kicad/common/view/wx_view_controls.cpp

776 lines
25 KiB
C++
Raw Normal View History

Introduction of Graphics Abstraction Layer based rendering for pcbnew. New classes: - VIEW - represents view that is seen by user, takes care of layer ordering & visibility and how it is displayed (which location, how much zoomed, etc.) - VIEW_ITEM - Base class for every item that can be displayed on VIEW (the biggest change is that now it may be necessary to override ViewBBox & ViewGetLayers method for derived classes). - EDA_DRAW_PANEL_GAL - Inherits after EDA_DRAW_PANEL, displays VIEW output, right now it is not editable (in opposite to usual EDA_DRAW_PANEL). - GAL/OPENGL_GAL/CAIRO_GAL - Base Graphics Abstraction Layer class + two different flavours (Cairo is not fully supported yet), that offers methods to draw primitives using different libraries. - WX_VIEW_CONTROLS - Controller for VIEW, handles user events, allows zooming, panning, etc. - PAINTER/PCB_PAINTER - Classes that uses GAL interface to draw items (as you may have already guessed - PCB_PAINTER is a class for drawing PCB specific object, PAINTER is an abstract class). Its methods are invoked by VIEW, when an item has to be drawn. To display a new type of item - you need to implement draw(ITEM_TYPE*) method that draws it using GAL methods. - STROKE_FONT - Implements stroke font drawing using GAL methods. Most important changes to Kicad original code: * EDA_ITEM now inherits from VIEW_ITEM, which is a base class for all drawable objects. * EDA_DRAW_FRAME contains both usual EDA_DRAW_PANEL and new EDA_DRAW_PANEL_GAL, that can be switched anytime. * There are some new layers for displaying multilayer pads, vias & pads holes (these are not shown yet on the right sidebar in pcbnew) * Display order of layers is different than in previous versions (if you are curious - you may check m_galLayerOrder@pcbnew/basepcbframe.cpp). Preserving usual order would result in not very natural display, such as showing silkscreen texts on the bottom. * Introduced new hotkey (Alt+F12) and new menu option (View->Switch canvas) for switching canvas during runtime. * Some of classes (mostly derived from BOARD_ITEM) now includes ViewBBox & ViewGetLayers methods. * Removed tools/class_painter.h, as now it is extended and included in source code. Build changes: * GAL-based rendering option is turned on by a new compilation CMake option KICAD_GAL. * When compiling with CMake option KICAD_GAL=ON, GLEW and Cairo libraries are required. * GAL-related code is compiled into a static library (common/libgal). * Build with KICAD_GAL=OFF should not need any new libraries and should come out as a standard version of Kicad Currently most of items in pcbnew can be displayed using OpenGL (to be done are DIMENSIONS and MARKERS). More details about GAL can be found in: http://www.ohwr.org/attachments/1884/view-spec.pdf
2013-04-02 06:54:03 +00:00
/*
* This program source code file is part of KiCad, a free EDA CAD application.
*
* Copyright (C) 2012 Torsten Hueter, torstenhtr <at> gmx.de
2015-05-18 11:48:10 +00:00
* Copyright (C) 2013-2015 CERN
* Copyright (C) 2012-2016 KiCad Developers, see AUTHORS.txt for contributors.
*
Introduction of Graphics Abstraction Layer based rendering for pcbnew. New classes: - VIEW - represents view that is seen by user, takes care of layer ordering & visibility and how it is displayed (which location, how much zoomed, etc.) - VIEW_ITEM - Base class for every item that can be displayed on VIEW (the biggest change is that now it may be necessary to override ViewBBox & ViewGetLayers method for derived classes). - EDA_DRAW_PANEL_GAL - Inherits after EDA_DRAW_PANEL, displays VIEW output, right now it is not editable (in opposite to usual EDA_DRAW_PANEL). - GAL/OPENGL_GAL/CAIRO_GAL - Base Graphics Abstraction Layer class + two different flavours (Cairo is not fully supported yet), that offers methods to draw primitives using different libraries. - WX_VIEW_CONTROLS - Controller for VIEW, handles user events, allows zooming, panning, etc. - PAINTER/PCB_PAINTER - Classes that uses GAL interface to draw items (as you may have already guessed - PCB_PAINTER is a class for drawing PCB specific object, PAINTER is an abstract class). Its methods are invoked by VIEW, when an item has to be drawn. To display a new type of item - you need to implement draw(ITEM_TYPE*) method that draws it using GAL methods. - STROKE_FONT - Implements stroke font drawing using GAL methods. Most important changes to Kicad original code: * EDA_ITEM now inherits from VIEW_ITEM, which is a base class for all drawable objects. * EDA_DRAW_FRAME contains both usual EDA_DRAW_PANEL and new EDA_DRAW_PANEL_GAL, that can be switched anytime. * There are some new layers for displaying multilayer pads, vias & pads holes (these are not shown yet on the right sidebar in pcbnew) * Display order of layers is different than in previous versions (if you are curious - you may check m_galLayerOrder@pcbnew/basepcbframe.cpp). Preserving usual order would result in not very natural display, such as showing silkscreen texts on the bottom. * Introduced new hotkey (Alt+F12) and new menu option (View->Switch canvas) for switching canvas during runtime. * Some of classes (mostly derived from BOARD_ITEM) now includes ViewBBox & ViewGetLayers methods. * Removed tools/class_painter.h, as now it is extended and included in source code. Build changes: * GAL-based rendering option is turned on by a new compilation CMake option KICAD_GAL. * When compiling with CMake option KICAD_GAL=ON, GLEW and Cairo libraries are required. * GAL-related code is compiled into a static library (common/libgal). * Build with KICAD_GAL=OFF should not need any new libraries and should come out as a standard version of Kicad Currently most of items in pcbnew can be displayed using OpenGL (to be done are DIMENSIONS and MARKERS). More details about GAL can be found in: http://www.ohwr.org/attachments/1884/view-spec.pdf
2013-04-02 06:54:03 +00:00
* @author Tomasz Wlostowski <tomasz.wlostowski@cern.ch>
2015-05-18 11:48:10 +00:00
* @author Maciej Suminski <maciej.suminski@cern.ch>
Introduction of Graphics Abstraction Layer based rendering for pcbnew. New classes: - VIEW - represents view that is seen by user, takes care of layer ordering & visibility and how it is displayed (which location, how much zoomed, etc.) - VIEW_ITEM - Base class for every item that can be displayed on VIEW (the biggest change is that now it may be necessary to override ViewBBox & ViewGetLayers method for derived classes). - EDA_DRAW_PANEL_GAL - Inherits after EDA_DRAW_PANEL, displays VIEW output, right now it is not editable (in opposite to usual EDA_DRAW_PANEL). - GAL/OPENGL_GAL/CAIRO_GAL - Base Graphics Abstraction Layer class + two different flavours (Cairo is not fully supported yet), that offers methods to draw primitives using different libraries. - WX_VIEW_CONTROLS - Controller for VIEW, handles user events, allows zooming, panning, etc. - PAINTER/PCB_PAINTER - Classes that uses GAL interface to draw items (as you may have already guessed - PCB_PAINTER is a class for drawing PCB specific object, PAINTER is an abstract class). Its methods are invoked by VIEW, when an item has to be drawn. To display a new type of item - you need to implement draw(ITEM_TYPE*) method that draws it using GAL methods. - STROKE_FONT - Implements stroke font drawing using GAL methods. Most important changes to Kicad original code: * EDA_ITEM now inherits from VIEW_ITEM, which is a base class for all drawable objects. * EDA_DRAW_FRAME contains both usual EDA_DRAW_PANEL and new EDA_DRAW_PANEL_GAL, that can be switched anytime. * There are some new layers for displaying multilayer pads, vias & pads holes (these are not shown yet on the right sidebar in pcbnew) * Display order of layers is different than in previous versions (if you are curious - you may check m_galLayerOrder@pcbnew/basepcbframe.cpp). Preserving usual order would result in not very natural display, such as showing silkscreen texts on the bottom. * Introduced new hotkey (Alt+F12) and new menu option (View->Switch canvas) for switching canvas during runtime. * Some of classes (mostly derived from BOARD_ITEM) now includes ViewBBox & ViewGetLayers methods. * Removed tools/class_painter.h, as now it is extended and included in source code. Build changes: * GAL-based rendering option is turned on by a new compilation CMake option KICAD_GAL. * When compiling with CMake option KICAD_GAL=ON, GLEW and Cairo libraries are required. * GAL-related code is compiled into a static library (common/libgal). * Build with KICAD_GAL=OFF should not need any new libraries and should come out as a standard version of Kicad Currently most of items in pcbnew can be displayed using OpenGL (to be done are DIMENSIONS and MARKERS). More details about GAL can be found in: http://www.ohwr.org/attachments/1884/view-spec.pdf
2013-04-02 06:54:03 +00:00
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, you may find one here:
* http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
* or you may search the http://www.gnu.org website for the version 2 license,
* or you may write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
*/
#include <pgm_base.h>
Introduction of Graphics Abstraction Layer based rendering for pcbnew. New classes: - VIEW - represents view that is seen by user, takes care of layer ordering & visibility and how it is displayed (which location, how much zoomed, etc.) - VIEW_ITEM - Base class for every item that can be displayed on VIEW (the biggest change is that now it may be necessary to override ViewBBox & ViewGetLayers method for derived classes). - EDA_DRAW_PANEL_GAL - Inherits after EDA_DRAW_PANEL, displays VIEW output, right now it is not editable (in opposite to usual EDA_DRAW_PANEL). - GAL/OPENGL_GAL/CAIRO_GAL - Base Graphics Abstraction Layer class + two different flavours (Cairo is not fully supported yet), that offers methods to draw primitives using different libraries. - WX_VIEW_CONTROLS - Controller for VIEW, handles user events, allows zooming, panning, etc. - PAINTER/PCB_PAINTER - Classes that uses GAL interface to draw items (as you may have already guessed - PCB_PAINTER is a class for drawing PCB specific object, PAINTER is an abstract class). Its methods are invoked by VIEW, when an item has to be drawn. To display a new type of item - you need to implement draw(ITEM_TYPE*) method that draws it using GAL methods. - STROKE_FONT - Implements stroke font drawing using GAL methods. Most important changes to Kicad original code: * EDA_ITEM now inherits from VIEW_ITEM, which is a base class for all drawable objects. * EDA_DRAW_FRAME contains both usual EDA_DRAW_PANEL and new EDA_DRAW_PANEL_GAL, that can be switched anytime. * There are some new layers for displaying multilayer pads, vias & pads holes (these are not shown yet on the right sidebar in pcbnew) * Display order of layers is different than in previous versions (if you are curious - you may check m_galLayerOrder@pcbnew/basepcbframe.cpp). Preserving usual order would result in not very natural display, such as showing silkscreen texts on the bottom. * Introduced new hotkey (Alt+F12) and new menu option (View->Switch canvas) for switching canvas during runtime. * Some of classes (mostly derived from BOARD_ITEM) now includes ViewBBox & ViewGetLayers methods. * Removed tools/class_painter.h, as now it is extended and included in source code. Build changes: * GAL-based rendering option is turned on by a new compilation CMake option KICAD_GAL. * When compiling with CMake option KICAD_GAL=ON, GLEW and Cairo libraries are required. * GAL-related code is compiled into a static library (common/libgal). * Build with KICAD_GAL=OFF should not need any new libraries and should come out as a standard version of Kicad Currently most of items in pcbnew can be displayed using OpenGL (to be done are DIMENSIONS and MARKERS). More details about GAL can be found in: http://www.ohwr.org/attachments/1884/view-spec.pdf
2013-04-02 06:54:03 +00:00
#include <view/view.h>
#include <view/wx_view_controls.h>
#include <view/zoom_controller.h>
2013-08-28 14:25:42 +00:00
#include <gal/graphics_abstraction_layer.h>
#include <tool/tool_dispatcher.h>
#include <trace_helpers.h>
#include <settings/common_settings.h>
#include <math/util.h> // for KiROUND
#include <widgets/ui_common.h>
Introduction of Graphics Abstraction Layer based rendering for pcbnew. New classes: - VIEW - represents view that is seen by user, takes care of layer ordering & visibility and how it is displayed (which location, how much zoomed, etc.) - VIEW_ITEM - Base class for every item that can be displayed on VIEW (the biggest change is that now it may be necessary to override ViewBBox & ViewGetLayers method for derived classes). - EDA_DRAW_PANEL_GAL - Inherits after EDA_DRAW_PANEL, displays VIEW output, right now it is not editable (in opposite to usual EDA_DRAW_PANEL). - GAL/OPENGL_GAL/CAIRO_GAL - Base Graphics Abstraction Layer class + two different flavours (Cairo is not fully supported yet), that offers methods to draw primitives using different libraries. - WX_VIEW_CONTROLS - Controller for VIEW, handles user events, allows zooming, panning, etc. - PAINTER/PCB_PAINTER - Classes that uses GAL interface to draw items (as you may have already guessed - PCB_PAINTER is a class for drawing PCB specific object, PAINTER is an abstract class). Its methods are invoked by VIEW, when an item has to be drawn. To display a new type of item - you need to implement draw(ITEM_TYPE*) method that draws it using GAL methods. - STROKE_FONT - Implements stroke font drawing using GAL methods. Most important changes to Kicad original code: * EDA_ITEM now inherits from VIEW_ITEM, which is a base class for all drawable objects. * EDA_DRAW_FRAME contains both usual EDA_DRAW_PANEL and new EDA_DRAW_PANEL_GAL, that can be switched anytime. * There are some new layers for displaying multilayer pads, vias & pads holes (these are not shown yet on the right sidebar in pcbnew) * Display order of layers is different than in previous versions (if you are curious - you may check m_galLayerOrder@pcbnew/basepcbframe.cpp). Preserving usual order would result in not very natural display, such as showing silkscreen texts on the bottom. * Introduced new hotkey (Alt+F12) and new menu option (View->Switch canvas) for switching canvas during runtime. * Some of classes (mostly derived from BOARD_ITEM) now includes ViewBBox & ViewGetLayers methods. * Removed tools/class_painter.h, as now it is extended and included in source code. Build changes: * GAL-based rendering option is turned on by a new compilation CMake option KICAD_GAL. * When compiling with CMake option KICAD_GAL=ON, GLEW and Cairo libraries are required. * GAL-related code is compiled into a static library (common/libgal). * Build with KICAD_GAL=OFF should not need any new libraries and should come out as a standard version of Kicad Currently most of items in pcbnew can be displayed using OpenGL (to be done are DIMENSIONS and MARKERS). More details about GAL can be found in: http://www.ohwr.org/attachments/1884/view-spec.pdf
2013-04-02 06:54:03 +00:00
using namespace KIGFX;
Introduction of Graphics Abstraction Layer based rendering for pcbnew. New classes: - VIEW - represents view that is seen by user, takes care of layer ordering & visibility and how it is displayed (which location, how much zoomed, etc.) - VIEW_ITEM - Base class for every item that can be displayed on VIEW (the biggest change is that now it may be necessary to override ViewBBox & ViewGetLayers method for derived classes). - EDA_DRAW_PANEL_GAL - Inherits after EDA_DRAW_PANEL, displays VIEW output, right now it is not editable (in opposite to usual EDA_DRAW_PANEL). - GAL/OPENGL_GAL/CAIRO_GAL - Base Graphics Abstraction Layer class + two different flavours (Cairo is not fully supported yet), that offers methods to draw primitives using different libraries. - WX_VIEW_CONTROLS - Controller for VIEW, handles user events, allows zooming, panning, etc. - PAINTER/PCB_PAINTER - Classes that uses GAL interface to draw items (as you may have already guessed - PCB_PAINTER is a class for drawing PCB specific object, PAINTER is an abstract class). Its methods are invoked by VIEW, when an item has to be drawn. To display a new type of item - you need to implement draw(ITEM_TYPE*) method that draws it using GAL methods. - STROKE_FONT - Implements stroke font drawing using GAL methods. Most important changes to Kicad original code: * EDA_ITEM now inherits from VIEW_ITEM, which is a base class for all drawable objects. * EDA_DRAW_FRAME contains both usual EDA_DRAW_PANEL and new EDA_DRAW_PANEL_GAL, that can be switched anytime. * There are some new layers for displaying multilayer pads, vias & pads holes (these are not shown yet on the right sidebar in pcbnew) * Display order of layers is different than in previous versions (if you are curious - you may check m_galLayerOrder@pcbnew/basepcbframe.cpp). Preserving usual order would result in not very natural display, such as showing silkscreen texts on the bottom. * Introduced new hotkey (Alt+F12) and new menu option (View->Switch canvas) for switching canvas during runtime. * Some of classes (mostly derived from BOARD_ITEM) now includes ViewBBox & ViewGetLayers methods. * Removed tools/class_painter.h, as now it is extended and included in source code. Build changes: * GAL-based rendering option is turned on by a new compilation CMake option KICAD_GAL. * When compiling with CMake option KICAD_GAL=ON, GLEW and Cairo libraries are required. * GAL-related code is compiled into a static library (common/libgal). * Build with KICAD_GAL=OFF should not need any new libraries and should come out as a standard version of Kicad Currently most of items in pcbnew can be displayed using OpenGL (to be done are DIMENSIONS and MARKERS). More details about GAL can be found in: http://www.ohwr.org/attachments/1884/view-spec.pdf
2013-04-02 06:54:03 +00:00
2013-09-24 14:12:02 +00:00
const wxEventType WX_VIEW_CONTROLS::EVT_REFRESH_MOUSE = wxNewEventType();
static std::unique_ptr<ZOOM_CONTROLLER> GetZoomControllerForPlatform()
{
#ifdef __WXMAC__
// On Apple pointer devices, wheel events occur frequently and with
// smaller rotation values. For those devices, let's handle zoom
// based on the rotation amount rather than the time difference.
return std::make_unique<CONSTANT_ZOOM_CONTROLLER>( CONSTANT_ZOOM_CONTROLLER::MAC_SCALE );
#elif __WXGTK3__
// GTK3 is similar, but the scale constant is smaller
return std::make_unique<CONSTANT_ZOOM_CONTROLLER>( CONSTANT_ZOOM_CONTROLLER::GTK3_SCALE );
#else
return std::make_unique<ACCELERATING_ZOOM_CONTROLLER>();
#endif
}
2015-05-18 11:48:10 +00:00
WX_VIEW_CONTROLS::WX_VIEW_CONTROLS( VIEW* aView, wxScrolledCanvas* aParentPanel ) :
VIEW_CONTROLS( aView ),
m_state( IDLE ),
m_parentPanel( aParentPanel ),
m_scrollScale( 1.0, 1.0 ),
2020-05-25 23:29:41 +00:00
m_initialZoomScale( 0.0 ),
2019-06-17 13:00:56 +00:00
#ifdef __WXGTK3__
m_lastTimestamp( 0 ),
2019-06-17 13:00:56 +00:00
#endif
m_cursorPos( 0, 0 ),
m_updateCursor( true )
Introduction of Graphics Abstraction Layer based rendering for pcbnew. New classes: - VIEW - represents view that is seen by user, takes care of layer ordering & visibility and how it is displayed (which location, how much zoomed, etc.) - VIEW_ITEM - Base class for every item that can be displayed on VIEW (the biggest change is that now it may be necessary to override ViewBBox & ViewGetLayers method for derived classes). - EDA_DRAW_PANEL_GAL - Inherits after EDA_DRAW_PANEL, displays VIEW output, right now it is not editable (in opposite to usual EDA_DRAW_PANEL). - GAL/OPENGL_GAL/CAIRO_GAL - Base Graphics Abstraction Layer class + two different flavours (Cairo is not fully supported yet), that offers methods to draw primitives using different libraries. - WX_VIEW_CONTROLS - Controller for VIEW, handles user events, allows zooming, panning, etc. - PAINTER/PCB_PAINTER - Classes that uses GAL interface to draw items (as you may have already guessed - PCB_PAINTER is a class for drawing PCB specific object, PAINTER is an abstract class). Its methods are invoked by VIEW, when an item has to be drawn. To display a new type of item - you need to implement draw(ITEM_TYPE*) method that draws it using GAL methods. - STROKE_FONT - Implements stroke font drawing using GAL methods. Most important changes to Kicad original code: * EDA_ITEM now inherits from VIEW_ITEM, which is a base class for all drawable objects. * EDA_DRAW_FRAME contains both usual EDA_DRAW_PANEL and new EDA_DRAW_PANEL_GAL, that can be switched anytime. * There are some new layers for displaying multilayer pads, vias & pads holes (these are not shown yet on the right sidebar in pcbnew) * Display order of layers is different than in previous versions (if you are curious - you may check m_galLayerOrder@pcbnew/basepcbframe.cpp). Preserving usual order would result in not very natural display, such as showing silkscreen texts on the bottom. * Introduced new hotkey (Alt+F12) and new menu option (View->Switch canvas) for switching canvas during runtime. * Some of classes (mostly derived from BOARD_ITEM) now includes ViewBBox & ViewGetLayers methods. * Removed tools/class_painter.h, as now it is extended and included in source code. Build changes: * GAL-based rendering option is turned on by a new compilation CMake option KICAD_GAL. * When compiling with CMake option KICAD_GAL=ON, GLEW and Cairo libraries are required. * GAL-related code is compiled into a static library (common/libgal). * Build with KICAD_GAL=OFF should not need any new libraries and should come out as a standard version of Kicad Currently most of items in pcbnew can be displayed using OpenGL (to be done are DIMENSIONS and MARKERS). More details about GAL can be found in: http://www.ohwr.org/attachments/1884/view-spec.pdf
2013-04-02 06:54:03 +00:00
{
LoadSettings();
2013-10-14 18:40:36 +00:00
m_parentPanel->Connect( wxEVT_MOTION,
wxMouseEventHandler( WX_VIEW_CONTROLS::onMotion ), NULL, this );
#if wxCHECK_VERSION( 3, 1, 0 ) || defined( USE_OSX_MAGNIFY_EVENT )
2015-05-21 20:54:29 +00:00
m_parentPanel->Connect( wxEVT_MAGNIFY,
wxMouseEventHandler( WX_VIEW_CONTROLS::onMagnify ), NULL, this );
#endif
2013-10-14 18:40:36 +00:00
m_parentPanel->Connect( wxEVT_MOUSEWHEEL,
wxMouseEventHandler( WX_VIEW_CONTROLS::onWheel ), NULL, this );
m_parentPanel->Connect( wxEVT_MIDDLE_UP,
wxMouseEventHandler( WX_VIEW_CONTROLS::onButton ), NULL, this );
m_parentPanel->Connect( wxEVT_MIDDLE_DOWN,
wxMouseEventHandler( WX_VIEW_CONTROLS::onButton ), NULL, this );
m_parentPanel->Connect( wxEVT_LEFT_UP,
wxMouseEventHandler( WX_VIEW_CONTROLS::onButton ), NULL, this );
m_parentPanel->Connect( wxEVT_LEFT_DOWN,
wxMouseEventHandler( WX_VIEW_CONTROLS::onButton ), NULL, this );
m_parentPanel->Connect( wxEVT_RIGHT_UP,
wxMouseEventHandler( WX_VIEW_CONTROLS::onButton ), NULL, this );
m_parentPanel->Connect( wxEVT_RIGHT_DOWN,
wxMouseEventHandler( WX_VIEW_CONTROLS::onButton ), NULL, this );
2013-04-22 09:08:02 +00:00
#if defined _WIN32 || defined _WIN64
2013-10-14 18:40:36 +00:00
m_parentPanel->Connect( wxEVT_ENTER_WINDOW,
wxMouseEventHandler( WX_VIEW_CONTROLS::onEnter ), NULL, this );
2013-04-22 09:08:02 +00:00
#endif
2015-03-10 12:20:38 +00:00
m_parentPanel->Connect( wxEVT_LEAVE_WINDOW,
wxMouseEventHandler( WX_VIEW_CONTROLS::onLeave ), NULL, this );
2015-05-18 11:48:10 +00:00
m_parentPanel->Connect( wxEVT_SCROLLWIN_THUMBTRACK,
wxScrollWinEventHandler( WX_VIEW_CONTROLS::onScroll ), NULL, this );
m_parentPanel->Connect( wxEVT_SCROLLWIN_PAGEUP,
wxScrollWinEventHandler( WX_VIEW_CONTROLS::onScroll ), NULL, this );
m_parentPanel->Connect( wxEVT_SCROLLWIN_PAGEDOWN,
wxScrollWinEventHandler( WX_VIEW_CONTROLS::onScroll ), NULL, this );
m_parentPanel->Connect( wxEVT_SCROLLWIN_BOTTOM,
wxScrollWinEventHandler( WX_VIEW_CONTROLS::onScroll ), NULL, this );
m_parentPanel->Connect( wxEVT_SCROLLWIN_TOP,
wxScrollWinEventHandler( WX_VIEW_CONTROLS::onScroll ), NULL, this );
m_parentPanel->Connect( wxEVT_SCROLLWIN_LINEUP,
wxScrollWinEventHandler( WX_VIEW_CONTROLS::onScroll ), NULL, this );
m_parentPanel->Connect( wxEVT_SCROLLWIN_LINEDOWN,
wxScrollWinEventHandler( WX_VIEW_CONTROLS::onScroll ), NULL, this );
m_cursorWarped = false;
m_panTimer.SetOwner( this );
this->Connect( wxEVT_TIMER, wxTimerEventHandler( WX_VIEW_CONTROLS::onTimer ), NULL, this );
m_settings.m_lastKeyboardCursorPositionValid = false;
m_settings.m_lastKeyboardCursorPosition = { 0.0, 0.0 };
m_settings.m_lastKeyboardCursorCommand = 0;
Introduction of Graphics Abstraction Layer based rendering for pcbnew. New classes: - VIEW - represents view that is seen by user, takes care of layer ordering & visibility and how it is displayed (which location, how much zoomed, etc.) - VIEW_ITEM - Base class for every item that can be displayed on VIEW (the biggest change is that now it may be necessary to override ViewBBox & ViewGetLayers method for derived classes). - EDA_DRAW_PANEL_GAL - Inherits after EDA_DRAW_PANEL, displays VIEW output, right now it is not editable (in opposite to usual EDA_DRAW_PANEL). - GAL/OPENGL_GAL/CAIRO_GAL - Base Graphics Abstraction Layer class + two different flavours (Cairo is not fully supported yet), that offers methods to draw primitives using different libraries. - WX_VIEW_CONTROLS - Controller for VIEW, handles user events, allows zooming, panning, etc. - PAINTER/PCB_PAINTER - Classes that uses GAL interface to draw items (as you may have already guessed - PCB_PAINTER is a class for drawing PCB specific object, PAINTER is an abstract class). Its methods are invoked by VIEW, when an item has to be drawn. To display a new type of item - you need to implement draw(ITEM_TYPE*) method that draws it using GAL methods. - STROKE_FONT - Implements stroke font drawing using GAL methods. Most important changes to Kicad original code: * EDA_ITEM now inherits from VIEW_ITEM, which is a base class for all drawable objects. * EDA_DRAW_FRAME contains both usual EDA_DRAW_PANEL and new EDA_DRAW_PANEL_GAL, that can be switched anytime. * There are some new layers for displaying multilayer pads, vias & pads holes (these are not shown yet on the right sidebar in pcbnew) * Display order of layers is different than in previous versions (if you are curious - you may check m_galLayerOrder@pcbnew/basepcbframe.cpp). Preserving usual order would result in not very natural display, such as showing silkscreen texts on the bottom. * Introduced new hotkey (Alt+F12) and new menu option (View->Switch canvas) for switching canvas during runtime. * Some of classes (mostly derived from BOARD_ITEM) now includes ViewBBox & ViewGetLayers methods. * Removed tools/class_painter.h, as now it is extended and included in source code. Build changes: * GAL-based rendering option is turned on by a new compilation CMake option KICAD_GAL. * When compiling with CMake option KICAD_GAL=ON, GLEW and Cairo libraries are required. * GAL-related code is compiled into a static library (common/libgal). * Build with KICAD_GAL=OFF should not need any new libraries and should come out as a standard version of Kicad Currently most of items in pcbnew can be displayed using OpenGL (to be done are DIMENSIONS and MARKERS). More details about GAL can be found in: http://www.ohwr.org/attachments/1884/view-spec.pdf
2013-04-02 06:54:03 +00:00
}
WX_VIEW_CONTROLS::~WX_VIEW_CONTROLS()
{
}
void WX_VIEW_CONTROLS::LoadSettings()
{
COMMON_SETTINGS* cfg = Pgm().GetCommonSettings();
m_settings.m_warpCursor = cfg->m_Input.center_on_zoom;
m_settings.m_autoPanSettingEnabled = cfg->m_Input.auto_pan;
m_settings.m_autoPanAcceleration = cfg->m_Input.auto_pan_acceleration;
m_settings.m_horizontalPan = cfg->m_Input.horizontal_pan;
m_settings.m_zoomAcceleration = cfg->m_Input.zoom_acceleration;
m_settings.m_zoomSpeed = cfg->m_Input.zoom_speed;
m_settings.m_zoomSpeedAuto = cfg->m_Input.zoom_speed_auto;
m_settings.m_scrollModifierZoom = cfg->m_Input.scroll_modifier_zoom;
m_settings.m_scrollModifierPanH = cfg->m_Input.scroll_modifier_pan_h;
m_settings.m_scrollModifierPanV = cfg->m_Input.scroll_modifier_pan_v;
m_settings.m_dragMiddle = static_cast<MOUSE_DRAG_ACTION>( cfg->m_Input.drag_middle );
m_settings.m_dragRight = static_cast<MOUSE_DRAG_ACTION>( cfg->m_Input.drag_right );
m_zoomController.reset();
if( cfg->m_Input.zoom_speed_auto )
{
// TODO(JE) this ignores the acceleration option
m_zoomController = GetZoomControllerForPlatform();
}
else
{
if( cfg->m_Input.zoom_acceleration )
{
m_zoomController =
std::make_unique<ACCELERATING_ZOOM_CONTROLLER>( cfg->m_Input.zoom_speed );
}
else
{
double scale = CONSTANT_ZOOM_CONTROLLER::MANUAL_SCALE_FACTOR * cfg->m_Input.zoom_speed;
m_zoomController = std::make_unique<CONSTANT_ZOOM_CONTROLLER>( scale );
}
}
}
void WX_VIEW_CONTROLS::onMotion( wxMouseEvent& aEvent )
Introduction of Graphics Abstraction Layer based rendering for pcbnew. New classes: - VIEW - represents view that is seen by user, takes care of layer ordering & visibility and how it is displayed (which location, how much zoomed, etc.) - VIEW_ITEM - Base class for every item that can be displayed on VIEW (the biggest change is that now it may be necessary to override ViewBBox & ViewGetLayers method for derived classes). - EDA_DRAW_PANEL_GAL - Inherits after EDA_DRAW_PANEL, displays VIEW output, right now it is not editable (in opposite to usual EDA_DRAW_PANEL). - GAL/OPENGL_GAL/CAIRO_GAL - Base Graphics Abstraction Layer class + two different flavours (Cairo is not fully supported yet), that offers methods to draw primitives using different libraries. - WX_VIEW_CONTROLS - Controller for VIEW, handles user events, allows zooming, panning, etc. - PAINTER/PCB_PAINTER - Classes that uses GAL interface to draw items (as you may have already guessed - PCB_PAINTER is a class for drawing PCB specific object, PAINTER is an abstract class). Its methods are invoked by VIEW, when an item has to be drawn. To display a new type of item - you need to implement draw(ITEM_TYPE*) method that draws it using GAL methods. - STROKE_FONT - Implements stroke font drawing using GAL methods. Most important changes to Kicad original code: * EDA_ITEM now inherits from VIEW_ITEM, which is a base class for all drawable objects. * EDA_DRAW_FRAME contains both usual EDA_DRAW_PANEL and new EDA_DRAW_PANEL_GAL, that can be switched anytime. * There are some new layers for displaying multilayer pads, vias & pads holes (these are not shown yet on the right sidebar in pcbnew) * Display order of layers is different than in previous versions (if you are curious - you may check m_galLayerOrder@pcbnew/basepcbframe.cpp). Preserving usual order would result in not very natural display, such as showing silkscreen texts on the bottom. * Introduced new hotkey (Alt+F12) and new menu option (View->Switch canvas) for switching canvas during runtime. * Some of classes (mostly derived from BOARD_ITEM) now includes ViewBBox & ViewGetLayers methods. * Removed tools/class_painter.h, as now it is extended and included in source code. Build changes: * GAL-based rendering option is turned on by a new compilation CMake option KICAD_GAL. * When compiling with CMake option KICAD_GAL=ON, GLEW and Cairo libraries are required. * GAL-related code is compiled into a static library (common/libgal). * Build with KICAD_GAL=OFF should not need any new libraries and should come out as a standard version of Kicad Currently most of items in pcbnew can be displayed using OpenGL (to be done are DIMENSIONS and MARKERS). More details about GAL can be found in: http://www.ohwr.org/attachments/1884/view-spec.pdf
2013-04-02 06:54:03 +00:00
{
bool isAutoPanning = false;
VECTOR2D mousePos( aEvent.GetX(), aEvent.GetY() );
if( m_settings.m_autoPanEnabled && m_settings.m_autoPanSettingEnabled )
isAutoPanning = handleAutoPanning( aEvent );
if( !isAutoPanning && aEvent.Dragging() )
Introduction of Graphics Abstraction Layer based rendering for pcbnew. New classes: - VIEW - represents view that is seen by user, takes care of layer ordering & visibility and how it is displayed (which location, how much zoomed, etc.) - VIEW_ITEM - Base class for every item that can be displayed on VIEW (the biggest change is that now it may be necessary to override ViewBBox & ViewGetLayers method for derived classes). - EDA_DRAW_PANEL_GAL - Inherits after EDA_DRAW_PANEL, displays VIEW output, right now it is not editable (in opposite to usual EDA_DRAW_PANEL). - GAL/OPENGL_GAL/CAIRO_GAL - Base Graphics Abstraction Layer class + two different flavours (Cairo is not fully supported yet), that offers methods to draw primitives using different libraries. - WX_VIEW_CONTROLS - Controller for VIEW, handles user events, allows zooming, panning, etc. - PAINTER/PCB_PAINTER - Classes that uses GAL interface to draw items (as you may have already guessed - PCB_PAINTER is a class for drawing PCB specific object, PAINTER is an abstract class). Its methods are invoked by VIEW, when an item has to be drawn. To display a new type of item - you need to implement draw(ITEM_TYPE*) method that draws it using GAL methods. - STROKE_FONT - Implements stroke font drawing using GAL methods. Most important changes to Kicad original code: * EDA_ITEM now inherits from VIEW_ITEM, which is a base class for all drawable objects. * EDA_DRAW_FRAME contains both usual EDA_DRAW_PANEL and new EDA_DRAW_PANEL_GAL, that can be switched anytime. * There are some new layers for displaying multilayer pads, vias & pads holes (these are not shown yet on the right sidebar in pcbnew) * Display order of layers is different than in previous versions (if you are curious - you may check m_galLayerOrder@pcbnew/basepcbframe.cpp). Preserving usual order would result in not very natural display, such as showing silkscreen texts on the bottom. * Introduced new hotkey (Alt+F12) and new menu option (View->Switch canvas) for switching canvas during runtime. * Some of classes (mostly derived from BOARD_ITEM) now includes ViewBBox & ViewGetLayers methods. * Removed tools/class_painter.h, as now it is extended and included in source code. Build changes: * GAL-based rendering option is turned on by a new compilation CMake option KICAD_GAL. * When compiling with CMake option KICAD_GAL=ON, GLEW and Cairo libraries are required. * GAL-related code is compiled into a static library (common/libgal). * Build with KICAD_GAL=OFF should not need any new libraries and should come out as a standard version of Kicad Currently most of items in pcbnew can be displayed using OpenGL (to be done are DIMENSIONS and MARKERS). More details about GAL can be found in: http://www.ohwr.org/attachments/1884/view-spec.pdf
2013-04-02 06:54:03 +00:00
{
if( m_state == DRAG_PANNING )
{
VECTOR2D d = m_dragStartPoint - mousePos;
VECTOR2D delta = m_view->ToWorld( d, false );
Introduction of Graphics Abstraction Layer based rendering for pcbnew. New classes: - VIEW - represents view that is seen by user, takes care of layer ordering & visibility and how it is displayed (which location, how much zoomed, etc.) - VIEW_ITEM - Base class for every item that can be displayed on VIEW (the biggest change is that now it may be necessary to override ViewBBox & ViewGetLayers method for derived classes). - EDA_DRAW_PANEL_GAL - Inherits after EDA_DRAW_PANEL, displays VIEW output, right now it is not editable (in opposite to usual EDA_DRAW_PANEL). - GAL/OPENGL_GAL/CAIRO_GAL - Base Graphics Abstraction Layer class + two different flavours (Cairo is not fully supported yet), that offers methods to draw primitives using different libraries. - WX_VIEW_CONTROLS - Controller for VIEW, handles user events, allows zooming, panning, etc. - PAINTER/PCB_PAINTER - Classes that uses GAL interface to draw items (as you may have already guessed - PCB_PAINTER is a class for drawing PCB specific object, PAINTER is an abstract class). Its methods are invoked by VIEW, when an item has to be drawn. To display a new type of item - you need to implement draw(ITEM_TYPE*) method that draws it using GAL methods. - STROKE_FONT - Implements stroke font drawing using GAL methods. Most important changes to Kicad original code: * EDA_ITEM now inherits from VIEW_ITEM, which is a base class for all drawable objects. * EDA_DRAW_FRAME contains both usual EDA_DRAW_PANEL and new EDA_DRAW_PANEL_GAL, that can be switched anytime. * There are some new layers for displaying multilayer pads, vias & pads holes (these are not shown yet on the right sidebar in pcbnew) * Display order of layers is different than in previous versions (if you are curious - you may check m_galLayerOrder@pcbnew/basepcbframe.cpp). Preserving usual order would result in not very natural display, such as showing silkscreen texts on the bottom. * Introduced new hotkey (Alt+F12) and new menu option (View->Switch canvas) for switching canvas during runtime. * Some of classes (mostly derived from BOARD_ITEM) now includes ViewBBox & ViewGetLayers methods. * Removed tools/class_painter.h, as now it is extended and included in source code. Build changes: * GAL-based rendering option is turned on by a new compilation CMake option KICAD_GAL. * When compiling with CMake option KICAD_GAL=ON, GLEW and Cairo libraries are required. * GAL-related code is compiled into a static library (common/libgal). * Build with KICAD_GAL=OFF should not need any new libraries and should come out as a standard version of Kicad Currently most of items in pcbnew can be displayed using OpenGL (to be done are DIMENSIONS and MARKERS). More details about GAL can be found in: http://www.ohwr.org/attachments/1884/view-spec.pdf
2013-04-02 06:54:03 +00:00
m_view->SetCenter( m_lookStartPoint + delta );
aEvent.StopPropagation();
}
else if( m_state == DRAG_ZOOMING )
{
VECTOR2D d = m_dragStartPoint - mousePos;
double scale = 1 + ( d.y * m_settings.m_zoomSpeed * 0.001 );
wxLogTrace( traceZoomScroll, wxString::Format( "dy: %f scale: %f", d.y, scale ) );
m_view->SetScale( m_initialZoomScale * scale, m_view->ToWorld( m_dragStartPoint ) );
aEvent.StopPropagation();
}
}
if( m_updateCursor ) // do not update the cursor position if it was explicitly set
m_cursorPos = m_view->ToWorld( mousePos );
else
m_updateCursor = true;
aEvent.Skip();
Introduction of Graphics Abstraction Layer based rendering for pcbnew. New classes: - VIEW - represents view that is seen by user, takes care of layer ordering & visibility and how it is displayed (which location, how much zoomed, etc.) - VIEW_ITEM - Base class for every item that can be displayed on VIEW (the biggest change is that now it may be necessary to override ViewBBox & ViewGetLayers method for derived classes). - EDA_DRAW_PANEL_GAL - Inherits after EDA_DRAW_PANEL, displays VIEW output, right now it is not editable (in opposite to usual EDA_DRAW_PANEL). - GAL/OPENGL_GAL/CAIRO_GAL - Base Graphics Abstraction Layer class + two different flavours (Cairo is not fully supported yet), that offers methods to draw primitives using different libraries. - WX_VIEW_CONTROLS - Controller for VIEW, handles user events, allows zooming, panning, etc. - PAINTER/PCB_PAINTER - Classes that uses GAL interface to draw items (as you may have already guessed - PCB_PAINTER is a class for drawing PCB specific object, PAINTER is an abstract class). Its methods are invoked by VIEW, when an item has to be drawn. To display a new type of item - you need to implement draw(ITEM_TYPE*) method that draws it using GAL methods. - STROKE_FONT - Implements stroke font drawing using GAL methods. Most important changes to Kicad original code: * EDA_ITEM now inherits from VIEW_ITEM, which is a base class for all drawable objects. * EDA_DRAW_FRAME contains both usual EDA_DRAW_PANEL and new EDA_DRAW_PANEL_GAL, that can be switched anytime. * There are some new layers for displaying multilayer pads, vias & pads holes (these are not shown yet on the right sidebar in pcbnew) * Display order of layers is different than in previous versions (if you are curious - you may check m_galLayerOrder@pcbnew/basepcbframe.cpp). Preserving usual order would result in not very natural display, such as showing silkscreen texts on the bottom. * Introduced new hotkey (Alt+F12) and new menu option (View->Switch canvas) for switching canvas during runtime. * Some of classes (mostly derived from BOARD_ITEM) now includes ViewBBox & ViewGetLayers methods. * Removed tools/class_painter.h, as now it is extended and included in source code. Build changes: * GAL-based rendering option is turned on by a new compilation CMake option KICAD_GAL. * When compiling with CMake option KICAD_GAL=ON, GLEW and Cairo libraries are required. * GAL-related code is compiled into a static library (common/libgal). * Build with KICAD_GAL=OFF should not need any new libraries and should come out as a standard version of Kicad Currently most of items in pcbnew can be displayed using OpenGL (to be done are DIMENSIONS and MARKERS). More details about GAL can be found in: http://www.ohwr.org/attachments/1884/view-spec.pdf
2013-04-02 06:54:03 +00:00
}
void WX_VIEW_CONTROLS::onWheel( wxMouseEvent& aEvent )
Introduction of Graphics Abstraction Layer based rendering for pcbnew. New classes: - VIEW - represents view that is seen by user, takes care of layer ordering & visibility and how it is displayed (which location, how much zoomed, etc.) - VIEW_ITEM - Base class for every item that can be displayed on VIEW (the biggest change is that now it may be necessary to override ViewBBox & ViewGetLayers method for derived classes). - EDA_DRAW_PANEL_GAL - Inherits after EDA_DRAW_PANEL, displays VIEW output, right now it is not editable (in opposite to usual EDA_DRAW_PANEL). - GAL/OPENGL_GAL/CAIRO_GAL - Base Graphics Abstraction Layer class + two different flavours (Cairo is not fully supported yet), that offers methods to draw primitives using different libraries. - WX_VIEW_CONTROLS - Controller for VIEW, handles user events, allows zooming, panning, etc. - PAINTER/PCB_PAINTER - Classes that uses GAL interface to draw items (as you may have already guessed - PCB_PAINTER is a class for drawing PCB specific object, PAINTER is an abstract class). Its methods are invoked by VIEW, when an item has to be drawn. To display a new type of item - you need to implement draw(ITEM_TYPE*) method that draws it using GAL methods. - STROKE_FONT - Implements stroke font drawing using GAL methods. Most important changes to Kicad original code: * EDA_ITEM now inherits from VIEW_ITEM, which is a base class for all drawable objects. * EDA_DRAW_FRAME contains both usual EDA_DRAW_PANEL and new EDA_DRAW_PANEL_GAL, that can be switched anytime. * There are some new layers for displaying multilayer pads, vias & pads holes (these are not shown yet on the right sidebar in pcbnew) * Display order of layers is different than in previous versions (if you are curious - you may check m_galLayerOrder@pcbnew/basepcbframe.cpp). Preserving usual order would result in not very natural display, such as showing silkscreen texts on the bottom. * Introduced new hotkey (Alt+F12) and new menu option (View->Switch canvas) for switching canvas during runtime. * Some of classes (mostly derived from BOARD_ITEM) now includes ViewBBox & ViewGetLayers methods. * Removed tools/class_painter.h, as now it is extended and included in source code. Build changes: * GAL-based rendering option is turned on by a new compilation CMake option KICAD_GAL. * When compiling with CMake option KICAD_GAL=ON, GLEW and Cairo libraries are required. * GAL-related code is compiled into a static library (common/libgal). * Build with KICAD_GAL=OFF should not need any new libraries and should come out as a standard version of Kicad Currently most of items in pcbnew can be displayed using OpenGL (to be done are DIMENSIONS and MARKERS). More details about GAL can be found in: http://www.ohwr.org/attachments/1884/view-spec.pdf
2013-04-02 06:54:03 +00:00
{
#ifdef __WXGTK3__
if( aEvent.GetTimestamp() == m_lastTimestamp )
{
aEvent.Skip( false );
return;
}
m_lastTimestamp = aEvent.GetTimestamp();
#endif
const double wheelPanSpeed = 0.001;
const int axis = aEvent.GetWheelAxis();
if( axis == wxMOUSE_WHEEL_HORIZONTAL && !m_settings.m_horizontalPan )
return;
// Pick the modifier, if any. Shift beats control beats alt, we don't support more than one.
int modifiers =
aEvent.ShiftDown() ? WXK_SHIFT :
( aEvent.ControlDown() ? WXK_CONTROL : ( aEvent.AltDown() ? WXK_ALT : 0 ) );
// Restrict zoom handling to the vertical axis, otherwise horizontal
// scrolling events (e.g. touchpads and some mice) end up interpreted
// as vertical scroll events and confuse the user.
if( axis == wxMOUSE_WHEEL_VERTICAL && modifiers == m_settings.m_scrollModifierZoom )
{
const int rotation = aEvent.GetWheelRotation();
const double zoomScale = m_zoomController->GetScaleForRotation( rotation );
if( IsCursorWarpingEnabled() )
{
CenterOnCursor();
m_view->SetScale( m_view->GetScale() * zoomScale );
}
else
{
const VECTOR2D anchor = m_view->ToWorld( VECTOR2D( aEvent.GetX(), aEvent.GetY() ) );
m_view->SetScale( m_view->GetScale() * zoomScale, anchor );
}
}
else
{
// Scrolling
VECTOR2D scrollVec = m_view->ToWorld( m_view->GetScreenPixelSize(), false ) *
( (double) aEvent.GetWheelRotation() * wheelPanSpeed );
double scrollX = 0.0;
double scrollY = 0.0;
if( axis == wxMOUSE_WHEEL_HORIZONTAL || modifiers == m_settings.m_scrollModifierPanH )
scrollX = scrollVec.x;
else
scrollY = -scrollVec.y;
VECTOR2D delta( scrollX, scrollY );
m_view->SetCenter( m_view->GetCenter() + delta );
refreshMouse();
}
2013-04-22 09:08:02 +00:00
// Do not skip this event, otherwise wxWidgets will fire
// 3 wxEVT_SCROLLWIN_LINEUP or wxEVT_SCROLLWIN_LINEDOWN (normal wxWidgets behavior)
// and we do not want that.
m_parentPanel->Refresh();
Introduction of Graphics Abstraction Layer based rendering for pcbnew. New classes: - VIEW - represents view that is seen by user, takes care of layer ordering & visibility and how it is displayed (which location, how much zoomed, etc.) - VIEW_ITEM - Base class for every item that can be displayed on VIEW (the biggest change is that now it may be necessary to override ViewBBox & ViewGetLayers method for derived classes). - EDA_DRAW_PANEL_GAL - Inherits after EDA_DRAW_PANEL, displays VIEW output, right now it is not editable (in opposite to usual EDA_DRAW_PANEL). - GAL/OPENGL_GAL/CAIRO_GAL - Base Graphics Abstraction Layer class + two different flavours (Cairo is not fully supported yet), that offers methods to draw primitives using different libraries. - WX_VIEW_CONTROLS - Controller for VIEW, handles user events, allows zooming, panning, etc. - PAINTER/PCB_PAINTER - Classes that uses GAL interface to draw items (as you may have already guessed - PCB_PAINTER is a class for drawing PCB specific object, PAINTER is an abstract class). Its methods are invoked by VIEW, when an item has to be drawn. To display a new type of item - you need to implement draw(ITEM_TYPE*) method that draws it using GAL methods. - STROKE_FONT - Implements stroke font drawing using GAL methods. Most important changes to Kicad original code: * EDA_ITEM now inherits from VIEW_ITEM, which is a base class for all drawable objects. * EDA_DRAW_FRAME contains both usual EDA_DRAW_PANEL and new EDA_DRAW_PANEL_GAL, that can be switched anytime. * There are some new layers for displaying multilayer pads, vias & pads holes (these are not shown yet on the right sidebar in pcbnew) * Display order of layers is different than in previous versions (if you are curious - you may check m_galLayerOrder@pcbnew/basepcbframe.cpp). Preserving usual order would result in not very natural display, such as showing silkscreen texts on the bottom. * Introduced new hotkey (Alt+F12) and new menu option (View->Switch canvas) for switching canvas during runtime. * Some of classes (mostly derived from BOARD_ITEM) now includes ViewBBox & ViewGetLayers methods. * Removed tools/class_painter.h, as now it is extended and included in source code. Build changes: * GAL-based rendering option is turned on by a new compilation CMake option KICAD_GAL. * When compiling with CMake option KICAD_GAL=ON, GLEW and Cairo libraries are required. * GAL-related code is compiled into a static library (common/libgal). * Build with KICAD_GAL=OFF should not need any new libraries and should come out as a standard version of Kicad Currently most of items in pcbnew can be displayed using OpenGL (to be done are DIMENSIONS and MARKERS). More details about GAL can be found in: http://www.ohwr.org/attachments/1884/view-spec.pdf
2013-04-02 06:54:03 +00:00
}
#if wxCHECK_VERSION( 3, 1, 0 ) || defined( USE_OSX_MAGNIFY_EVENT )
2015-05-21 20:54:29 +00:00
void WX_VIEW_CONTROLS::onMagnify( wxMouseEvent& aEvent )
{
// Scale based on the magnification from our underlying magnification event.
VECTOR2D anchor = m_view->ToWorld( VECTOR2D( aEvent.GetX(), aEvent.GetY() ) );
m_view->SetScale( m_view->GetScale() * ( aEvent.GetMagnification() + 1.0f ), anchor );
2015-05-21 20:54:29 +00:00
aEvent.Skip();
}
#endif
void WX_VIEW_CONTROLS::onButton( wxMouseEvent& aEvent )
Introduction of Graphics Abstraction Layer based rendering for pcbnew. New classes: - VIEW - represents view that is seen by user, takes care of layer ordering & visibility and how it is displayed (which location, how much zoomed, etc.) - VIEW_ITEM - Base class for every item that can be displayed on VIEW (the biggest change is that now it may be necessary to override ViewBBox & ViewGetLayers method for derived classes). - EDA_DRAW_PANEL_GAL - Inherits after EDA_DRAW_PANEL, displays VIEW output, right now it is not editable (in opposite to usual EDA_DRAW_PANEL). - GAL/OPENGL_GAL/CAIRO_GAL - Base Graphics Abstraction Layer class + two different flavours (Cairo is not fully supported yet), that offers methods to draw primitives using different libraries. - WX_VIEW_CONTROLS - Controller for VIEW, handles user events, allows zooming, panning, etc. - PAINTER/PCB_PAINTER - Classes that uses GAL interface to draw items (as you may have already guessed - PCB_PAINTER is a class for drawing PCB specific object, PAINTER is an abstract class). Its methods are invoked by VIEW, when an item has to be drawn. To display a new type of item - you need to implement draw(ITEM_TYPE*) method that draws it using GAL methods. - STROKE_FONT - Implements stroke font drawing using GAL methods. Most important changes to Kicad original code: * EDA_ITEM now inherits from VIEW_ITEM, which is a base class for all drawable objects. * EDA_DRAW_FRAME contains both usual EDA_DRAW_PANEL and new EDA_DRAW_PANEL_GAL, that can be switched anytime. * There are some new layers for displaying multilayer pads, vias & pads holes (these are not shown yet on the right sidebar in pcbnew) * Display order of layers is different than in previous versions (if you are curious - you may check m_galLayerOrder@pcbnew/basepcbframe.cpp). Preserving usual order would result in not very natural display, such as showing silkscreen texts on the bottom. * Introduced new hotkey (Alt+F12) and new menu option (View->Switch canvas) for switching canvas during runtime. * Some of classes (mostly derived from BOARD_ITEM) now includes ViewBBox & ViewGetLayers methods. * Removed tools/class_painter.h, as now it is extended and included in source code. Build changes: * GAL-based rendering option is turned on by a new compilation CMake option KICAD_GAL. * When compiling with CMake option KICAD_GAL=ON, GLEW and Cairo libraries are required. * GAL-related code is compiled into a static library (common/libgal). * Build with KICAD_GAL=OFF should not need any new libraries and should come out as a standard version of Kicad Currently most of items in pcbnew can be displayed using OpenGL (to be done are DIMENSIONS and MARKERS). More details about GAL can be found in: http://www.ohwr.org/attachments/1884/view-spec.pdf
2013-04-02 06:54:03 +00:00
{
switch( m_state )
Introduction of Graphics Abstraction Layer based rendering for pcbnew. New classes: - VIEW - represents view that is seen by user, takes care of layer ordering & visibility and how it is displayed (which location, how much zoomed, etc.) - VIEW_ITEM - Base class for every item that can be displayed on VIEW (the biggest change is that now it may be necessary to override ViewBBox & ViewGetLayers method for derived classes). - EDA_DRAW_PANEL_GAL - Inherits after EDA_DRAW_PANEL, displays VIEW output, right now it is not editable (in opposite to usual EDA_DRAW_PANEL). - GAL/OPENGL_GAL/CAIRO_GAL - Base Graphics Abstraction Layer class + two different flavours (Cairo is not fully supported yet), that offers methods to draw primitives using different libraries. - WX_VIEW_CONTROLS - Controller for VIEW, handles user events, allows zooming, panning, etc. - PAINTER/PCB_PAINTER - Classes that uses GAL interface to draw items (as you may have already guessed - PCB_PAINTER is a class for drawing PCB specific object, PAINTER is an abstract class). Its methods are invoked by VIEW, when an item has to be drawn. To display a new type of item - you need to implement draw(ITEM_TYPE*) method that draws it using GAL methods. - STROKE_FONT - Implements stroke font drawing using GAL methods. Most important changes to Kicad original code: * EDA_ITEM now inherits from VIEW_ITEM, which is a base class for all drawable objects. * EDA_DRAW_FRAME contains both usual EDA_DRAW_PANEL and new EDA_DRAW_PANEL_GAL, that can be switched anytime. * There are some new layers for displaying multilayer pads, vias & pads holes (these are not shown yet on the right sidebar in pcbnew) * Display order of layers is different than in previous versions (if you are curious - you may check m_galLayerOrder@pcbnew/basepcbframe.cpp). Preserving usual order would result in not very natural display, such as showing silkscreen texts on the bottom. * Introduced new hotkey (Alt+F12) and new menu option (View->Switch canvas) for switching canvas during runtime. * Some of classes (mostly derived from BOARD_ITEM) now includes ViewBBox & ViewGetLayers methods. * Removed tools/class_painter.h, as now it is extended and included in source code. Build changes: * GAL-based rendering option is turned on by a new compilation CMake option KICAD_GAL. * When compiling with CMake option KICAD_GAL=ON, GLEW and Cairo libraries are required. * GAL-related code is compiled into a static library (common/libgal). * Build with KICAD_GAL=OFF should not need any new libraries and should come out as a standard version of Kicad Currently most of items in pcbnew can be displayed using OpenGL (to be done are DIMENSIONS and MARKERS). More details about GAL can be found in: http://www.ohwr.org/attachments/1884/view-spec.pdf
2013-04-02 06:54:03 +00:00
{
case IDLE:
case AUTO_PANNING:
if( ( aEvent.MiddleDown() && m_settings.m_dragMiddle == MOUSE_DRAG_ACTION::PAN ) ||
( aEvent.RightDown() && m_settings.m_dragRight == MOUSE_DRAG_ACTION::PAN ) )
{
m_dragStartPoint = VECTOR2D( aEvent.GetX(), aEvent.GetY() );
m_lookStartPoint = m_view->GetCenter();
m_state = DRAG_PANNING;
}
else if( ( aEvent.MiddleDown() && m_settings.m_dragMiddle == MOUSE_DRAG_ACTION::ZOOM ) ||
( aEvent.RightDown() && m_settings.m_dragRight == MOUSE_DRAG_ACTION::ZOOM ) )
{
m_dragStartPoint = VECTOR2D( aEvent.GetX(), aEvent.GetY() );
m_initialZoomScale = m_view->GetScale();
m_state = DRAG_ZOOMING;
}
if( aEvent.LeftUp() )
m_state = IDLE; // Stop autopanning when user release left mouse button
break;
case DRAG_ZOOMING:
case DRAG_PANNING:
if( aEvent.MiddleUp() || aEvent.LeftUp() || aEvent.RightUp() )
m_state = IDLE;
break;
}
Introduction of Graphics Abstraction Layer based rendering for pcbnew. New classes: - VIEW - represents view that is seen by user, takes care of layer ordering & visibility and how it is displayed (which location, how much zoomed, etc.) - VIEW_ITEM - Base class for every item that can be displayed on VIEW (the biggest change is that now it may be necessary to override ViewBBox & ViewGetLayers method for derived classes). - EDA_DRAW_PANEL_GAL - Inherits after EDA_DRAW_PANEL, displays VIEW output, right now it is not editable (in opposite to usual EDA_DRAW_PANEL). - GAL/OPENGL_GAL/CAIRO_GAL - Base Graphics Abstraction Layer class + two different flavours (Cairo is not fully supported yet), that offers methods to draw primitives using different libraries. - WX_VIEW_CONTROLS - Controller for VIEW, handles user events, allows zooming, panning, etc. - PAINTER/PCB_PAINTER - Classes that uses GAL interface to draw items (as you may have already guessed - PCB_PAINTER is a class for drawing PCB specific object, PAINTER is an abstract class). Its methods are invoked by VIEW, when an item has to be drawn. To display a new type of item - you need to implement draw(ITEM_TYPE*) method that draws it using GAL methods. - STROKE_FONT - Implements stroke font drawing using GAL methods. Most important changes to Kicad original code: * EDA_ITEM now inherits from VIEW_ITEM, which is a base class for all drawable objects. * EDA_DRAW_FRAME contains both usual EDA_DRAW_PANEL and new EDA_DRAW_PANEL_GAL, that can be switched anytime. * There are some new layers for displaying multilayer pads, vias & pads holes (these are not shown yet on the right sidebar in pcbnew) * Display order of layers is different than in previous versions (if you are curious - you may check m_galLayerOrder@pcbnew/basepcbframe.cpp). Preserving usual order would result in not very natural display, such as showing silkscreen texts on the bottom. * Introduced new hotkey (Alt+F12) and new menu option (View->Switch canvas) for switching canvas during runtime. * Some of classes (mostly derived from BOARD_ITEM) now includes ViewBBox & ViewGetLayers methods. * Removed tools/class_painter.h, as now it is extended and included in source code. Build changes: * GAL-based rendering option is turned on by a new compilation CMake option KICAD_GAL. * When compiling with CMake option KICAD_GAL=ON, GLEW and Cairo libraries are required. * GAL-related code is compiled into a static library (common/libgal). * Build with KICAD_GAL=OFF should not need any new libraries and should come out as a standard version of Kicad Currently most of items in pcbnew can be displayed using OpenGL (to be done are DIMENSIONS and MARKERS). More details about GAL can be found in: http://www.ohwr.org/attachments/1884/view-spec.pdf
2013-04-02 06:54:03 +00:00
aEvent.Skip();
Introduction of Graphics Abstraction Layer based rendering for pcbnew. New classes: - VIEW - represents view that is seen by user, takes care of layer ordering & visibility and how it is displayed (which location, how much zoomed, etc.) - VIEW_ITEM - Base class for every item that can be displayed on VIEW (the biggest change is that now it may be necessary to override ViewBBox & ViewGetLayers method for derived classes). - EDA_DRAW_PANEL_GAL - Inherits after EDA_DRAW_PANEL, displays VIEW output, right now it is not editable (in opposite to usual EDA_DRAW_PANEL). - GAL/OPENGL_GAL/CAIRO_GAL - Base Graphics Abstraction Layer class + two different flavours (Cairo is not fully supported yet), that offers methods to draw primitives using different libraries. - WX_VIEW_CONTROLS - Controller for VIEW, handles user events, allows zooming, panning, etc. - PAINTER/PCB_PAINTER - Classes that uses GAL interface to draw items (as you may have already guessed - PCB_PAINTER is a class for drawing PCB specific object, PAINTER is an abstract class). Its methods are invoked by VIEW, when an item has to be drawn. To display a new type of item - you need to implement draw(ITEM_TYPE*) method that draws it using GAL methods. - STROKE_FONT - Implements stroke font drawing using GAL methods. Most important changes to Kicad original code: * EDA_ITEM now inherits from VIEW_ITEM, which is a base class for all drawable objects. * EDA_DRAW_FRAME contains both usual EDA_DRAW_PANEL and new EDA_DRAW_PANEL_GAL, that can be switched anytime. * There are some new layers for displaying multilayer pads, vias & pads holes (these are not shown yet on the right sidebar in pcbnew) * Display order of layers is different than in previous versions (if you are curious - you may check m_galLayerOrder@pcbnew/basepcbframe.cpp). Preserving usual order would result in not very natural display, such as showing silkscreen texts on the bottom. * Introduced new hotkey (Alt+F12) and new menu option (View->Switch canvas) for switching canvas during runtime. * Some of classes (mostly derived from BOARD_ITEM) now includes ViewBBox & ViewGetLayers methods. * Removed tools/class_painter.h, as now it is extended and included in source code. Build changes: * GAL-based rendering option is turned on by a new compilation CMake option KICAD_GAL. * When compiling with CMake option KICAD_GAL=ON, GLEW and Cairo libraries are required. * GAL-related code is compiled into a static library (common/libgal). * Build with KICAD_GAL=OFF should not need any new libraries and should come out as a standard version of Kicad Currently most of items in pcbnew can be displayed using OpenGL (to be done are DIMENSIONS and MARKERS). More details about GAL can be found in: http://www.ohwr.org/attachments/1884/view-spec.pdf
2013-04-02 06:54:03 +00:00
}
2013-04-22 09:08:02 +00:00
void WX_VIEW_CONTROLS::onEnter( wxMouseEvent& aEvent )
2013-04-22 09:08:02 +00:00
{
// Avoid stealing focus from text controls
// This is particularly important for users using On-Screen-Keyboards
// They may move the mouse over the canvas to reach the keyboard
if( KIUI::IsInputControlFocused() )
{
return;
}
#if defined( _WIN32 )
// Win32 transmits mouse move and wheel events to all controls below the mouse regardless of focus
// Forcing the focus here will cause the EDA FRAMES to immediately become the top level active window
if( m_parentPanel->GetParent() != nullptr )
{
// this assumes the parent panel's parent is the eda window
if( GetForegroundWindow() == m_parentPanel->GetParent()->GetHWND() )
{
m_parentPanel->SetFocus();
}
}
#else
2013-04-22 09:08:02 +00:00
m_parentPanel->SetFocus();
#endif
2013-04-22 09:08:02 +00:00
}
2015-03-10 12:20:38 +00:00
void WX_VIEW_CONTROLS::onLeave( wxMouseEvent& aEvent )
{
if( m_settings.m_cursorCaptured )
2015-03-10 12:20:38 +00:00
{
bool warp = false;
int x = aEvent.GetX();
int y = aEvent.GetY();
wxSize parentSize = m_parentPanel->GetClientSize();
if( x < 0 )
{
x = 0;
warp = true;
}
else if( x >= parentSize.x )
{
x = parentSize.x - 1;
warp = true;
}
if( y < 0 )
{
y = 0;
warp = true;
}
else if( y >= parentSize.y )
{
y = parentSize.y - 1;
warp = true;
}
if( warp )
m_parentPanel->WarpPointer( x, y );
}
}
void WX_VIEW_CONTROLS::onTimer( wxTimerEvent& aEvent )
{
switch( m_state )
{
case AUTO_PANNING:
{
if( !m_settings.m_autoPanEnabled )
{
m_state = IDLE;
return;
}
if( !m_parentPanel->HasFocus() )
break;
double borderSize = std::min( m_settings.m_autoPanMargin * m_view->GetScreenPixelSize().x,
m_settings.m_autoPanMargin * m_view->GetScreenPixelSize().y );
VECTOR2D dir( m_panDirection );
float accel = 0.5f + ( m_settings.m_autoPanAcceleration / 5.0f );
if( dir.EuclideanNorm() > borderSize / 2 )
dir = dir.Resize( pow( borderSize, accel ) );
else if( dir.EuclideanNorm() > borderSize )
dir = dir.Resize( borderSize );
dir = m_view->ToWorld( dir, false );
m_view->SetCenter( m_view->GetCenter() + dir );
refreshMouse();
}
break;
case IDLE: // Just remove unnecessary warnings
case DRAG_PANNING:
case DRAG_ZOOMING:
break;
}
}
2015-05-18 11:48:10 +00:00
void WX_VIEW_CONTROLS::onScroll( wxScrollWinEvent& aEvent )
{
const double linePanDelta = 0.05;
const double pagePanDelta = 0.5;
int type = aEvent.GetEventType();
int dir = aEvent.GetOrientation();
if( type == wxEVT_SCROLLWIN_THUMBTRACK )
{
2018-08-03 12:00:05 +00:00
auto center = m_view->GetCenter();
const auto& boundary = m_view->GetBoundary();
// Flip scroll direction in flipped view
const double xstart = ( m_view->IsMirroredX() ?
boundary.GetRight() : boundary.GetLeft() );
const double xdelta = ( m_view->IsMirroredX() ? -1 : 1 );
if( dir == wxHORIZONTAL )
center.x = xstart + xdelta * ( aEvent.GetPosition() / m_scrollScale.x );
else
center.y = boundary.GetTop() + aEvent.GetPosition() / m_scrollScale.y;
m_view->SetCenter( center );
}
else
{
double dist = 0;
if( type == wxEVT_SCROLLWIN_PAGEUP )
dist = pagePanDelta;
else if( type == wxEVT_SCROLLWIN_PAGEDOWN )
dist = -pagePanDelta;
else if( type == wxEVT_SCROLLWIN_LINEUP )
dist = linePanDelta;
else if( type == wxEVT_SCROLLWIN_LINEDOWN )
dist = -linePanDelta;
2017-09-15 09:20:07 +00:00
else
{
wxASSERT( "Unhandled event type" );
return;
}
VECTOR2D scroll = m_view->ToWorld( m_view->GetScreenPixelSize(), false ) * dist;
double scrollX = 0.0;
double scrollY = 0.0;
2015-05-18 11:48:10 +00:00
if ( dir == wxHORIZONTAL )
scrollX = -scroll.x;
else
scrollY = -scroll.y;
VECTOR2D delta( scrollX, scrollY );
m_view->SetCenter( m_view->GetCenter() + delta );
}
2015-05-18 11:48:10 +00:00
m_parentPanel->Refresh();
}
void WX_VIEW_CONTROLS::SetGrabMouse( bool aEnabled )
{
if( aEnabled && !m_settings.m_grabMouse )
m_parentPanel->CaptureMouse();
else if( !aEnabled && m_settings.m_grabMouse )
m_parentPanel->ReleaseMouse();
2015-07-24 08:58:47 +00:00
VIEW_CONTROLS::SetGrabMouse( aEnabled );
}
VECTOR2D WX_VIEW_CONTROLS::GetMousePosition( bool aWorldCoordinates ) const
2013-09-16 14:46:02 +00:00
{
wxPoint msp = getMouseScreenPosition();
VECTOR2D screenPos( msp.x, msp.y );
2013-09-16 14:46:02 +00:00
return aWorldCoordinates ? m_view->ToWorld( screenPos ) : screenPos;
2013-09-16 14:46:02 +00:00
}
VECTOR2D WX_VIEW_CONTROLS::GetRawCursorPosition( bool aEnableSnapping ) const
{
GAL* gal = m_view->GetGAL();
if( aEnableSnapping && gal->GetGridSnapping() )
{
return gal->GetGridPoint( m_cursorPos );
}
else
{
return m_cursorPos;
}
}
2013-09-16 14:46:02 +00:00
VECTOR2D WX_VIEW_CONTROLS::GetCursorPosition( bool aEnableSnapping ) const
2014-02-13 19:23:28 +00:00
{
if( m_settings.m_forceCursorPosition )
2015-07-15 15:32:30 +00:00
{
return m_settings.m_forcedPosition;
2015-07-15 15:32:30 +00:00
}
2014-02-13 19:23:28 +00:00
else
{
return GetRawCursorPosition( aEnableSnapping );
2014-02-13 19:23:28 +00:00
}
}
void WX_VIEW_CONTROLS::SetCursorPosition( const VECTOR2D& aPosition, bool aWarpView,
bool aTriggeredByArrows, long aArrowCommand )
{
m_updateCursor = false;
if( aTriggeredByArrows )
{
m_settings.m_lastKeyboardCursorPositionValid = true;
m_settings.m_lastKeyboardCursorPosition = aPosition;
m_settings.m_lastKeyboardCursorCommand = aArrowCommand;
m_cursorWarped = false;
}
else
{
m_settings.m_lastKeyboardCursorPositionValid = false;
m_settings.m_lastKeyboardCursorPosition = { 0.0, 0.0 };
m_settings.m_lastKeyboardCursorCommand = 0;
m_cursorWarped = true;
}
WarpCursor( aPosition, true, aWarpView );
m_cursorPos = aPosition;
}
2018-01-18 09:09:43 +00:00
void WX_VIEW_CONTROLS::SetCrossHairCursorPosition( const VECTOR2D& aPosition, bool aWarpView = true )
{
m_updateCursor = false;
const VECTOR2I& screenSize = m_view->GetGAL()->GetScreenPixelSize();
BOX2I screen( VECTOR2I( 0, 0 ), screenSize );
VECTOR2D screenPos = m_view->ToScreen( aPosition );
2018-09-09 09:57:36 +00:00
if( aWarpView && !screen.Contains( screenPos ) )
m_view->SetCenter( aPosition );
m_cursorPos = aPosition;
}
2015-07-15 15:32:30 +00:00
void WX_VIEW_CONTROLS::WarpCursor( const VECTOR2D& aPosition, bool aWorldCoordinates,
bool aWarpView )
2015-07-15 15:32:30 +00:00
{
if( aWorldCoordinates )
{
const VECTOR2I& screenSize = m_view->GetGAL()->GetScreenPixelSize();
BOX2I screen( VECTOR2I( 0, 0 ), screenSize );
VECTOR2D screenPos = m_view->ToScreen( aPosition );
if( !screen.Contains( screenPos ) )
{
if( aWarpView )
{
m_view->SetCenter( aPosition );
m_parentPanel->WarpPointer( screenSize.x / 2, screenSize.y / 2 );
}
}
else
{
m_parentPanel->WarpPointer( screenPos.x, screenPos.y );
}
}
else
{
m_parentPanel->WarpPointer( aPosition.x, aPosition.y );
}
refreshMouse();
2015-07-15 15:32:30 +00:00
}
void WX_VIEW_CONTROLS::CenterOnCursor() const
{
const VECTOR2I& screenSize = m_view->GetGAL()->GetScreenPixelSize();
VECTOR2I screenCenter( screenSize / 2 );
if( GetMousePosition( false ) != screenCenter )
{
m_view->SetCenter( GetCursorPosition() );
m_parentPanel->WarpPointer( KiROUND( screenSize.x / 2 ), KiROUND( screenSize.y / 2 ) );
}
}
bool WX_VIEW_CONTROLS::handleAutoPanning( const wxMouseEvent& aEvent )
{
VECTOR2I p( aEvent.GetX(), aEvent.GetY() );
VECTOR2I pKey( m_view->ToScreen(m_settings.m_lastKeyboardCursorPosition ) );
if( m_cursorWarped || ( m_settings.m_lastKeyboardCursorPositionValid && p == pKey ) )
{
// last cursor move event came from keyboard cursor control. If auto-panning is enabled and
// the next position is inside the autopan zone, check if it really came from a mouse event, otherwise
// disable autopan temporarily. Also temporaly disable autopan if the cursor is in the autopan zone
// because the application warped the cursor.
m_cursorWarped = false;
return true;
}
m_cursorWarped = false;
// Compute areas where autopanning is active
int borderStart = std::min( m_settings.m_autoPanMargin * m_view->GetScreenPixelSize().x,
m_settings.m_autoPanMargin * m_view->GetScreenPixelSize().y );
borderStart = std::max( borderStart, 2 );
int borderEndX = m_view->GetScreenPixelSize().x - borderStart;
int borderEndY = m_view->GetScreenPixelSize().y - borderStart;
if( p.x < borderStart )
m_panDirection.x = -( borderStart - p.x );
else if( p.x > borderEndX )
m_panDirection.x = ( p.x - borderEndX );
2014-02-13 19:23:28 +00:00
else
m_panDirection.x = 0;
if( p.y < borderStart )
m_panDirection.y = -( borderStart - p.y );
else if( p.y > borderEndY )
m_panDirection.y = ( p.y - borderEndY );
2014-02-13 19:23:28 +00:00
else
m_panDirection.y = 0;
bool borderHit = ( m_panDirection.x != 0 || m_panDirection.y != 0 );
switch( m_state )
{
case AUTO_PANNING:
if( !borderHit )
{
m_panTimer.Stop();
m_state = IDLE;
return false;
}
return true;
break;
case IDLE:
if( borderHit )
{
m_state = AUTO_PANNING;
2016-05-02 13:56:11 +00:00
m_panTimer.Start( (int) ( 250.0 / 60.0 ) );
return true;
}
return false;
break;
case DRAG_PANNING:
case DRAG_ZOOMING:
return false;
}
wxASSERT_MSG( false, wxT( "This line should never be reached" ) );
return false; // Should not be reached, just avoid the compiler warnings..
}
2015-05-18 11:48:10 +00:00
void WX_VIEW_CONTROLS::refreshMouse()
{
// Notify tools that the cursor position has changed in the world coordinates
wxMouseEvent moveEvent( EVT_REFRESH_MOUSE );
wxPoint msp = getMouseScreenPosition();
moveEvent.SetX( msp.x );
moveEvent.SetY( msp.y );
// Set the modifiers state
moveEvent.SetControlDown( wxGetKeyState( WXK_CONTROL ) );
moveEvent.SetShiftDown( wxGetKeyState( WXK_SHIFT ) );
moveEvent.SetAltDown( wxGetKeyState( WXK_ALT ) );
m_cursorPos = m_view->ToWorld( VECTOR2D( msp.x, msp.y ) );
wxPostEvent( m_parentPanel, moveEvent );
}
wxPoint WX_VIEW_CONTROLS::getMouseScreenPosition() const
{
wxPoint msp = wxGetMousePosition();
m_parentPanel->ScreenToClient( &msp.x, &msp.y );
return msp;
}
2015-05-18 11:48:10 +00:00
void WX_VIEW_CONTROLS::UpdateScrollbars()
{
const BOX2D viewport = m_view->GetViewport();
2018-08-03 12:00:05 +00:00
const BOX2D& boundary = m_view->GetBoundary();
2015-05-18 11:48:10 +00:00
m_scrollScale.x = 2e3 / viewport.GetWidth(); // TODO it does not have to be updated so often
m_scrollScale.y = 2e3 / viewport.GetHeight();
VECTOR2I newScroll( ( viewport.Centre().x - boundary.GetLeft() ) * m_scrollScale.x,
( viewport.Centre().y - boundary.GetTop() ) * m_scrollScale.y );
2015-05-18 11:48:10 +00:00
// We add the width of the scroll bar thumb to the range because the scroll range is given by
// the full bar while the position is given by the left/top position of the thumb
VECTOR2I newRange( m_scrollScale.x * boundary.GetWidth() + m_parentPanel->GetScrollThumb( wxSB_HORIZONTAL ),
m_scrollScale.y * boundary.GetHeight() + m_parentPanel->GetScrollThumb( wxSB_VERTICAL ) );
// Flip scroll direction in flipped view
if( m_view->IsMirroredX() )
newScroll.x = ( boundary.GetRight() - viewport.Centre().x ) * m_scrollScale.x;
// Adjust scrollbars only if it is needed. Otherwise there are cases when canvas is continuously
// refreshed (Windows)
if( m_scrollPos != newScroll || newRange.x != m_parentPanel->GetScrollRange( wxSB_HORIZONTAL )
|| newRange.y != m_parentPanel->GetScrollRange( wxSB_VERTICAL ) )
{
m_parentPanel->SetScrollbars( 1, 1, newRange.x, newRange.y, newScroll.x, newScroll.y, true );
m_scrollPos = newScroll;
#if !defined( __APPLE__ ) && !defined( WIN32 )
// Trigger a mouse refresh to get the canvas update in GTK (re-draws the scrollbars).
2020-11-11 13:45:46 +00:00
// Note that this causes an infinite loop on OSX and Windows (in certain cases) as it generates a paint event.
refreshMouse();
#endif
}
2015-05-18 11:48:10 +00:00
}
void WX_VIEW_CONTROLS::ForceCursorPosition( bool aEnabled, const VECTOR2D& aPosition )
{
m_settings.m_forceCursorPosition = aEnabled;
m_settings.m_forcedPosition = aPosition;
}