This adds support for the Mooshim Engineering BLE based Mooshimeter.
Because the meter requires raw BLE packets, the driver uses the BLE
layer directly. Since the meter has no physical way of configuring it,
the actual configuration is set entirely with sigrok device options.
Add more examples of conn= specs for HID and Bluetooth devices to the
section which discusses COM ports. Outline the formal syntax and its
optional fields. Discuss how colons in device addresses interfere with
"-d <drv>:conn=<spec>" environments.
Slightly rephrase README.devices since there is no strict distinction
into "fully automatic" and "always manual". Some drivers _accept_ conn=
specs when provided, _and_ support automatic detection of enumerable
devices, _and_ might implement defaults but also support overrides.
Nit, numerically sort the list of Uni-T cables (which is about to grow
in the future) for improved readability.
Add two more devices which require users to manually enable the serial
communication (Brymen BM257s, EEVBlog 121GW).
The conn= specification is not strictly related to RS232 communication.
Provide examples for other USB specs (as they are used for some DMM and
LCR drivers), as well as TCP and VXI (which are often found with MSO
drivers).
Remove vague statements from the README. On all current distributions,
the udev paths are identical, anyone deliberately deviating from the
defaults should be able to handle it by themselves.
Rules in /etc/udev/rules.d/ should only be used for customization, or
for locally built packages.
This driver is neither working nor has it been in a compiling state for
a long time, so unhook it from the build until it is fixed and works.
The files (api.c and protocol.[ch]) are still in git, but won't end up in
released tarballs and they don't get built (neither git nor tarballs).
This also allows us to drop the otherwise unneeded dependency on libudev.
When the MSO-19 driver comes back, it should be in a form that doesn't
require the inherently Linux-only libudev anyway. See also:
http://sigrok.org/bugzilla/show_bug.cgi?id=65
These two drivers are currently unfinished and don't work, so disable
and "unhook" them for now in preparation of the next libsigrok release.
They're still in the git repository, but not hooked up to the build
system, so that they won't get detected or built, and also don't end up
in the release tarball.
Since link-mso19 is the only driver that currently requires libudev,
drop any reference to that, too.
It should be relatively easy to apply this patch in reverse after the
release to bring back both drivers.
These two drivers are currently unfinished and don't work, so disable
and "unhook" them for now in preparation of the next libsigrok release.
They're still in the git repository, but not hooked up to the build
system, so that they won't get detected or built, and also don't end up
in the release tarball.
Since link-mso19 is the only driver that currently requires libudev,
drop any reference to that, too.
It should be relatively easy to apply this patch in reverse after the
release to bring back both drivers.
Uwe Hermann
Derek Hageman
Gerhard Sittig
Stefan Brüns
Soeren Apel
magnuskarlsson
Aurelien Jacobs
Matthias Heidbrink
Matthias Heidbrink
Martin Ling