244c37298f
Fix Doxygen commenting issues.
2023-03-24 11:57:52 -04:00
b8cf7cc080
Split name from additional params only when model is a library reference.
2023-03-22 13:52:17 +00:00
5bda3b99f9
Handle single-token flag parameters.
...
Also fixes a bug where all VDMOS instance parameters weren't marked as
instance parameters.
Also fixes a bug where VDMOS thermal models weren't supported (they
have two extra pins: Tj and Tcase).
2023-03-22 13:52:17 +00:00
9dc16eb014
Don't include non-overridden parameters in Sim.Params.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/14369
2023-03-22 13:52:17 +00:00
39a801423e
Separate legacy model name from parameters.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13988
2023-03-21 13:29:17 +00:00
016c958021
Always build spice simulator support
...
The simulator has advanced considerably, and it is seeing lots of active
development, so make it a required part of KiCad. Additionally, the
build without the simulator has actually been broken for a while, so no
one clearly is building without ngspice right now.
2023-03-20 16:54:32 +00:00
5798b586f0
Ignore extraneous LTSpice parameters for VDMOS models.
...
Also adds special case handling of VDMOS syntax to allow parens (or extra
spaces, linebreaks, etc.) between "VDMOS" and "NCHAN"/"PCHAN".
Fixes https://gitlab.com/kicad/code/kicad/issues/14299
2023-03-20 16:16:44 +00:00
a14c017def
Save location of legend in worksheet.
...
Also provides a different cursor when over a legend (to make it clearer
that you can drag it).
2023-03-20 09:51:41 +00:00
ec6d709929
Make sure legend reflects gain/phase for AC small signal analyses.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/14301
2023-03-19 23:02:58 +00:00
607622e8f8
Make the two Create() methods more parallel.
2023-03-17 15:58:28 +00:00
222cd4d009
Handle underscore in parameter names.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/14308
2023-03-16 23:40:52 +00:00
6d296038f3
Improve simulation error reporting.
...
1) More REPORTER, less exception processing
2) Remove UI calls from SPICE_MODEL
3) Don't replace netlist with errors; show both
4) Don't bail out of netlist generation after single error
Fixes https://gitlab.com/kicad/code/kicad/issues/14295
2023-03-16 16:12:29 +00:00
5041bddc3b
Union workbook sim commands with any defined on schematic.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/14215
2023-03-10 21:33:06 +00:00
3bc5e3dd8a
Added PSPICE/LTSPICE JFET model parameters.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12425
2023-03-10 21:33:06 +00:00
6343147bb3
Fix Coverity warnings.
2023-03-08 11:37:56 +01:00
630ff02369
Fix bone-headed logic.
...
(Else clause never gets called because 3 is always > 2.)
2023-03-06 10:26:59 +00:00
5b43dc4e7b
Simulator: Fix diode ibv unit
2023-03-05 19:23:33 +02:00
d2bd7e33b9
Remove extra canvas redraws when changing sheets.
2023-03-05 04:33:07 +03:00
610e787ada
Move to requiring explicit action to save project settings
2023-03-04 14:25:07 -05:00
4e99812145
Coverity fixes and code cleaning.
2023-03-04 13:02:05 -05:00
d714ff8549
Don't commit changes on paint events or updateUI events.
...
Also use std::numeric_limits::epsilon for comparing doubles.
Fixes https://gitlab.com/kicad/code/kicad/issues/13851
2023-03-04 00:10:01 +00:00
b6d0b65261
Naming conventions and commenting. No functional changes.
2023-03-04 00:10:01 +00:00
14f1f3ec79
Convert inline models in Sim.Params fields to SPICE syntax.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/14157
2023-03-03 18:18:03 +00:00
dcba555d44
Make SME prop-grid hack Mac-only.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13852
2023-03-02 10:42:13 +00:00
63a545ebfd
We don't need "(gain)" or "(phase)" in names any more.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/14140
2023-03-02 00:38:39 +00:00
190ee58ccf
Don't deliver pedantic error messages to user.
2023-03-02 00:38:39 +00:00
db2780090c
Simulator: Fix RLGC c unit
2023-03-01 23:03:54 +00:00
9c68d4792f
Fix bungle from earlier merge.
2023-03-01 13:43:46 +00:00
f5edcf82f2
Move only-write-model-if-it-contains-overrides up to base class.
...
It's necessary to keep us from writing out model lines for included
models and fall-backs of included models.
2023-03-01 13:31:57 +00:00
4a761179d0
Simulator: Fix some cases with initial conditions
2023-02-28 21:31:04 +00:00
281fde71b9
Make SIM_MODEL_SPICE_FALLBACK act more like the model it's a fallback for.
...
In particular, install/show the parameters, and keep the existing name
field.
Fixes https://gitlab.com/kicad/code/kicad/issues/14102
2023-02-28 12:26:04 +00:00
766b1a1ca8
Continue rationalisation of vector, trace and signal names.
...
Also add a little bit more code so user-defined signals can be edited
without resetting their properties.
Fixes https://gitlab.com/kicad/code/kicad/issues/14072
2023-02-27 21:11:31 +00:00
5b2784f418
sim - switches: open <-> closed in description
2023-02-27 09:54:14 +00:00
79f13ea9c7
Don't eval empty string.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13756
2023-02-26 23:14:09 +00:00
beb177fa79
Try and sort out the mess that is trace names and trace titles.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/14016
2023-02-26 18:08:42 +00:00
551773bf17
Save plot prefs (legend, grid, and dotted-secondary).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13940
2023-02-26 11:57:49 +00:00
23c1a23faf
Provide power axis for DC-sweep analyses.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/14087
2023-02-25 23:11:29 +00:00
8c8c5e1824
Provide a default xaxis for DC-sweep so we can add traces before sim is run.
2023-02-25 22:42:52 +00:00
1fdc81e68d
Make substrate and thermal junction nodes optional.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/14083
2023-02-25 20:36:30 +00:00
77ed53ab25
Nullptr safety.
2023-02-25 18:33:32 +00:00
49a9fe38a0
Fix a compil warning
2023-02-25 19:06:46 +01:00
4b427b2d0c
Add second instance of "don't mess up user formatting" fix.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13989
2023-02-25 16:31:16 +00:00
2e5bf0210a
Clear model name when switching to internal model.
...
Also fixes a bug to ensure that a modelLine gets written when using
an internal model.
Fixes https://gitlab.com/kicad/code/kicad/issues/14083
2023-02-25 15:22:20 +00:00
9a0aeb4344
Adjust AC-small-signal plot names when saving placeholders.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/14016
2023-02-25 13:26:33 +00:00
ee956673b1
Respect readOnly cells in GRID_TRICKS.
...
Also fixes setting colors in the signals grid as it allows us to make
it editable again.
Fixes https://gitlab.com/kicad/code/kicad/issues/14079
2023-02-25 11:02:12 +00:00
5a12e5ee76
Only write included models if they have overridden parameters.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13953
2023-02-24 20:31:35 +00:00
c188318174
Change strategy for committing values from SIM_MODEL propGrid.
...
Note that the PCB editor's propGrid doesn't seem to need this workaround,
but I haven't yet figured out what's different between it and the sim model
propGrid.
Fixes https://gitlab.com/kicad/code/kicad/issues/13852
2023-02-24 14:22:00 +00:00
200a06a677
Cleanup some dead code, and add a potentially needed fix for non-Mac.
...
(The Mac bug is fixed in 4e5b1da81fce7cd9ffedaec878ed07bfcfff4fe2 in
our wxWidgets fork.)
2023-02-24 12:44:55 +00:00
8059edff0e
Don't mess up user formatting if eval'ing didn't actually change value.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13989
2023-02-24 12:44:55 +00:00
71df3f9edb
Don't allow extra text in Sim.* fields.
...
(In particular, the field name.)
Fixes https://gitlab.com/kicad/code/kicad/issues/13996
2023-02-24 12:44:55 +00:00
2b3eb0b522
fix minor compil warnings
2023-02-23 09:50:28 +01:00
4917abe655
Make sure whitespace at end of command doesn't mess up detection.
...
(Fixes the failing test case.)
2023-02-22 23:29:13 +00:00
cdbb868198
sim - allow users to delete several measurements at once
2023-02-22 19:27:20 +01:00
9006f38e70
sim - Don't allow user to delete the type-in measure entry
2023-02-22 19:27:20 +01:00
1170fb2e18
sim - don't create measurement duplicates
2023-02-22 19:27:20 +01:00
aa006e9b91
sim - allow to add several measurements at once.
2023-02-22 19:27:20 +01:00
6fcae34f6b
Clear operating points on all sim types.
...
(We'll fill them back in if we have data.)
Also improves handling when a plot tab is closed.
Also fixes dirtying of the view for op changes.
Fixes https://gitlab.com/kicad/code/kicad/issues/13990
2023-02-22 15:54:18 +00:00
fe2679d965
Implement default levels for JFETs, MOSFETs and MESFETs.
2023-02-22 15:54:18 +00:00
ae3a5c1c5f
sim - set the dialog list as read only
2023-02-22 15:54:49 +01:00
f2419e9e9b
sim - Fix power graphs
2023-02-22 13:18:12 +01:00
cb71ea872b
Don't allow 0 field text size.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13987
2023-02-22 11:40:49 +00:00
e24ddd0be4
ADDED: Measurement on power signals and integrals
...
Fixes #14028
2023-02-22 12:11:09 +01:00
f828d50cb0
Better processing of single-empty-row rule for measurements grid.
2023-02-22 10:45:27 +00:00
5fa7be0320
Update signals after running a sim.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/14016
2023-02-22 10:45:27 +00:00
a126d961d8
More dead code removal and a bit of formatting and const& for strings.
2023-02-22 10:45:27 +00:00
68fe146861
Remove most of SIM_VALUE in favour of good old wxString.
...
This allows us to save the user's intent, including units, formatting,
and crucially variable references.
2023-02-22 10:45:27 +00:00
29f21cdde6
Terminology and more dead code.
2023-02-22 10:45:27 +00:00
90adc26b73
Remove dead and redundant code.
2023-02-22 10:45:27 +00:00
543a3317b4
Fix typo
2023-02-21 18:01:13 +00:00
761b59da90
Read and write user-defined signals and measurements to workbook file.
2023-02-21 13:32:01 +00:00
7fd707952b
Easier editing of new sim measurements.
2023-02-21 13:32:01 +00:00
6fcb95b24e
ADDED user-defined signals.
2023-02-21 13:32:01 +00:00
f6fcae479c
Don't generate error messages fetching sim data we know isn't there.
2023-02-21 13:32:01 +00:00
b05b33a9ff
Fix a compil issue with gcc12.2 and Coverity warnings.
2023-02-21 11:54:38 +01:00
31be74b8b3
Fix a few Coverity warnings
2023-02-20 09:25:01 +01:00
d55e2049e5
Silence some warnings with static_casts
2023-02-18 23:36:50 -05:00
aacc9746e3
Yeet the last of wxSize/wxPoint to stop leaking gdicmn everywhere
2023-02-18 22:57:18 -05:00
facd50f4fd
sim - missing assignment
2023-02-18 15:36:47 +00:00
07f79208b9
Minor fixes: Coverity and compil minor warnings.
2023-02-18 13:04:43 +01:00
5482bc2905
sim - Check FindParam() results before using them
2023-02-18 12:54:55 +01:00
f5902dad28
sim - don't write dc parameter twice
2023-02-18 10:07:29 +00:00
fa0cc09917
sim - allow sources that are both AC and TRAN
2023-02-18 02:17:48 +00:00
39a1b14a0f
sim: VSIN - allow user to specify a phase
...
TD is not the same as PHASE.
TD is the delay before the source turns on.
PHASE is ... the phase
If only TD is set, the signal starts later, but the phase is still 0 when compared to the t=0 of the simulation.
2023-02-18 00:38:46 +00:00
8b1318c92f
Update associated data structures after changing trace colour.
...
Also removes likely benign but never-the-less useless grid even processing
during rebuilding of the grids.
Fixes https://gitlab.com/kicad/code/kicad/issues/13956
2023-02-17 00:47:01 +00:00
d5e50b70bb
Display a generic "Value" column label when there are no cursors.
2023-02-16 16:55:26 +00:00
f50d114b27
Push gain & phase for .probe statements in AC analysis.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13941
2023-02-16 16:14:25 +00:00
95232edd0d
Do a better job of looking for .probe commands in directives.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13941
2023-02-16 12:42:54 +00:00
d8a4f9821e
Smarten regex to accept ':' in signal names.
...
(In fact, just accept anything up to the closing paren.)
Fixes https://gitlab.com/kicad/code/kicad/issues/13942
2023-02-16 12:20:55 +00:00
c618bb7046
Correctly netlist a voltage source with both AC and DC values.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13912
2023-02-15 14:50:31 +00:00
dca1281263
Fix some typos
2023-02-14 23:47:05 +02:00
9ce18dffdd
Better startup experience for simulator.
...
Pre-load signals list (and plot panel if there is an schText simulation
command).
Also fixes a bug where the workbook was getting dirtied on open because
the events would fire after the dirty flag had been cleared.
2023-02-14 11:59:17 +00:00
df00585a55
ReadDataFields must be a separate step from Create.
...
Create() is done without execption processing, while ReadDataFields
should have exception processing.
(This also fixes a case where exception processing on ReadDataFields
was missing.)
Also fixes a bug where the pinSelect menu wasn't checked for -1 before
fetching.
Fixes https://gitlab.com/kicad/code/kicad/issues/13856
2023-02-13 12:43:25 +00:00
2cc3d8e9bc
Prevent a crash when a spice SW_I lacks two pin net names
...
Fixes KICAD-5D
2023-02-12 22:26:19 -05:00
74eb587291
Better sorting within sections (voltage, current, power).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13846
2023-02-12 23:16:45 +00:00
4665823089
Turn on and fix MSVC compliance mode issues
...
We want /permissive- to enable debug performance improvements in MSVC 17.5+.
This flag is also default under C++20 so we'll have to deal with these compile issues anyway at some point in the future.
In particular, MSVC becomes pedantic about ternary types.
See https://learn.microsoft.com/en-us/cpp/build/reference/permissive-standards-conformance?view=msvc-170#ambiguous-conditional-operator-arguments
MSFT cites https://cplusplus.github.io/CWG/issues/1805.html
2023-02-12 16:30:37 -05:00
6af3dadaee
Fix SPICE pins for BJTs and MESFETs
...
- MESFETs don't have a substrate/bulk pin
- BJTs have a substrate pin, and HICUM/VBIC have TJ
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13848
2023-02-12 21:20:02 +00:00
a22964a977
Prepend correct SPICE prefix when necessary for plotting currents.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13850
2023-02-12 21:17:45 +00:00
1e756dbdd8
Save cursor positions in sim workbook.
2023-02-12 20:40:23 +00:00
83dd06e5d1
Allow opening of workbook when simulation frame is opened.
...
This involved splitting creation of traces from setting of trace
data.
Also renamed SIM_WORKBOOK to SIM_NOTEBOOK. This class is a subclass
of wxAiuNotebook and represents the collection of simulation plot tabs.
It is NOT the same thing as a simulation workbook, which contains other
stuff such as measurements, plotted signals, colours, etc.
This also removes a bunch of "friend" declarations.
2023-02-12 20:40:23 +00:00
78746b77c6
Save trace colors and cursor value formatting in sim workbook.
2023-02-12 20:40:23 +00:00
84c72b087c
Simplify (and fix) logic for starting new simulations.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13853
2023-02-12 20:40:23 +00:00
1fb2d138b4
Fix a compil issue.
2023-02-12 09:16:42 +01:00
9d3a3d705d
ADDED simulation measurements.
2023-02-11 21:11:07 +00:00
e5176ff4d6
ADDED power dissipation plotting and cursors.
...
Also fixes a bug so that voltages, currents and power dissipations are
only probed if the flag is set -- this keeps ngspice from throwing an
error if you probe something twice (for instance, if you have .probe
commands in text and turn off the auto-probing).
2023-02-11 21:11:07 +00:00
bc108023b3
ADDED operating point overlay for SCH_EDIT_FRAME.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11253
2023-02-11 21:11:07 +00:00
2a5bb71fbd
ADDED operating point text variables for labels and symbols.
...
ADDED formatting for cursors and operationg points
Also fixes a bunch of bugs to make the new cursors work with .ac sims.
Fixes https://gitlab.com/kicad/code/kicad/issues/11253
Fixes https://gitlab.com/kicad/code/kicad/issues/6965
2023-02-11 21:11:07 +00:00
b3ffbd6258
Don't include unconnected nets in signals list.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4961
2023-02-11 21:11:07 +00:00
39d35a8bec
Better cursor feedback for plot window.
2023-02-11 21:11:07 +00:00
9a99106981
Cleanup.
2023-02-11 21:11:07 +00:00
f0bd25b397
ADDED use-settable simulation trace colors.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2536
2023-02-11 21:11:07 +00:00
09822c7f18
ADDED direct access to signals & cursors.
...
ADDED differential cursors.
Fixes https://gitlab.com/kicad/code/kicad/issues/4447
Fixes https://gitlab.com/kicad/code/kicad/issues/6221
2023-02-11 21:11:07 +00:00
6bc89ee180
Don't disable run when there's no command: just ask for a command.
2023-02-11 21:11:07 +00:00
7d7a48070e
Separate error messages when sim model and project paths are the same.
2023-02-11 21:11:07 +00:00
a1a1a49729
On-the-fly language updates for simulator window.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13357
2023-02-11 21:11:07 +00:00
b000d68def
Move simulator to tool framework.
2023-02-11 21:11:07 +00:00
946e0a4b98
ADDED support for e-series based tuning.
2023-02-11 21:11:07 +00:00
81a55c42a1
Fix unintentional string change in IBIS parser.
2023-02-11 02:19:06 +03:00
3d23d0e16a
Fix compatibility with wxWidgets 3.0.5
...
Fixes #13808
https://gitlab.com/kicad/code/kicad/issues/13808
2023-02-07 21:09:03 +01:00
4065e413ea
Ibis parser: do not report activity when there are no errors.
...
The dialog to add a library expects no message when there are no error.
Fixes #13794
https://gitlab.com/kicad/code/kicad/issues/13794
2023-02-06 12:55:52 +01:00
d1f6ba77e8
Better error reporting, and don't infer models with library references.
2023-02-04 20:55:52 +00:00
56a1cdb4dc
Allow a limited set of un-braced expressions in SPICE model values.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13768
2023-02-04 19:49:48 +00:00
e8397a33bb
Refrain from copying SPICE_INFO.
2023-02-04 00:05:50 +00:00
a51dc8c9de
HiSIM_HV MOSFET models are *not* the default type
...
The ngspice manual does not indicate that there is any default
model type. This change ensures we get a `level=xy` written out to the
.model line when we select a HiSIM_HV model.
2023-02-04 00:03:25 +00:00
5abe1a201b
spice: generate .model lines for all device types
...
- generate .model lines in spice netlist for all device types that need
one
- add "level=<n>" to .model line for non-default model levels. This is
necessary to allow more sophisticated models to be used, and some
devices *always* need a level specified (e.g. JFETs)
- add "version=<n>" to .model line for models that have multiple
versions available (AFAIK only affects HiSIM_HV MOSFET models)
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13775
2023-02-04 00:03:25 +00:00
41c4ee2245
ngspice requires J prefix for JFETs in netlist
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13774
2023-02-04 00:03:25 +00:00
ed5fb2769f
Allow more characters (in particular '_') in code model names.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13769
2023-02-03 23:49:53 +00:00
8b03c093f9
Move potentiometer pin model to r0, wiper, r1, and remove flipping code.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13741
2023-02-02 16:22:13 +00:00
ab0c4dd292
Must do pin swap in model pins, not item pins.
...
Item pins might not be in the same order.
Fixes https://gitlab.com/kicad/code/kicad/issues/13741
2023-02-02 12:44:55 +00:00
b4a75cd1d5
Write out a diode .model for built-in diodes.
2023-02-01 12:36:27 +00:00
123467c8dd
Don't throw up debug message when signal is deleted.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13711
2023-01-30 21:32:18 +00:00
c939b1ef76
Followed-by-3-digits doesn't guarantee a thousands separator.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13708
2023-01-30 21:22:48 +00:00
4e50c5313d
More safety for array access.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13583
2023-01-24 00:07:40 +00:00
00f93db2ff
Convert wide chars before reading model
...
The PEGTL parser used by KiCad for SPICE models only handles ASCII
characters. Despite the docs stating that you can, in theory, parse a
UTF-8 character by reading the base string, in pratice this does not
work as the UTF-8 string is represented by unsigned chars and the PEGTL
string is based on signed char.
To work around this, we need to convert micro and mu to the ASCII 'u'
equivalent
Fixes https://gitlab.com/kicad/code/kicad/issues/13642
2023-01-23 15:23:41 -08:00
542719c753
Add "all" mode to HSPICE emulation.
2023-01-21 19:32:25 +00:00
4d7ddf619a
Remove unused var and cleanup
2023-01-20 13:26:11 -08:00
f7ebaf1bab
Add compatibility mode for netlist code.
...
(The non-A compatibility modes only run on included files.)
Fixes https://gitlab.com/kicad/code/kicad/issues/13589
2023-01-20 18:06:17 +00:00
ee3e285393
Correctly parent simulator netlist error dialogs.
2023-01-19 07:59:30 -05:00
0e778f17db
Add context menu for simulation cursors.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13580
2023-01-19 12:50:21 +00:00
959e20f52c
A fall-back model for FOO should supply FOO's pin names.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13589
2023-01-19 12:14:50 +00:00
1df81b10e6
Explicitly convert std::string to wxString
...
In wxWidgets STL builds the compiler has multiple, ambigous choices
for converting - both arguments to std::string first, or just the
first to wxString.
Fixes #13432 .
2023-01-14 22:58:54 +00:00
4c5a344629
Allow editing of raw SPICE models through code tab.
2023-01-14 02:43:34 +00:00
098d2b30a2
Support for simulation options in workbook and simulation command dlg.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13524
Fixes https://gitlab.com/kicad/code/kicad/issues/13523
Fixes https://gitlab.com/kicad/code/kicad/issues/13431
2023-01-14 00:21:45 +00:00
e7e2085b2a
Allow vector param values.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13431
2023-01-13 21:59:06 +00:00
7fbad183db
Gracefully handle Quit when simulator window is open.
2023-01-13 16:35:45 +00:00
4391fc7a7a
Don't be annoying about refusing to create traces when there's no data.
2023-01-13 16:35:45 +00:00
52163c7b31
Hold off on one-library-per-SIM_LIB_MGR. It's too risky for 7.0.
2023-01-12 16:29:51 +00:00
d839f11d49
Rip out parsing of SPICE libraries for netlisting.
...
We only need to parse the libraries for the Sim Model Editor dialog
(so that we can determine the models to put in the popup). Doing it
for netlisting just opens us up to incorrectly parsing the SPICE, and
returns no value.
This also means that a SIM_LIB_MGR manages a single library, and
never multiple libraries.
This also allows the tidying-up of some error reporting structures to
better inform the user what went wrong.
Fixes https://gitlab.com/kicad/code/kicad/issues/13431
2023-01-12 14:51:03 +00:00
c43050b91b
Remove safety around reading default parameter from Value field.
...
This should be OK now because we should be writing out all parameters
now (even if they're default value).
But perhaps more to the point, if we have the safety in there then
we miss cases where we really can't parse the model (value of "{VCC}")
and we need to fall back to a raw spice model.
Fixes https://gitlab.com/kicad/code/kicad/issues/13444
2023-01-09 15:24:45 +00:00
d65cf1b457
Check parameters before assuming we can handle the model.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13444
2023-01-08 18:00:22 +00:00
4d7642a26c
Add number of pulses parameter to pulsed voltage/current sources.
...
Also don't suppress writing "0" valued parameters.
Fixes https://gitlab.com/kicad/code/kicad/issues/13401
Fixes https://gitlab.com/kicad/code/kicad/issues/13402
2023-01-06 13:45:56 +00:00
Wayne Stambaugh
Jeff Young
Ian McInerney
jean-pierre charras
aris-kimi
Alex
Jon Evans
Fabien Corona
Marek Roszko
Graham Keeth
Seth Hillbrand
Stefan Brüns