncated by the filled area base shape.
2019-03-31 08:21:40 +02:00
jean-pierre charras
fdfe5eabfb
Fix incorrect detection of filled zones changes in DRC check.
...
Commit 6006703798
fixed a crash but broke the filled zones changes detection.
Filled zones were always seen as not up to date due to the fact the filled areas were cleared too early.
The up to date detection is also optimized: the old filled polygons are no longer stored.
Instead of, the MD5_HASH is calculated and stored before clearing the filled polygons.
2019-03-21 15:27:05 +01:00
jean-pierre charras
353d9d7c9e
Pcbnew, Zone refill: avoid useless refilling, when zone parameters are not modified.
...
Previously, in many cases the selected zone was refilled on exit selection, even if the zone was not modified.
This is annoying, because the zone fill can be really time consuming, and cannot be called without a good reason.
Now the refilling is made only if a zone parameter is actually modified.
2019-03-14 17:33:25 +01:00
John Beard
b1a2c5d7c5
Zones: wxPoint/VECTOR2I warnings no longer needed
...
In the past, the ZONE_CONTAINER::GetPosition() member
returned a reference to a wxPoint, in accordance with the
BOARD_ITEM interface. This meant that ZONE_CONTAINER had
to reinterpret_cast a VECTOR2I (its internal position data) to wxPoint,
which was possible only due to fortunate memory layout.
This interface was changed to return wxPoints by value in
commit a4528988ca
, and the normal (wxPoint) cast was used instead.
Thus, we can now also remove the dire warnings and static_asserts
used to ensure the now-unused old method was correct.
2019-01-23 10:39:03 -08:00