98b8cbc17e
Sigma: Limit number of edge triggers to 1.
...
Actually, Sigma supports 2 rising/falling triggers,
but they are ORed and the current trigger syntax
does not permit ORed triggers.
2011-01-15 20:01:00 +01:00
31facdd3c5
Sigma: Download samples from partial chunks.
2011-01-15 19:20:31 +01:00
9996570987
Sigma: Move sigma state to device specific struct
...
Thanks to Daniel Ribeiro for contributing this patch. Some
modifications were done.
Not tested on multiple Sigmas, because of lack of hardware.
2011-01-15 17:04:21 +01:00
9be9893eed
Sigma: Check state in hw_closedev
...
If the device is closed without previously running hw_openedev
the driver crashes (happens in cleanup). This patch checks
if the device has been opened.
2011-01-15 14:13:23 +01:00
c2616fb9fa
update plugins and cli to use new DF_HEADER
2011-01-10 15:12:38 -02:00
4c046c6bcc
change all DF_LOGIC* to a single DF_LOGIC type
...
The datafeed packet has a new field 'unitsize' to denote the number of
bytes per sample in the payload.
2011-01-09 06:32:38 +01:00
bdfc7a8974
Sigma: Small cleanups.
2010-05-03 22:01:03 +02:00
36b1c8e61b
Sigma: Use software trigger to pinpoint exact sample.
2010-05-03 21:32:03 +02:00
6aac77375b
Sigma: Add state machine for tracking Sigma status.
2010-05-03 19:04:10 +02:00
a42aec7f6e
Sigma: Merge storage of rise/fall triggers.
2010-05-03 15:06:43 +02:00
4ae1f45136
Sigma: Minor cleanups.
2010-05-02 21:59:14 +02:00
11fc8d9d93
Sigma: Set capture ratio correctly.
2010-05-02 21:59:14 +02:00
c53d793f03
Sigma: 50 MHZ falling/rising edge trigger support.
...
Falling/rising edge and value/mask triggers can be combined, e.g.:
--triggers 1=0,2=r,3=1,4=1
2010-05-02 16:32:24 +02:00
f758d0744d
Sigma: Fix simple trigger LUT calculation.
2010-05-02 13:00:41 +02:00
ee492173a1
Sigma: Value/mask trigger support in 50 MHz mode.
2010-05-01 23:16:27 +02:00
eec5275e2f
Sigma: Small cleanups.
2010-05-01 23:16:18 +02:00
57bbf56b84
Sigma: Add triggers support for 100 and 200 MHz.
2010-05-01 00:00:57 +02:00
ed09fd07f7
Sigma: Minor cleanup and add more samplesrates.
2010-04-30 23:54:14 +02:00
9ddb2a125d
Sigma: Small cosmetic fixes.
2010-04-29 00:32:44 +02:00
edca2c5c22
Sigma: Support for low samplerates
...
Lowest samplerate supported in driver is 250 KHz
2010-04-28 22:45:13 +02:00
f78898e947
Sigma: Support 50 and 200 MHz modes
2010-04-28 21:24:41 +02:00
a8116d764b
Sigma: Rename firmware files
2010-04-28 21:20:27 +02:00
e8397563a2
Sigma: Upload 50, 100 or 200 MHz firmware
2010-04-28 20:01:15 +02:00
f6564c8d19
Sigma: Move upload firmware into a function
2010-04-28 19:51:13 +02:00
fefa18001a
ASIX SIGMA: Coding style fixes (via indent mostly).
...
Also, end all/most comments with full stop and avoid variable/array
definitions in the middle of functions.
2010-04-28 00:17:28 +02:00
911f18341b
ASIX Sigma: Use common license header format.
2010-04-27 22:44:15 +02:00
28a35d8ab3
This commit adds initial support for the Asix Sigma Logic Analyzer. Currently, only 200 MHz is supported, and only with software trigger. Firmware for the device will be distributed separately, with permission from the vendor.
...
Signed-off-by: Håvard Espeland <gus@ping.uio.no>
2010-04-27 13:16:01 -07:00
Håvard Espeland
Daniel Ribeiro
Bert Vermeulen
Håvard Espeland
Uwe Hermann