Move tool works slightly differently from other tools when figuring out
new locations. This uses the global 45 enable flag to set proper item
locations when the user is requesting a 45° constraint on movement
called inside the board editor.
Fix also a broken behavior: the current action was not cancelled, and if it is
called during a move items (when typing the 'T' key), items were broken.
The actual bug is the fact it is called also in fp editor and footprint wizard frame,
because it is part of EDIT_TOOL action list, common to fp editor, and should not.
But a full change is much more costly than just a filter.
Duplicates are reannotated on paste in the same way in pcbnew and
eeschema such that when copying and pasting the same block in the
pcb and schematic, the reference designators will match.
Also removes a bunch of old implementations of pad locking and
filtering which are no longer needed. (They're now handled by the
uniform locking code.)
Also removes some of the auto-promotion logic. Rotating a footprint
when a pad was selected is going to be surprising whether the pad
is locked or not.
Fixes https://gitlab.com/kicad/code/kicad/issues/8322
Use the connecting straight tracks even if not exactly parallel - allow
an error margin configurable in ADVANCED_CFG (default 1 degree). Also
be less strict about end point matching and use the width of the track
as the criteria to determine suitability.
Finally, delete any short lengths of track at the end of the operation
and amend the arc end points to keep connectivity.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7967
It is still possible to move a pad independent of footprint through
the pad properties dialog. This is a much more conscious decision
than using the move tools.
ADDED: "Allow free pads" preference setting in pcbnew, default to off.
When enabled, allows moving unlocked pads independent of the footprint
(i.e. previous behaviour). When disabled (default), any attempt to move
a pad will move the parent footprint instead.
REMOVED: "Lock pads of newly added footprints" preference setting in
pcbnew. (Pad lock state is now loaded from the footprint definition)
CHANGED: There are now only two possible lock states for a footprint:
locked and unlocked. The lock state of the pads in the footprint is
now independent of the footprint lock state.
Also fixed a latent bug that would allow a pad to be moved when the
parent footprint was locked (see m_selectionTool->RequestSelection
lambdas in edit_tool.cpp)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7739
Bitmaps are now identified by an enum class instead of by pointers.
Bitmap loading and caching is now handled by a class in common, and
we no longer compile most bitmaps into the binary, so there is no
longer a bitmaps static library.
Instead, bitmaps are archived to a .tar.gz file which is installed
in ${KICAD_DATA}/resources/images.tar.gz
The source PNGs are checked in to Git as the original CPP files were,
so that people can build without the required dependencies to convert
SVGs to PNGs.
Initial support is also added for dark theme icons, although this
is not yet exposed in the GUI.
Stubs are present for multi-resolution image resources, but this is
not fully-baked yet and could use some refinement.
This simple commit makes the Pcbnew copy to clipboard operation snap the
obtained cursor position to grid before the anchors are calculated. This
is also the way the move operation has been apparently working so far.
To be clear, this will not remove all cases where the copy reference
point is not aligned to the grid (see the linked Gitlab issue for
details about the problem). This will still occur for zone outlines that
are not axis-aligned. But such behavior has been so far also present in
the moving operation, so this may be as designed.
Fixes https://gitlab.com/kicad/code/kicad/issues/7507
Show the dragging tools in the context selection menu when a single
component is selected. Prevent the dragging tools from appearing when
more than one object is selected, as they will not activate anyway.
Fixes https://gitlab.com/kicad/code/kicad/issues/7258
After a rotation or flip the reference point has to be restored to the
previous value to prevent the dragged item from warping to the cursor.
Before this change, the reference point was only cleared, causing odd
behavior when a rotation or flip was performed.
Fixes https://gitlab.com/kicad/code/kicad/issues/7112
Check for footprint editor
Promote pad edits to footprint edits iff
- Pad is locked
- Footprint is not
Otherwise, handle the pad normally and prompt for locked items if found
Prompting to unlock is obtrusive and blocks the common action of
dragging from a pad to align footprints. The less common action of
editing pads in layout can be accomplished after unlocking the pads
Fixes https://gitlab.com/kicad/code/kicad/issues/6997
Our rendering pipeline is not set up for this kind of speed,
and this is a blocking operation at the moment.
Note that we will get an update at the end of the move
because OnModify does it.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6819
CHANGED: If you flip or rotate an item or selection of items, move
the mouse, press 'M' and start moving the mouse, the selection jumps
to where the mouse is. This MR fixes that so it doesn't happen.
This bug was reported against the 5.1.x branch but also affects the
5.99 branch. This MR is for the 5.99 branch.
Fixes https://gitlab.com/kicad/code/kicad/issues/4069
Also removes EditToolSelectionFilter which was misused in more places
than it was used correctly. The original point of the client filter
was to move the logic to the point of use, which the
EditToolSelectionFilter sort of obviated anyway.
Fixes https://gitlab.com/kicad/code/kicad/issues/6751
This unifies everything under a single architecture with a "don't
show again" dialog. Since everything now goes through the same
path it should be reasonably easy to make it do whatever we want
in the future.
Right now it presents 3 options: modify only unlocked items, override
locks and modify all items, or cancel command.
1) Make them easier to select.
2) Mirror text when flipping to other side of board.
3) Flip around a more "known" point (the text position isn't really
here nor there).
Fixes https://gitlab.com/kicad/code/kicad/issues/6219
The Wait() function will return a null TOOL_EVENT when the tool
stack is shutting down, so we can't just always pass the event,
instead we must check for null and end the looping if a null
event appears.
It's only needed in PlaceModule() and creates problems here. Also
adds a comment regarding the encapsulation leak that makes all this
hard to maintain.
Fixes https://gitlab.com/kicad/code/kicad/issues/5932
Also simplifies groups so that other areas of code that have to know
about them at least don't have to know as much. One of the simplifications
is to not worry so much about empty groups until save time; others are in
the access logic to parent groups.
Also simplifies user model slightly by removing Merge and Flatten
(which are just ungroup/group and ungroup/ungroup/.../group).
Also allows multiple groups to have the same name. This is useful when
using groups for a classification system.
Fixes https://gitlab.com/kicad/code/kicad/issues/5788
ADDED memberOf() function for DRC rule expressions.
Also fixes a bug in several of the pickers where the event wasn't
being correctly passed.
Fixes https://gitlab.com/kicad/code/kicad/issues/5647
CHANGED: When moving a footprint, Pcbnew was always warping the mouse
to the origin of the moved object regardless of the state of the "Warp
mouse to origin of moved object" checkbox. This MR now honors the
state of the checkbox when moving footprints.
Fixes https://gitlab.com/kicad/code/kicad/issues/5279
You can now enable and disable snap to grid when drawing/editing across
all apps. You can also tie snap to grid to the visibility of the grid
to allow rapid enable/disable via grid display.
This time remove the push/pop from the picker tools as that's
responsible for the issue of trying to re-activate the move action
when its popped. Instead do the push/pop from the client code
of other actions that need it, and not at all from the move-with-
reference action.
Fixes https://gitlab.com/kicad/code/kicad/issues/5336
The last remaining threaded operation in dynamic ratsnest was the
recalculation of the dynamic connectivity map. Because we do not
require any of the extra features of the connectivity map, we can get
away with a lightweight move of the anchors to update the ratsnest. The
resulting connectivity tree is not valid but it is not needed for the
ratsnest, which only needs a list of nets/anchors.
ADDED new rectangle graphics tool for PCBNew and Footprint Editor.
Also adds rectangle tool to both Footprint Editor and PCBNew Place
menus.
The Aux Origin tool can come back once we have multi-select toobar
buttons.
Also collapses an unnecessary level out of the auxOrigin and gridOrigin
settings.
Fixes https://gitlab.com/kicad/code/kicad/issues/2246
* Consolidate the measure tool into one tool (this gives cvpcb
unit changing and snapping capabilities in its measure tool)
* Transition cvpcb to use actions for the sketch modes
* Replumb how magnetic items settings are stored and used
CHANGED: The reset buttons now set the X or Y offset to the current
offset from the reference position. Selecting individual pads as the reference item is now also possible.
CHANGED: Settings are now stored in versioned sub-directories
ADDED: First-run dialog for migrating settings from a previous version
CHANGED: Settings are now stored as JSON files instead of wxConfig-style INI files
CHANGED: Color settings are now all stored in a separate settings file
CHANGED: The symbol editor and footprint editor now have their own settings files
CHANGED: Color settings are no longer exposed through BOARD object
CHANGED: Page layout editor now uses Eeschema's color scheme
Settings are now managed through a central SETTINGS_MANAGER held by PGM_BASE.
Existing settings will be migrated from the wxConfig format on first run of each application.
Per-application settings are now stored in one class for each application.
Now that the tool framework gracefully shutdowns the tools, graphics
can be created on the stack inside a tool function.
This reverts commit f6881ce3de.
An instance of STATUS_TEXT_POPUP was created on the stack.
But it crashes pcbnew when closing the current main frame,
perhaps due to stack switching in coroutines.
It is now created on the heap.
Default out-of-the-box is no hotkey. Removed all the preference stuff.
Note that the new implementation is a little different: the old one only
operated on a selection with a single item where the new one operates on
all selected items. So if you want the whole track do a 'U' before the 'W'
(or whatever you have Change Track Width assigned to).
Fixes: lp:1844023
* https://bugs.launchpad.net/kicad/+bug/1844023
This adjusts the fix for 1813038 to focus on the duplicate ghost,
preventing the need to unselect/reselect in every cycle. This improves
large move speeds substantially
This is the behavior of previous 5.1 version.
Using the bounding box has advantages, but unfortunately in many cases the footprint position is moved.
If a lot of flip commands are made on the same footprint, it is moved far from its initial position.
When moving a group of items, the allowed snapping layers should be each
layer in the group, not just the first item's LSET.
Fixes: lp:1830164
* https://bugs.launchpad.net/kicad/+bug/1830164
The Get and place tool used to live in selection tool and could activate
the edit tool by stacking calls. Now that it is itself in the edit
tool, we cannot stack another call to the edit tool that runs
immediately, instead we allow the GetAndPlace to finish before beginning
the next tool (Move)
The problem is that wxEVT_CHAR_HOOK doesn’t do the key translation
properly. wxEVT_CHAR does, but we only get to that if we skip the
event at the end of the tool’s event processing loop, which most tools
don’t do. (Selection tools, point editors, pickers, and a couple of
others do skip, which is probably why this didn’t get reported earlier.)
I played around with a couple of ways to fix wxEVT_CHAR_HOOK. Most of
them don’t work, and the few egregious hacks I tried weren't cross-
platform.
So I’m changing it so that most tools now skip at the end of their
event loops. I left out a couple that I felt were high risk (length
tuning, for instance). But there’s still enough risk that I’m 100%
sure it will break something, I just haven’t a clue what.
Fixes: lp:1836903
* https://bugs.launchpad.net/kicad/+bug/1836903
Seth Hillbrand
Jeff Young
jean-pierre charras
Pradeepa Senanayake
Wayne Stambaugh
Roberto Fernandez Bautista
luz paz
Marek Roszko
david-beinder
Ian McInerney
Fabien Corona
Jon Evans
Mikolaj Wielgus
Jonathan Haas
Dominik Wernberger
Michael Kavanagh
PJM
Mario Luzeiro
Qbort
Joshua Redstone
Andrew Downing
Seth Hillbrand