Uwe Hermann
61e77667de
hameg-hmo: Change some PG_/pg_ names to CG_/cg_.
...
This fixes parts of bug #259 .
2014-03-25 21:02:05 +01:00
Uwe Hermann
fca75cbb74
A few more random 'probe' to 'channel' changes.
...
This fixes parts of bug #259 .
2014-03-25 20:58:54 +01:00
Uwe Hermann
f3ca73edd2
Rename a few more API calls with 'probe' in their name.
...
This fixes parts of bug #259 .
2014-03-25 20:58:54 +01:00
Uwe Hermann
3f239f0803
Rename various *PROBE* macros to *CHANNEL*.
...
This fixes parts of bug #259 .
2014-03-25 20:58:54 +01:00
Uwe Hermann
56d0d24535
Rename sr_probe_new() to sr_channel_new().
...
This fixes parts of bug #259 .
2014-03-25 20:58:54 +01:00
Uwe Hermann
ba7dd8bbb8
Replace 'probe' with 'channel' in most places.
...
Also, consistently use 'ch' for channel variables. This matches how we
consistently use sdi, devc, and so on all over the code-base.
This fixes parts of bug #259 .
2014-03-25 20:58:54 +01:00
Uwe Hermann
91aea754aa
Rename 'struct sr_probe' to 'struct sr_channel' everywhere.
...
This fixes parts of bug #259 .
2014-03-25 20:58:54 +01:00
Uwe Hermann
53b4680fce
Consistently use 'cg' for channel group variables.
...
This matches how we consistently use sdi, devc, and so on all over
the code-base.
This fixes parts of bug #259 .
2014-03-25 20:58:54 +01:00
Uwe Hermann
a68bf88e3a
Replace channel_group.probes with channel_group.channels.
...
This fixes parts of bug #259 .
2014-03-25 20:58:54 +01:00
Uwe Hermann
40fd0264f9
Replace some 'pg' with 'cg'.
...
(since 'probe groups' are now called 'channel groups')
This fixes parts of bug #259 .
2014-03-25 20:58:54 +01:00
Uwe Hermann
660e398fe9
Replace 'probe group' with 'channel group' everywhere.
...
The name 'probe' (and thus 'probe group') is a relic from the times when
sigrok was mostly about logic analyzers. Nowadays we support a lot more
device types where 'probe' is not really a good term and 'channel' is
much better suited.
This fixes parts of bug #259 .
2014-03-25 20:58:54 +01:00
poljar (Damir Jelić)
3fd2dca207
hameg-hmo: Add missing cases in config_get().
2014-03-25 20:48:58 +01:00
poljar (Damir Jelić)
bbabdaf1e2
hameg-hmo: Add the TRIGGER_SLOPE entry to config_list().
2014-03-25 20:48:58 +01:00
poljar (Damir Jelić)
422a1c0d58
hameg-hmo: Fix the logic for the horizontal trigger position in config_set()
...
This patch fixes the logic calculating the trigger position as well as the
(hopefully) last remaining locale issue.
2014-03-25 20:48:58 +01:00
Matthias Heidbrink
e83437ae20
serial-dmm: Implemented support for Voltcraft M-3650CR (driver voltcraft-m3650cr).
2014-03-24 22:57:27 +01:00
Matthias Heidbrink
1656e47def
serial-dmm: Implemented support for Voltcraft ME-42 (driver voltcraft-me42).
2014-03-24 17:42:52 +01:00
Uwe Hermann
36cf5b5445
Makefile.am: Add missing vxi.h.
...
If it's not listed as SOURCE, it won't end up in the tarball and a build
from tarball would thus break.
2014-03-20 13:10:53 +01:00
Uwe Hermann
67bd805523
Switch to a non-recursive automake setup.
...
Instead of >= 44 Makefile.am's we now only have one top-level
Makefile.am, and use the 'subdir-objects' automake option to
handle the build via non-recursive (auto)make.
This has the advantage of fewer (boilerplate or other) files and less
clutter in general, as well as performance advantages since the new
setup can build many files in parallel (with 'make -j'), not only 2 or 3
files within the same (e.g. hardware/xxxx/* subdirectory) and also since
we no longer need to build intermediate libtool helper libs per subdirectory.
A quick, non-scientific test build on a quad-core laptop with 'make -j 4'
yields a build time reduction from 35s to 19s.
All autotools features that worked before are still intact without any
regressions, including the Make targets 'install', 'uninstall', 'check',
'dist', 'clean', 'distclean' and so on, as well as all the usual portability
handling (build works on any OS, with any Make implementation such as
GNU Make or BSD Make, with any shell such as sh/ksh/zsh/bash/dash, etc. etc.)
and features such as out-of-tree build support, cross-compile support,
testsuite support (also with colored output), "silent make rules", etc. etc.
2014-03-20 13:10:05 +01:00
Uwe Hermann
9ad05e6cd2
scpi_usbtmc_libusb.c: Fix two error checks.
...
Two error checks had a missing "ret = ", which lead to an incorrect
value being passed to libusb_error_name().
Also, lower the level for those messages from sr_err() to sr_dbg()
since they're not fatal.
2014-03-11 19:48:47 +01:00
Uwe Hermann
d8cbd659ce
scpi_usbtmc_libusb.c: Consistently check for < 0 (libusb calls).
2014-03-11 19:48:00 +01:00
Uwe Hermann
a84f6ad389
Fix 'aquisition' typo in a few places.
2014-03-11 19:42:20 +01:00
Aurelien Jacobs
846fb172db
brymen-bm86x: disable driver when libusb is not present
2014-03-09 23:09:47 +01:00
Matthias Heidbrink
7f7f6a2e0c
gmc-mh-1x-2x: Whitespace fixes (cosmetic).
2014-03-08 11:04:27 +01:00
Matthias Heidbrink
dc05dd6069
visa: Fixed missing header warnings/uninitialized variable.
2014-03-08 10:56:16 +01:00
Matthias Heidbrink
d1d3b7dff9
gmc-mh-1x-2x: Cosmetic fixes for Metrahit 25S.
2014-03-08 10:50:21 +01:00
Matthias Heidbrink
c6c63b08af
gmc-mh-1x-2x: Fixed 300 µA range scaling.
2014-03-08 10:40:38 +01:00
Fabio
0bc3ab92e6
Fluke189 support
...
I can confirm that the 189 uses the same "QM" command as the 187:
<-- QM\r
--> QM,+03.225 mV AC
2014-03-05 12:33:14 +01:00
Joel Holdsworth
8c9d4d67f8
Fixed session_driver so that it can run more than one session.
2014-03-01 11:23:08 +00:00
Uwe Hermann
0ab702601d
brymen-bm86x: Remove std_dev_clear() wrapper.
2014-02-28 13:13:09 +01:00
Uwe Hermann
1b950bc79c
configure.ac: Move Brymen BM86X snippet to correct place.
2014-02-28 13:08:53 +01:00
Aurelien Jacobs
ecaa89af0e
brymen-bm86x: actual driver implementation
2014-02-27 22:50:09 +01:00
Aurelien Jacobs
8d9c8554a5
brymen-bm86x: Initial driver skeleton.
2014-02-27 22:50:09 +01:00
Daniel Elstner
8bbdd364d3
session: Always read a whole number of samples.
2014-02-26 21:38:41 +01:00
Bert Vermeulen
a66307424e
Remove std_dev_clear() wrappers from drivers.
2014-02-26 21:37:18 +01:00
Bert Vermeulen
824fba0341
session: Implement dev_clear().
2014-02-26 21:35:33 +01:00
Bert Vermeulen
8102cee4d4
device: sr_dev_clear() now always works.
...
If the driver does not provide a dev_clear() function, the wrapper
now calls std_dev_clear() instead.
2014-02-26 21:34:58 +01:00
Uwe Hermann
0294a409b8
conrad-digi-35-cpu: Add missing Makefile.am, minor cosmetics.
2014-02-12 15:29:14 +01:00
Matthias Heidbrink
c6a2843a58
conrad-digi-35-cpu: Implemented driver.
2014-02-12 15:10:07 +01:00
Matthias Heidbrink
823b4e5817
conrad-digi-35-cpu: Initial driver framework.
2014-02-12 15:10:06 +01:00
Uwe Hermann
a90061e5d1
gmc-mh-1x-2x: Shorten driver names a bit.
2014-02-12 15:04:54 +01:00
Matthias Heidbrink
fadd07072b
gmc-mh-1x-2x: Support for interface SI232-II with driver gmc-mh-2x-bd232.
2014-02-11 18:05:25 +01:00
Matthias Heidbrink
c90beca780
gmc-mh-1x-2x: Added new driver gmc-mh-2x-bd232.
2014-02-11 18:05:25 +01:00
Matthias Heidbrink
67eb6bcbe6
hwdriver.c: Update/extend some Doxygen comments.
2014-02-11 18:05:00 +01:00
Matthias Heidbrink
6392d5992b
gmc-mh-1x-2x: Cleanup, docs, minor fixes.
2014-02-11 18:04:54 +01:00
Matthias Heidbrink
813aab691b
Update/extend some Doxygen comments.
2014-02-11 18:04:46 +01:00
Daniel Elstner
d8b6b28b80
scpi_visa: Add missing callback parameter.
...
(scpi_visa_dev_inst_new): Fix serious compiler warning due to
missing drvc parameter in prototype.
2014-02-07 20:20:20 +01:00
Uwe Hermann
52f6951c4e
scpi_usbtmc_libusb: Consistent libusb error handling.
2014-02-07 19:42:27 +01:00
Uwe Hermann
ed840c8612
scpi: Disable scpi_usbtmc in favor of scpi_usbtmc_libusb for now.
...
Having both in the list will "find" the same device twice.
2014-02-07 19:01:45 +01:00
Aurelien Jacobs
2a0f6924d2
usb: remove unused sr_usb_find_usbtmc()
2014-02-07 18:53:04 +01:00
Aurelien Jacobs
20ed3ceee7
scpi: add a libusb based implementation of usbtmc
2014-02-07 18:53:04 +01:00