377e30ea03
coff: skip over bad symbol table entries.
2012-08-01 12:20:17 +12:00
0e5c38231b
rf2500: separate reset and run on exit.
...
This was causing a problem with the MSP430FR5739. Exiting and restarting
mspdebug would cause the reset vector (0xfffe) to be overwritten with
0xff 0xff. This didn't happen if you repowered the board between the
exit and restart.
2012-08-01 11:32:19 +12:00
e02567a712
Merge F2012 and G2231
2012-07-23 09:33:44 +12:00
ad6c39a0aa
simio_timer: implement TAIV register.
2012-07-20 09:20:37 +12:00
65d15ef680
Added "verify" command.
2012-07-18 14:03:55 +12:00
5584136b69
elf32: stop section extraction after the first error.
2012-07-18 14:00:16 +12:00
1e36394136
Implemented basic GoodFET support.
2012-07-18 12:26:55 +12:00
eae3026f5a
flash_bsl: fix error with large block sizes.
2012-07-16 10:05:46 +12:00
3cc5f47304
Support for demangling of C++ symbol names.
2012-07-16 10:02:06 +12:00
69f3a15187
fet_db: updated MSP430G2452.
...
New data contributed by Marc de Hoop <marc@springuin.nl>.
2012-07-06 08:56:34 +12:00
08cd326e66
Fix support for MSP430F2618.
...
Breakpoint count is stored as a byte, not a 16-bit word.
2012-07-06 08:50:44 +12:00
fc336e78d0
Correct source bits shift offset for non-register extension word
2012-06-28 09:49:42 +12:00
19dfb6b64c
Correct pushm.a count/register adjustment
...
The adjustment was applied to the register instead of the count, causing
0x144b to decode as "PUSHM.A #4 , R12".
2012-06-28 09:49:42 +12:00
7c04f72397
Accept default length for dis above 64 kiB boundary
...
Same fix as applied for md in 27f56783
2012-06-28 09:49:41 +12:00
546d716380
fet_db: merge 2553, 2403.
...
These chips can't be distinguished by their ID data.
2012-06-27 14:46:41 +12:00
e6cb2dc51d
tilib: fix DEVICE_ERASE_MAIN.
...
The address given to the library must be one inside main memory.
2012-06-19 10:08:48 +12:00
c243ed04dc
Add support for MSP430F6435.
...
Data contributed by Marc de Hoop <marc@springuin.nl>
2012-06-15 10:13:20 +12:00
dd2c6d997c
Avoid truncating breakpoint address
...
Use of uint16_t caused the stored breakpoint address to be wrong. However,
breakpoints above 64 kiB don't seem to work even with this, so there may
also be a FET issue.
2012-06-13 09:43:04 +12:00
d0b0b04cef
Add support for MSP430G2403.
2012-06-09 11:50:23 +12:00
25f6df0d0f
fix disassembly of 20-bit calla operands
2012-06-05 12:01:53 +12:00
8fe14ca1da
Correct counts in disassembled rxxm/pushm/popm
2012-06-05 12:01:50 +12:00
eb7da81c9c
Added support for MSP430F2252.
2012-05-15 08:38:25 +12:00
31e8dabd09
Fix delay_s for Windows.
2012-05-10 11:41:00 +12:00
f44d9d5281
elf32: more portable implementation.
...
The old implementation only worked on little-endian machines, and
relied on a particular struct layout.
2012-05-10 10:00:58 +12:00
6fd161faa7
Add delay_s() for portable sleep() substitute.
2012-05-10 10:00:12 +12:00
3517710455
Fix GDB breakpoint support.
2012-04-30 08:52:12 +12:00
2ce7a82657
tilib: automatically detect path to uif when -d is not specified.
2012-04-28 08:45:13 +12:00
09ca20c91c
Add support for read and write watchpoints.
2012-04-25 14:10:26 +12:00
7413531715
gdbc: watchpoint support.
2012-04-25 13:31:56 +12:00
a2ee047cc0
Add watchpoint support to GDB server.
...
Only read/write watchpoints are supported (set with the "awatch"
GDB command).
2012-04-25 13:31:18 +12:00
f1e99c38d3
sim: implement watchpoint support.
2012-04-25 13:31:00 +12:00
a354116441
Watchpoint support (only implemented for tilib driver).
2012-04-25 12:43:14 +12:00
a914bc732d
Add support for building on Cygwin.
...
The symbol __Windows__ is defined when building a native (non-Cygwin)
binary.
2012-04-25 11:02:22 +12:00
97f8dce833
fet: remove message 0x30.
...
This apparently isn't necessary after all, and may be the cause of the
high rate of "fuse blown" errors.
2012-03-08 09:20:25 +13:00
4e2185a408
fet: show more chip information (code/RAM ranges).
2012-03-07 10:08:01 +13:00
9f4d327c24
Support for MSP430F6736.
2012-03-07 10:06:01 +13:00
7b69f8c5e8
Version 0.19
2012-03-03 11:56:26 +13:00
39b9098b4a
Enable full buffering on stdout/stderr.
...
Now that we explicitly flush on each line, we can enable this to reduce
the number of write() calls.
2012-03-03 11:06:46 +13:00
94abe88bb1
Non-standard baud rates for FreeBSD, NetBSD.
...
This appears to work the same as it does for OpenBSD.
2012-03-03 09:57:48 +13:00
af30ea095a
olimex_iso: fix compilation warnings.
2012-03-03 09:54:11 +13:00
9cbe59d3e8
sport: add support for non-standard baud rates on OpenBSD.
2012-03-02 14:29:47 +13:00
f5f50d0fea
Fix tty driver for Olimex MSP430-JTAG-ISO.
2012-03-02 14:19:39 +13:00
e79d102937
olimex_iso: fix compiler warnings on non-Linux systems.
2012-03-02 14:13:49 +13:00
902c2903c3
Add raw USB driver for Olimex MSP430-JTAG-ISO.
2012-03-02 12:13:11 +13:00
a7a71b993f
Flush output buffer at each line
2012-03-02 11:20:56 -08:00
0581e74339
Revert "Use line-buffering on stdout, regardless of the output device."
...
This reverts commit e5028a4d83
2012-03-02 11:19:39 -08:00
cf5b7f3399
Handle non-standard baud rates in sport_open().
...
This should allow the use of the Olimex MSP430-JTAG-ISO on Windows (and
other platforms, if handling is implemented).
2012-02-29 16:59:41 +13:00
68f968a637
sport: accept baud rates as a plain integer instead of a B* constant.
...
Integer baud rates are converted to B* constants in the implementation.
2012-02-29 16:29:00 +13:00
25da331e21
olimex: fix usbtr_recv.
...
Partial sends need to skip the sent portion of the buffer before
retrying.
2012-02-29 16:08:26 +13:00
bdce08a84a
ti3410: bug fixes for USB send/receive.
...
Send was not skipping buffer position on partial writes. Receive should
not return unless data is available (or a timeout occurs).
2012-02-29 16:04:44 +13:00
Daniel Beer
Tamas TEVESZ
Sean Burford
Ingo van Lil
Peter A. Bigot
Thomas Webel
Wayne Uroda
Roland Haag
Jolan