Reading a frame over the DS1xx2 RS232 connection now sometimes works,
but most of the time stalls part way through with g_poll showing the
fd as not ready.
This patch adds a function for a common operation of all serial based drivers.
It extracts the serial options from the options linked list that is passed down
to every hardware driver.
This patch adds a function to read and parse a SCPI response which contains a
comma separated list of unsignet 8-bit integer numbers (e.g "1,0,64").
This is particularly useful if the instrument sends digital measurement data
in this format.
This patch adds a function to read and parse a SCPI response which contains a
comma-separated list of floating-point numbers (e.g. "1.0e-5,2.0e-4,3.0e-3").
This is particularly useful if the instrument sends analog measurement
data in this format.
The SCPI standard specifies the "*OPC?" command (Operation complete query) which
queries the instrument for its operative state. When all pending operations are
complete, the instrument responds with a "1".
Some manufacturers block before completing all operations and don't respond
with anything and some of them respond with a "0". This function handles both
cases uniformly.
This patch adds helper functions to read an SCPI response and parse the response
as an integer, boolean, floating-point or double-precision floating-point number.
The Standard Commands for Programmable Instruments (SCPI) defines a standard
for syntax and commands to use in controlling programmable test and measurement
devices.
SCPI documentation:
http://www.ivifoundation.org/docs/scpi-99.pdf
This patch adds helper functions for sending SCPI commands, reading a SCPI
response and reading and parsing a SCPI "*IDN?" response.
SR_CONF_PATTERN_MODE was not handled in config_list(), yielding
non-working OLS support in PulseView (due to an assert), and a missing
pattern list in sigrok-cli's --show output.
This fixes bug #184.
The scan() function was opening the port in non-blocking mode, the dev_open()
function however was not using the SERIAL_NONBLOCK flag. This led to hangs
in certain situations.
This fixes the OLS e.g. on NetBSD.
A new sp_port is created every time we call serial_open (sp_get_port_by_name
implicitly creates one for us), so free it every time we call serial_close.
Without a SR_DF_END samples could be cached in the internal buffer of an output
module and never flushed, therefore they would be missing in the final output.
By sending a SR_DF_END packet we force the output to be flushed.
Disable drivers that need serial port support if libserialport is not found.
Also, disable building various other serial port related code in that case.
The bandwith in Rigol DS1xx2D/E scopes can be upgraded to 150 MHz in software.
So detect also scopes with the upgraded bandwith.
using libsigrok-0.2.1 + this change + commit da970d24ec (required for newer kernels):
[dan@eagle sigrok]$ sigrok-cli --scan -d rigol-ds1xx2 -l 5
sr: libsigrok loglevel set to 5.
sr: Sanity-checking all drivers.
sr: Sanity-checking all input modules.
sr: Sanity-checking all output modules.
srd: libsigrokdecode loglevel set to 5.
sr: hwdriver: Initializing driver 'rigol-ds1xx2'.
sr: serial: Opening serial port '/dev/usbtmc0' (flags 1).
sr: serial: Opened serial port '/dev/usbtmc0' (fd 7).
sr: serial: Wrote 5/5 bytes (fd 7).
sr: serial: Closing serial port /dev/usbtmc0 (fd 7).
sr: rigol-ds1xx2: response: /dev/usbtmc0 [Rigol Technologies,DS1152D,DS1EU150XXXXXX,00.04.01.00.02]
sr: hwdriver: Scan of 'rigol-ds1xx2' found 1 devices.
The following devices were found:
rigol-ds1xx2 - Rigol Technologies DS1152D 00.04.01.00.02 with 18 probes: CH1 CH2 D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 D14 D15
Most Metex DMMs use e.g. " mV" as unit field, others use "mV ",
though. Support these (and other) whitespace variants by stripping all
spaces and only comparing non-space characters.
Bert Vermeulen
Martin Ling
Uwe Hermann
poljar (Damir Jelić)
poljar (Damir Jelić)
Matthias Heidbrink
Dan Horák
Sean Young
Aurelien Jacobs