e34b829242
Prevent an encoding error when generating python API DoxyGen
...
Signed-off-by: hoijui <hoijui.quaero@gmail.com>
2021-01-07 17:36:49 +00:00
0234b7278a
PNS: Make DIRECTION_45 North be up everywhere
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6935
2021-01-06 21:47:06 -05:00
eef16fe717
Standardize rescale
...
Rescale was returning differing results based on 32-bit vs 64-bit
implementations. Speed difference here appears to be positive.
2021-01-06 17:52:14 -08:00
2a088e5c7b
Add conversion of circles to zones and enable in footprint editor.
...
Also rule areas, of course.
Fixes https://gitlab.com/kicad/code/kicad/issues/6966
2021-01-06 17:21:49 +00:00
7431d5c985
PNS: First pass at updating meander placers for arcs
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6464
2021-01-05 17:57:21 -05:00
8619086cf2
PNS: re-enable optimization of colinear segs in lines with arcs
2021-01-05 17:57:21 -05:00
8901e71fc8
PNS: Fix loop removal, make walkaround less broken for arcs
2021-01-05 17:57:21 -05:00
aebb571dc9
Short-circuit arc generation if we are on a diagonal
2021-01-05 17:57:21 -05:00
5a97764319
Make segment contain its edge
...
This allows segment snapping along its diagonals to the grid.
Fixes https://gitlab.com/kicad/code/kicad/issues/6924
2021-01-03 12:47:33 -08:00
eaffacbc85
PNS: construct initial lines with arcs more precisely
2021-01-02 23:57:09 -05:00
af4c6393bb
Fix arc collisions to account for width
...
This was causing arcs to be really hard to start routing from
2021-01-02 22:01:05 -05:00
73248ab219
PNS: correct initial segment direction for posture solver
2020-12-31 13:05:43 -05:00
111c644a82
Don't append zero-length arcs
2020-12-31 13:05:43 -05:00
fbdf31d35a
Prevent creating arcs with slightly offset endpoints
2020-12-31 13:05:43 -05:00
23c9eddf2d
Cleanup
2020-12-30 18:29:41 -05:00
79502a0d88
PNS: A new approach to arc placement
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6334
2020-12-30 18:23:24 -05:00
af2219ba7f
Finish implementation of hole clearance checking.
...
It appears we never did via hole testing, and pad hole testing didn't
appear to get much testing.
2020-12-25 22:32:19 +00:00
ea351fde69
Recache polygon triangulation when mirroring
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6265
2020-12-20 10:45:24 -05:00
bc484784fc
Make sure zones are triangulated for DRC.
...
Normally this happens as a side-effect of rendering them but if done
from a script (or test case) this won't happen.
Fixes https://gitlab.com/kicad/code/kicad/issues/6635
2020-12-12 15:27:46 +00:00
f08b7f098f
Cleanup.
2020-12-12 15:27:46 +00:00
807eef1208
Better error reporting to try and catch 6635.
2020-12-12 12:22:52 +00:00
2c2630ef9e
Formatting.
2020-12-12 03:43:41 +00:00
be4b6ec06a
Cleanup compiler warnings
2020-12-09 23:13:33 +00:00
37178e3751
Formatting.
2020-11-29 14:02:46 +00:00
68625494f3
specctra_export: fix an issue with custom and chamfered/round rect pads.
...
Is some cases a created pad stack name had the same name as an other pad stack
having a slightly different shape, thus creating pads with a incorrect shape on board.
Fixes #6495
https://gitlab.com/kicad/code/kicad/issues/6495
2020-11-25 13:57:46 +01:00
9c7c05c161
Mostly formatting cleanup but a few type-casting cleanups too.
2020-11-24 22:16:41 +00:00
45598f2933
Add handling of DXF arbitrary axis/extrusions
...
This fixes some DXFs imports where unforunately CAD tools like SolidWorks
randomly decide to mirror circle definitions across the "z" axis (resulting in x or y axis flips in 2d)
Most likely live projection from 3D to 2D drawings introduces this.
However this is DXF specification to describe it so obtusely with vectors for a 2d drawing.
2020-11-23 21:24:38 -05:00
0e44f5128c
Add const specifiers
2020-11-18 19:50:36 +00:00
7265f84358
fix PAD::TransformShapeWithClearanceToPolygon() incorrect calculation in some cases.
...
For round rect pads, when the arc error was OUTSIDE, the shape was too big and creates
bad shape for chamfered round rect pads.
For chamfered pads, when the clearance value was not 0, the chamfer was not at the
right place.
2020-11-14 08:50:58 +01:00
63773809d0
Formatting.
2020-11-10 18:08:25 +00:00
791a50b493
Remove work-around in favour of real fix in Clipper.
2020-11-04 11:21:45 +00:00
55c25f3cc4
Work around a round-off bug in Clipper.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6260
2020-11-02 17:43:13 +00:00
6bf29deb7f
Improve formatting.
2020-10-31 17:25:08 +00:00
a7d5d1f091
Add more consts all over the place
2020-10-27 11:03:35 +00:00
d1c73cb1d5
Clean up MODULE effective shape memory handling.
2020-10-25 23:38:21 +00:00
31cc100669
Don't make clients deal with nested SHAPE_COMPOUNDs.
2020-10-25 18:17:58 +00:00
d6f91c810f
Fix a few compil and Coverity warnings.
2020-10-25 10:02:07 +01:00
59f3fefd17
When polygonizing arcs don't use synthesized center and angle.
...
Start, mid and end are the "real" properties and come with less
error.
Also collapses two arc polygonization routines into one.
Also fixes DRC checks to be cognizant of arc approximation error.
Fixes https://gitlab.com/kicad/code/kicad/issues/6039
2020-10-23 23:55:45 +01:00
1cb7fbaab1
Fix errors in arc polygonization and test case.
...
1) Tests can't expect accuracies around 1 to work. PCBNew defaults
to 5000.
2) Tests shouldn't artifically expand tolerance just to match the
results.
3) Tests should guarantee that end point is on arc, not just close
to it.
4) Standard polygonization of a circle is inside so splitting the
error needs to increase radius, not decrease.
5) Special-case first and last points so that they're exact.
2020-10-23 23:55:45 +01:00
19bf594aa0
Remove unused point in polygon test
...
There can be only one.
2020-10-23 12:13:09 -07:00
58c006bc45
Register properties for ARC elements so we can get their netclass.
...
Also improves GAL arc drawing and polygonization.
Fixes https://gitlab.com/kicad/code/kicad/issues/6039
2020-10-23 14:27:36 +01:00
5b4f463c38
kimath: SHAPE_POLY_SET::Format() outputs C++-like code now, like other shapes
2020-10-23 01:18:01 +02:00
a8074ed37d
kimath: POLY_GRID_PARTITION now uses safer degeneracy (overlapping edges/'slits') handling mechanism. Also added some explanation of the algorithm used.
2020-10-23 01:17:54 +02:00
8185a416b9
Fix broken build on Linux with gcc.
2020-10-22 08:36:28 -04:00
9ff49277e1
Add implicit rule generation for keepout areas.
...
Also implements collision detection for SHAPE_POLY_SET.
Fixes https://gitlab.com/kicad/code/kicad/issues/6105
2020-10-22 10:41:21 +01:00
bfd04926b5
Performance improvement for polyset fracture.
2020-10-20 22:26:47 +01:00
006c462d8f
ADDED: Fillet Tracks tool in pcbnew
...
Select two or more track segments and run the "Fillet Tracks" tool.
2020-10-20 21:23:05 +00:00
bbe7573d1c
Performance enhancements to roundrect pads and clearance outlines.
...
Aka: avoid Clipper at all costs.
Fixes https://gitlab.com/kicad/code/kicad/issues/5900
2020-10-14 15:56:43 +01:00
54dc91a623
Account for segment width in aActual calculation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5990
2020-10-14 15:56:32 +01:00
1703729269
Require explicit decl of maxError and errorLocations.
...
This should reduce both performance issues and clearance issues.
2020-10-13 13:49:07 +01:00
hoijui
Jon Evans
Seth Hillbrand
Jeff Young
Ian McInerney
jean-pierre charras
Marek Roszko
Werni
Tomasz Wlostowski
Wayne Stambaugh
Roberto Fernandez Bautista