56d0d24535
Rename sr_probe_new() to sr_channel_new().
...
This fixes parts of bug #259 .
2014-03-25 20:58:54 +01:00
ba7dd8bbb8
Replace 'probe' with 'channel' in most places.
...
Also, consistently use 'ch' for channel variables. This matches how we
consistently use sdi, devc, and so on all over the code-base.
This fixes parts of bug #259 .
2014-03-25 20:58:54 +01:00
91aea754aa
Rename 'struct sr_probe' to 'struct sr_channel' everywhere.
...
This fixes parts of bug #259 .
2014-03-25 20:58:54 +01:00
53b4680fce
Consistently use 'cg' for channel group variables.
...
This matches how we consistently use sdi, devc, and so on all over
the code-base.
This fixes parts of bug #259 .
2014-03-25 20:58:54 +01:00
a68bf88e3a
Replace channel_group.probes with channel_group.channels.
...
This fixes parts of bug #259 .
2014-03-25 20:58:54 +01:00
40fd0264f9
Replace some 'pg' with 'cg'.
...
(since 'probe groups' are now called 'channel groups')
This fixes parts of bug #259 .
2014-03-25 20:58:54 +01:00
660e398fe9
Replace 'probe group' with 'channel group' everywhere.
...
The name 'probe' (and thus 'probe group') is a relic from the times when
sigrok was mostly about logic analyzers. Nowadays we support a lot more
device types where 'probe' is not really a good term and 'channel' is
much better suited.
This fixes parts of bug #259 .
2014-03-25 20:58:54 +01:00
3fd2dca207
hameg-hmo: Add missing cases in config_get().
2014-03-25 20:48:58 +01:00
bbabdaf1e2
hameg-hmo: Add the TRIGGER_SLOPE entry to config_list().
2014-03-25 20:48:58 +01:00
422a1c0d58
hameg-hmo: Fix the logic for the horizontal trigger position in config_set()
...
This patch fixes the logic calculating the trigger position as well as the
(hopefully) last remaining locale issue.
2014-03-25 20:48:58 +01:00
e83437ae20
serial-dmm: Implemented support for Voltcraft M-3650CR (driver voltcraft-m3650cr).
2014-03-24 22:57:27 +01:00
1656e47def
serial-dmm: Implemented support for Voltcraft ME-42 (driver voltcraft-me42).
2014-03-24 17:42:52 +01:00
67bd805523
Switch to a non-recursive automake setup.
...
Instead of >= 44 Makefile.am's we now only have one top-level
Makefile.am, and use the 'subdir-objects' automake option to
handle the build via non-recursive (auto)make.
This has the advantage of fewer (boilerplate or other) files and less
clutter in general, as well as performance advantages since the new
setup can build many files in parallel (with 'make -j'), not only 2 or 3
files within the same (e.g. hardware/xxxx/* subdirectory) and also since
we no longer need to build intermediate libtool helper libs per subdirectory.
A quick, non-scientific test build on a quad-core laptop with 'make -j 4'
yields a build time reduction from 35s to 19s.
All autotools features that worked before are still intact without any
regressions, including the Make targets 'install', 'uninstall', 'check',
'dist', 'clean', 'distclean' and so on, as well as all the usual portability
handling (build works on any OS, with any Make implementation such as
GNU Make or BSD Make, with any shell such as sh/ksh/zsh/bash/dash, etc. etc.)
and features such as out-of-tree build support, cross-compile support,
testsuite support (also with colored output), "silent make rules", etc. etc.
2014-03-20 13:10:05 +01:00
9ad05e6cd2
scpi_usbtmc_libusb.c: Fix two error checks.
...
Two error checks had a missing "ret = ", which lead to an incorrect
value being passed to libusb_error_name().
Also, lower the level for those messages from sr_err() to sr_dbg()
since they're not fatal.
2014-03-11 19:48:47 +01:00
d8cbd659ce
scpi_usbtmc_libusb.c: Consistently check for < 0 (libusb calls).
2014-03-11 19:48:00 +01:00
a84f6ad389
Fix 'aquisition' typo in a few places.
2014-03-11 19:42:20 +01:00
7f7f6a2e0c
gmc-mh-1x-2x: Whitespace fixes (cosmetic).
2014-03-08 11:04:27 +01:00
dc05dd6069
visa: Fixed missing header warnings/uninitialized variable.
2014-03-08 10:56:16 +01:00
d1d3b7dff9
gmc-mh-1x-2x: Cosmetic fixes for Metrahit 25S.
2014-03-08 10:50:21 +01:00
c6c63b08af
gmc-mh-1x-2x: Fixed 300 µA range scaling.
2014-03-08 10:40:38 +01:00
0bc3ab92e6
Fluke189 support
...
I can confirm that the 189 uses the same "QM" command as the 187:
<-- QM\r
--> QM,+03.225 mV AC
2014-03-05 12:33:14 +01:00
0ab702601d
brymen-bm86x: Remove std_dev_clear() wrapper.
2014-02-28 13:13:09 +01:00
ecaa89af0e
brymen-bm86x: actual driver implementation
2014-02-27 22:50:09 +01:00
8d9c8554a5
brymen-bm86x: Initial driver skeleton.
2014-02-27 22:50:09 +01:00
a66307424e
Remove std_dev_clear() wrappers from drivers.
2014-02-26 21:37:18 +01:00
0294a409b8
conrad-digi-35-cpu: Add missing Makefile.am, minor cosmetics.
2014-02-12 15:29:14 +01:00
c6a2843a58
conrad-digi-35-cpu: Implemented driver.
2014-02-12 15:10:07 +01:00
823b4e5817
conrad-digi-35-cpu: Initial driver framework.
2014-02-12 15:10:06 +01:00
a90061e5d1
gmc-mh-1x-2x: Shorten driver names a bit.
2014-02-12 15:04:54 +01:00
fadd07072b
gmc-mh-1x-2x: Support for interface SI232-II with driver gmc-mh-2x-bd232.
2014-02-11 18:05:25 +01:00
c90beca780
gmc-mh-1x-2x: Added new driver gmc-mh-2x-bd232.
2014-02-11 18:05:25 +01:00
6392d5992b
gmc-mh-1x-2x: Cleanup, docs, minor fixes.
2014-02-11 18:04:54 +01:00
d8b6b28b80
scpi_visa: Add missing callback parameter.
...
(scpi_visa_dev_inst_new): Fix serious compiler warning due to
missing drvc parameter in prototype.
2014-02-07 20:20:20 +01:00
52f6951c4e
scpi_usbtmc_libusb: Consistent libusb error handling.
2014-02-07 19:42:27 +01:00
ed840c8612
scpi: Disable scpi_usbtmc in favor of scpi_usbtmc_libusb for now.
...
Having both in the list will "find" the same device twice.
2014-02-07 19:01:45 +01:00
2a0f6924d2
usb: remove unused sr_usb_find_usbtmc()
2014-02-07 18:53:04 +01:00
20ed3ceee7
scpi: add a libusb based implementation of usbtmc
2014-02-07 18:53:04 +01:00
ca28abd6a5
hameg-hmo: use the new scpi scan API
2014-02-07 18:53:04 +01:00
9d3ae01b37
rigol-ds: use the new scpi scan API
2014-02-07 18:53:04 +01:00
b541f8376d
scpi: add a generic scan API and implement it in usbtmc and serial transport
...
note that sr_usb_find_serial() is copied from the hameg-hmo driver
2014-02-07 18:53:04 +01:00
17bdda5868
scpi: add a struct drv_context parameter to scpi_dev_inst_new()
2014-02-07 18:53:04 +01:00
6e94eb4142
rigol-ds: apply :KEY:LOCK DISABLE only to DS1K
2014-02-07 18:53:04 +01:00
3918fbb0cf
rigol-ds: properly end WAIT_TRIGGER event handling
2014-02-07 18:53:04 +01:00
83dbd9f09c
rigol-ds: properly deal with dev_close() getting called multiple times
2014-02-07 18:53:04 +01:00
7ad4e2b80b
scpi_visa.c: Minor cosmetics.
2014-02-03 00:24:13 +01:00
1fb2312f99
Add librevisa SCPI backend.
2014-02-02 22:42:25 +01:00
a6c12f3f70
Drop unneeded comments.
2014-01-30 17:52:44 +01:00
6358f0a956
sysclk-lwla: Implement SR_CONF_CLOCK_EDGE setting.
2014-01-30 12:04:42 +01:00
625763e2c2
ols: Code cleanup and more debug output.
2014-01-30 11:58:07 +01:00
016e72f30e
ols: Fix endianness problems in protocol.
2014-01-29 15:34:24 +01:00
Uwe Hermann
poljar (Damir Jelić)
Matthias Heidbrink
Fabio
Aurelien Jacobs
Bert Vermeulen
Matthias Heidbrink
Daniel Elstner
Martin Ling