ae1cb56ce0
kinetis: Switched to the unified mass erase command for the recovery target and added progress dots to stop GDB timing out
2022-07-13 19:34:57 -07:00
9d46d0c5c6
target: Refactored out the progress printer to reduce Flash usage
2022-07-13 19:34:57 -07:00
b8ca831cfb
efm32: Switched to the unified mass erase command for the recovery target and added progress dots to stop GDB timing out
2022-07-13 19:34:57 -07:00
c1758088cd
efm32: Switched to the unified mass erase command and added progress dots to stop GDB timing out
2022-07-13 19:34:57 -07:00
17c04d585e
stm32f1: Switched to the unified mass erase command and added progress dots to stop GDB timing out
2022-07-13 19:34:57 -07:00
c2d72b4825
kinetis: Switched to the unified mass erase command and added progress dots to stop GDB timing out
2022-07-13 19:34:57 -07:00
c35f65c6c0
target: Implemented a global target mass erase command
2022-07-13 19:34:57 -07:00
30e2106e40
target: Make the buffers used to program a target's Flash better bounded in lifetime and memory usage
2022-07-13 19:08:31 -07:00
3e9913e88b
Implement semihosting debug output redirection to usb-uart port.
2022-07-13 18:49:20 -07:00
c7b54d2eaa
BMP V2.3: Fix outdated ADC reads.
...
We are using GD32F103 on the BMP V2.3 hardware. The GD32F103 has an
errata for the ADC where the end of conversion (EOC) bit is not reset
when reading the ADC result. This resulted in us not waiting for the new
value to be acquired and reading an old value instead. The solution for
that is resetting the EOC bit manually after reading the ADC result, so
that on the next acquisision we wait for the conversion to finish.
This patch also increases the sampling time as the GD32 have lower ADC
impedance than the STM32 and this should help us read a more accuarate
target voltage.
2022-07-14 01:54:43 +01:00
4bc68409f8
kinetis: Clean up how kl_gen_flash_done builds the command buffers to send to ensure the security byte is OK
2022-07-11 17:12:23 -07:00
f0566979b0
kinetis: Fixed the flash write command generation for K64 devices
2022-07-11 17:12:23 -07:00
6f273cadd8
kinetis: Try to be safer about our FCCOB writes so the Flash controller's less likely to get mad
2022-07-11 17:12:23 -07:00
0c18fcefe3
kinetis: macro organization and clearer function naming
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-07-09 15:55:37 -07:00
ba1f102469
misc: Disbabled a clang-format warning that's generating far too much noise
2022-07-09 15:45:06 -07:00
18a49ac853
kinetis: Run clang-format on the code
2022-07-09 15:45:06 -07:00
72e4f4d2b2
kinetis: Refactored out some common code from kinetis_probe for the S32K14 lineup
2022-07-09 15:45:06 -07:00
fee6f28915
kinetis: General formatting and readability cleanup
2022-07-09 15:45:06 -07:00
9b8d2fb822
stlink: Added documentation about the new SWIM_AS_UART build option
2022-07-03 18:05:02 -07:00
a95e2e80bc
stlink: Add option to turn SWIM/RST into UART RX/TX
...
Building for `stlink` with `SWIM_AS_UART=1` now enables the use of the
SWIM and RST ports as RX and TX on cheap ST-Link V2 clones.
This is done by using USART1 on the alternative port instead of USART2.
2022-07-03 18:05:02 -07:00
f2c59b052c
misc: Fixed the README title/headings situation and cleaned up a bit further
2022-07-03 17:56:32 -07:00
7bc2fa53f1
misc: Reworded the README section of BMDA to match the name change
2022-07-03 17:56:32 -07:00
c26115b3f7
blackpillv2: clarify how to exit bootloader mode
...
There is no need to press any other "key" other than NRST button. So
update documentation according to that.
2022-07-01 06:56:57 -04:00
86a12ddaaa
blackpillv2: clarify how to enter to bootloader mode
...
According to [1] all PCB revisions have BOOT0 and NRST labels near
buttons. Reference those in README for ease of use.
PB2/BOOT1 has a 10k pull-down on PCB (in all revisions, according to
[1]), so there is no need to do anything on the board (like "jumpering
to GND") unless the board was modified by user. Hence don't reference
PB2/BOOT1 in the README, as it was just confusing to the user.
[1] https://github.com/WeActTC/MiniSTM32F4x1/tree/master/HDK
2022-07-01 06:56:57 -04:00
141fd17f63
blackpillv2: update references in UsingRTT
...
"blackpillv2" is now a separate platform from "f4discovery". Update
UsingRTT according to that.
2022-07-01 06:01:06 -04:00
61c2724c9d
blackpillv2: fix PROBE_HOST in Readme.md
...
After renaming directory with s/blackpill/blackpillv2/, Readme.md still
contained the old 'blackpill' name in PROBE_HOST. Fix that by replacing
it with 'blackpillv2'.
Fixes: 3ccb0af21c
2022-07-01 06:01:06 -04:00
780ee7a2a8
Fix build error and logic ...
2022-06-28 06:31:16 -04:00
cf204448bf
misc: Fixed the push and pull_request branch requirements for our CI to run
2022-06-27 23:35:33 -07:00
d78f7696cc
stm32/serialno: Run clang-format on the serial number code
2022-06-27 23:11:42 -07:00
fef40b701f
stm32/serialno: Fixed a typo in the 24 character serial number loop
...
before: 0670FF530000000000000000
after: 0670FF535567494867085055
2022-06-27 23:11:42 -07:00
d140b4b667
stlink: Fix the LED pinout on the Nucleo boards
2022-06-27 23:09:56 -07:00
1a963b81f6
target/stm32f1: GD32E230 option write special case handling
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-06-27 18:13:52 -04:00
e7a7d82b33
target/stm32f1: remove unused code snippet and superfluous preprocessor check, less pedantic wording on warning
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-06-27 18:13:52 -04:00
a5ebff14bb
target/stm32f1: remove redundant grouping ad for loop cleanup
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-06-27 18:13:52 -04:00
90ed4fe31a
target/stm32f1: clang-format and code styling for better readability
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-06-27 18:13:52 -04:00
5666fa2a2f
target/sam3x: add aditional check for valid EEFC addr
...
Signed-off-by: Rafael Silva <rafaelsilva@ajtec.pt>
2022-06-27 07:48:54 -04:00
1bca0323d9
target/sam3x: saner uninitialized variable prevention
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-06-27 07:48:54 -04:00
2ef4269b0e
misc: Added recomendations for VSCode extensions to be used with the project
...
This has been done so that clang-tidy and clang-format can be better enforced
2022-06-26 22:28:31 -07:00
3a02fdea9d
misc: Added a clang-tidy Makefile target so enforcing the formatting is easier
2022-06-26 18:55:04 -07:00
0e184c7b98
misc: Cleaned up the clang-format configuration ready for it to be applied
2022-06-26 18:55:04 -07:00
30a7e9f0d4
misc: Added a clang-tidy Makefile target so we can run `make clang-tidy` now
2022-06-26 18:55:04 -07:00
215b935b83
scripts: Created a clang-tidy runner to allow quick and easy running of clang-tidy across the code base
2022-06-26 18:55:04 -07:00
4339a131e8
misc: Written a basic clang-tidy configuration
2022-06-26 18:55:04 -07:00
730a795f09
Add idcode for GD32F303CG detection
2022-06-26 21:00:26 -04:00
09f64b0627
misc: Added a HACKING.md to provide an explanation of nomenclature and how we handle reset terminology
2022-06-26 16:51:58 -07:00
c33d02bc19
hosted/stlink: Improved the information output and its consistency
2022-06-26 16:51:58 -07:00
aa9c80b37d
misc: Formatting consistency
2022-06-26 16:51:58 -07:00
2765811bbb
hosted/stlink: Naming consistency for 'stlink' global object
2022-06-26 16:51:58 -07:00
66b2d0659a
hosted: type naming consistency
2022-06-26 16:51:58 -07:00
baf84c9eb4
launchpad-icdi: Cleaned up and fixed some C89-isms
2022-06-26 16:51:58 -07:00
dragonmux
Anti Sullin
Piotr Esden-Tempski
Rafael Silva
Silke Hofstra
Marcin Niestroj
Jonathan Giles
Manoel Brunnen