4d18496a6f
hosted: Allow to disable high level commands for BMP.
...
Useful for tracking low level problems on native with hosted.
2020-10-01 15:49:21 +02:00
014abf6cc9
adiv5.c: Reduce number of errors if reading cidr fails.
2020-10-01 15:33:28 +02:00
be40d2b851
adiv5: Check Debug Base Address early
...
Reduces printout when scanning the romtable
2020-10-01 15:22:17 +02:00
747336e927
f4discovery: Slow done JTAG pin slew rate to avoid ringing #742
2020-10-01 15:06:16 +02:00
38bc5bbf82
Add LPC546xx support #741 #553
2020-09-30 12:56:53 +02:00
2fdd94adeb
STM32F7: Add another missing Arch ID.
2020-09-24 16:20:34 +02:00
0ae65cc10f
src/Makefile: Fix version.h generation.
...
It seems, some git behaviour change got by unnoticed.
2020-09-22 19:02:26 +02:00
61d919c1ac
libftdi: Remove no longer needed workaround for travis CI.
2020-09-20 14:10:37 +02:00
77231e8972
serial_no: Fix error with "mon trace" #732
...
launchpad-icdi: Allow to set a serial number with make
2020-09-20 13:23:52 +02:00
bdb351a6ea
adiv5_swdp: On ACK_FAULT, error() and try again once #731
...
when writing CSW.
2020-09-18 20:07:32 +02:00
a4a934f461
Add comments for hardware revision of v2.1
2020-09-17 11:54:19 +02:00
75b5e72a00
Fix typo
2020-09-16 18:41:56 +02:00
de01a75ca9
Fix broken link to bluepill pinout.
2020-09-15 20:58:10 +02:00
6d18a61b2e
hosted: Make ASAN build optional.
...
Use ASAN=1 on the make command line to activate,
2020-09-11 15:23:13 +02:00
120b3134bb
Add SAM4SD32C/B support.
2020-09-07 17:36:15 +02:00
8289862b55
gdb: Reset flash_mode with when erase or flash fails.
...
Thanks to Dave Marples <dave@marples.net>, extracted from #607
2020-09-04 15:17:29 +02:00
58281ec232
SWD Timing: Enhance SWD high time with low speed loss.
...
On F103 no high time < 80 ns and no low time < 100 ns was seen with a scope
2020-09-04 14:45:34 +02:00
af3480e523
hosted: Update Readme.md
2020-09-04 11:49:13 +02:00
6650831243
ftdi: Get turtelizer (JTAG only FT2232D dongle) going
...
FT2232D seems to dislike "Set TCK/SK Divisor" or
"Set Data Bits Low Byte" as first command on a non-first run
- Add printout when garbage is found
- Add "Disconnect TDI to TDO for Loopback" as first MPSSE command
(seemed to help!)
2020-09-04 11:49:13 +02:00
74b3baad1e
ftdi_bmp : Another size fix and small rearrangement.
2020-09-04 11:49:13 +02:00
aeb97466b9
libftdi: Automatically switch to JTAG if SWD is not possible.
2020-09-04 11:49:13 +02:00
ae8cb8ab46
ftdi_bmp: Reject writes with no data.
...
Pending transfers made the MPSSE behaviour strange and unpredictable.
2020-09-04 11:49:13 +02:00
c41ab1738e
ftdi/swdptap: Use parity builtin. Fix array width.
2020-09-04 11:49:13 +02:00
34d0f8a2a1
ftdi: Recognize bitbang SWDIO settings.
2020-09-04 11:49:13 +02:00
6ac0a25123
ftdi: Add UM232H as probe.
2020-09-04 11:49:13 +02:00
d73a6a3d29
platform/ftdi: Do not double initialize.
2020-09-04 11:49:13 +02:00
f0b0639189
ftdi: Output wire debug.
2020-09-04 11:49:13 +02:00
e95e5e3fba
ftdijtag: Really enable TMS/TCK/TDI driver.
2020-09-04 11:49:13 +02:00
f4eed249eb
hosted/ftdi: Allow to list supported cables.
2020-09-04 11:49:13 +02:00
8a2bce26f2
Hosted: Fix memory leak when platform_swdptap_init fails.
2020-09-04 11:49:13 +02:00
7b497302c0
hosted/ftdi: Autodetect ftdi cables with distinguishing feature.
2020-09-04 11:49:13 +02:00
a83e76bef9
libftdi: Add USBMATE.
2020-09-04 11:49:13 +02:00
c78066255d
libftdi: Infrastructure to test for target voltage present.
2020-09-04 11:49:13 +02:00
aff624b6e0
libftfdi: Allow to specify external resistor SWD connection.
...
More explanations in src/platforms/hosted/Readme.md
2020-09-04 11:49:13 +02:00
eabf45357d
libftdi: Reinitialize pins when switching JTAG/SWD.
2020-09-04 11:49:13 +02:00
05534e9b49
libftdi/swdptap: Provide SWD using generic MPSSE if hardware allows.
2020-09-04 11:49:13 +02:00
40ba261982
libftdi: Use asynchronous transfers if header indicate newer libftdi1.
...
This is a hack to keep travis happy. Setting up travis to use a recent
libftdi1 is a major issue.
2020-09-04 11:49:13 +02:00
9b6e19785e
Implement SRST for libftdi.
...
Travis GCC needs -Wno-missing-field-initializers or will otherwise warn.
2020-09-04 11:49:13 +02:00
dea4be2539
Add ifdef to check for libftdi 1.5 to use ftdi_tcioflush instead of ftdi_usb_purge_buffers
2020-08-21 13:10:55 +02:00
7e1b0321e2
Cleanup Makefiles for hosted bmp on darwin
2020-08-21 11:28:17 +02:00
5908fc2da1
Add serial auto-connection to darwin target
2020-08-21 11:28:17 +02:00
e75eb19d78
cmsis_dap: Detect CMSIS-DAP before STLINK
...
Debugger may be realized with the ST USB Vendor ID.
2020-08-16 15:20:58 +02:00
998a9747f8
cmsis_dap: Make some errors more prominent.
2020-08-16 15:20:58 +02:00
c97c4a0960
hosted: Better decoding for ap_decode_access().
2020-08-16 15:20:58 +02:00
badff20099
cmsis_dap.c: Fix dap_dp_read_reg.
2020-08-16 15:20:58 +02:00
f65afb1588
Use correct IAP entry address for LPC84x
2020-08-14 20:00:18 +02:00
dd74ec8e6f
stlinkv2: Detect fail mem_read on jtag too.
2020-08-05 16:20:52 +02:00
805cfbdcb5
Build hosted for widows with hidapi static linked.
2020-08-03 18:59:50 +02:00
fca8593d92
serial_win: Find BMP comport by serial number.
2020-08-03 18:59:50 +02:00
3eb51ce94f
serial_win.c: Copy the enough of the device name.
2020-08-01 14:00:17 +02:00
11217f8a45
serial_win: GDB needs to handle DTR.
2020-08-01 14:00:17 +02:00
71e9d78210
adiv5.c: Add another ARCH_ID found STM32F205.
2020-08-01 14:00:17 +02:00
1b12e407fd
adiv5: Add missing arch identifiers for Cortex-M7 ETM.
2020-07-31 11:53:15 +02:00
71e5b4d3cb
hosted/stlinkv2.c: Fix bug introduced with #703
2020-07-29 13:42:07 +02:00
72387164eb
hosted/stlinkv2.c: Handle AP_WAIT error when switching to SWD
2020-07-29 12:22:18 +02:00
a392480631
hosted/stlinkv2.c: Use V2 API to read coreid.
2020-07-29 12:22:18 +02:00
696daa8352
adiv5: fix debug print of dev_type
...
Since dev_type is an 8 bit unsigned integer, use the PRIx8 macro instead
of PRIx32.
2020-07-29 11:32:24 +02:00
64cf30e4cd
Rework/update/add Readme.md in the platforms directories.
2020-07-29 10:32:49 +02:00
726d4b4496
adiv5.c: Add missing DEVTYPE and ARCHID to some existing PIDRs(#698,#699)
...
Probably more additions are needed.
2020-07-14 16:26:32 +02:00
52bfe538e3
cdcacm.c: Set bMaxPacketSize0 to 32 ( #693 , #697 )
...
Smaller bMaxPacketSize0 resulted in delayed enumeration when BMP firmware
is started by the STLink bootloader.
2020-07-14 15:57:03 +02:00
09ceaea70f
adiv5_swdp: Fix another memory leak.
2020-07-14 15:02:13 +02:00
2ae62433d2
Merge pull request #690 from themadinventor/arm_v8m
...
Add ROM table support for Cortex-M33 and Cortex-M23
2020-07-13 10:56:03 +02:00
a673efc26b
Remove extra definitions of jtag structures in the STLink hosted setup to support "gcc (GCC) 10.1.0" on Archlinux
2020-07-12 23:14:19 +02:00
7ebb94d134
cortexm: Add comment on CPUID register
2020-07-12 22:54:39 +02:00
4391851f4d
adiv5: Change component descriptions from MTB to Micro Trace Buffer for consistency
2020-07-12 22:29:04 +02:00
0aadd0abce
Adiv6: Add comment on DEVTYPE and ARCHID fields with references
2020-07-12 22:27:46 +02:00
fcd945a529
cortexm: Read CPUID to identify core version
2020-07-12 12:08:22 +02:00
39a20d78ff
v8m: only check relevant bits in DHCSR when polling in cortexm_forced_halt
2020-07-12 12:07:12 +02:00
a35e9c8e5c
Adiv6: Read DEVTYPE and ARCHID to identify Cortex-M23 and Cortex-M33 debug components
2020-07-12 12:00:31 +02:00
661f78033a
stm32f1: Add F1 XL with dual bank handling,
2020-07-08 14:31:58 +02:00
fc6ca5bc06
Remote: Add procedure to test if high-level remote functions are available
...
Removes need for updated version string.
2020-07-08 14:15:35 +02:00
bfda64c656
stlink: Remove unused double defined variable "running_status"( #683 )
2020-07-02 19:44:31 +02:00
85d35b75ce
libftdi/jtagtap_tdi_tdo_seq: Remove dubious Null termination.
2020-07-02 14:56:10 +02:00
a4cdd6b310
hosted: Report missing USB access rights only if no debugger found.
2020-06-07 16:29:19 +02:00
eabd69dcdb
Adiv5: Protect DBG/SYSTEM Power-Up request with timeout too.
...
CMSIS-DAP without connected target looped infinite in that situation.
2020-06-07 13:14:32 +02:00
e35025d214
CMSIS_DAP: Warn when hidapi-libusb is not found.
2020-06-06 15:28:53 +02:00
5097a23196
jlink: Fix wrong sized array.
2020-06-06 15:28:53 +02:00
4ede113ca7
hydrabus: Disable DFU file generation untit somebody fixes dfu-convert.py
...
This allows "make all_platforms" to succeed on python3 only systems.
2020-06-05 16:23:28 +02:00
aabd07738e
cl_utils: Use start of flash in memory map as default flash start.
2020-06-05 14:59:30 +02:00
425002a38f
hosted: Add -l argument to list only available debuggers and exit.
2020-06-05 14:59:30 +02:00
dc3fd2eb06
Classify debug messages
...
Firmware BMP with ENABLE_DEBUG=1 will print WARN and INFO as before.
PC-Hosted BMPwill alway print to stderr. Warn is printed unconditional,
INFO, GDB, TARGET, DONGLE and WIRE will print if their appropriate bit in
cl_debuglevel is set via the -v verbose command line argument.
INFO will go to stdout with -t or -l.
2020-06-05 14:59:30 +02:00
9ade8b24f7
hosted: Add Readme.md
2020-06-05 14:59:30 +02:00
4698a26bab
common/swdptap: Slight speed increase and better setup time for write.
2020-06-05 14:59:30 +02:00
64f3dff8a8
PC-Hosted: Better debug output.
2020-06-05 14:59:30 +02:00
b06c0ba8d5
bmp_remote: Use high level functions.
...
Based on #570 (OpenOCD HLA interface driver for Blackmagic), but now
usefull for bmp-remote.
2020-06-05 14:59:30 +02:00
921c23eb74
serial_unix: Return instead of exit in case of error.
2020-06-05 14:59:30 +02:00
ef558eebb8
CMSIS-DAP support.
...
Thanks to edbg, pyocd and openocd for code and ideas.
2020-06-05 14:59:30 +02:00
4ba6afed28
Add jlink pc-hosted platform.
2020-06-05 14:59:30 +02:00
efce2ae892
Do not compile jtagtap and swdptap when not needed.
2020-06-05 14:59:30 +02:00
da45281696
GetTargetVoltage: Print info about voltage only when info is relevant.
2020-06-05 14:59:30 +02:00
ef816e3183
hosted: add libftdi implementation, remove old implementation.
2020-06-05 14:59:30 +02:00
ab7991c3a6
hosted: Add bmp_remote, remove old pc-hosted platform.
2020-06-05 14:59:30 +02:00
13c3c934d2
Hosted: Add Stlink, remove old pc-stlinkv2 platform
2020-06-05 14:59:30 +02:00
09602a9e74
serial_unix: Simplify timeout setting.
2020-06-05 14:59:30 +02:00
8fea3f6baa
pc/serial_xx: Change arguments for the open call.
2020-06-05 14:59:30 +02:00
a09104c281
Build firmware executables as *.elf file
2020-06-05 14:59:30 +02:00
dd022fcb44
platforms/pc: Add common usb utilities.
2020-06-05 14:59:30 +02:00
52739def01
Copy relevant stlink files.
2020-06-05 14:59:30 +02:00
386a4bfce7
hosted: Device detection and selection.
2020-06-05 14:59:30 +02:00
3290def5f8
Add empty compilable project.
2020-06-05 14:59:30 +02:00
Uwe Bonnes
Eivind Alexander Bergem
jxltom
Raghu
Damien Merenne
Matthew Skolaut
David Lawrence
Francesco Valla
Aled Cuda
Fredrik Ahlberg
Valmantas Paliksa