The hard-coded location is bound to be wrong anyway. Instead, rely
on the new resource lookup code to find the firmware files in a
location relative to the library or executable.
The resource API provides a generic means for accessing resources
that are bundled with sigrok, such as device firmware files. Since
the manner of resource bundling is platform-dependent, users of
libsigrok may override the functions used to open, close and read
a resource. The default implementation accesses resources as files
located in one of the XDG data directories or a directory defined
at compile time.
This is set to | (or left empty) by SR_PROG_MAKE_ORDER_ONLY for
portability reasons, since not all Make implementations support
order-only prerequisites.
Extend setup.py to allow environment variables to be set on the
command line. Use that functionality to replace the pkg-config
invocations with flags passed on from make. Suppress the annoying
-Wstrict-prototypes warning by overriding the OPT variable.
Also move the "cd bindings/python" from Makefile.am to setup.py
to side-step problems with "cd" in make rules.
This also fixes bug #628.
This basically makes glibc expose the same set of features as
if gcc was invoked without any restricting -std=c* option. Unlike
_GNU_SOURCE however, it does not enable GNU-specific extensions.
So, with this macro defined the behavior of Linux with glibc
should match that of other platforms.
In order to avoid confusion of the flags-gathering pkg-config
result with the actual test for the availability of "check",
change the pkg-config output variable prefix from CHECK to TESTS.
Put the extra libraries into SR_EXTRA_LIBS instead of LIBS.
Create an SR_CHECK_LIBS macro to make that easy. Substitute
SR_EXTRA_LIBS into libsigrok.pc, too.
Introduce the SR_CHECK_COMPILE_FLAGS macro and use it to check
for additional compiler flags. Put the accepted flags into the
separate substitution variable SR_EXTRA_CFLAGS.
With this and the preceding changes, bug #578 should now be fixed.
Use the SR_ARG_ENABLE_WARNINGS macro to configure and check for
the availability of compiler warning flags. Maintain separate
sets of warning flags for C and C++.
The configure option --enable-warnings=[min|max|fatal|no] can
be used to set the compiler warning level for all languages.
The default level is "max".
Although useful, makes other than GNU make do not like this.
Name the prerequisite explicitly instead, and circumvent any
VPATH substitution other makes may do.
version.h and enums.hpp are generated at build time and should
not be included in the distribution tarball. This seems to have
triggered a weird error when doing a VPATH build of the dist
tarball.
It seems automake automatically adds the directory containing
the generated version.h to the include path. Use nostdinc to
disable default includes altogether.
Move the include flags for files in the source tree from
configure.ac to Makefile.am where they belong. Also use
AM_CPPFLAGS instead of CFLAGS/CXXFLAGS to make sure the
files in the build/source tree are always picked up first.
Also, remove the include/libsigrok sub-directory from the
search path, thereby making the <libsigrok/> prefix mandatory
when building libsigrok itself. This matches the convention
already imposed on users of the library.
Since the DER EE DE-5000 driver is currently the only user of
the es51919 module and it depends on the libserialport, compile
the module only if the DER EE DE-5000 driver is enabled. This
allows libsigrok to be built without libserialport again.
Add a driver for the DER EE DE-5000 LCR meter. This meter is based on
the Cyrustek ES51919/ES51920 chipset and communicates with the host
computer via an optional connectivity kit.
The kit uses an optoisolated unidirectional link to connect to the
meter and an USB cable on the host side. Internally the connection is
using the FTDI FT232R USB UART chip i.e. from the host computer point
of view the meter is connected into an RS-232 serial port.
This driver implements just a thin shim layer for registering the
driver and uses the es51919 module for all the actual work.
Add a protocol decoder for the Cyrustek ES51919 LCR meter chip.
This chipset (together with ES51920 front-end) is supposedly used
by multiple different portable LCR meters including at least
DER EE DE-5000, Yihua V&A VA520, Mastech MS5308, Uni-T UT612,
CEM DT-9935 and various OEM rebadges of them.
The communication protocol seems to be implemented on the Cyrustek
chip itself so all the different models are expected to use the
same protocol if they implement a host connection. Unfortunately
the protocol is not available in the public documentation of the
chipset, so this implementation is based on reverse engineering it
from traffic captures.
The actual connection between the meter and the host computer may be
different from meter to meter even when based on the same chip. This
module implements a decoder for the protocol and some common helper
functions for interfacing with the meter via an RS-232 serial port.
libgpib is the userspace component to linux-gpib's kernel modules that
implement low-level interface drivers.
When libsigrok gets userspace GPIB interface drivers, that backend will
be the "official" scpi_gpib.
This silences stuff like this (among others), depending on the
Doxygen version used:
Warning: Tag `XML_SCHEMA' at line 1814 of file `Doxyfile' has become
obsolete. To avoid this warning please remove this line from your
configuration file or upgrade it using "doxygen -u"
The Brymen BM25x series supports the BC-20X that is an opto-isolated
serial cable. The link seems to be unidirectional i.e. when activated
the DMM periodically sends updates to the host while the host cannot
control the DMM in any way.
The protocol is documented in "6000-count-digital-multimeters-r1.pdf"
that is available from the manufacturer. Every 15 byte packet consists
of a bitmap where the bits correspond to segments or symbols on the
LCD display i.e. the DMM essentially sends the contents of its screen
to the host in every update. This driver then decodes the measured
quantity, unit and its value from the bitmap.
This is needed so that the C++ bindings, the header for which
references "libsigrok/libsigrok.h", can have a valid include
directory passed to build them before the headers are installed.
The new triggers consist of a set of structs and an API to manipulate
them. Both logic and analog triggers are supported, in an unlimited
number of stages.
A single struct sr_trigger containing its stages and triggers is then
added to the session.
In case of a driver where the hardware supports triggering, the struct
is then converted and used to arm the hardware trigger. Drivers without
hardware trigger support, such as fx2lafw or multimeter drivers, use it
as the basis for a software-based trigger implementation instead.
This driver is neither working nor has it been in a compiling state for
a long time, so unhook it from the build until it is fixed and works.
The files (api.c and protocol.[ch]) are still in git, but won't end up in
released tarballs and they don't get built (neither git nor tarballs).
This also allows us to drop the otherwise unneeded dependency on libudev.
When the MSO-19 driver comes back, it should be in a form that doesn't
require the inherently Linux-only libudev anyway. See also:
http://sigrok.org/bugzilla/show_bug.cgi?id=65
This driver has been unmaintained for years, and was never good code
to begin with. It's also questionable whether it was ever useful,
particularly with the demo driver now supporting various analog
signalling.
Instead of >= 44 Makefile.am's we now only have one top-level
Makefile.am, and use the 'subdir-objects' automake option to
handle the build via non-recursive (auto)make.
This has the advantage of fewer (boilerplate or other) files and less
clutter in general, as well as performance advantages since the new
setup can build many files in parallel (with 'make -j'), not only 2 or 3
files within the same (e.g. hardware/xxxx/* subdirectory) and also since
we no longer need to build intermediate libtool helper libs per subdirectory.
A quick, non-scientific test build on a quad-core laptop with 'make -j 4'
yields a build time reduction from 35s to 19s.
All autotools features that worked before are still intact without any
regressions, including the Make targets 'install', 'uninstall', 'check',
'dist', 'clean', 'distclean' and so on, as well as all the usual portability
handling (build works on any OS, with any Make implementation such as
GNU Make or BSD Make, with any shell such as sh/ksh/zsh/bash/dash, etc. etc.)
and features such as out-of-tree build support, cross-compile support,
testsuite support (also with colored output), "silent make rules", etc. etc.
This adds a suite of unit tests for libsigrok. It uses the 'Check'
tool/library (apt-get install check) to run the tests.
The configure tool tries to find libcheck. If it succeeds, a
"make check" will run all tests. Otherwise, none of the tests will
be built and "make check" will not run any tests.
This also means that users who don't have 'check' installed will still
be able to build and install libsigrok just fine.
All frontends will have to include <libsigrok/libsigrok.h> from now on.
This header includes proto.h and version.h, both installed from the
distribution into $INCLUDE/libsigrok/ as well.
The only dynamically changed header is now version.h, which has both
libsigrok and libtool compile-time versions in it.
We no longer expect firmware files to be in the
$prefix/share/libsigrok/firmware directory, as that would require an
additional (distro) package 'sigrok-firmware' or the like to install
files into another package's (libsigrok) path, which can be problematic.
The current 'sigrok-firmware' repo's "make install" will already install
all files into $prefix/share/sigrok-firmware.
If the (generated) ChangeLog file is marked for DISTCLEANFILES, it'll be
removed whenever "make distclean" is called (and is then gone forever if
you use the tarballs, for example).
Hannu Vuolasaho
Daniel Elstner
Martin Lederhilger
Uwe Hermann
Daniel Glöckner
Martin Ling
Bert Vermeulen
Jiří Pinkava
Aurelien Jacobs
Bartosz Golaszewski
Uffe Jakobsen
Janne Huttunen
Marcus Comstedt
Soeren Apel
magnuskarlsson
Kumar Abhishek
Matthias Heidbrink
Alexandru Gagniuc