Commit Graph

260 Commits

Author SHA1 Message Date
Jeff Young 37af3adffb Add preference for flip axis.
Fixes: lp:1836267
* https://bugs.launchpad.net/kicad/+bug/1836267
2019-07-14 10:36:48 +01:00
Seth Hillbrand bc26ccf9f2 pcbnew: Correct polygon flipping in custom pads
Custom pads are referenced to the anchor pad 0-point, so flipping the
polygon should be about 0 and not the flip point.

Fixes: lp:1831311
* https://bugs.launchpad.net/kicad/+bug/1831311

(cherry picked from commit 909a25c147)
2019-06-17 15:27:50 -07:00
Jeff Young ce1f35a1be Cleanup some left-over vestiages of the legacy canvas architecture. 2019-06-13 15:51:32 +01:00
Jon Evans cfe588a853 Prevent unbalanced PTH pad labels from being hidden by drills
Fixes: lp:1829067
* https://bugs.launchpad.net/kicad/+bug/1829067

(cherry picked from commit 5230f45658)
2019-05-27 13:06:26 -04:00
Seth Hillbrand 6bcf1839b7 pcbnew: Add arc approximation setting to board
This places the arc approximation setting in the kicad_pcb file and uses
it for all parts of the board rendering where arcs are converted to
segments.  This allows the user to customize their speed vs. accuracy
tradeoff.  The default setting of maximum error of 0.005mm is acceptable
for small boards on moderate systems.
2019-05-24 21:21:06 -07:00
Seth Hillbrand ac435ecd68 Moving further arc approximations down
This corrects an issue with fill segments-per-circle and moves the error
to segmetns calculation down in a number of functions to expose the
single value for approximation
2019-05-22 14:35:17 -07:00
Seth Hillbrand ddc6079ceb Move remaining hard-coded segment counts
This removes the remaining hard-coded segments counts and replaces them
with the relative error calculation where the segments per arc is
determined by the maximum error we allow (smaller arcs = fewer segments)
2019-05-16 08:49:55 -07:00
Jeff Young fd546da640 Homogenize hit testing and selection return types.
Prep work for sharing SCH_SELECTION_TOOL with LibEdit.
2019-05-05 17:14:30 +01:00
Jeff Young 684bb62fd8 Escape slashes in labels and netnames.
Also re-allows spaces, as they can already come in through sheet
names.

Fixes: lp:1798621
* https://bugs.launchpad.net/kicad/+bug/1798621
2019-04-07 00:24:10 +01:00
jean-pierre charras 23086deccd Pcbnew fix: chamfered corners settings not copied with copy/paste pad properties
Fixes: lp:1819595
https://bugs.launchpad.net/kicad/+bug/1819595
2019-03-12 11:28:07 +01:00
jean-pierre charras d259459a14 Pcbnew: add a new primitive pad shape: chamfered round rect pad.
Allows 0 to 4 chamfered corners, not only one.

A custom shape allow this kind of shape. However because it is a primitive,
it is easier to edit and it support thermal reliefs.
2019-03-11 10:26:15 +01:00
Seth Hillbrand 4443487f04 pcbnew: Check GetBoard() before using
GetBoard() may return nullptr in the case of a pad that does not belong
yet to the board.
2019-01-19 19:32:50 -08:00
Seth Hillbrand 5182fe15d3 Minor code formatting 2019-01-17 19:17:34 -08:00
Tomasz Włostowski 9657039af2 pcbnew: multiple fixes concerning track->pad net propagation used by Track/Via properties dialog:
- Added ignore netcode option to CONNECTIVITY_DATA::GetConnectedItems()
- PlaceModule() now ensures the module added to the board (and thus to the connectivity database) has correct bounding box necessary for R-trees to work
- Use recursive connected pad search so that the new net is propagated to all pads

Fixes: lp:1787961
* https://bugs.launchpad.net/kicad/+bug/1787961
2019-01-18 02:53:29 +01:00
Seth Hillbrand e270b5d266 modedit: Mirror custom pads
Fixes mirror command to correctly handle custom pads.

Fixes: lp:1808135
* https://bugs.launchpad.net/kicad/+bug/1808135
2019-01-17 08:55:59 -08:00
Seth Hillbrand c92424898c pcbnew: Replace magic number segment counts
Where we set 32 segments per circle, the magic number is replaced by the
same value as the common define ARC_APPROX_SEGMENTS_COUNT_HIGH_DEF
2019-01-03 17:21:10 -08:00
jean-pierre charras dde933ba08 When printing, pads are not always printed (especially on tech layers)
A printing mode is added, to force ViewGetLOD() to return 0 in printing mode (pads are always drawn)

Fixes: lp:1809528
https://bugs.launchpad.net/kicad/+bug/1809528
2018-12-22 13:44:49 +01:00
Seth Hillbrand 135ff314ca pcbnew: Correct layer naming
Layer bit sets get chosen for the layer name, starting with the copper
layers and then the technicals.  Additionally, multi-layer pads are
appended with an indicator that additional layer bits are set.

Fixes: lp:
* https://bugs.launchpad.net/kicad/+bug/
2018-12-19 20:58:36 -08:00
jean-pierre charras 04aeec1223 Remove useless includes 2018-12-12 15:28:59 +01:00
jean-pierre charras 15fa8f8a22 Minor fixes. 2018-11-03 14:30:34 +01:00
Maciej Suminski 8d73cfef2a Adjusted level-of-detail thresholds for BOARD_ITEMs visibility
Fixes: lp:1801056
* https://bugs.launchpad.net/kicad/+bug/1801056
2018-11-03 00:34:27 +01:00
Seth Hillbrand 9cafe65e84 pcbnew: Allow user-setting rounded rectangle radius
When designing pads, it can be helpful to not only see the resulting
rounded rectangle radius from a given percentage but also to set it,
constraining the related percentage.  This adjusts the dialog to allow
editing the rounded rectangle corner radius.  It does not change the
file format as the resulting ratio is saved.  Further updates of the pad
size or ratio will modify the radius.

Fixes: lp:1668020
* https://bugs.launchpad.net/kicad/+bug/1668020
2018-09-17 15:59:53 -07:00
Jeff Young 2d4ba56ac0 Promote aperture pads to first-class citizens.
Well, almost anyway.  We can't use a pad attribute for them as
that would change the file format.  So they're currently
defined as a CONN pad with no copper layers.

However, when figuring out of existing pads should be *treated*
as aperture pads, we just check for no copper layers.

Fixes: lp:1781760
* https://bugs.launchpad.net/kicad/+bug/1781760
2018-07-24 14:57:45 +01:00
Jeff Young 45e6dfc7af Simplify copy/paste of pad settings.
Fixes: lp:1743141
* https://bugs.launchpad.net/kicad/+bug/1743141

(cherry picked from commit 13ece03)
2018-07-17 15:13:39 +01:00
Jeff Young eacaa39aa2 Remove global units usage from GetSelectionText...
... and GetMsgPanelInfo.

Step 4 in the g_UserUnit eradication effort.

Also removes a couple of conversion routines that were close
enough to extinction.

(cherry picked from commit c75da51)
2018-07-17 15:11:09 +01:00
Jeff Young b99ea159c8 Rationalize select menu texts.
Be consistent with order, formatting, etc.
Remove debug stuff such as zone timestamp and net code.
Clean up misleading pad messages.

(cherry picked from commit 2132109)
2018-07-17 15:09:48 +01:00
jean-pierre charras 93c7f65d96 mask clearance parameters: use clearances only for pads on copper layers, and never for pads on technical layers only. 2018-05-04 14:55:38 +02:00
Andrzej Wolski 370232f70d Do not draw pads on hidden copper layers. 2018-02-21 14:18:51 -05:00
Andrzej Wolski 4c19606eb7 Fix pads and footprints rendering switches behavior
Pads and footprints rendering switches in Render tab were working incorrectly, as described in bug report:
https://bugs.launchpad.net/kicad/+bug/1743890

This patch fixes it and makes GAL behave as the legacy canvas.

Fixes: lp:1743890
2018-02-21 13:44:52 -05:00
Jeff Young 60a4ce6623 Don't let pads that *should* be NPTHs get lost.
Borrow the hidden text colour so that they can be distinguished
from PTHs and correctly-marked NPTHs.

Fixes: lp:1494738
* https://bugs.launchpad.net/kicad/+bug/1494738
2018-02-08 15:04:23 -05:00
jean-pierre charras 5d72aebd22 Fix code after renaming files 2018-01-29 16:40:22 +01:00
jean-pierre charras 1db14d44b7 Better calculation of polygon clearance area of oval pads. Wip. 2018-01-20 19:34:50 +01:00
jean-pierre charras 68268973b7 To avoid mistakes between graphic layers for pads, holes and not plated holes, rename 3 GAL_LAYER_ID names:
LAYER_NON_PLATED to LAYER_NON_PLATEDHOLES
LAYER_PADS_HOLES to LAYER_PADS_PLATEDHOLES
LAYER_PADS to LAYER_PADS_TH
and add comments and fix a render issue in gal mode for non plated holes.
2017-11-29 09:48:41 +01:00
Tomasz Włostowski 0245912c34 refactoring: split BOARD_ITEM::SwapData to use polymorphic per-item methods 2017-11-03 20:02:06 +01:00
jean-pierre charras 7418deb454 Pcbnew: fix issues with 360 deg angle arcs.
Fixes: lp:1725943
https://bugs.launchpad.net/kicad/+bug/1725943
2017-10-23 15:35:03 +02:00
jean-pierre charras a43f3ab1fe replace "BasicShape" by "Primitive" in code, a better name 2017-09-20 12:51:10 +02:00
Maciej Suminski cca63801bf Renamed D_PAD::{Set,Get}PadName() to D_PAD::{Set,Get}Name() 2017-09-19 18:23:50 +02:00
Maciej Suminski 85be485c34 Enable long names for pin numbers and pads
- pad names are stored as wxString instead of a char[4] & integer union
- removed pad name to string conversion functions
- fixed pad & pin properties dialog restrictions regarding the name
length
2017-09-19 18:19:49 +02:00
jean-pierre charras e2d3fcec02 Add support for custom pad shape. Full support in DRC and PnS.
add option to use shape or convex hull as clearance area in zones.
simplify code to handle clearance area
2017-09-19 09:02:53 +02:00
Tomasz Włostowski c4c329e393 Connectivity: local ratsnest for both legacy & GAL. Further removal of legacy code 2017-06-23 11:12:37 +02:00
Maciej Suminski b71fc5564a Code formatting fixes 2017-05-10 11:40:49 +02:00
Oliver Walters e29abd6204 HitTest for trapezoid pad 2017-05-10 10:57:28 +02:00
Oliver Walters 7cfc882448 HitTest for RoundRect pad 2017-05-10 10:57:28 +02:00
Oliver Walters 8caef05ad6 HitTest for Oval pads
HitTest for Oval pads

Required fix for GetBoundingBox method for Oval Pad shape
2017-05-10 10:57:28 +02:00
Oliver Walters f338d46476 HitTest for Rectangular pads
HitTest for Rectangular pads

- Works at any rotation, even with Shape Offset
- Fixed bugs in D_PAD BoundingBox calculation
2017-05-10 10:57:28 +02:00
Oliver Walters a0afcd5a62 HitTest for pads
- Circular pads
2017-05-10 10:57:28 +02:00
Jon Evans 3ec28e2acf Refactor layer enumerations to all live in the same place 2017-03-30 16:01:48 -04:00
John Beard a8eea6155a Move bitmaps.h out of base_struct.h
bitmaps.h was included in nearly every file in the project due to it
being included by base_struct.h

Only about 130 files actually use the XPM definitions defined there, and
many of those already included bitmaps.h themselves, or via
menu_helpers.h. However, touching bitmaps.h would result in over 400
rebuilt files for pcbnew alone.

This commit moves the bitmap-related types like BITMAT_DEF out to a new
header, which is still included by base_struct.h, which is less
avoidable for now, it's it's used in the interface.

The icon list is still in bitmaps.h. This has the side effect that's
it's now easier to automatically generate this file.

Many classes in pcbnew and eeschema needed some functions moved
to the implementaitons from the headers too.
2017-02-21 09:50:15 -05:00
Maciej Suminski 092c61e021 More robust condition to avoid division by 0 in D_PAD::ViewGetLOD() 2017-02-11 09:18:56 +01:00
jean-pierre charras dd5b024903 Pad export/import settings functions: remove duplicate code. 2017-02-10 20:44:35 +01:00