kicad/common/CMakeLists.txt

674 lines
19 KiB
CMake
Raw Normal View History

# Add all the warnings to the files
if( COMPILER_SUPPORTS_WARNINGS )
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${WARN_FLAGS_CXX}")
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${WARN_FLAGS_C}")
endif()
if( KICAD_SPICE )
set( INC_AFTER ${INC_AFTER} ${NGSPICE_INCLUDE_DIR} )
endif()
include_directories( BEFORE ${INC_BEFORE} )
include_directories(
./dialogs
./widgets
./dialog_about
${CMAKE_SOURCE_DIR}/bitmaps_png
${CMAKE_SOURCE_DIR}/3d-viewer
${CMAKE_SOURCE_DIR}/pcbnew
${INC_AFTER}
)
# Get the GAL Target
add_subdirectory( gal )
2013-08-10 09:14:16 +00:00
# Only for win32 cross compilation using MXE
if( WIN32 AND MSYS )
add_definitions( -DGLEW_STATIC )
endif()
Introduction of Graphics Abstraction Layer based rendering for pcbnew. New classes: - VIEW - represents view that is seen by user, takes care of layer ordering & visibility and how it is displayed (which location, how much zoomed, etc.) - VIEW_ITEM - Base class for every item that can be displayed on VIEW (the biggest change is that now it may be necessary to override ViewBBox & ViewGetLayers method for derived classes). - EDA_DRAW_PANEL_GAL - Inherits after EDA_DRAW_PANEL, displays VIEW output, right now it is not editable (in opposite to usual EDA_DRAW_PANEL). - GAL/OPENGL_GAL/CAIRO_GAL - Base Graphics Abstraction Layer class + two different flavours (Cairo is not fully supported yet), that offers methods to draw primitives using different libraries. - WX_VIEW_CONTROLS - Controller for VIEW, handles user events, allows zooming, panning, etc. - PAINTER/PCB_PAINTER - Classes that uses GAL interface to draw items (as you may have already guessed - PCB_PAINTER is a class for drawing PCB specific object, PAINTER is an abstract class). Its methods are invoked by VIEW, when an item has to be drawn. To display a new type of item - you need to implement draw(ITEM_TYPE*) method that draws it using GAL methods. - STROKE_FONT - Implements stroke font drawing using GAL methods. Most important changes to Kicad original code: * EDA_ITEM now inherits from VIEW_ITEM, which is a base class for all drawable objects. * EDA_DRAW_FRAME contains both usual EDA_DRAW_PANEL and new EDA_DRAW_PANEL_GAL, that can be switched anytime. * There are some new layers for displaying multilayer pads, vias & pads holes (these are not shown yet on the right sidebar in pcbnew) * Display order of layers is different than in previous versions (if you are curious - you may check m_galLayerOrder@pcbnew/basepcbframe.cpp). Preserving usual order would result in not very natural display, such as showing silkscreen texts on the bottom. * Introduced new hotkey (Alt+F12) and new menu option (View->Switch canvas) for switching canvas during runtime. * Some of classes (mostly derived from BOARD_ITEM) now includes ViewBBox & ViewGetLayers methods. * Removed tools/class_painter.h, as now it is extended and included in source code. Build changes: * GAL-based rendering option is turned on by a new compilation CMake option KICAD_GAL. * When compiling with CMake option KICAD_GAL=ON, GLEW and Cairo libraries are required. * GAL-related code is compiled into a static library (common/libgal). * Build with KICAD_GAL=OFF should not need any new libraries and should come out as a standard version of Kicad Currently most of items in pcbnew can be displayed using OpenGL (to be done are DIMENSIONS and MARKERS). More details about GAL can be found in: http://www.ohwr.org/attachments/1884/view-spec.pdf
2013-04-02 06:54:03 +00:00
* KIWAY Milestone A): Make major modules into DLL/DSOs. ! The initial testing of this commit should be done using a Debug build so that all the wxASSERT()s are enabled. Also, be sure and keep enabled the USE_KIWAY_DLLs option. The tree won't likely build without it. Turning it off is senseless anyways. If you want stable code, go back to a prior version, the one tagged with "stable". * Relocate all functionality out of the wxApp derivative into more finely targeted purposes: a) DLL/DSO specific b) PROJECT specific c) EXE or process specific d) configuration file specific data e) configuration file manipulations functions. All of this functionality was blended into an extremely large wxApp derivative and that was incompatible with the desire to support multiple concurrently loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects. An amazing amount of organization come from simply sorting each bit of functionality into the proper box. * Switch to wxConfigBase from wxConfig everywhere except instantiation. * Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD, PGM_SINGLE_TOP, * Remove "Return" prefix on many function names. * Remove obvious comments from CMakeLists.txt files, and from else() and endif()s. * Fix building boost for use in a DSO on linux. * Remove some of the assumptions in the CMakeLists.txt files that windows had to be the host platform when building windows binaries. * Reduce the number of wxStrings being constructed at program load time via static construction. * Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that these functions are useful even when the wxConfigBase comes from another source, as is the case in the KICAD_MANAGER_FRAME. * Move the setting of the KIPRJMOD environment variable into class PROJECT, so that it can be moved into a project variable soon, and out of FP_LIB_TABLE. * Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all its child wxFrames and wxDialogs now have a Kiway() member function which returns a KIWAY& that that window tree branch is in support of. This is like wxWindows DNA in that child windows get this member with proper value at time of construction. * Anticipate some of the needs for milestones B) and C) and make code adjustments now in an effort to reduce work in those milestones. * No testing has been done for python scripting, since milestone C) has that being largely reworked and re-thought-out.
2014-03-20 00:42:08 +00:00
# A shared library subsetted from common which restricts what can go into
# a single_top link image. By not linking to common, we control what does
# statically go into single_top link images. My current thinking is that only
# wxWidgets should be a shared link from single top, everything else should be
# statically bound into it. Otherwise you will have DSO loading probs. After it
* KIWAY Milestone A): Make major modules into DLL/DSOs. ! The initial testing of this commit should be done using a Debug build so that all the wxASSERT()s are enabled. Also, be sure and keep enabled the USE_KIWAY_DLLs option. The tree won't likely build without it. Turning it off is senseless anyways. If you want stable code, go back to a prior version, the one tagged with "stable". * Relocate all functionality out of the wxApp derivative into more finely targeted purposes: a) DLL/DSO specific b) PROJECT specific c) EXE or process specific d) configuration file specific data e) configuration file manipulations functions. All of this functionality was blended into an extremely large wxApp derivative and that was incompatible with the desire to support multiple concurrently loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects. An amazing amount of organization come from simply sorting each bit of functionality into the proper box. * Switch to wxConfigBase from wxConfig everywhere except instantiation. * Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD, PGM_SINGLE_TOP, * Remove "Return" prefix on many function names. * Remove obvious comments from CMakeLists.txt files, and from else() and endif()s. * Fix building boost for use in a DSO on linux. * Remove some of the assumptions in the CMakeLists.txt files that windows had to be the host platform when building windows binaries. * Reduce the number of wxStrings being constructed at program load time via static construction. * Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that these functions are useful even when the wxConfigBase comes from another source, as is the case in the KICAD_MANAGER_FRAME. * Move the setting of the KIPRJMOD environment variable into class PROJECT, so that it can be moved into a project variable soon, and out of FP_LIB_TABLE. * Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all its child wxFrames and wxDialogs now have a Kiway() member function which returns a KIWAY& that that window tree branch is in support of. This is like wxWindows DNA in that child windows get this member with proper value at time of construction. * Anticipate some of the needs for milestones B) and C) and make code adjustments now in an effort to reduce work in those milestones. * No testing has been done for python scripting, since milestone C) has that being largely reworked and re-thought-out.
2014-03-20 00:42:08 +00:00
# sets the LIB PATHS however, we want the *.kiface modules to use shared linking.
add_library( singletop STATIC EXCLUDE_FROM_ALL
confirm.cpp
eda_doc.cpp
kiway.cpp
kiway_holder.cpp
)
# A shared library used by multiple *.kiface files and one or two program
# launchers. Object files can migrate into here over time, but only if they are
# surely needed and certainly used from more than one place without recompilation.
# Functions and data all need to use the #include <import_export.h> and be declared
# as APIEXPORT
set( LIB_KICAD_SRCS
string_utils.cpp
* KIWAY Milestone A): Make major modules into DLL/DSOs. ! The initial testing of this commit should be done using a Debug build so that all the wxASSERT()s are enabled. Also, be sure and keep enabled the USE_KIWAY_DLLs option. The tree won't likely build without it. Turning it off is senseless anyways. If you want stable code, go back to a prior version, the one tagged with "stable". * Relocate all functionality out of the wxApp derivative into more finely targeted purposes: a) DLL/DSO specific b) PROJECT specific c) EXE or process specific d) configuration file specific data e) configuration file manipulations functions. All of this functionality was blended into an extremely large wxApp derivative and that was incompatible with the desire to support multiple concurrently loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects. An amazing amount of organization come from simply sorting each bit of functionality into the proper box. * Switch to wxConfigBase from wxConfig everywhere except instantiation. * Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD, PGM_SINGLE_TOP, * Remove "Return" prefix on many function names. * Remove obvious comments from CMakeLists.txt files, and from else() and endif()s. * Fix building boost for use in a DSO on linux. * Remove some of the assumptions in the CMakeLists.txt files that windows had to be the host platform when building windows binaries. * Reduce the number of wxStrings being constructed at program load time via static construction. * Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that these functions are useful even when the wxConfigBase comes from another source, as is the case in the KICAD_MANAGER_FRAME. * Move the setting of the KIPRJMOD environment variable into class PROJECT, so that it can be moved into a project variable soon, and out of FP_LIB_TABLE. * Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all its child wxFrames and wxDialogs now have a Kiway() member function which returns a KIWAY& that that window tree branch is in support of. This is like wxWindows DNA in that child windows get this member with proper value at time of construction. * Anticipate some of the needs for milestones B) and C) and make code adjustments now in an effort to reduce work in those milestones. * No testing has been done for python scripting, since milestone C) has that being largely reworked and re-thought-out.
2014-03-20 00:42:08 +00:00
)
if( future )
add_library( lib_kicad SHARED
)
target_link_libraries( lib_kicad
${wxWidgets_LIBRARIES}
)
set_target_properties( lib_kicad PROPERTIES
OUTPUT_NAME ki
)
install( TARGETS lib_kicad
DESTINATION ${KICAD_BIN}
COMPONENT binary
)
endif()
# The build version string defaults to the value in the KiCadVersion.cmake file.
# If being built inside a git repository, the git tag and commit hash are used to create
# a new version string instead. The user can supply an additional string to be appended
# to the end inside the KICAD_VERSION_EXTRA variable
set( KICAD_VERSION_EXTRA "" CACHE STRING
"User defined configuration string to append to KiCad version." )
# Generate version header file.
add_custom_target(
version_header ALL
COMMAND ${CMAKE_COMMAND}
-DKICAD_VERSION_EXTRA=${KICAD_VERSION_EXTRA}
-DOUTPUT_FILE=${CMAKE_BINARY_DIR}/kicad_build_version.h
-DTEXT_OUTPUT_FILE=${CMAKE_BINARY_DIR}/kicad_build_version.txt
-DSRC_PATH=${PROJECT_SOURCE_DIR}
-DCMAKE_MODULE_PATH=${CMAKE_MODULE_PATH}
-P ${CMAKE_MODULE_PATH}/BuildSteps/WriteVersionHeader.cmake
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
BYPRODUCTS ${CMAKE_BINARY_DIR}/kicad_build_version.h
DEPENDS ${CMAKE_MODULE_PATH}/BuildSteps/WriteVersionHeader.cmake
COMMENT "Generating version string header"
)
set( COMMON_ABOUT_DLG_SRCS
dialog_about/AboutDialog_main.cpp
dialog_about/dialog_about.cpp
dialog_about/dialog_about_base.cpp
)
set( COMMON_DLG_SRCS
2018-09-22 11:54:01 +00:00
dialogs/dialog_color_picker.cpp
dialogs/dialog_color_picker_base.cpp
dialogs/dialog_configure_paths.cpp
dialogs/dialog_configure_paths_base.cpp
dialogs/dialog_display_html_text_base.cpp
dialogs/dialog_edit_library_tables.cpp
dialogs/dialog_global_lib_table_config.cpp
dialogs/dialog_global_lib_table_config_base.cpp
dialogs/dialog_grid_settings.cpp
dialogs/dialog_grid_settings_base.cpp
dialogs/dialog_hotkey_list.cpp
2020-09-10 18:28:00 +00:00
dialogs/dialog_HTML_reporter_base.cpp
2017-12-27 16:06:27 +00:00
dialogs/dialog_image_editor.cpp
dialogs/dialog_image_editor_base.cpp
dialogs/dialog_locked_items_query.cpp
dialogs/dialog_locked_items_query_base.cpp
dialogs/dialog_migrate_settings.cpp
dialogs/dialog_migrate_settings_base.cpp
dialogs/dialog_page_settings_base.cpp
dialogs/dialog_paste_special.cpp
dialogs/dialog_paste_special_base.cpp
dialogs/dialog_text_entry_base.cpp
dialogs/dialog_page_settings.cpp
dialogs/dialog_print_generic.cpp
dialogs/dialog_print_generic_base.cpp
dialogs/dialog_text_entry.cpp
dialogs/dialog_unit_entry.cpp
dialogs/dialog_unit_entry_base.cpp
dialogs/eda_list_dialog.cpp
dialogs/eda_list_dialog_base.cpp
dialogs/eda_view_switcher.cpp
dialogs/eda_view_switcher_base.cpp
dialogs/html_message_box.cpp
dialogs/panel_color_settings_base.cpp
dialogs/panel_color_settings.cpp
dialogs/panel_common_settings.cpp
dialogs/panel_common_settings_base.cpp
dialogs/panel_hotkeys_editor.cpp
dialogs/panel_mouse_settings.cpp
dialogs/panel_mouse_settings_base.cpp
dialogs/panel_setup_netclasses.cpp
dialogs/panel_setup_netclasses_base.cpp
dialogs/panel_setup_severities.cpp
dialogs/panel_text_variables.cpp
dialogs/panel_text_variables_base.cpp
2020-07-30 11:20:55 +00:00
dialogs/wx_html_report_box.cpp
dialogs/wx_html_report_panel.cpp
2017-12-27 16:06:27 +00:00
dialogs/wx_html_report_panel_base.cpp
)
if( KICAD_USE_SENTRY )
list( APPEND COMMON_DLG_SRCS
dialogs/panel_data_collection.cpp
dialogs/panel_data_collection_base.cpp )
endif()
set( COMMON_WIDGET_SRCS
widgets/app_progress_dialog.cpp
widgets/bitmap_button.cpp
widgets/bitmap_toggle.cpp
widgets/button_row_panel.cpp
widgets/collapsible_pane.cpp
2017-12-27 16:06:27 +00:00
widgets/color_swatch.cpp
2022-01-03 01:20:25 +00:00
widgets/font_choice.cpp
2017-12-27 16:06:27 +00:00
widgets/footprint_choice.cpp
widgets/footprint_preview_widget.cpp
widgets/footprint_select_widget.cpp
2017-12-27 16:06:27 +00:00
widgets/gal_options_panel.cpp
widgets/grid_bitmap_toggle.cpp
widgets/grid_color_swatch_helpers.cpp
widgets/grid_combobox.cpp
widgets/grid_icon_text_helpers.cpp
widgets/grid_text_button_helpers.cpp
widgets/grid_text_helpers.cpp
widgets/indicator_icon.cpp
widgets/infobar.cpp
widgets/layer_box_selector.cpp
widgets/lib_tree.cpp
2017-12-27 16:06:27 +00:00
widgets/mathplot.cpp
widgets/msgpanel.cpp
widgets/number_badge.cpp
widgets/paged_dialog.cpp
widgets/progress_reporter_base.cpp
widgets/split_button.cpp
widgets/stepped_slider.cpp
widgets/text_ctrl_eval.cpp
widgets/ui_common.cpp
widgets/unit_binder.cpp
widgets/widget_save_restore.cpp
2017-12-27 16:06:27 +00:00
widgets/widget_hotkey_list.cpp
2021-03-02 04:10:03 +00:00
widgets/wx_aui_art_providers.cpp
widgets/wx_aui_utils.cpp
widgets/wx_busy_indicator.cpp
widgets/wx_ellipsized_static_text.cpp
widgets/wx_grid.cpp
widgets/wx_panel.cpp
widgets/wx_progress_reporters.cpp
widgets/wx_splitter_window.cpp
)
2021-02-22 23:47:17 +00:00
set( COMMON_DRAWING_SHEET_SRCS
drawing_sheet/ds_data_item.cpp
drawing_sheet/ds_data_model.cpp
drawing_sheet/ds_data_model_io.cpp
drawing_sheet/drawing_sheet_default_description.cpp
drawing_sheet/ds_draw_item.cpp
drawing_sheet/ds_proxy_undo_item.cpp
drawing_sheet/ds_proxy_view_item.cpp
2021-08-27 11:52:13 +00:00
drawing_sheet/drawing_sheet_parser.cpp
)
2013-05-24 08:59:40 +00:00
set( COMMON_PREVIEW_ITEMS_SRCS
preview_items/arc_assistant.cpp
preview_items/arc_geom_manager.cpp
preview_items/centreline_rect_item.cpp
preview_items/draw_context.cpp
2017-12-27 16:06:27 +00:00
preview_items/polygon_geom_manager.cpp
preview_items/polygon_item.cpp
preview_items/preview_utils.cpp
preview_items/ruler_item.cpp
preview_items/selection_area.cpp
2017-12-27 16:06:27 +00:00
preview_items/simple_overlay_item.cpp
preview_items/two_point_assistant.cpp
)
set( PLOTTERS_CONTROL_SRCS
plotters/plotter.cpp
plotters/DXF_plotter.cpp
plotters/GERBER_plotter.cpp
plotters/HPGL_plotter.cpp
plotters/PDF_plotter.cpp
plotters/PS_plotter.cpp
plotters/SVG_plotter.cpp
plotters/common_plot_functions.cpp
)
set( PLUGINS_ALTIUM_SRCS
plugins/altium/altium_parser.cpp
plugins/altium/altium_parser_utils.cpp
)
set( PLUGINS_CADSTAR_SRCS
plugins/cadstar/cadstar_archive_parser.cpp
)
set( PLUGINS_EAGLE_SRCS
plugins/eagle/eagle_parser.cpp
)
set( FONT_SRCS
font/font.cpp
2021-12-31 14:07:24 +00:00
font/glyph.cpp
font/stroke_font.cpp
2022-01-01 01:21:03 +00:00
font/outline_font.cpp
font/outline_decomposer.cpp
font/fontconfig.cpp
)
set( COMMON_SRCS
* KIWAY Milestone A): Make major modules into DLL/DSOs. ! The initial testing of this commit should be done using a Debug build so that all the wxASSERT()s are enabled. Also, be sure and keep enabled the USE_KIWAY_DLLs option. The tree won't likely build without it. Turning it off is senseless anyways. If you want stable code, go back to a prior version, the one tagged with "stable". * Relocate all functionality out of the wxApp derivative into more finely targeted purposes: a) DLL/DSO specific b) PROJECT specific c) EXE or process specific d) configuration file specific data e) configuration file manipulations functions. All of this functionality was blended into an extremely large wxApp derivative and that was incompatible with the desire to support multiple concurrently loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects. An amazing amount of organization come from simply sorting each bit of functionality into the proper box. * Switch to wxConfigBase from wxConfig everywhere except instantiation. * Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD, PGM_SINGLE_TOP, * Remove "Return" prefix on many function names. * Remove obvious comments from CMakeLists.txt files, and from else() and endif()s. * Fix building boost for use in a DSO on linux. * Remove some of the assumptions in the CMakeLists.txt files that windows had to be the host platform when building windows binaries. * Reduce the number of wxStrings being constructed at program load time via static construction. * Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that these functions are useful even when the wxConfigBase comes from another source, as is the case in the KICAD_MANAGER_FRAME. * Move the setting of the KIPRJMOD environment variable into class PROJECT, so that it can be moved into a project variable soon, and out of FP_LIB_TABLE. * Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all its child wxFrames and wxDialogs now have a Kiway() member function which returns a KIWAY& that that window tree branch is in support of. This is like wxWindows DNA in that child windows get this member with proper value at time of construction. * Anticipate some of the needs for milestones B) and C) and make code adjustments now in an effort to reduce work in those milestones. * No testing has been done for python scripting, since milestone C) has that being largely reworked and re-thought-out.
2014-03-20 00:42:08 +00:00
${LIB_KICAD_SRCS}
${COMMON_ABOUT_DLG_SRCS}
${COMMON_DLG_SRCS}
${COMMON_WIDGET_SRCS}
2021-02-22 23:47:17 +00:00
${COMMON_DRAWING_SHEET_SRCS}
${COMMON_PREVIEW_ITEMS_SRCS}
${PLOTTERS_CONTROL_SRCS}
${PLUGINS_ALTIUM_SRCS}
${PLUGINS_CADSTAR_SRCS}
${PLUGINS_EAGLE_SRCS}
${FONT_SRCS}
advanced_config.cpp
array_axis.cpp
array_options.cpp
asset_archive.cpp
base64.cpp
* KIWAY Milestone A): Make major modules into DLL/DSOs. ! The initial testing of this commit should be done using a Debug build so that all the wxASSERT()s are enabled. Also, be sure and keep enabled the USE_KIWAY_DLLs option. The tree won't likely build without it. Turning it off is senseless anyways. If you want stable code, go back to a prior version, the one tagged with "stable". * Relocate all functionality out of the wxApp derivative into more finely targeted purposes: a) DLL/DSO specific b) PROJECT specific c) EXE or process specific d) configuration file specific data e) configuration file manipulations functions. All of this functionality was blended into an extremely large wxApp derivative and that was incompatible with the desire to support multiple concurrently loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects. An amazing amount of organization come from simply sorting each bit of functionality into the proper box. * Switch to wxConfigBase from wxConfig everywhere except instantiation. * Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD, PGM_SINGLE_TOP, * Remove "Return" prefix on many function names. * Remove obvious comments from CMakeLists.txt files, and from else() and endif()s. * Fix building boost for use in a DSO on linux. * Remove some of the assumptions in the CMakeLists.txt files that windows had to be the host platform when building windows binaries. * Reduce the number of wxStrings being constructed at program load time via static construction. * Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that these functions are useful even when the wxConfigBase comes from another source, as is the case in the KICAD_MANAGER_FRAME. * Move the setting of the KIPRJMOD environment variable into class PROJECT, so that it can be moved into a project variable soon, and out of FP_LIB_TABLE. * Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all its child wxFrames and wxDialogs now have a Kiway() member function which returns a KIWAY& that that window tree branch is in support of. This is like wxWindows DNA in that child windows get this member with proper value at time of construction. * Anticipate some of the needs for milestones B) and C) and make code adjustments now in an effort to reduce work in those milestones. * No testing has been done for python scripting, since milestone C) has that being largely reworked and re-thought-out.
2014-03-20 00:42:08 +00:00
bin_mod.cpp
bitmap.cpp
2018-01-29 08:39:13 +00:00
bitmap_base.cpp
bitmap_store.cpp
board_printout.cpp
build_version.cpp
2020-06-19 03:26:10 +00:00
commit.cpp
common.cpp
* KIWAY Milestone A): Make major modules into DLL/DSOs. ! The initial testing of this commit should be done using a Debug build so that all the wxASSERT()s are enabled. Also, be sure and keep enabled the USE_KIWAY_DLLs option. The tree won't likely build without it. Turning it off is senseless anyways. If you want stable code, go back to a prior version, the one tagged with "stable". * Relocate all functionality out of the wxApp derivative into more finely targeted purposes: a) DLL/DSO specific b) PROJECT specific c) EXE or process specific d) configuration file specific data e) configuration file manipulations functions. All of this functionality was blended into an extremely large wxApp derivative and that was incompatible with the desire to support multiple concurrently loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects. An amazing amount of organization come from simply sorting each bit of functionality into the proper box. * Switch to wxConfigBase from wxConfig everywhere except instantiation. * Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD, PGM_SINGLE_TOP, * Remove "Return" prefix on many function names. * Remove obvious comments from CMakeLists.txt files, and from else() and endif()s. * Fix building boost for use in a DSO on linux. * Remove some of the assumptions in the CMakeLists.txt files that windows had to be the host platform when building windows binaries. * Reduce the number of wxStrings being constructed at program load time via static construction. * Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that these functions are useful even when the wxConfigBase comes from another source, as is the case in the KICAD_MANAGER_FRAME. * Move the setting of the KIPRJMOD environment variable into class PROJECT, so that it can be moved into a project variable soon, and out of FP_LIB_TABLE. * Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all its child wxFrames and wxDialogs now have a Kiway() member function which returns a KIWAY& that that window tree branch is in support of. This is like wxWindows DNA in that child windows get this member with proper value at time of construction. * Anticipate some of the needs for milestones B) and C) and make code adjustments now in an effort to reduce work in those milestones. * No testing has been done for python scripting, since milestone C) has that being largely reworked and re-thought-out.
2014-03-20 00:42:08 +00:00
config_params.cpp
2009-06-21 13:37:27 +00:00
confirm.cpp
dialog_shim.cpp
gr_text.cpp
dsnlexer.cpp
2018-01-29 15:39:40 +00:00
eda_base_frame.cpp
eda_dde.cpp
eda_doc.cpp
eda_draw_frame.cpp
eda_item.cpp
eda_pattern_match.cpp
eda_rect.cpp
2020-10-24 14:45:37 +00:00
eda_units.cpp
env_paths.cpp
env_vars.cpp
exceptions.cpp
executable_names.cpp
filename_resolver.cpp
filehistory.cpp
filter_reader.cpp
2017-12-27 16:06:27 +00:00
footprint_filter.cpp
footprint_info.cpp
gbr_metadata.cpp
gestfich.cpp
getrunningmicrosecs.cpp
gr_basic.cpp
2017-12-27 16:06:27 +00:00
grid_tricks.cpp
hotkey_store.cpp
hotkeys_basic.cpp
html_window.cpp
2021-09-14 22:45:14 +00:00
kiface_base.cpp
2020-10-24 04:00:49 +00:00
kiid.cpp
kiway.cpp
2014-04-21 06:28:17 +00:00
kiway_express.cpp
* KIWAY Milestone A): Make major modules into DLL/DSOs. ! The initial testing of this commit should be done using a Debug build so that all the wxASSERT()s are enabled. Also, be sure and keep enabled the USE_KIWAY_DLLs option. The tree won't likely build without it. Turning it off is senseless anyways. If you want stable code, go back to a prior version, the one tagged with "stable". * Relocate all functionality out of the wxApp derivative into more finely targeted purposes: a) DLL/DSO specific b) PROJECT specific c) EXE or process specific d) configuration file specific data e) configuration file manipulations functions. All of this functionality was blended into an extremely large wxApp derivative and that was incompatible with the desire to support multiple concurrently loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects. An amazing amount of organization come from simply sorting each bit of functionality into the proper box. * Switch to wxConfigBase from wxConfig everywhere except instantiation. * Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD, PGM_SINGLE_TOP, * Remove "Return" prefix on many function names. * Remove obvious comments from CMakeLists.txt files, and from else() and endif()s. * Fix building boost for use in a DSO on linux. * Remove some of the assumptions in the CMakeLists.txt files that windows had to be the host platform when building windows binaries. * Reduce the number of wxStrings being constructed at program load time via static construction. * Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that these functions are useful even when the wxConfigBase comes from another source, as is the case in the KICAD_MANAGER_FRAME. * Move the setting of the KIPRJMOD environment variable into class PROJECT, so that it can be moved into a project variable soon, and out of FP_LIB_TABLE. * Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all its child wxFrames and wxDialogs now have a Kiway() member function which returns a KIWAY& that that window tree branch is in support of. This is like wxWindows DNA in that child windows get this member with proper value at time of construction. * Anticipate some of the needs for milestones B) and C) and make code adjustments now in an effort to reduce work in those milestones. * No testing has been done for python scripting, since milestone C) has that being largely reworked and re-thought-out.
2014-03-20 00:42:08 +00:00
kiway_holder.cpp
2014-04-21 06:28:17 +00:00
kiway_player.cpp
languages_menu.cpp
launch_ext.cpp
layer_id.cpp
2017-12-27 16:06:27 +00:00
lib_id.cpp
lib_table_base.cpp
lib_tree_model.cpp
lib_tree_model_adapter.cpp
2020-10-24 01:38:50 +00:00
locale_io.cpp
2014-09-07 19:01:26 +00:00
lockfile.cpp
lset.cpp
2018-01-29 10:37:29 +00:00
marker_base.cpp
markup_parser.cpp
netclass.cpp
observable.cpp
origin_transforms.cpp
paths.cpp
printout.cpp
* KIWAY Milestone A): Make major modules into DLL/DSOs. ! The initial testing of this commit should be done using a Debug build so that all the wxASSERT()s are enabled. Also, be sure and keep enabled the USE_KIWAY_DLLs option. The tree won't likely build without it. Turning it off is senseless anyways. If you want stable code, go back to a prior version, the one tagged with "stable". * Relocate all functionality out of the wxApp derivative into more finely targeted purposes: a) DLL/DSO specific b) PROJECT specific c) EXE or process specific d) configuration file specific data e) configuration file manipulations functions. All of this functionality was blended into an extremely large wxApp derivative and that was incompatible with the desire to support multiple concurrently loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects. An amazing amount of organization come from simply sorting each bit of functionality into the proper box. * Switch to wxConfigBase from wxConfig everywhere except instantiation. * Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD, PGM_SINGLE_TOP, * Remove "Return" prefix on many function names. * Remove obvious comments from CMakeLists.txt files, and from else() and endif()s. * Fix building boost for use in a DSO on linux. * Remove some of the assumptions in the CMakeLists.txt files that windows had to be the host platform when building windows binaries. * Reduce the number of wxStrings being constructed at program load time via static construction. * Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that these functions are useful even when the wxConfigBase comes from another source, as is the case in the KICAD_MANAGER_FRAME. * Move the setting of the KIPRJMOD environment variable into class PROJECT, so that it can be moved into a project variable soon, and out of FP_LIB_TABLE. * Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all its child wxFrames and wxDialogs now have a Kiway() member function which returns a KIWAY& that that window tree branch is in support of. This is like wxWindows DNA in that child windows get this member with proper value at time of construction. * Anticipate some of the needs for milestones B) and C) and make code adjustments now in an effort to reduce work in those milestones. * No testing has been done for python scripting, since milestone C) has that being largely reworked and re-thought-out.
2014-03-20 00:42:08 +00:00
project.cpp
properties.cpp
property_mgr.cpp
ptree.cpp
rc_item.cpp
refdes_utils.cpp
2020-04-14 12:25:00 +00:00
render_settings.cpp
reporter.cpp
richio.cpp
scintilla_tricks.cpp
* KIWAY Milestone A): Make major modules into DLL/DSOs. ! The initial testing of this commit should be done using a Debug build so that all the wxASSERT()s are enabled. Also, be sure and keep enabled the USE_KIWAY_DLLs option. The tree won't likely build without it. Turning it off is senseless anyways. If you want stable code, go back to a prior version, the one tagged with "stable". * Relocate all functionality out of the wxApp derivative into more finely targeted purposes: a) DLL/DSO specific b) PROJECT specific c) EXE or process specific d) configuration file specific data e) configuration file manipulations functions. All of this functionality was blended into an extremely large wxApp derivative and that was incompatible with the desire to support multiple concurrently loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects. An amazing amount of organization come from simply sorting each bit of functionality into the proper box. * Switch to wxConfigBase from wxConfig everywhere except instantiation. * Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD, PGM_SINGLE_TOP, * Remove "Return" prefix on many function names. * Remove obvious comments from CMakeLists.txt files, and from else() and endif()s. * Fix building boost for use in a DSO on linux. * Remove some of the assumptions in the CMakeLists.txt files that windows had to be the host platform when building windows binaries. * Reduce the number of wxStrings being constructed at program load time via static construction. * Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that these functions are useful even when the wxConfigBase comes from another source, as is the case in the KICAD_MANAGER_FRAME. * Move the setting of the KIPRJMOD environment variable into class PROJECT, so that it can be moved into a project variable soon, and out of FP_LIB_TABLE. * Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all its child wxFrames and wxDialogs now have a Kiway() member function which returns a KIWAY& that that window tree branch is in support of. This is like wxWindows DNA in that child windows get this member with proper value at time of construction. * Anticipate some of the needs for milestones B) and C) and make code adjustments now in an effort to reduce work in those milestones. * No testing has been done for python scripting, since milestone C) has that being largely reworked and re-thought-out.
2014-03-20 00:42:08 +00:00
search_stack.cpp
2017-12-27 16:06:27 +00:00
searchhelpfilefullpath.cpp
status_popup.cpp
stroke_params.cpp
* KIWAY Milestone A): Make major modules into DLL/DSOs. ! The initial testing of this commit should be done using a Debug build so that all the wxASSERT()s are enabled. Also, be sure and keep enabled the USE_KIWAY_DLLs option. The tree won't likely build without it. Turning it off is senseless anyways. If you want stable code, go back to a prior version, the one tagged with "stable". * Relocate all functionality out of the wxApp derivative into more finely targeted purposes: a) DLL/DSO specific b) PROJECT specific c) EXE or process specific d) configuration file specific data e) configuration file manipulations functions. All of this functionality was blended into an extremely large wxApp derivative and that was incompatible with the desire to support multiple concurrently loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects. An amazing amount of organization come from simply sorting each bit of functionality into the proper box. * Switch to wxConfigBase from wxConfig everywhere except instantiation. * Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD, PGM_SINGLE_TOP, * Remove "Return" prefix on many function names. * Remove obvious comments from CMakeLists.txt files, and from else() and endif()s. * Fix building boost for use in a DSO on linux. * Remove some of the assumptions in the CMakeLists.txt files that windows had to be the host platform when building windows binaries. * Reduce the number of wxStrings being constructed at program load time via static construction. * Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that these functions are useful even when the wxConfigBase comes from another source, as is the case in the KICAD_MANAGER_FRAME. * Move the setting of the KIPRJMOD environment variable into class PROJECT, so that it can be moved into a project variable soon, and out of FP_LIB_TABLE. * Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all its child wxFrames and wxDialogs now have a Kiway() member function which returns a KIWAY& that that window tree branch is in support of. This is like wxWindows DNA in that child windows get this member with proper value at time of construction. * Anticipate some of the needs for milestones B) and C) and make code adjustments now in an effort to reduce work in those milestones. * No testing has been done for python scripting, since milestone C) has that being largely reworked and re-thought-out.
2014-03-20 00:42:08 +00:00
systemdirsappend.cpp
template_fieldnames.cpp
textentry_tricks.cpp
title_block.cpp
trace_helpers.cpp
2018-01-31 08:23:20 +00:00
undo_redo_container.cpp
utf8.cpp
validators.cpp
wildcards_and_files_ext.cpp
2021-02-22 23:47:17 +00:00
drawing_sheet/ds_painter.cpp
2017-12-27 16:06:27 +00:00
wxdataviewctrl_helpers.cpp
wx_stl_compat.cpp
2020-10-25 18:53:05 +00:00
wx_filename.cpp
2010-08-07 15:25:18 +00:00
xnode.cpp
)
if( TRUE OR NOT USE_KIWAY_DLLS )
* KIWAY Milestone A): Make major modules into DLL/DSOs. ! The initial testing of this commit should be done using a Debug build so that all the wxASSERT()s are enabled. Also, be sure and keep enabled the USE_KIWAY_DLLs option. The tree won't likely build without it. Turning it off is senseless anyways. If you want stable code, go back to a prior version, the one tagged with "stable". * Relocate all functionality out of the wxApp derivative into more finely targeted purposes: a) DLL/DSO specific b) PROJECT specific c) EXE or process specific d) configuration file specific data e) configuration file manipulations functions. All of this functionality was blended into an extremely large wxApp derivative and that was incompatible with the desire to support multiple concurrently loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects. An amazing amount of organization come from simply sorting each bit of functionality into the proper box. * Switch to wxConfigBase from wxConfig everywhere except instantiation. * Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD, PGM_SINGLE_TOP, * Remove "Return" prefix on many function names. * Remove obvious comments from CMakeLists.txt files, and from else() and endif()s. * Fix building boost for use in a DSO on linux. * Remove some of the assumptions in the CMakeLists.txt files that windows had to be the host platform when building windows binaries. * Reduce the number of wxStrings being constructed at program load time via static construction. * Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that these functions are useful even when the wxConfigBase comes from another source, as is the case in the KICAD_MANAGER_FRAME. * Move the setting of the KIPRJMOD environment variable into class PROJECT, so that it can be moved into a project variable soon, and out of FP_LIB_TABLE. * Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all its child wxFrames and wxDialogs now have a Kiway() member function which returns a KIWAY& that that window tree branch is in support of. This is like wxWindows DNA in that child windows get this member with proper value at time of construction. * Anticipate some of the needs for milestones B) and C) and make code adjustments now in an effort to reduce work in those milestones. * No testing has been done for python scripting, since milestone C) has that being largely reworked and re-thought-out.
2014-03-20 00:42:08 +00:00
#if( NOT USE_KIWAY_DLLS )
# We DO NOT want pgm_base.cpp linked into the KIFACE, only into the KIWAY.
# Check the map files to verify eda_pgm.o not being linked in.
list( APPEND COMMON_SRCS pgm_base.cpp )
endif()
if( NOT HAVE_STRTOKR )
list( APPEND COMMON_SRCS strtok_r.c )
endif()
list( APPEND COMMON_SRCS
kicad_curl/kicad_curl.cpp
kicad_curl/kicad_curl_easy.cpp
)
set( COMMON_SRCS
2013-09-23 15:02:25 +00:00
${COMMON_SRCS}
origin_viewitem.cpp
2013-09-23 15:02:25 +00:00
view/view.cpp
view/view_item.cpp
view/view_group.cpp
2017-12-27 16:06:27 +00:00
tool/action_manager.cpp
tool/action_menu.cpp
tool/action_toolbar.cpp
2017-12-27 16:06:27 +00:00
tool/actions.cpp
2019-06-09 21:57:23 +00:00
tool/common_control.cpp
2017-12-27 16:06:27 +00:00
tool/common_tools.cpp
tool/conditional_menu.cpp
2019-05-08 18:56:03 +00:00
tool/edit_constraints.cpp
tool/edit_points.cpp
tool/editor_conditions.cpp
tool/grid_helper.cpp
2017-12-27 16:06:27 +00:00
tool/grid_menu.cpp
tool/picker_tool.cpp
tool/selection.cpp
tool/selection_tool.cpp
2017-12-27 16:06:27 +00:00
tool/selection_conditions.cpp
tool/tool_action.cpp
2013-09-11 12:42:12 +00:00
tool/tool_base.cpp
tool/tool_dispatcher.cpp
tool/tool_event.cpp
tool/tools_holder.cpp
2013-09-11 12:42:12 +00:00
tool/tool_interactive.cpp
2017-12-27 16:06:27 +00:00
tool/tool_manager.cpp
tool/tool_menu.cpp
2017-12-27 16:06:27 +00:00
tool/zoom_menu.cpp
tool/zoom_tool.cpp
2013-09-12 15:42:28 +00:00
settings/app_settings.cpp
settings/color_settings.cpp
settings/common_settings.cpp
settings/json_settings.cpp
settings/nested_settings.cpp
settings/parameters.cpp
settings/settings_manager.cpp
project/board_project_settings.cpp
project/net_settings.cpp
project/project_archiver.cpp
project/project_file.cpp
project/project_local_settings.cpp
)
add_library( common STATIC
${COMMON_SRCS}
)
add_dependencies( common version_header )
add_dependencies( common compoundfilereader ) # used by altium_parser.cpp
target_link_libraries( common
libcontext
kimath
kiplatform
gal
2021-03-19 23:06:29 +00:00
scripting
2021-03-15 21:56:13 +00:00
pybind11::embed
compoundfilereader
${Boost_LIBRARIES}
${CURL_LIBRARIES}
${wxWidgets_LIBRARIES}
${EXTRA_LIBS}
2022-01-01 01:21:03 +00:00
# outline font support
${FREETYPE_LIBRARIES}
${HarfBuzz_LIBRARIES}
${Fontconfig_LIBRARIES}
)
* KIWAY Milestone A): Make major modules into DLL/DSOs. ! The initial testing of this commit should be done using a Debug build so that all the wxASSERT()s are enabled. Also, be sure and keep enabled the USE_KIWAY_DLLs option. The tree won't likely build without it. Turning it off is senseless anyways. If you want stable code, go back to a prior version, the one tagged with "stable". * Relocate all functionality out of the wxApp derivative into more finely targeted purposes: a) DLL/DSO specific b) PROJECT specific c) EXE or process specific d) configuration file specific data e) configuration file manipulations functions. All of this functionality was blended into an extremely large wxApp derivative and that was incompatible with the desire to support multiple concurrently loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects. An amazing amount of organization come from simply sorting each bit of functionality into the proper box. * Switch to wxConfigBase from wxConfig everywhere except instantiation. * Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD, PGM_SINGLE_TOP, * Remove "Return" prefix on many function names. * Remove obvious comments from CMakeLists.txt files, and from else() and endif()s. * Fix building boost for use in a DSO on linux. * Remove some of the assumptions in the CMakeLists.txt files that windows had to be the host platform when building windows binaries. * Reduce the number of wxStrings being constructed at program load time via static construction. * Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that these functions are useful even when the wxConfigBase comes from another source, as is the case in the KICAD_MANAGER_FRAME. * Move the setting of the KIPRJMOD environment variable into class PROJECT, so that it can be moved into a project variable soon, and out of FP_LIB_TABLE. * Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all its child wxFrames and wxDialogs now have a Kiway() member function which returns a KIWAY& that that window tree branch is in support of. This is like wxWindows DNA in that child windows get this member with proper value at time of construction. * Anticipate some of the needs for milestones B) and C) and make code adjustments now in an effort to reduce work in those milestones. * No testing has been done for python scripting, since milestone C) has that being largely reworked and re-thought-out.
2014-03-20 00:42:08 +00:00
if( KICAD_USE_SENTRY )
target_link_libraries( common
sentry )
endif()
target_include_directories( common
PUBLIC
.
${CMAKE_BINARY_DIR}
)
# text markup support
add_dependencies( common pegtl )
target_include_directories( common PUBLIC
$<TARGET_PROPERTY:pegtl,INTERFACE_INCLUDE_DIRECTORIES>
)
set( PCB_COMMON_SRCS
base_screen.cpp
2017-12-27 16:06:27 +00:00
eda_text.cpp
eda_shape.cpp
2017-12-27 16:06:27 +00:00
fp_lib_table.cpp
hash_eda.cpp
2018-01-29 10:37:29 +00:00
page_info.cpp
${CMAKE_SOURCE_DIR}/pcbnew/pcb_base_frame.cpp
${CMAKE_SOURCE_DIR}/pcbnew/pcb_expr_evaluator.cpp
${CMAKE_SOURCE_DIR}/pcbnew/board_commit.cpp
${CMAKE_SOURCE_DIR}/pcbnew/board_connected_item.cpp
${CMAKE_SOURCE_DIR}/pcbnew/board_design_settings.cpp
${CMAKE_SOURCE_DIR}/pcbnew/teardrop/teardrop_parameters.cpp #needed by board_design_settings.cpp
${CMAKE_SOURCE_DIR}/pcbnew/board.cpp
2020-11-14 18:11:28 +00:00
${CMAKE_SOURCE_DIR}/pcbnew/board_item.cpp
2021-06-11 16:59:28 +00:00
${CMAKE_SOURCE_DIR}/pcbnew/pcb_dimension.cpp
${CMAKE_SOURCE_DIR}/pcbnew/pcb_shape.cpp
${CMAKE_SOURCE_DIR}/pcbnew/fp_shape.cpp
${CMAKE_SOURCE_DIR}/pcbnew/pcb_group.cpp
2020-11-14 18:11:28 +00:00
${CMAKE_SOURCE_DIR}/pcbnew/pcb_marker.cpp
${CMAKE_SOURCE_DIR}/pcbnew/footprint.cpp
${CMAKE_SOURCE_DIR}/pcbnew/netinfo_item.cpp
${CMAKE_SOURCE_DIR}/pcbnew/netinfo_list.cpp
${CMAKE_SOURCE_DIR}/pcbnew/pad.cpp
${CMAKE_SOURCE_DIR}/pcbnew/pcb_target.cpp
${CMAKE_SOURCE_DIR}/pcbnew/pcb_text.cpp
2022-01-30 10:52:52 +00:00
${CMAKE_SOURCE_DIR}/pcbnew/pcb_textbox.cpp
${CMAKE_SOURCE_DIR}/pcbnew/board_stackup_manager/board_stackup.cpp
${CMAKE_SOURCE_DIR}/pcbnew/fp_text.cpp
2022-01-30 10:52:52 +00:00
${CMAKE_SOURCE_DIR}/pcbnew/fp_textbox.cpp
2021-06-11 21:07:02 +00:00
${CMAKE_SOURCE_DIR}/pcbnew/pcb_track.cpp
${CMAKE_SOURCE_DIR}/pcbnew/zone.cpp
${CMAKE_SOURCE_DIR}/pcbnew/collectors.cpp
${CMAKE_SOURCE_DIR}/pcbnew/connectivity/connectivity_algo.cpp
${CMAKE_SOURCE_DIR}/pcbnew/connectivity/connectivity_items.cpp
${CMAKE_SOURCE_DIR}/pcbnew/connectivity/connectivity_data.cpp
${CMAKE_SOURCE_DIR}/pcbnew/connectivity/from_to_cache.cpp
${CMAKE_SOURCE_DIR}/pcbnew/convert_shape_list_to_polygon.cpp
${CMAKE_SOURCE_DIR}/pcbnew/drc/drc_engine.cpp
${CMAKE_SOURCE_DIR}/pcbnew/drc/drc_item.cpp
${CMAKE_SOURCE_DIR}/pcbnew/drc/drc_rule.cpp
2020-09-12 23:05:32 +00:00
${CMAKE_SOURCE_DIR}/pcbnew/drc/drc_rule_condition.cpp
${CMAKE_SOURCE_DIR}/pcbnew/drc/drc_rule_parser.cpp
2020-12-29 20:26:14 +00:00
${CMAKE_SOURCE_DIR}/pcbnew/drc/drc_test_provider.cpp
${CMAKE_SOURCE_DIR}/pcbnew/plugins/eagle/eagle_plugin.cpp
${CMAKE_SOURCE_DIR}/pcbnew/footprint_editor_settings.cpp
${CMAKE_SOURCE_DIR}/pcbnew/plugins/geda/gpcb_plugin.cpp
${CMAKE_SOURCE_DIR}/pcbnew/io_mgr.cpp
${CMAKE_SOURCE_DIR}/pcbnew/kicad_clipboard.cpp
${CMAKE_SOURCE_DIR}/pcbnew/netlist_reader/kicad_netlist_reader.cpp
${CMAKE_SOURCE_DIR}/pcbnew/plugins/kicad/pcb_plugin.cpp
${CMAKE_SOURCE_DIR}/pcbnew/netlist_reader/legacy_netlist_reader.cpp
${CMAKE_SOURCE_DIR}/pcbnew/plugins/legacy/legacy_plugin.cpp
${CMAKE_SOURCE_DIR}/pcbnew/netlist_reader/netlist_reader.cpp
${CMAKE_SOURCE_DIR}/pcbnew/pad_custom_shape_functions.cpp
${CMAKE_SOURCE_DIR}/pcbnew/pcb_draw_panel_gal.cpp
${CMAKE_SOURCE_DIR}/pcbnew/netlist_reader/pcb_netlist.cpp
${CMAKE_SOURCE_DIR}/pcbnew/pcb_origin_transforms.cpp
${CMAKE_SOURCE_DIR}/pcbnew/pcb_painter.cpp
${CMAKE_SOURCE_DIR}/pcbnew/plugins/kicad/pcb_parser.cpp
${CMAKE_SOURCE_DIR}/pcbnew/pcb_plot_params.cpp
${CMAKE_SOURCE_DIR}/pcbnew/pcb_screen.cpp
${CMAKE_SOURCE_DIR}/pcbnew/pcb_view.cpp
${CMAKE_SOURCE_DIR}/pcbnew/pcbnew_settings.cpp
${CMAKE_SOURCE_DIR}/pcbnew/plugin.cpp
${CMAKE_SOURCE_DIR}/pcbnew/ratsnest/ratsnest_data.cpp
2021-02-22 23:47:17 +00:00
${CMAKE_SOURCE_DIR}/pcbnew/ratsnest/ratsnest_view_item.cpp
${CMAKE_SOURCE_DIR}/pcbnew/sel_layer.cpp
${CMAKE_SOURCE_DIR}/pcbnew/zone_settings.cpp
${CMAKE_SOURCE_DIR}/pcbnew/tools/pcb_grid_helper.cpp
${CMAKE_SOURCE_DIR}/pcbnew/tools/pcb_actions.cpp
${CMAKE_SOURCE_DIR}/pcbnew/tools/pcb_editor_conditions.cpp
${CMAKE_SOURCE_DIR}/pcbnew/tools/pcb_viewer_tools.cpp
widgets/net_selector.cpp
)
# add -DPCBNEW to compilation of these PCBNEW sources
set_source_files_properties( ${PCB_COMMON_SRCS} PROPERTIES
COMPILE_DEFINITIONS "PCBNEW"
)
2011-12-07 05:28:49 +00:00
add_library( pcbcommon STATIC ${PCB_COMMON_SRCS} )
target_link_libraries( pcbcommon PUBLIC
common
delaunator
kimath
kiplatform
)
if( KICAD_USE_3DCONNEXION )
message( STATUS "Including 3Dconnexion SpaceMouse navigation support in pcbcommon" )
add_subdirectory( ../pcbnew/navlib ./navlib)
target_link_libraries( pcbcommon PUBLIC pcbnew_navlib)
endif()
add_dependencies( pcbcommon delaunator )
# The lemon grammar for the numeric evaluator
generate_lemon_grammar(
common
libeval
libeval/numeric_evaluator.cpp
libeval/grammar.lemon
)
# The lemon grammar for the expression compiler
generate_lemon_grammar(
common
libeval_compiler
libeval_compiler/libeval_compiler.cpp
libeval_compiler/grammar.lemon
)
# auto-generate stroke_params_lexer.h and stroke_params_keywords.cpp
# Called twice one for common and one for gal, to ensure the files are created
# on all devel tools ( Linux and msys2 )
# works on Linux:
make_lexer(
common
stroke_params.keywords
stroke_params_lexer.h
stroke_params_keywords.cpp
STROKEPARAMS_T
)
# auto-generate netlist_lexer.h and netlist_keywords.cpp
2010-12-27 16:49:39 +00:00
make_lexer(
common
netlist.keywords
netlist_lexer.h
netlist_keywords.cpp
2010-12-27 16:49:39 +00:00
NL_T
)
# auto-generate pcb_plot_params_lexer.h and pcb_plot_params_keywords.cpp
make_lexer(
pcbcommon
pcb_plot_params.keywords
pcb_plot_params_lexer.h
pcb_plot_params_keywords.cpp
PCBPLOTPARAMS_T
)
# auto-generate drc_rules_lexer.h and drc_rules_keywords.cpp
make_lexer(
common
drc_rules.keywords
drc_rules_lexer.h
drc_rules_keywords.cpp
DRCRULE_T
)
# auto-generate pcbnew_sexpr.h and pcbnew_sexpr.cpp
make_lexer(
pcbcommon
pcb.keywords
pcb_lexer.h
pcb_keywords.cpp
PCB_KEYS_T
)
# auto-generate s-expression library table code.
make_lexer(
common
lib_table.keywords
lib_table_lexer.h
lib_table_keywords.cpp
LIB_TABLE_T
)
# auto-generate s-expression template fieldnames lexer and keywords.
make_lexer(
common
template_fieldnames.keywords
template_fieldnames_lexer.h
template_fieldnames_keywords.cpp
TFIELD_T
)
# auto-generate page layout reader s-expression page_layout_reader_lexer.h
# and title_block_reader_keywords.cpp.
make_lexer(
common
2021-08-27 11:52:13 +00:00
drawing_sheet/drawing_sheet.keywords
drawing_sheet/drawing_sheet_lexer.h
drawing_sheet/drawing_sheet_keywords.cpp
DRAWINGSHEET_T
)
2013-09-21 07:30:23 +00:00
# This one gets made only when testing.
# to build it, first enable #define STAND_ALONE at top of dsnlexer.cpp
add_executable( dsntest EXCLUDE_FROM_ALL dsnlexer.cpp )
target_link_libraries( dsntest common ${wxWidgets_LIBRARIES} rt )