fd9fd1df05
Careful of skipping non-flashed pads for performance: they might still have a hole.
2022-04-04 15:03:01 +01:00
65185f53a1
Rotate fp zones before comparing with library versions.
...
Also includes some performance fixes to not copy around triangulation
data when it's not needed.
Fixes https://gitlab.com/kicad/code/kicad/issues/10143
2022-03-14 15:53:24 +00:00
f6dac9eb13
Support text knockouts in non-copper zones.
2022-03-08 18:06:41 +00:00
23088e6e1a
Minor performance enhancements for zone filler.
...
Be smarter about not knocking out some classes of pads twice.
2022-03-05 20:32:08 +00:00
fed5bcbdf6
Improvements for pads/vias in zones which knockout other zones.
...
1) Drop tiny islands which might cause connection problems.
2) Cleanup some dead code in filler
3) Don't estabilish a connection to an island that is fully covered
by whatever its connecting to.
Fixes https://gitlab.com/kicad/code/kicad/issues/11036
2022-03-05 18:59:53 +00:00
878c4d2f6b
Must clear arcs before calling Clipper.
2022-03-05 18:59:53 +00:00
843a56c4e4
Implement two-staged zone priority: assigned priority followed by UUID.
2022-03-01 14:53:35 +00:00
e6c617b74d
Respect ERROR_OUTSIDE when inflating polygons.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10896
2022-02-21 15:19:46 +00:00
81bed9ab96
Add zone margin when subtracting other graphics and zones.
...
It was already added for pads and tracks, but not the other objects.
Fixes https://gitlab.com/kicad/code/kicad/issues/10896
2022-02-18 13:20:36 +00:00
b1bd8421e0
Performance: remove associated triangle sets when removing outline.
...
This saves us having to re-triangulate at the end of zone filling.
2022-02-16 17:00:54 +00:00
327ddad79f
Performance: get rid of rawPolys / finalPolys distinction.
...
(The final fractured polys are required, and we don't really ever use
the raw polys anyway, so they were removed.)
2022-02-16 15:33:12 +00:00
2172810600
Performance: better sharing of zone fills.
2022-02-15 19:19:03 +00:00
d8c4f2cb09
Performance improvements for zone filler.
2022-02-15 19:19:02 +00:00
3deaf902bb
Retire the V5 zone fill algorithm.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10578
2022-02-11 13:10:52 +00:00
7ccac79192
More wxString wide literals.
2022-02-05 21:29:34 +00:00
5739505aa3
TextBoxes for PCBNew.
2022-01-31 20:00:47 +00:00
aef665b1e2
PCB_TARGET: add missing TransformShapeWithClearanceToPolygon() method.
...
Fixes #10653
https://gitlab.com/kicad/code/kicad/issues/10653
2022-01-29 18:19:22 +01:00
4eac8d7c66
Remove unit-less angles from geometry lib APIs.
2022-01-20 21:10:04 +00:00
038db715a3
Move zone hatch orientation to EDA_ANGLE.
2022-01-19 00:34:03 +00:00
07013d00e1
More EDA_ANGLE.
2022-01-14 16:08:19 +00:00
d485eb2514
Move pads to EDA_ANGLE.
2022-01-14 16:08:18 +00:00
ac78d51b14
Teardrops: better dialog, and better code
2022-01-10 20:04:41 +01:00
53770fec68
Ensure thermal spoke widths are smaller than the pad size (fix a regression)
...
This is needed to create good thermal reliefs, and ensure the DRC about
thermal spoke count works.
Fixes #10246
https://gitlab.com/kicad/code/kicad/issues/10246
2022-01-07 16:38:27 +01:00
7fa451dc93
Thermal reliefs: fix incorrect calculation
...
commit eeef655
2022-01-06 09:00:29 +01:00
eeef65533a
Pad Thermal Reliefs: fix spoke incorrect angle for rotated pads.
...
Fixes #10251
https://gitlab.com/kicad/code/kicad/issues/10251
2022-01-05 11:19:43 +01:00
ea613cf448
Another batch of point changes
2022-01-01 13:17:12 -05:00
c4c56de708
Neurotically update position wxPoint usages
2022-01-01 11:55:51 -05:00
3aa6d73770
Allow min/max/opt to come from different rules.
2021-12-24 12:36:37 +00:00
32721755bf
Hook up zone-pad connections to custom rules.
...
ADDED zone_connection constraint.
ADDED thermal_relief_gap and thermal_spoke_width constraints.
ADDED angle override for thermal relief spokes in Pad Properties.
Fixes https://gitlab.com/kicad/code/kicad/issues/4067
2021-12-23 22:30:26 +00:00
77239591c0
Don't commit zone refill if there were no changes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10085
2021-12-23 16:54:03 +00:00
401de24274
Recalculate ratsnest after zone fill
...
Push the mutex down into the ZONE::Fill() routine and set the
connectivity update to run after zone fills. The connectivity update
cannot run while the mutex is locked for zone fills.
Fixes https://gitlab.com/kicad/code/kicad/issues/9993
2021-12-14 13:37:15 -08:00
341b0a5652
Don't depend on a keepout zone having no priority.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7776
2021-10-26 17:20:09 +01:00
b1f17dc927
Don't let the polygon routines collapse on a zero line width.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9418
2021-10-20 12:29:07 +01:00
f606679164
Proper numeric sorting for intersheet refs.
...
Also expunges the horrifically named std::remove and std::remove_if
(neither of which remove anything).
2021-10-01 18:29:21 +01:00
41619ebbe2
Decouple PROGRESS_REPORTER interface from implementations.
2021-08-14 21:05:49 +01:00
a208dac8d8
Convert hole clearance tests from NPTH holes to all holes.
2021-08-09 22:26:00 +01:00
6a9a177fa3
Remove zone filler arc collision workaround
2021-08-05 17:45:12 +01:00
0446d35f0d
Fix source comment/doc typos (follow-up)
...
Found via `codespell -q 3 -S *.po,./thirdparty -L aactual,acount,aline,alocation,alog,anormal,anumber,aother,apoints,aparent,aray,dout,einstance,modul,ot,overide,serie,te,,tesselate,tesselator,tht`
2021-07-13 10:48:17 +00:00
17737af130
Fix some issues related to SHAPE_ARC:
...
- Some are related to shape errors when the allowed error to approximate circle
by segment is large and arc radius small.
- fix the actual error used in ConvertToPolyline().
- Use SHAPE_ARC::DefaultAccuracyForPCB() instead of a fixed value as extra margin
in zones. It should not change something, because it is also a fixed value
(5 micrometers), but it is not a magic number.
-TransformArcToPolygon() fix some issues and add a new algo, based on the arc actual
outline shape (initial algo is still available in code, just in case).
2021-06-30 13:33:49 +02:00
81fc710a5d
Use consistent terminology.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8681
2021-06-26 10:11:41 +01:00
83b549741d
PCB_ARCS in zones: increase clearance to avoid DRC issues. This is a workaround,
...
but arcs in tracks are still not fully fixed.
The clearance is increased by only 4 microns, that should not create issues.
2021-06-25 19:45:32 +02:00
096e342386
Prefix TRACK, ARC and VIA.
2021-06-11 22:07:02 +01:00
f968fc8719
Fix source comment / documentation typos
2021-06-09 19:32:58 +00:00
10e60acf34
Clean up including of board_design_settings.h
2021-06-06 15:03:42 -04:00
03cf2b517f
Enum class PAD_ATTR_T
...
Renamed such that python stays the same
2021-05-01 10:51:54 -04:00
b243c2280d
enum class PAD_SHAPE_T
2021-05-01 08:22:35 -04:00
eb85836234
Make sure we have footprint courtyards before depending on DRC rules.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8291
2021-04-25 12:45:06 +01:00
fe6cc0c3d8
Spokes are from center of pad, not from hole (ie: pad position).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8195
2021-04-14 11:34:26 +01:00
6272b48481
Make sure layer gets passed in to rules evaluation.
2021-02-08 14:53:49 +00:00
e26c912b86
Don't apply electrical clearance to non-copper zones.
...
Also removes a very old (and somewhat confusing) comment.
Fixes https://gitlab.com/kicad/code/kicad/issues/7404
2021-02-03 11:56:43 +00:00
Jeff Young
jean-pierre charras
Marek Roszko
Seth Hillbrand
Roberto Fernandez Bautista
luz paz
luz paz