8903026c14
jlink/swd: swd frequency is fixed, not need to set.
2020-11-29 15:48:50 +01:00
3b6432912d
jlink: Catch another error with no target connected.
2020-11-29 15:48:50 +01:00
7df314e265
Firmware/Jlink: Fix double free when debug power-up fails ( #780 )
2020-11-29 15:48:50 +01:00
e1329499de
platform_adiv5_swdp_scan: Do not double free with early errors.
...
adiv5_dp_init() clean up itself if errors happen
2020-11-29 15:48:50 +01:00
bf548e92c0
swd: After write low_access, always append 8 clk to move data through SW-DP.
...
Especially needed when leaving the debugger or during debug unit power-up.
ARM Debug Interface Architecture Specification ADIv5.0 to ADIv5.2
tells to clock the data through SW-DP to either :
- immediate start a new transaction
- continue to drive idle cycles
- or clock at least 8 idle cycles
Implement last option to favour correctness over slight speed decrease
Implement only for adapters where we assemble the seq_out_parity in our code,
as on firmware, ftdi and jlink. Hopefully the high level adapters do it right.
Reverts 2c33cde63fcde7726b87
2020-11-27 22:26:48 +01:00
139e5d7e22
f4discovery: Compile time option to compile with ST bootloader
...
Just to keep things active. Prepare for F72 bootloader.
2020-11-27 22:26:48 +01:00
636bcee355
stlink/swlink: Remove the DFU upgrade utility.
...
Hopefully no old bootloaders are around. If otherwise, revert to last
commit before this and update the DFU bootloader.
2020-11-27 22:26:48 +01:00
27ef4569ca
stm32/dfucore.c: Use libopencm3 provided defines and functions.
2020-11-27 22:26:48 +01:00
9d55128ab8
cl_utils: Get voltage only once.
2020-11-27 22:26:48 +01:00
e6823f39de
Hosted: Print version with "-h" and "-t" option.
2020-11-27 22:26:48 +01:00
62d9f60f03
hosted/firmware: Waits for read response as long as cortexm_wait_timeout.
2020-11-27 22:26:48 +01:00
26a23dd1cb
stlinkv2: Try harder to open an AP.
...
Problem seen on STM32L0 with probably long sleep periods.
2020-11-27 22:26:48 +01:00
cda83d3084
Fix memleaks.
...
Happened e.g. when Stlink could not enter debug or when cortexm_prepare timed out.
2020-11-27 22:26:48 +01:00
824a1d8abc
hosted/find_debuggers: Do not check hubs. Print class of devices unable to open.
2020-11-27 22:26:48 +01:00
e68dd25813
cl_utils: Clarify -d option is BMP/firmware only and deprecate -d.
2020-11-27 22:26:48 +01:00
f71e18948a
GPIO for SWD: Slow down edges on more platforms.
2020-11-27 22:26:48 +01:00
80154c5c7a
adiv5_swdp: Fix more memory leak.
2020-11-27 22:26:48 +01:00
d75f3124b9
ftdi_bmp.c: Reapply fix from #715 : Check for libftdi 1.5
2020-11-01 12:09:27 +01:00
99142d1c0e
Add documentation details for building PC-hosted BMP in msys2.
2020-11-01 11:33:54 +01:00
18673d9a56
adiv5: Rework DP/AP refcounting.
...
ASAN non longer reports leaks with the STM32H745.
2020-10-23 09:40:15 +02:00
80ddafc2f8
Jtag/High Level : Transfer dp->dp_jd_index with every HL command.
...
- Add REMOTE_HL_VERSION, now at 1. Fall back to hosted/low-level
when wrong version is found and give hint to user.
2020-10-23 09:40:15 +02:00
0995fe1288
cmsis-dap: Various fixes
...
- decrease report size to 64, otherwise MIMRXT10x0-EVK crashed when
reading larger memory block
- dp_read_reg acts direct, fixing CortexM core register read.
- length of data to write with read_block.
2020-10-23 09:40:15 +02:00
f15b1d7763
cl_utils: Clip opt_flash_start only when not set.
2020-10-23 09:40:15 +02:00
cdd07544d5
Cortexm: Allow pure debug on devices not yet handled for flashing
...
- Recognize STM32L552 and MIMXRT10XX
- Fix another PIDR
- Fix bad debug print string.
2020-10-23 09:40:15 +02:00
77c4f9d702
stlink: Rework README.md
...
- Document flashing BMP Firmware and reverting to ST firmware
- Consistant nameing
2020-10-19 14:13:29 +02:00
9cd3193a89
bmp_remote.c: Fix bug introduced with 8b929c12c9.
2020-10-17 12:49:37 +02:00
8b929c12c9
hosted/jtag: Transfer jtag_devs to firmware.
2020-10-16 20:03:03 +02:00
3d92b82678
jtag: Use index and not device structure for jtag_dev_write_ir and jtag_dev_shift_dr
2020-10-16 20:03:03 +02:00
6e2a074064
bmp_remote: Deny high level JTAG for now.
...
jtag_devs and jtag_dev_count needs to be known on th firmware side
and remote_dp->dev needs to be filled with jtag_dev_t.
2020-10-16 20:03:03 +02:00
7ccf0d3e03
jtag_dev_t: Make dev, idcode and desc less generic.
...
No codechange intended.
2020-10-16 20:03:03 +02:00
817c62d7fd
Merge pull request #507 from UweBonnes/cortexm_romtable
...
Cortexm romtable
2020-10-08 10:53:17 +02:00
44bfb62715
Adiv5: Print Designer/Partno when device is not recognized
...
t->idcode is now 16 bit.
2020-10-07 20:12:35 +02:00
a254bc6308
Fix icdi usb error https://github.com/blacksphere/blackmagic/issues/740 https://github.com/blacksphere/blackmagic/pull/748
2020-10-07 18:08:04 +02:00
ceaee2a11e
hosted: Hint about BMPs in bootloader mode.
2020-10-07 17:12:22 +02:00
9bba3165fb
swdptap: Turnaround immediate after a reading with parity.
...
Thanks to JojoS.
Probably mostly cosmetic, but is keeps the device from driving SWDIO
until the next commands.
2020-10-02 10:51:14 +02:00
4d18496a6f
hosted: Allow to disable high level commands for BMP.
...
Useful for tracking low level problems on native with hosted.
2020-10-01 15:49:21 +02:00
747336e927
f4discovery: Slow done JTAG pin slew rate to avoid ringing #742
2020-10-01 15:06:16 +02:00
61d919c1ac
libftdi: Remove no longer needed workaround for travis CI.
2020-09-20 14:10:37 +02:00
77231e8972
serial_no: Fix error with "mon trace" #732
...
launchpad-icdi: Allow to set a serial number with make
2020-09-20 13:23:52 +02:00
a4a934f461
Add comments for hardware revision of v2.1
2020-09-17 11:54:19 +02:00
75b5e72a00
Fix typo
2020-09-16 18:41:56 +02:00
de01a75ca9
Fix broken link to bluepill pinout.
2020-09-15 20:58:10 +02:00
6d18a61b2e
hosted: Make ASAN build optional.
...
Use ASAN=1 on the make command line to activate,
2020-09-11 15:23:13 +02:00
58281ec232
SWD Timing: Enhance SWD high time with low speed loss.
...
On F103 no high time < 80 ns and no low time < 100 ns was seen with a scope
2020-09-04 14:45:34 +02:00
af3480e523
hosted: Update Readme.md
2020-09-04 11:49:13 +02:00
6650831243
ftdi: Get turtelizer (JTAG only FT2232D dongle) going
...
FT2232D seems to dislike "Set TCK/SK Divisor" or
"Set Data Bits Low Byte" as first command on a non-first run
- Add printout when garbage is found
- Add "Disconnect TDI to TDO for Loopback" as first MPSSE command
(seemed to help!)
2020-09-04 11:49:13 +02:00
74b3baad1e
ftdi_bmp : Another size fix and small rearrangement.
2020-09-04 11:49:13 +02:00
aeb97466b9
libftdi: Automatically switch to JTAG if SWD is not possible.
2020-09-04 11:49:13 +02:00
ae8cb8ab46
ftdi_bmp: Reject writes with no data.
...
Pending transfers made the MPSSE behaviour strange and unpredictable.
2020-09-04 11:49:13 +02:00
c41ab1738e
ftdi/swdptap: Use parity builtin. Fix array width.
2020-09-04 11:49:13 +02:00
34d0f8a2a1
ftdi: Recognize bitbang SWDIO settings.
2020-09-04 11:49:13 +02:00
6ac0a25123
ftdi: Add UM232H as probe.
2020-09-04 11:49:13 +02:00
d73a6a3d29
platform/ftdi: Do not double initialize.
2020-09-04 11:49:13 +02:00
f0b0639189
ftdi: Output wire debug.
2020-09-04 11:49:13 +02:00
e95e5e3fba
ftdijtag: Really enable TMS/TCK/TDI driver.
2020-09-04 11:49:13 +02:00
f4eed249eb
hosted/ftdi: Allow to list supported cables.
2020-09-04 11:49:13 +02:00
7b497302c0
hosted/ftdi: Autodetect ftdi cables with distinguishing feature.
2020-09-04 11:49:13 +02:00
a83e76bef9
libftdi: Add USBMATE.
2020-09-04 11:49:13 +02:00
c78066255d
libftdi: Infrastructure to test for target voltage present.
2020-09-04 11:49:13 +02:00
aff624b6e0
libftfdi: Allow to specify external resistor SWD connection.
...
More explanations in src/platforms/hosted/Readme.md
2020-09-04 11:49:13 +02:00
eabf45357d
libftdi: Reinitialize pins when switching JTAG/SWD.
2020-09-04 11:49:13 +02:00
05534e9b49
libftdi/swdptap: Provide SWD using generic MPSSE if hardware allows.
2020-09-04 11:49:13 +02:00
40ba261982
libftdi: Use asynchronous transfers if header indicate newer libftdi1.
...
This is a hack to keep travis happy. Setting up travis to use a recent
libftdi1 is a major issue.
2020-09-04 11:49:13 +02:00
9b6e19785e
Implement SRST for libftdi.
...
Travis GCC needs -Wno-missing-field-initializers or will otherwise warn.
2020-09-04 11:49:13 +02:00
dea4be2539
Add ifdef to check for libftdi 1.5 to use ftdi_tcioflush instead of ftdi_usb_purge_buffers
2020-08-21 13:10:55 +02:00
7e1b0321e2
Cleanup Makefiles for hosted bmp on darwin
2020-08-21 11:28:17 +02:00
5908fc2da1
Add serial auto-connection to darwin target
2020-08-21 11:28:17 +02:00
e75eb19d78
cmsis_dap: Detect CMSIS-DAP before STLINK
...
Debugger may be realized with the ST USB Vendor ID.
2020-08-16 15:20:58 +02:00
998a9747f8
cmsis_dap: Make some errors more prominent.
2020-08-16 15:20:58 +02:00
c97c4a0960
hosted: Better decoding for ap_decode_access().
2020-08-16 15:20:58 +02:00
badff20099
cmsis_dap.c: Fix dap_dp_read_reg.
2020-08-16 15:20:58 +02:00
dd74ec8e6f
stlinkv2: Detect fail mem_read on jtag too.
2020-08-05 16:20:52 +02:00
805cfbdcb5
Build hosted for widows with hidapi static linked.
2020-08-03 18:59:50 +02:00
fca8593d92
serial_win: Find BMP comport by serial number.
2020-08-03 18:59:50 +02:00
3eb51ce94f
serial_win.c: Copy the enough of the device name.
2020-08-01 14:00:17 +02:00
11217f8a45
serial_win: GDB needs to handle DTR.
2020-08-01 14:00:17 +02:00
71e5b4d3cb
hosted/stlinkv2.c: Fix bug introduced with #703
2020-07-29 13:42:07 +02:00
72387164eb
hosted/stlinkv2.c: Handle AP_WAIT error when switching to SWD
2020-07-29 12:22:18 +02:00
a392480631
hosted/stlinkv2.c: Use V2 API to read coreid.
2020-07-29 12:22:18 +02:00
64cf30e4cd
Rework/update/add Readme.md in the platforms directories.
2020-07-29 10:32:49 +02:00
52bfe538e3
cdcacm.c: Set bMaxPacketSize0 to 32 ( #693 , #697 )
...
Smaller bMaxPacketSize0 resulted in delayed enumeration when BMP firmware
is started by the STLink bootloader.
2020-07-14 15:57:03 +02:00
a673efc26b
Remove extra definitions of jtag structures in the STLink hosted setup to support "gcc (GCC) 10.1.0" on Archlinux
2020-07-12 23:14:19 +02:00
fc6ca5bc06
Remote: Add procedure to test if high-level remote functions are available
...
Removes need for updated version string.
2020-07-08 14:15:35 +02:00
bfda64c656
stlink: Remove unused double defined variable "running_status"( #683 )
2020-07-02 19:44:31 +02:00
85d35b75ce
libftdi/jtagtap_tdi_tdo_seq: Remove dubious Null termination.
2020-07-02 14:56:10 +02:00
a4cdd6b310
hosted: Report missing USB access rights only if no debugger found.
2020-06-07 16:29:19 +02:00
e35025d214
CMSIS_DAP: Warn when hidapi-libusb is not found.
2020-06-06 15:28:53 +02:00
5097a23196
jlink: Fix wrong sized array.
2020-06-06 15:28:53 +02:00
4ede113ca7
hydrabus: Disable DFU file generation untit somebody fixes dfu-convert.py
...
This allows "make all_platforms" to succeed on python3 only systems.
2020-06-05 16:23:28 +02:00
aabd07738e
cl_utils: Use start of flash in memory map as default flash start.
2020-06-05 14:59:30 +02:00
425002a38f
hosted: Add -l argument to list only available debuggers and exit.
2020-06-05 14:59:30 +02:00
dc3fd2eb06
Classify debug messages
...
Firmware BMP with ENABLE_DEBUG=1 will print WARN and INFO as before.
PC-Hosted BMPwill alway print to stderr. Warn is printed unconditional,
INFO, GDB, TARGET, DONGLE and WIRE will print if their appropriate bit in
cl_debuglevel is set via the -v verbose command line argument.
INFO will go to stdout with -t or -l.
2020-06-05 14:59:30 +02:00
9ade8b24f7
hosted: Add Readme.md
2020-06-05 14:59:30 +02:00
4698a26bab
common/swdptap: Slight speed increase and better setup time for write.
2020-06-05 14:59:30 +02:00
64f3dff8a8
PC-Hosted: Better debug output.
2020-06-05 14:59:30 +02:00
b06c0ba8d5
bmp_remote: Use high level functions.
...
Based on #570 (OpenOCD HLA interface driver for Blackmagic), but now
usefull for bmp-remote.
2020-06-05 14:59:30 +02:00
921c23eb74
serial_unix: Return instead of exit in case of error.
2020-06-05 14:59:30 +02:00
ef558eebb8
CMSIS-DAP support.
...
Thanks to edbg, pyocd and openocd for code and ideas.
2020-06-05 14:59:30 +02:00
4ba6afed28
Add jlink pc-hosted platform.
2020-06-05 14:59:30 +02:00
da45281696
GetTargetVoltage: Print info about voltage only when info is relevant.
2020-06-05 14:59:30 +02:00
ef816e3183
hosted: add libftdi implementation, remove old implementation.
2020-06-05 14:59:30 +02:00
ab7991c3a6
hosted: Add bmp_remote, remove old pc-hosted platform.
2020-06-05 14:59:30 +02:00
13c3c934d2
Hosted: Add Stlink, remove old pc-stlinkv2 platform
2020-06-05 14:59:30 +02:00
09602a9e74
serial_unix: Simplify timeout setting.
2020-06-05 14:59:30 +02:00
8fea3f6baa
pc/serial_xx: Change arguments for the open call.
2020-06-05 14:59:30 +02:00
a09104c281
Build firmware executables as *.elf file
2020-06-05 14:59:30 +02:00
dd022fcb44
platforms/pc: Add common usb utilities.
2020-06-05 14:59:30 +02:00
52739def01
Copy relevant stlink files.
2020-06-05 14:59:30 +02:00
386a4bfce7
hosted: Device detection and selection.
2020-06-05 14:59:30 +02:00
3290def5f8
Add empty compilable project.
2020-06-05 14:59:30 +02:00
c3d509e6c0
Clean up PLATFORM_HAS_DEBUG
...
Use only for firmware platforms.
2020-06-05 14:59:30 +02:00
9a46c6fd25
Allow BOARD_IDENT as function
2020-06-05 14:59:30 +02:00
563df2d354
Detour ADIv5 high-level functions.
2020-06-05 14:59:30 +02:00
9969c984f3
detour jtag primitives.
2020-06-05 14:59:30 +02:00
e34a27f72c
Detour swd primitives.
2020-06-05 14:59:30 +02:00
1e10b96b03
Allow multiple scan routines.
2020-06-05 14:59:30 +02:00
eee16cf08a
platforms/tm4c/jtagtap.c: Remove unreferenced and incomplete file.
2020-06-05 14:59:30 +02:00
7956fbc361
cl-utils: Print memory map when test is specified.
2020-06-05 14:59:30 +02:00
b5182e09d0
cl_utils: When reading from flash to file, truncate the file.
2020-06-05 14:59:30 +02:00
8db979798c
cl_utils.c: Report read/write speed.
2020-06-05 14:59:30 +02:00
c5d0902d4c
cl_utils: Fix memory leak.
2020-06-05 14:59:30 +02:00
815e09bb1b
cl-utils: Add more arguments
2020-06-05 14:59:30 +02:00
05adcd9bf5
remote.c: Compile only relevant functions.
...
Do no compile firmware functions when compiling pc-hosted.
2020-06-05 14:59:30 +02:00
34a13723d8
Decrease the control USB pipe size on f103 blackmagic probes to 8 bytes
...
Rationale:
In USB device mode, the f103 chip provides 512 bytes
of memory for USB traffic. In the 'master' branch
of the blackmagic probe, the control endpoint pipe size
is set to 64 bytes, effectively consuming a quarter
(1 'in' endpoint, 1 'out' endpoint == 2 endpoints,
2 /* endpoints */ x 64 /* bytes per endpoint */ == 128 bytes
out of 512 /* bytes of precious usb packet memory */).
The USB standard, for full speed devices, does allow
a control endpoint size of 8 bytes.
I am not too aware of all the details of the USB standard,
but the USB standard seems to allow fragmented transactions
on the control USB pipe (endpoint 0), which libopencm3
apparently supports:
libopencm3/lib/usb/usb_control.c:usb_control_send_chunk()
I am using this change (from 64, to 8 bytes)
on a windows 10 machine, on an stlink hardware
('PROBE_HOST=stlink'). It works on my machine.
This change can potentially provide other USB endpoints
in the blackmagic firmware with more memory
2020-06-05 13:58:08 +02:00
34c0d5a1c9
When timeout is 0, `timeout_is_expired()` should return immediately.
2020-06-05 12:33:24 +02:00
541861e978
traceswo decoding
2020-05-16 15:04:35 +02:00
805464db23
Fix redefinition of io function
...
Now it should work fine with any gcc version. Old one produces error
like in #657
Signed-off-by: Alexey 'Alexxy' Shvetsov <alexxyum@gmail.com>
2020-05-10 10:58:03 +02:00
d63e870e82
cdcacm: Fix UART interface OUT endpoint MPS in descriptor.
...
3e3e450Fixes #538
2020-05-01 12:39:40 +02:00
08bb4d5775
pc-hosted: Make JTAG work.
2020-04-27 20:30:51 +02:00
58a8571d5b
stlink: Print Target voltage
...
This adds about 600 bytes.
2020-04-03 16:19:20 +02:00
8a9980cd06
pc/serial_unix: bump device path buffer size to 4096 bytes
...
Since dp->d_name can be up to 255 bytes long and the 'name' buffer variable is
is a superset of it, bump the size of the latter to 4096 bytes (correspoding
to PATH_MAX on Linux systems).
2020-04-03 11:05:11 +02:00
b4ab9f328e
pc-hosted: Put serial handling in own files for unix and implement for windows.
...
- If host provided /dev/serial/by-id, device must not be given and
multiple devices may be selected with -s <(partial) serial number>
- On windows, device must by specifies with -d
2020-03-31 17:02:56 +02:00
18ae2bb50d
cl_utils.c: Include <windows.h> for windows builds that work on files.
2020-03-31 17:02:56 +02:00
1a0cee4e9d
pc-hosted: Clean up Makefile.inc.
2020-03-31 17:02:56 +02:00
bd73adf9c7
bmp/pc platforms: Deduplicate code.
2020-03-31 17:02:56 +02:00
9ca401497c
stm32/timing_stm32.c: Remove fixed constants and direct SCB access
2020-03-31 16:54:04 +02:00
eca3a8dd8f
pc-stlinkv2: Make stlink_usb_get_rw_status static and allow to suppress errors
...
This helps to not overflow the console.
2020-03-26 17:56:12 +01:00
91d7656d86
stlink/bootloader: Really allow to detach.
...
- To reenumerate, rcc_periph_reset_pulse(RST_USB) seems enough.
- Document bootloader entry and exit behaviour of ST-LINK V2
- Document bootloader entry on ST-LINK V2-1
2020-03-26 17:15:32 +01:00
890b494290
pc-stlinkv2: Update README.md
2020-03-26 12:21:22 +01:00
2e185ba578
BMP/PC: Allow to compile with mingw64 ( #615 )
...
__USE_MINGW_ANSI_STDIO 1 must be set befor any windows specific included.
2020-03-24 17:59:13 +01:00
2b76ec0ea3
dfucore: Reject erase outside the allowed range
...
An illegal erase request may get emitted as the DFU program may erase
first. Checking before flashing is not enough.
2020-03-22 16:38:54 +01:00
a7efe7cc14
cl-utils: Display targets found.
...
+ other small changes in DEBUG output.
2020-03-10 17:34:30 +01:00
65cb886bb6
Export connect_under_reset.
2020-03-10 11:44:53 +01:00
c7e7bd61b6
stlink: Do not wait for the reaction on the reset line.
...
pc-hosted will abort, if the reset line is held externally to some value.
As assert is either driven or driven open drain, we can assume assert
immediate. For deassert, logic levels differences between the debugger and
the debuggee may apply and other ways to check the result are needed, like
CORTEXM_DHCSR_S_RESET_ST.
2020-03-08 16:27:03 +01:00
e48d9ebc92
cl_utils: Allow to connect under reset.
2020-03-06 23:15:56 +01:00
05dc2e239e
pc-hosted: Disable TPWR when blackmagic command line interaction terminates.
2020-03-06 17:16:33 +01:00
c94a03af48
STM32F1 High density devices DFU support( #587 )
2020-03-05 19:58:55 +01:00
13b9fe1efc
cl_utils: There is no need for a (dummy) target controller.
...
Fix for #593 .
2020-03-04 16:57:05 +01:00
03d84d0d5c
command line tools: Allow to set power.
2020-02-20 12:12:26 +01:00
7a595ead25
fixup F103x8 flash size before build dfu iface string
...
we handle F103x8 as F103xB with 128k flash
2020-01-22 16:01:39 +01:00
Uwe Bonnes
Stoyan Shopov
David A. Aguirre Morales
jxltom
Raghu
Matthew Skolaut
Aled Cuda
Valmantas Paliksa
Mark Rages
Koen De Vleeschauwer
Alexey 'Alexxy' Shvetsov
Vegard Storheil Eriksen
Francesco Valla
Extreme kefir
zvova7890