sys64738
/
blackmagic
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
1,712 Commits 3 Branches 0 Tags 5.2 MiB
Commit Graph

1712 Commits

Author SHA1 Message Date
Uwe Bonnes ac7c1057cc efm32/samd/samx5x: Remove static allocates strings. Allocate in priv_storage. 
Static allocated variables in the different targets eat up common RAM and
will collide in chains with multiple similar targets.
 2021-04-25 16:03:23 +02:00
Uwe Bonnes cddf02f174 samx5: Verbose error reports on protected devices. 2021-04-25 16:03:23 +02:00
Uwe Bonnes 8c8aa980cf adiv5: Detect unprotected SAMD5x only once 2021-04-25 16:02:20 +02:00
Uwe Bonnes f98b7274b4 hosted/stlinkv3: Detect STlinkV3 in bootloader mode. 2021-04-25 16:02:20 +02:00
Uwe Bonnes a83700d1cf stm32/usbuart: DMA stream handling is not STM32F4 specific 2021-04-25 16:02:20 +02:00
Uwe Bonnes 1330288271 firmware: Unify serial number handling 
Use one file in dfu and server
For STM32, provide 3 ways to handle
- BMP way (8 bytes)
- DFU way (12 Bytes)
- Full unique id (24 Bytes), as with STLINK(V3) Bootloader
 2021-04-25 16:02:20 +02:00
UweBonnes 8da2dee0c4
Merge pull request #857 from UweBonnes/rp 
Support the Raspberry Pico RP2040

    Implement multi-drop
    Recognize , erase, flash and usb_reset
    Attach to the rescue DP will reset but attach itself fails.
 2021-04-25 15:48:35 +02:00
Uwe Bonnes 1b26ff560d rp.c: Add reset_usb_boot as monitor command 2021-04-24 14:48:58 +02:00
Uwe Bonnes 52bffa70cf rp: Handle flash. 
- Beware, after reset, only a valid flash payload get mapped to XIP!
  Only 0 is read from flash when flash image is not valid
 2021-04-21 21:55:03 +02:00
Uwe Bonnes 2b0e255c40 cortexm: timeout and debug for run_stub() 2021-04-21 21:50:38 +02:00
Uwe Bonnes 61efe26348 swdp_scan: Break infinite loop after Dormant->SWD transition. 2021-04-21 21:50:38 +02:00
Uwe Bonnes fa5e69e3be RP 2040: Special handling for rescue DP 
As the rescue DP provided no AP, trigger the reset with attach().
However attach will indicate failure also reset/halt has succeeded.
 2021-04-21 21:50:38 +02:00
Uwe Bonnes ea92c8b8c8 cmsis-dap: Allow to use adiv5_swdp_scan. 2021-04-21 21:50:38 +02:00
Uwe Bonnes 23f942ac8c Raspberry RP2040: Recognize. No flash handling yet. 2021-04-21 21:50:35 +02:00
Uwe Bonnes 04d1c9805b swd: Remove swd_proc and swdptap.h. 2021-04-21 21:50:04 +02:00
Uwe Bonnes b6fbf86743 Extend ADIv5_DP_t for low level routines needed for multi-drop. 
Will replace swd_proc
 2021-04-21 21:50:04 +02:00
Uwe Bonnes 61e237ec87 cmsis_dap: Always write full reportsize + 1 buffers 
Expect short reads and other errors else
 2021-04-21 21:50:04 +02:00
Uwe Bonnes d6ade4d94e cmsis-dap: Use SWD_SEQUENCE if available. 2021-04-21 21:50:04 +02:00
Uwe Bonnes 5abb288c7a hosted: Provide the DP functions in swd_proc. 2021-04-21 21:50:04 +02:00
Uwe Bonnes fa561c8d66 adiv5_swdp: Starting point to handle multi-drop 
- RP2040 show both DPs
- Multidrop test with STM32L552 and STM32H745 allows selection
  with "-m 0x4500041" (H7), "-m 1" (L552) or "-m 0x01002927" (RP2040)
 2021-04-21 21:50:04 +02:00
Uwe Bonnes be3bfc48a8 cortexm: M33 has up to 8 hardware breakpoints 2021-04-21 21:22:59 +02:00
Uwe Bonnes 65f08cd46d README.md(top): Mention hosted build for BMP only. 2021-04-21 21:22:59 +02:00
Uwe Bonnes b1ac4187b9 Fix some formatting strings for 32-bit compile 2021-04-21 21:22:59 +02:00
Uwe Bonnes 637d76b585 cl_utils.c: Try jtag scan if swd scan did not give results. 2021-04-21 21:22:59 +02:00
Uwe Bonnes 5288eef617 cl_utils: With no size given, read the size of the lowest block. 2021-04-20 18:48:27 +02:00
Fabio Baltieri beaccf2714 target: stm32l4: add support for STM32WLxx 
This adds support for the STM32WL series in stm32l4.c. These parts have
the same flash registers layout as the L4 series, but a different base.
Since there are already two sets of registers in this target file, this
adds support for register maps that can be customized for each device
ID.
 2021-04-20 18:42:36 +02:00
Uwe Bonnes 21b80949ff Compile with -Os as default. Change like "make OPT_FLAGS=..." 
SWD/JTAG Bitbang is compiled with -O3 for good bitbang speed.
 2021-04-20 18:20:41 +02:00
Fabio Baltieri f55ad67b1b adiv5: catch timeout on adiv5_ap_read_id and abort 
This adds a TRY_CATCH around the adiv5_ap_read_id() in
adiv5_component_probe() and resets the DP when that happens.
It seems like the STM32WLE5 comes with the AP of the inactive core
enabled in a way that does not make it detectable, and the current code
times out and leaves the whole device hanging.

Catching the timeout and calling adiv5_dp_abort() seems to restore the
device to a useable state.

Tested on Seed LoRa-E5 (STM32E5JC).
 2021-04-19 16:57:13 +02:00
Vestrel 806787529f Use DMA for USBUSART TX/RX 2021-04-17 17:57:08 +02:00
Uwe Bonnes cf5b4afb38 bmp_serial/linux: Honor opt_list_only (-l). 2021-04-17 16:19:57 +02:00
fabalthazar d6b24c00c8 Fixed STM32G43x/G44x option bytes support 
Previously took L4 values so FLASH_SEC1R was not applied
 2021-04-17 14:44:30 +02:00
fabalthazar 99f9557cc0 Support for STM32G49x/G4Ax (category 4) 2021-04-17 14:44:30 +02:00
fabalthazar c85c946ce3 PRIx32 fix 2021-04-17 14:44:30 +02:00
Stoyan Shopov 9ec7d05d8d Put null terminating characters when scanning for BMP probes on linux 
This patch puts null terminating characters for the 'type',
'version', and 'serial' strings extracted from blackmagic probe
id strings on linux systems.
 2021-04-17 14:41:28 +02:00
Uwe Bonnes 2d293ec755 travis: Use bionic instead of trusty. 
No more need to compile libftdi1.
 2021-04-17 13:35:21 +02:00
Uwe Bonnes 299da8627c libftdi: Remove unneeded explicit path. 2021-04-17 13:35:21 +02:00
Uwe Bonnes a6a8606edb STM32L55: Detect, memory map, read and flash write. Options handling missing. 
Only non-secure states considered!
 2021-04-04 17:26:31 +02:00
UweBonnes db17f2caa8
Merge pull request #847 from fabalthazar/bugfix-845-hosted_verify 
Bugfix 845 - hosted verify right after programming
 2021-04-02 16:23:50 +02:00
fabalthazar 739941dc5f Verify right after programming 2021-03-31 13:06:52 +02:00
fabalthazar 2982888b66 BMP_MODE_FLASH_WRITE_VERIFY combined operation 2021-03-31 12:07:53 +02:00
fabalthazar f85c54be97 Prepared -w option 2021-03-31 12:07:53 +02:00
fabalthazar 6d6cfd6c98 Comprehensive STM32G03/4/5/6/7/8/B/C driver 2021-03-29 21:42:40 +02:00
UweBonnes fb8492a7e5
Merge pull request #846 from UweBonnes/cortexm_halt 
Cortexm halt
 2021-03-26 20:38:31 +01:00
Uwe Bonnes 58f153e12b cortexm: Always halt and release reset before romtable scan 
Only release from halt once after romtable scan
Should fix #836.
 2021-03-26 17:43:11 +01:00
Uwe Bonnes a025c9a7bd Revert "stm32f1: On ST parts there is no need to read IDCODE again." 
Romtable partno is not unique for devices, e.g. in STM32F0
This reverts commit f89b07d892.
 2021-03-26 17:35:00 +01:00
Uwe Bonnes f89b07d892 stm32f1: On ST parts there is no need to read IDCODE again. 
IDCODE is already known from the Romtable
Probably this has the same effect as #836
 2021-03-12 20:45:34 +01:00
Uwe Bonnes e6a9a1a366 cmsis-dap: Get the firmware version. 2021-03-06 13:30:09 +01:00
Uwe Bonnes 7859a2aabd adiv5_swd: Factor out creation of packet request. 2021-03-06 13:30:09 +01:00
Uwe Bonnes cfb784d428 adiv5: Fix comments and debug output 2021-03-05 16:49:19 +01:00
Uwe Bonnes 3aa6f16964 serial_unix: Split timeout in seconds and microseconds 
Macos exposed errors when tv_usec was > 1000000.
 2021-03-05 16:49:19 +01:00