6037c12291
Add support for Olimex firmware updates.
2012-09-11 14:35:31 +12:00
d844adf828
Separate transports from drivers.
...
The transport/ subdirectory now contains implementations of the
transport_t interface, which has been expanded to include flush and
set_modem operations.
2012-09-10 14:22:00 +12:00
c66e885899
Support for flashing or verifying raw binary files.
2012-08-30 09:16:24 +12:00
239fbb7f94
fet: don't send code memory start address with erase request.
...
Instead, use 0xfffe. This address is always within the range of main
memory, and should allow the request to work even if the chip has been
misidentified.
2012-08-23 16:14:07 +12:00
9f4bb5f303
tilib: fix breakpoint refresh.
...
If a breakpoint is set and then removed, with no refresh in between,
then no handle is ever assigned and so a request to remove the
breakpoint will fail.
2012-08-23 15:00:44 +12:00
f9d271cd64
tilib: fix calling convention for Cygwin.
...
WINAPI wasn't getting defined with gcc-3.
2012-08-23 14:27:27 +12:00
ff42788071
printc: add printf attribute.
2012-08-17 07:37:56 +12:00
53dd7f8188
Add support for MSP430F5521.
2012-08-16 08:55:13 +12:00
84866b78cc
fet: Error messages from MSP430DLLv3 version 3.2.4.5.
2012-08-15 11:34:28 +12:00
c717eed96d
device_probe_id: all output should be debug output.
2012-08-15 08:59:45 +12:00
213c892a00
Version 0.20
2012-08-14 17:24:17 +12:00
b9b2c7135f
Add documentation for "fill" command.
2012-08-14 16:48:38 +12:00
29dfb4da84
Stop using usleep().
...
Use nanosleep() on Unix-like systems, and Sleep() on Windows.
2012-08-14 15:51:22 +12:00
4ab905751c
fet: different exit procedure for FRAM devices.
...
This is a partial revert to 0e5c38231b
2012-08-10 08:34:35 +12:00
907ef86156
Added "fill" command.
2012-08-09 16:07:05 +12:00
ae9c212f37
Make device_erase a no-op for FRAM chips.
2012-08-09 15:34:06 +12:00
886fbd59c9
Probe chip ID bytes on startup.
2012-08-09 15:33:56 +12:00
377e30ea03
coff: skip over bad symbol table entries.
2012-08-01 12:20:17 +12:00
0e5c38231b
rf2500: separate reset and run on exit.
...
This was causing a problem with the MSP430FR5739. Exiting and restarting
mspdebug would cause the reset vector (0xfffe) to be overwritten with
0xff 0xff. This didn't happen if you repowered the board between the
exit and restart.
2012-08-01 11:32:19 +12:00
e02567a712
Merge F2012 and G2231
2012-07-23 09:33:44 +12:00
ad6c39a0aa
simio_timer: implement TAIV register.
2012-07-20 09:20:37 +12:00
65d15ef680
Added "verify" command.
2012-07-18 14:03:55 +12:00
5584136b69
elf32: stop section extraction after the first error.
2012-07-18 14:00:16 +12:00
1e36394136
Implemented basic GoodFET support.
2012-07-18 12:26:55 +12:00
eae3026f5a
flash_bsl: fix error with large block sizes.
2012-07-16 10:05:46 +12:00
3cc5f47304
Support for demangling of C++ symbol names.
2012-07-16 10:02:06 +12:00
69f3a15187
fet_db: updated MSP430G2452.
...
New data contributed by Marc de Hoop <marc@springuin.nl>.
2012-07-06 08:56:34 +12:00
08cd326e66
Fix support for MSP430F2618.
...
Breakpoint count is stored as a byte, not a 16-bit word.
2012-07-06 08:50:44 +12:00
fc336e78d0
Correct source bits shift offset for non-register extension word
2012-06-28 09:49:42 +12:00
19dfb6b64c
Correct pushm.a count/register adjustment
...
The adjustment was applied to the register instead of the count, causing
0x144b to decode as "PUSHM.A #4 , R12".
2012-06-28 09:49:42 +12:00
7c04f72397
Accept default length for dis above 64 kiB boundary
...
Same fix as applied for md in 27f56783
2012-06-28 09:49:41 +12:00
546d716380
fet_db: merge 2553, 2403.
...
These chips can't be distinguished by their ID data.
2012-06-27 14:46:41 +12:00
e6cb2dc51d
tilib: fix DEVICE_ERASE_MAIN.
...
The address given to the library must be one inside main memory.
2012-06-19 10:08:48 +12:00
c243ed04dc
Add support for MSP430F6435.
...
Data contributed by Marc de Hoop <marc@springuin.nl>
2012-06-15 10:13:20 +12:00
dd2c6d997c
Avoid truncating breakpoint address
...
Use of uint16_t caused the stored breakpoint address to be wrong. However,
breakpoints above 64 kiB don't seem to work even with this, so there may
also be a FET issue.
2012-06-13 09:43:04 +12:00
d0b0b04cef
Add support for MSP430G2403.
2012-06-09 11:50:23 +12:00
25f6df0d0f
fix disassembly of 20-bit calla operands
2012-06-05 12:01:53 +12:00
8fe14ca1da
Correct counts in disassembled rxxm/pushm/popm
2012-06-05 12:01:50 +12:00
eb7da81c9c
Added support for MSP430F2252.
2012-05-15 08:38:25 +12:00
31e8dabd09
Fix delay_s for Windows.
2012-05-10 11:41:00 +12:00
f44d9d5281
elf32: more portable implementation.
...
The old implementation only worked on little-endian machines, and
relied on a particular struct layout.
2012-05-10 10:00:58 +12:00
6fd161faa7
Add delay_s() for portable sleep() substitute.
2012-05-10 10:00:12 +12:00
3517710455
Fix GDB breakpoint support.
2012-04-30 08:52:12 +12:00
2ce7a82657
tilib: automatically detect path to uif when -d is not specified.
2012-04-28 08:45:13 +12:00
09ca20c91c
Add support for read and write watchpoints.
2012-04-25 14:10:26 +12:00
7413531715
gdbc: watchpoint support.
2012-04-25 13:31:56 +12:00
a2ee047cc0
Add watchpoint support to GDB server.
...
Only read/write watchpoints are supported (set with the "awatch"
GDB command).
2012-04-25 13:31:18 +12:00
f1e99c38d3
sim: implement watchpoint support.
2012-04-25 13:31:00 +12:00
a354116441
Watchpoint support (only implemented for tilib driver).
2012-04-25 12:43:14 +12:00
a914bc732d
Add support for building on Cygwin.
...
The symbol __Windows__ is defined when building a native (non-Cygwin)
binary.
2012-04-25 11:02:22 +12:00
Daniel Beer
Ingo van Lil
Tamas TEVESZ
Sean Burford
Peter A. Bigot
Thomas Webel
Wayne Uroda