039bf14761
rtt: Cleanup and fixes for the RTT over serial support as per #954
2022-05-31 22:24:59 -04:00
233a83a702
hosted/ftdi: Add more adaptors - ESP-Prog, Tigard, Hifive1 and ARM-USB-TINY-H
2022-05-31 21:37:38 -04:00
d2ed681921
hosted/ftdi: Fix detect devices w/o genuine description but with given cable
2022-05-31 21:37:20 -04:00
c80f311cb4
pc/serial_unix: (hosted) Abort on unexpected problems.
2022-05-31 21:37:20 -04:00
0a0f5a9dd7
rtt
2022-05-31 21:15:41 -04:00
738ac96e57
Add 96Boards Carbon as a probe host
...
The carbon contains two SoCs, an STM32 (host) and an nRF51 (BLE). The
STM32 implements the probe and allows the board to reprogram its own
radio firmware!
2022-05-31 20:59:17 -04:00
5e3cadec20
Updated Copyright and Vendor strings to Black Magic Debug.
...
The project is not part of Black Sphere Technologies any more. It was
renamed to Black Magic Debug instead.
2022-05-30 15:09:55 -07:00
84311b3888
docs: Corrected org in links to blackmagic-debug
2022-05-30 14:32:36 -07:00
29dc94c3d6
hosted: with mubes help, fixes some issues with how we talk CMSIS-DAP
2022-05-17 15:46:33 -07:00
c4869a5473
hosted/stlinkv2: Cleaned up the new error messages as they weren't outputting nicely
2022-04-16 18:22:14 -04:00
a27661cd0b
hosted/platform: Formatting consistency improvements
2022-04-16 18:22:14 -04:00
ba8ed132a8
hosted/stlinkv2: Fix !found causing hosted to continue on anyway, and improved the error reporting from the device finder loop
2022-04-16 18:22:14 -04:00
4287f1ba0e
hosted/stlinkv2: Rewrote the serial number readering logic to not violate the USB spec and properly handle libusb errors
2022-04-16 18:22:14 -04:00
94e9281404
hosted/bmp_libusb: Rewrote the string reader logic to not violate the USB spec and properly handle libusb errors
2022-04-16 18:22:14 -04:00
c7eba0a439
hosted/bmp_libusb: Fixed some signed/unsigned issues and UB in send_recv
2022-04-16 18:22:14 -04:00
c5dbf851f6
hosted/bmp_libusb: Formatting cleanup
2022-04-16 18:22:14 -04:00
9007c40954
revert temp patch on platform.h
2022-03-22 10:10:33 -04:00
82c41cb739
add putpacket2 to send two sub messages merged as one
2022-03-22 10:10:33 -04:00
48c6db1963
Remove duplicate definition of USBUSART_DMA_TX_ISR
2022-03-22 10:02:52 -04:00
e82d4f2eda
native: Fixes an hw version issue with some older BMP.
...
The BMP with hardware version 4 and newer, use option bytes instead of
physical GPIO to encode the hardware version. In some older BMP there is
a chance that the user option byte is set to 255 (0x00FF pattern). This
can throw off the hardware version detection routine.
2022-03-15 23:45:32 -07:00
bcba3ee4a9
native: Fixed hw6 USBUSART support.
2022-03-15 23:45:32 -07:00
06f24d3269
native: Added blocks to the ISR templates.
2022-03-15 23:45:32 -07:00
bb761e4b38
native: Initial addition of hw 6 support.
2022-03-15 23:45:32 -07:00
2d63021344
native: Improved pinout legend comment block.
2022-03-15 23:45:32 -07:00
e7982d594e
native: Added HW5 AUX interface definitions.
2022-03-15 23:45:32 -07:00
655014ac9c
native: hw rev 5 has the usb vbus sense pin on PA15.
...
We had to move the pin to free up the SPI SCLK pin.
2022-03-15 23:45:32 -07:00
9ffa923bc1
native: Update hwversion detection for hw rev 4 and newer.
...
The hw rev 4 and 5 both have the version stored in the Data1 user option
byte. This frees up the hw rev strapping pins for other uses, ie swtrace
decoding using USART1 RX, and additional peripherals on the SPI bus,
like bulk flash storage and displays.
2022-03-15 23:45:32 -07:00
361dc9c234
Revert "adiv5_swdp_scan: If SWD scan fails, try a JTAG scan."
...
This reverts commit 3df692ecb2
2022-03-14 21:37:44 -07:00
54f577a970
hosted/dap: Partial revert of 5c8e277, taking into account that division may not be available on platforms 'hosted' might see itself built
2022-03-14 21:37:44 -07:00
d1c9d94174
jtag_scan: Remove the now redundant IDCode parameter from the handlers
2022-03-14 21:37:44 -07:00
7d2afcff06
Revert "jtag: Make jtag_devs argument to jtag_handler."
...
This reverts commit 6308506276
2022-03-14 21:37:44 -07:00
02d9a1d3cf
Revert "jtag_scan: Rework chain detection"
...
This reverts commit 2d4a503135
2022-03-14 21:37:44 -07:00
ca9d8cd0ae
scripts: fix dfu-convert.py for Python 3 and drop Python 2 support
2022-02-13 15:31:12 -08:00
ed156076a2
swlink README: correct SWO/RX2 header location for blue pill
2022-01-30 11:48:12 +01:00
6a9b2b8224
hosted/ftdi: Fix bad length calculation in MPSSE case of swdptap_seq_in()
2022-01-25 11:40:55 -05:00
266fe17461
bmp_libusb: Restrict scope of variable
2022-01-25 11:40:55 -05:00
e3804183f7
bmp_libusb: Fix crash with FTDI devices as outdated variable was used.
...
Triggered by 7b1eb6e6e3
2022-01-25 11:40:55 -05:00
b1ed55a18f
hosted/firmware/jtag: Fix unhandled exception introduced with da15cc3cb7.
...
Write in endianess independant way.
2022-01-22 23:46:52 -08:00
3f28e728e9
cdcacm: Lower usage of magic numbers.
2021-12-18 21:44:18 -08:00
98e3858f7c
bmp_libusb: Exclude Wireless class too.
2021-11-23 20:54:59 +01:00
bb4151377f
type of ‘assert’ defaults to ‘int’
2021-11-22 19:51:10 +01:00
b4ac52d1f5
Hosted monitor command allowed as preliminary command
2021-11-15 21:20:38 +01:00
71b67beb98
Fix: assert flashing succeeded or failed (hosted) once the last buffer has been written
2021-11-15 21:19:08 +01:00
1d0e45bdbb
cmsis_dap: Transfersize of block commands needs to cope with word.
...
Checkme: Dragonprobe bulk hangs on transfers with 15 words.
2021-11-02 18:17:12 +01:00
8970160f1d
cmsis_dap: Timeout and start of error handling for bulk transfers.
2021-11-02 18:17:12 +01:00
2bc2db1140
cmsis_da: Add timeout to bulk commands.
2021-11-02 18:17:12 +01:00
a4caec29b9
dap_swdptap_seq_out: Write only needed data
...
Dragonprobe (origin/cmsisdap-fixes, 211031) hanged on additional byes in the
SWJ_Sequence request.
2021-11-02 18:17:03 +01:00
07b4e5726e
CMSIS-DAP: Run time detect DAP_SWD_SEQUENCE
...
Some dongles in the making like orbtrace may not yet support.
2021-10-31 12:55:41 +01:00
88e44d1c12
cmsis: use exception in wait_word().
2021-10-31 12:55:41 +01:00
a1d4649795
SWD: Use dp_low_write to allow multidrop scan.
2021-10-31 12:55:41 +01:00
4f36c1ddf8
Remove dp_low_read() and use exception protected dp_read()
2021-10-31 12:55:41 +01:00
f9d343af3e
cmsis: AP reads are posted. Read from RDBUFF.
2021-10-31 12:55:41 +01:00
d4ae308f9f
cmsis: implement srst_set_val()
2021-10-31 12:55:41 +01:00
166eb3ee3e
cmsis_dap: Always transfer 65 bytes with hid_read|write()
...
CMSIS-DAP Dragonprobe works on some devices. E.g. it does not work
on NUCLEO-F103
2021-10-31 12:55:41 +01:00
b343ebe06f
cmsis-dap/linux: Link against libhidapi-hidraw
...
libhidapi-libusb detaches a kernel module but does not reattach again.
This may wrack interaction with other programs using hidapi.
2021-10-31 12:55:41 +01:00
761e0230d4
cmsis-dap: Print messages when transfers fail.
...
Expect signal integrity errors when using jumper cables. Often probes switch
the SWJ GPIO with highest speed, resulting in possible reflections. Additional
ground wires may help. If there is isolation between probe and targets,
additional ground wires are a must or ground shift will wrack the transfer!
2021-10-31 12:55:41 +01:00
39fbffd3d2
stlinkv2: Fix low access to AP registers.
2021-10-31 12:55:41 +01:00
c13778139f
adiv5/hosted: Export the BMP_TYPE in DP.
2021-10-31 12:55:41 +01:00
485105221e
dap: Always work on a copy of the buffer when calling dbg_dap_cmd() in a loop
...
A better solution would use seperate buffers for dbg_dap_cmd. But as WAIT is
already handled in DAP, cahnces are low that loop re-entry is needed.
2021-10-31 12:55:41 +01:00
397fbd5749
cmsis: Only cmsis internal use must differentiate between HID and Bulk access
...
Missing DAP_SWD_SEQUENCE may eventually need a distinction visible from
outside later.
2021-10-31 12:55:41 +01:00
7b1eb6e6e3
bmp_libusb: reset type on every device.
2021-10-31 12:53:47 +01:00
80064c18a9
bmp_libusb: Fix CMSIS-DAP related memory leak.
2021-10-31 11:13:34 +01:00
c4b6b42dcf
stlinkv2: Read targetid on DPv2 devices.
2021-10-31 11:13:34 +01:00
e7e1bfdb53
mpsse: Fix using 60 MHz clock on fast devices.
2021-10-30 13:55:57 +02:00
99a5fdb6f8
bmp_remote: Better error propagation.
...
Negative values from platform_buffer_read are errors too!
2021-10-30 13:55:57 +02:00
f4117aa1b4
cdcacm: Use the USB strings.
2021-10-30 13:55:57 +02:00
f28f05952f
stlink: Add another STLINK-V3 ID.
2021-10-30 13:55:57 +02:00
e1a928beb1
Fixes to compile with gcc11 #925
...
Target code changes are pure for formal correctness and not tested!
2021-10-10 15:59:57 +02:00
e2d3161442
Removed -S message as debugger selection option since it is used for reading bytes
2021-10-09 21:38:48 +02:00
59282b6f66
Fixed typography
2021-10-09 21:18:52 +02:00
7274f55ff4
Fixed return value of hosted blackmagic in erase mode
2021-10-09 21:17:58 +02:00
3f54fba986
HOSTED_BMP_ONLY=0 by default on Linux.
...
The user is warned about missing dependencies.
2021-10-09 21:14:52 +02:00
7ccbdd98c0
hosted/dap: Copy command buffer in wait/retry loop.
...
The same buffer is used for both command and response, causing part of
the command to be overwritten before it’s retried. Solve this by saving
and restoring a copy of the command before retrying.
2021-10-05 23:21:07 +02:00
f69f29a660
f4discovery/blackpill: fix usbusart
2021-10-01 00:10:03 +02:00
554e34517e
Better reporting when monitor command fails.
2021-09-22 21:41:43 +02:00
64f756d627
Test voltage on VREF before enabling target power (mon tpwr), to avoid potential power conflict.
2021-09-22 20:45:18 +02:00
356325f563
ftdi_bmp: Fix bit select.
2021-09-22 15:16:20 +02:00
79066c950f
bmp_libusb: Remove duplicated libusb_init.
...
Thanks to Red Liu for noticing
2021-09-22 15:16:20 +02:00
da15cc3cb7
remote_jtagtap: Fix memory corruption in jtagtap_tdi_tdo_seq
2021-09-22 15:16:20 +02:00
a93e57e112
ftdi: Fixed wrong direction report in DEBUG.
2021-09-22 15:16:20 +02:00
01583560cd
hosted: Update Readme.md to use HOSTED_BMP_ONLY
2021-09-16 11:02:31 +02:00
ff79108f66
cl_utils: Increase worksize for increased speed.
...
H743 reads 2 MB in ~23 vs 27 seconds
2021-09-07 10:57:17 +02:00
a76a559656
pc/platform_delay: Wait ms and not us!
2021-09-07 10:57:17 +02:00
a297c8c8ad
hosted/Makefile.inc: Use gcc to build hosted, if not advised otherwise
2021-09-04 21:15:07 +02:00
698cfeb1f4
bmp_serial: Nag MACOS programmer to implement find_debuggers!
2021-09-04 21:15:07 +02:00
49122b50b6
hosted: Make HOSTED_BMP_ONLY the default.
...
Hopefully more people will use it when reporting errors!
2021-08-15 16:43:29 +02:00
2fcd4a878a
ftdi_bmp.h: Fix error when compiling with HOSTED_BMP_ONLY=1
2021-08-15 16:43:29 +02:00
6308506276
jtag: Make jtag_devs argument to jtag_handler.
2021-08-15 16:43:29 +02:00
f7670fcd44
ftdi_bmp: Add verbosity for libftdi_jtagtap_tdi_tdo_seq()
2021-08-15 16:43:29 +02:00
3df692ecb2
adiv5_swdp_scan: If SWD scan fails, try a JTAG scan.
2021-08-15 16:43:29 +02:00
5c8e277663
hosted/dap: Fix tdi_tdo_seq.
2021-08-15 16:43:29 +02:00
2d4a503135
jtag_scan: Rework chain detection
...
Fixme: stlinkv2/hosted probably does only handle STM devices. Check if
jtag_devs.c really needed.
2021-08-15 16:43:29 +02:00
e1a1865de9
remote/jtagtap_tdi_tdo_seq: Split up large transactions.
...
FIXME: One remote transaction still can only do up to 64 ticks, leaving
room for speed enhancement with larger transactions.
Firmware assumes (1LL << 65) == 0LL !
2021-08-15 16:43:29 +02:00
8084a75634
cl_utils: Allow Hardware reset from the command line
2021-08-15 16:43:29 +02:00
36836d0746
ftdi_bmp: Fix setting bits and FTDIJTAG srst.
2021-08-15 16:43:29 +02:00
cfdf55855e
ftdi_bmp: Export and use reset functions.
2021-08-15 16:43:29 +02:00
5eb43a1ddb
platforms: stm32f4x1 blackpillv2 as variant of f4discovery
...
Compile as make PROBE_HOST=f4discovery BLACKPILL=1
2021-08-13 16:18:05 +02:00
6d6a67b44b
timeout: Make sure we wait at least the period requested ( #900 , #902 )
...
Fixes bug introduced with last commit( Recover from bad AP access)
Let STM32 timers run at 100 Hz against 10 Hz before.
Programming STM32F103 failed random (#900 ) with 20 ms timeout requested
against the 100 ms timeout granularity provided up to now.
STM32 Firmware only ticked at 10 hertz, so the sequence "low_access",
"set timeout", "send out 8 bit command", "read 3 bit result" when
reading "wait" and timer increment tick happening during that sequence
will already hits the timeout even so only mininal time has elapsed
and not the requested timeout.
2021-07-27 10:59:03 +02:00
b887a8d355
stm32: Portability changes
...
Allow to compile on STM32F0 platform too.
2021-07-15 15:06:54 +02:00
3cfd8226ba
bmp_libusb: Check only for cmsis_dap if no cable has been found yet.
2021-06-18 11:44:50 +02:00
dragonmux
Uwe Bonnes
Koen De Vleeschauwer
Daniel Thompson
Piotr Esden-Tempski
mean
Mike Ditto
Nicolas Schodet
Paul Mulders
fabalthazar
Vegard Storheil Eriksen
Jeff Lutgen
Thiadmer Riemersma
Andy Makovec
aam335