d3c330ea1a
Fix issues with Travis CI build
...
It appears the Travis version of gcc-arm-none-eabi doesn't allow the %x
printf format specifier for size_t arguments, in contrast with the
version I'm running on Ubuntu 18.04 (15:6.3.1+svn253039-1build1).
2019-11-17 12:45:49 +01:00
26216beaab
Microchip SAM D51 / E5x support
...
Adds a target driver for Microchip SAM D51 / E5x family.
Tested on SAMD51G19A and SAMD51J19A. According to the datasheet, the
D51 / E5x family share the same core feature set, differing only in the
addition of CAN (E51) or ethernet controllers (E53/54). All members of
the family should be equivalent from a debug and programming perspective.
2019-11-17 12:45:49 +01:00
5a05cedd7d
pc-hosted/jtagtap.c: Handle DO as bytes (PR #552 )
...
Fixes #540/#542
2019-11-10 17:36:58 +01:00
28f0ced97e
Support NXP LPC1343
2019-11-09 18:47:07 +01:00
67f9d26644
samd: Add support for L21 & L22 (PR #345 )
2019-11-09 13:59:37 +01:00
04d9749f25
Makefile: Publish DFU binaries with the daily build. ( #549 )
...
Fixes #548 .
2019-10-28 16:37:41 +01:00
76f9a6ad42
stm32: Portability changes.
2019-10-20 22:20:06 +02:00
b9249fe104
adiv5: Activate DP reset sequence, guarded with timeouts.
...
While not working on most STM32, it succeeds on STM32G474.
Thanks to Dave Marples <dave@marples.net>
2019-10-20 22:15:28 +02:00
c6f43cf23f
Stlinkv2: Always call stlink_leave_state() first.
...
V2 devices after power on are in DFU mode. It is needed to leave DFU before
doing anything else.
2019-10-19 20:57:26 +02:00
58febdff79
Fixed tokenization of gdb monitor commands.
2019-10-19 13:25:26 +02:00
2eef202ee1
Use pkg-config to get CFLAGS & LDFLAGS for libftdi1
...
Pull request #535
2019-10-14 19:22:53 +02:00
0aedff6623
Set the accepted to socket to be blocking as that is what the code expects.
...
This is necessary on OSX (and probably BSDs) where they default to non blocking which causes recv() to return -1 with errno set to EAGAIN.
2019-10-14 12:45:10 +02:00
4a8cba0e9c
Add support for LPC1114/333 (LPC1100XL series)
...
This is not given in the user manual but the register immediately
following DEVICE_ID does apparently contain the correct part ID.
2019-10-13 13:01:19 +02:00
5c805c7d35
Fix buffer overflow in adiv5_component_probe()
2019-10-12 11:44:08 +02:00
90df8172ca
Addition of pc-hosted variant and extensions to other targets to support it.
2019-10-08 19:16:12 +02:00
8a1d8bfba3
Stlink: Variant for Stlink V2 that works with the original ST bootloader.
...
Use https://github.com/jeanthom/stlink-tool.git for encrypted upload and
switch to BMP.
2019-10-08 18:18:19 +02:00
0ae7cea1ae
Add LPC84 from UM11029, Rev. 1.4, tested on LPC845 Breakout board.
2019-10-08 18:17:43 +02:00
286b987822
Merge pull request #527 from UweBonnes/fixes
...
Fixes
2019-09-29 16:59:54 +02:00
12a2659671
pc-stlinkv2: StlinkV3 seems only to work with STM devices,
2019-09-29 16:48:42 +02:00
0599d2161c
pc-stlinkv2: Recognize another error and try to handle failing memread.
2019-09-29 16:48:31 +02:00
1cf0b8ac13
Make all arguments for all commands (struct *t, int argc, const char **argv).
...
-Wall on gcc8 otherwise warns without -Wno-cast-function-type but older
GCCs/CLang choke on that argument:
error: unknown warning option '-Wno-cast-function-type'; did you mean
'-Wno-bad-function-cast'? [-Werror,-Wunknown-warning-option]
This adds 24 byte to the binary, as some functions are now called with
additional dummy arguments:
"Pushing and popping garbage to keep the system happy"
2019-09-29 12:44:55 +02:00
f010a567bd
adiv5: Reject APs duplicating last AP.
...
Seen with TM4C129 on black MSP432R401 Launchpad. Scanning of APs is aborted,
so valid APs after duplicated APs are ignored.
2019-09-29 12:44:37 +02:00
fc3abf26ef
stm32_mem: Fix native crashing in dfu-detach when repeatedly flashed.
2019-09-28 21:28:35 +02:00
afbde05cd3
Linker: Recent libopencm3 linker already sets the stack.
...
Thanks to Sid Price for noticing #520 .
2019-09-23 22:48:21 +02:00
fae2966b72
Target: Default to nop-function() for all exported target functions.
...
Fixes #522 .
2019-09-23 17:42:29 +02:00
3a6947a68f
stlink: Check for baite variant. ( #519 )
...
If PC13/14 float and PB11 is pulled high, recognize as baite.
Handle as rev.1 board. Deciphered from:
http://www.avrki.ru/picture/articles/samodelniy_st_link_v2/shemf_st_link_v2.jpg
2019-09-05 20:37:16 +02:00
609e6b135d
nrf51: Add nop_function as halt_poll. ( #517 )
...
Otherwise "tar ext ...; mon s; att 2; quit", start new gdb "tar ext ..."
crashes, at least on pc-hosted platforms.
2019-09-04 13:50:13 +02:00
6663da7ff5
cortexm.c: Fix DWT Mask ( #516 )
...
See #513
2019-09-04 13:28:55 +02:00
00937348b3
Fixes to compile "make ENABLE_DEBUG=1 all_platforms" ( #515 )
2019-09-04 13:09:43 +02:00
7dcb3295c6
Native: Link against nanolib. ( #514 )
...
This frees about 13 kB or 30 kB with ENABLE_DEBUG=1
2019-09-04 12:51:30 +02:00
e6504e149b
cortexm: Implement single register read/write
2019-09-01 20:38:38 +02:00
7bcf7f4924
cortexa: Implement single register read/write
2019-09-01 20:38:38 +02:00
20cad17ce3
target: Implement generic multi-register read/write
2019-09-01 20:38:38 +02:00
19a8078f99
gdb: Implement 'p' and 'P' register access
2019-09-01 20:38:38 +02:00
9f4cf4124e
target: Add new methods for read/write individual regs.
2019-09-01 20:38:38 +02:00
71b8a4e081
Merge pull request #511 from UweBonnes/pc-stlinkv2
...
Pc stlinkv2
2019-09-01 13:07:35 +02:00
1d868bfffb
pc-stlinkv2: Detect stlink detach.
...
As libusb has no real async callback, we need to call libusb_handle_events()
in different places. While waiting for the gdb connection, we set the
socket to non-blocking and check additional for usb events in that loop. That
way, detach is also detected while waiting for connection. With debugger
attached, SET_IDLE_STATE ist missused for checking for usb events.
2019-09-01 12:19:14 +02:00
6f1cae9203
pc-stlinkv2: Wait for device attach.
2019-09-01 12:19:07 +02:00
86d0be9708
pc-hosted: Display morse message on controlling terminal.
2019-09-01 12:11:51 +02:00
80a9fd51ca
Clarify STM32F103x8 Flashsize handling.
...
Should finally fix #471 .
2019-09-01 12:11:51 +02:00
d39dc34382
pc-stlinkv2: Fix reg_read|write
...
- Fix wrong placed brace in cortexm_regs_write()
- Start writing with r0
- With register read, save only registers listed
2019-09-01 12:11:37 +02:00
d1ee827b4d
pc-stlinkv2: STLINK_SWD_DP_ERROR seem unrecoverable. Throw exception.
2019-08-31 11:20:17 +02:00
0d61106f90
pc-stlinkv2: Remove redundant read of CoreID.
2019-08-31 11:20:17 +02:00
aef055bb6f
adiv5: If setup AP0 fails, fail immediate.
2019-08-31 11:20:17 +02:00
a01109543e
pc-stlinkv2: Return failure if STLINK_DEBUG_APIV2_INIT_AP fails.
2019-08-31 11:20:17 +02:00
d994565f2e
pc-stlinkv2: Fix crash with serial given not matching connected devices.
2019-08-31 11:19:13 +02:00
052b5f830a
Made script executable with python3.
...
Added braces for compatibility with python3, should still be valid python2 which interpretes these braces as a tuple with a single element and simplifies it to that element.
Replaced whitespaces with tabs as required by python3, since indentation must be uniform (either whitespaces or tabs).
Removed trailing whitespaces.
Tested by flashing various STM32 boards with blackmagic firmware using python3.7.
2019-08-30 15:09:35 +02:00
5704c2fb5a
Merge pull request #508 from UweBonnes/swlink
...
swlink: Remove redundant conditional usbart_init().
2019-08-28 12:37:12 +02:00
2b7d4c5ade
swlink: Remove redundant conditional usbart_init().
...
Noticed in #506 .
2019-08-28 11:39:03 +02:00
35cb4e51e4
Windows Build Fixes GNU make 4.2.1 ( #502 )
...
After update of GNU make the tests for Windows OS are no longer needed. Note that GNU make 4.2.1 is used to build BMP under Windows OS.
Make native working
Again, the newer version of GCC make does not need the OS tests.
2019-08-28 10:45:41 +02:00
Ken Healy
Uwe Bonnes
Kirill Zhumarin
dpslwk
Roland Ruckerbauer
Daniel O'Connor
Thomas Bénéteau
Dave Marples
Gareth McMullin
Theodor M
Sid Price
