Commit Graph

193 Commits

Author SHA1 Message Date
Seth Hillbrand c9f11827a7 Don't connect disparate nets
Only some elements get their nets assigned based on connectivity.  Other
elements should be keps in different clusters for connection

Fixes https://gitlab.com/kicad/code/kicad/issues/12622
2022-10-11 15:03:51 -07:00
Seth Hillbrand 87171f53c7 Speedup dynamic ratsnest
Removes some unneeded calculations and threads the remaining.

Threading was previously removed to avoid overhead issues with small
boards.  This is no longer needed with the thread pool implementation

Fixes https://gitlab.com/kicad/code/kicad/issues/12131
2022-10-04 17:06:45 -07:00
Seth Hillbrand 15d52c91e4 Clear ratsnest when removing nets
While we can keep the vector for nets, we need to ensure that the data
are cleared to prevent stale pointer access

Fixes https://gitlab.com/kicad/code/kicad/issues/12564
2022-10-03 09:33:31 -07:00
Seth Hillbrand 6d298b661a Minor speedup for some dynamic ratsnest cases 2022-10-01 13:43:57 -07:00
Jeff Young f095453d3e Optimize ratsnest line endings for zones. 2022-09-30 19:04:54 +00:00
Jeff Young d67437a2aa Move ratsnest exclusion processing to a post-pass.
Also fixes a few cases where we were unnecessarily rebuilding
connectivity more than once for an operation.
2022-09-29 17:08:49 +01:00
Alex dc07ab9df1 Replace PROF_COUNTER with PROF_TIMER in some conditional places. 2022-09-27 14:07:47 +00:00
Mike Williams 700edb95e3 PCB Actions: Grab Unconnected
Grabs the nearest unconnected item for each selected footprint/pad.

Fixes: https://gitlab.com/kicad/code/kicad/-/issues/1986
2022-09-26 16:17:41 -04:00
Seth Hillbrand 26a1114e3c Avoid Yields when the results are ready
We always need to check for calculation results before yielding the
system otherwise we will delay outcomes

Fixes https://gitlab.com/kicad/code/kicad/issues/12228
2022-09-14 13:30:04 -07:00
Jeff Young c30a557810 ADDED netclass assignment from PCB canvas.
Fixes https://gitlab.com/kicad/code/kicad/issues/5975
2022-09-03 19:29:59 +01:00
Jeff Young 2dc6300501 Move EDA_ITEM bounding boxes to BOX2I. 2022-08-31 10:16:55 +01:00
Jeff Young aa2ad3b44c Move KICAD_T[] to std::initializer_list<KICAD_T>. 2022-08-20 10:28:11 +01:00
Seth Hillbrand 35ac39844f Clean up some auto usage
Don't make new copies of shared_ptr if we can use references.  Keep auto
usage down to hard-to-type-out sequences
2022-08-15 11:29:45 -07:00
Jeff Young a9536b5de9 CHANGED netclass assignments now done via canvas or via patterns. 2022-08-14 22:56:29 +01:00
Jeff Young 96f01d33c8 Performance improvements.
1) Move a bunch of std::map's to std::unordered_map to get constant-time
look-ups
2) Lengthen progress-reporting intervals to spend more time doing work
and less time talking about it
3) Reverse order of SHAPE_LINE_CHAINs in thermal intersection checks to
make (much) better use of bbox caches
4) Don't re-generate bboxes we already have
5) Fix some autos that weren't by reference (and were therefore copying
large datasets)
6) Rename delta progressDelta so it's easier to search for in future
7) Get rid of a few more autos (because I don't like them)
8) Pass large items to lambdas by reference

Fixes https://gitlab.com/kicad/code/kicad/issues/12130
2022-08-03 11:59:42 +01:00
jean-pierre charras 4d48376eae Fix some warnings detected by PVS-STUDIO (not used vars) 2022-07-26 16:00:14 +02:00
Jeff Young f41af10007 Clean up hole shapes for safety (smart pointer) and consistency. 2022-07-22 23:06:07 +01:00
Seth Hillbrand 03c279ffd4 ADDED: Threadpool
Thread pools are long-lasting executors that have close to zero overhead
when launching new jobs.  This is advantageous over creating new threads
as we can use this for threading smalling jobs and smaller quanta.  It
also avoids the heuristics needed to determine the optimal number of
threads to spawn
2022-06-24 22:59:24 +00:00
Jeff Young 82ebc247b8 More performance enhancements for DRC. 2022-06-18 19:47:11 +01:00
Jeff Young 3f502b313d Don't return false when a particular item doesn't connect.
We still have to search all the other items, as they might connect.
2022-05-23 10:26:18 +01:00
Seth Hillbrand 442aae19d9 Separate flashing check for connectivity
When building the connectivity database, we should not be using the
connectivity to check for shapes.

To make this deterministic, we introduce two flags (ALWAYS_FLASH and
NEVER_FLASH) that are used with connectivity building to determine
whether a pad is flashed for connectivity or not.  ZONE <-> PAD/VIA
connectivity will be checked with ALWAYS_FLASHED and all other
connectivity will be checked with NEVER_FLASHED if they are marked for
potential annular ring removal.  If they are not marked for removal,
they will be checked ALWAYS_FLASHED.

Fixes https://gitlab.com/kicad/code/kicad/issues/11114
2022-03-16 17:30:01 -07:00
Jeff Young cabcaf933c Cleanup. 2022-03-16 14:56:32 +00:00
jean-pierre charras 7fb4a2c0a5 CONNECTIVITY_DATA::IsConnectedOnLayer(): fix crash in some cases.
Fix crash when a zone do not have filled areas on a given layer.
2022-03-12 19:31:46 +01:00
Jeff Young 0a8718cd1d Fix issue when we ask if a pad is connected to a zone we're in the middle of filling. 2022-03-12 14:17:53 +00:00
Jeff Young eb9ccea559 Performance improvement. 2022-03-10 13:46:42 +00:00
Jeff Young fed5bcbdf6 Improvements for pads/vias in zones which knockout other zones.
1) Drop tiny islands which might cause connection problems.
2) Cleanup some dead code in filler
3) Don't estabilish a connection to an island that is fully covered
by whatever its connecting to.

Fixes https://gitlab.com/kicad/code/kicad/issues/11036
2022-03-05 18:59:53 +00:00
Seth Hillbrand b5c2f0d39a Remove the open array in favor of std containers
The containers allow iteration, size knowledge and lower bug surface
2022-03-03 16:03:26 -08:00
Jeff Young d9d23dd06b Commenting. 2022-02-21 12:26:59 +00:00
Jeff Young aa2c8e9b0c A more discerning un-flashed-connectivity test. 2022-02-20 23:49:02 +00:00
Jeff Young fad4c135fa Use only a physical connection to determine flashing of pads.
Checking for proper nets just confuses things when the nets are set
wrongly for some reason.  This way we generate clearer DRC errors.

Fixes https://gitlab.com/kicad/code/kicad/issues/10645
2022-02-20 20:54:56 +00:00
Jeff Young 08383e923c Formatting. 2022-02-16 14:18:25 +00:00
Jeff Young ca095896cb Performance: multi-thread CN_ZONE_LAYER RTree generation. 2022-02-16 14:11:09 +00:00
Jeff Young 3b292a4941 Cleanup and code clarity. 2022-02-16 12:00:18 +00:00
Jeff Young 72a389e612 Performance: check line ends first before doing collision. 2022-02-15 19:19:03 +00:00
Jeff Young 2172810600 Performance: better sharing of zone fills. 2022-02-15 19:19:03 +00:00
Jeff Young d8c4f2cb09 Performance improvements for zone filler. 2022-02-15 19:19:02 +00:00
Jeff Young 8e26946567 Don't shrink progress reporter when message changes; only grow. 2022-02-15 19:19:02 +00:00
Jeff Young 5c9e718407 Performance enhancements for connectivity.
1) Generate SHAPE_POLY_SET triangulation by outline so they can be
shared between connectivity system and other clients.
2) Don't add items to connectivity when reading board; we're going
to do a total rebuild anyway.
3) Use multithreading when caching triangulation.
2022-02-15 12:20:34 +00:00
Jeff Young 98b9c6e2a1 Better progress reporting and a slight performance boost on commit. 2022-02-15 12:20:34 +00:00
Jeff Young d2de114d21 More performance optimizations. 2022-02-15 12:20:34 +00:00
Jeff Young d07910de06 Improve performance of checkZoneZoneConnection. 2022-02-14 01:15:06 +00:00
jean-pierre charras bff97df5f9 Fix a compil warning, at least on my msys install. 2022-02-13 16:26:05 +01:00
Jeff Young c4e133fdf7 Auto reduction and std::shared_ptr cover types reduction.
And a performance optimization or two resulting from above.  (Using
const& intead of copying std::shared_ptrs.)
2022-02-13 12:04:03 +00:00
Jeff Young 90f6edad61 Move connectivity algo to collision-based routines.
Fixes https://gitlab.com/kicad/code/kicad/issues/1800

Fixes https://gitlab.com/kicad/code/kicad/issues/1769
2022-02-13 00:35:11 +00:00
Jeff Young 3deaf902bb Retire the V5 zone fill algorithm.
Fixes https://gitlab.com/kicad/code/kicad/issues/10578
2022-02-11 13:10:52 +00:00
Jeff Young 6e063247e5 Move CN_VISITOR from HitTest() to Collide().
The former isn't sufficiently aware of layer differences (such as for
pads with some layers unflashed).
2022-02-11 13:10:52 +00:00
Jeff Young e59aaf05c6 Make sure that GetConnectedItems searches from the root item.
Fixes https://gitlab.com/kicad/code/kicad/issues/10583
2022-02-06 19:43:25 +00:00
Marek Roszko 41f54349a5 Replace inserts/push_backs with emplace in some spots 2022-02-05 19:53:31 -05:00
Jeff Young 7ccac79192 More wxString wide literals. 2022-02-05 21:29:34 +00:00
Jeff Young dcaec78cc5 A bit more angle cleanup. 2022-01-18 02:18:55 +00:00