* Fix grid select box update bug on context menu.
* Fix via size and track width select box update bugs.
* Fix layer pair indicator button update bug.
* Fix auto track width tool bar control enable bug.
* Fix via size and track width select status bug in context menu.
* Fix layer select box and layer control widget select bug when current
layer is removed.
* Add virtual function to notify objects derived from EDA_DRAW_FRAME that
the units setting has changed.
* Coding policy class naming fixes.
* fix incorrect bounding box size calculation of schematic components.
* fix incorrect bounding box position and size used when schematic components are not found in lib (dummy lib componen used).
Pcbnew:
* Fix issues in block selection for arcs in modedit. Minor code cleaning.
CopyToClipboard: fix incorrect call to PrintPage (bad parameters)
* Make EDA_DRAW_FRAME current tool ID member variable private.
* Added global no tool selected ID to replace application specific no
tool selected IDs.
* Change SetToolID to prevent setting the tool ID to anything less than
the new global no tool selected ID and assert on debug builds.
* Change command and update user interface command event handlers to use
new global no tool selected ID.
* Fixed schematic library editor add pin hot key handler.
* CVPcb now uses wxUpdateUIEvent instead of set toolbars.
* Removed duplicate event handlers in CVPcb that were factored into
EDA_DRAW_FRAME.
* Fix definition of GeneralControle() in CVPcb that prevented it from being
called.
* Remove rarely used and scary refresh code GeneralControle() method in all
main frame windows.
* Factor zoom menu and tool bar command IDs down to EDA_DRAW_FRAME.
* Old control state handling code completely removed in all applications.
* Factor common control state handlers into EDA_DRAW_FRAME.
* Replaced EDA_ITEM test for newness with IsNew() method.
* Factor vertical right toolbar command handlers out of giant edit command
switch statement in EESchema and PCBNew.
* Rename all member variables and methods that reference the cross hair
code in draw panel object from cursor to cross hair to eliminate confusion
between the two concepts.
* Rename cursor capture call backs in draw panel object to improve code
readability.
* Create helper class for turning off the cross hair while drawing.
* Remove redundant block clear code.
* Remove redundant mouse capture call back reset code when end capture
call back is called.
* Remove unused function definitions in base draw frame object.
* Lots of minor coding policy and doxygen comment fixes.
* Fix rendering bug in GerbView caused by wxDC scaling change caused by
setting the wxDC clipping region.
* Eliminate the need to have optional background erasing as the change
above fixed that problem as well.
* Default cursor handling improvements.
* Remove base screen methods from draw frame object and correct current
screen methods in derived objects.
* Move restore old wires function code into schematic screen object.
* Make add junction method use current screen position instead of store
position.
* Move poly line ghosting function into the delete current segment method
as that was the only place is was being used.
* Add method to base schematic object of testing if object has a label
that can be incremented.
* Simplified the schematic hierarchy traversing code.
* PCBNew Doxygen warning fixes.
* Changed managed cursor callback definition to include the current
cursor drawing position.
* Modified all managed cursor callbacks to match new definition.
* Added snap to grid option to base drawing frame object.
* Changed add no connect managed cursor callback to use new position
parameter instead of the stored one.
* Lots of coding policy fixes.
* Remove unused member variable m_SizeVisu from base screen object.
* Move nearest grid position code into base screen object.
* Add get cursor position method to base screen object.
* Add position parameter to OnHotKey method in base draw frame and all
derived objects.
* Pass logical position on left mouse button click and double click
events instead of device position.
* Pass logical position to on right mouse button click instead of device
position.
* Use logical event position parameter for locating items in EESchema
instead of the stored position.
* Remove unused position parameter when displaying component edit dialog
in EESchema.
* Comment out debugging macro in eeschema/template_field_names.cpp that was
preventing debug builds using wxWidgets 2.8.x.
* macros.h now has TO_UTF8() and FROM_UTF8() which are working converters
to and from UTF-8 encoding for any wxWidgets build mode. We can switch to
them at any time. I am using them now for specctra conversions and
elsewhere where I wanted gauranteed UTF8 encoding.
* added OUTPUTFORMATTER::Quoted( const wxString& ) to simplify converting
to UTF8 encoded s-expression atoms. The recommended technique is now simply:
out->Quoted( wxString ).c_str()
* Use wxDC to calculate screen center position.
* Minor grid drawing optimization.
* Remove an unnecessary use of global variable ActiveScreen.
* Doxygen warning fixes.
* Remove all occurrences if #ifdef USE_WX_ZOOM and all associated code within
the #else/#endif block ( old zoom code ).
* Removed the build option for USE_WX_ZOOM from CMakeList.txt and config.h.in.
* Removed all scaling code in base screen object.
* Fixed buffered paint and buffered client DC on Windows. Buffering works
properly on Linux and Windows.
* Modified kicad_device_context.h to automatically uses buffering on platforms
where double buffering is supported natively.
* Remove all of the scaled versions of the drawing functions in gr_basic.cpp
and any support code.
* Removed all traces of ActiveScreen global variable from eeschema and
gerbview.
* Renamed Recadre_Trace to RedrawScreen in draw frame object.
* Renamed PostDirtyRect to RefreshDrawingRect in draw panel object.
* Lots of code cleaning an Doxygen comment improvements.
* DSNLEXER::NextTok() now uses two separate modes to parse quoted strings.
This gives us the freedom to control our own destiny separate from the
constraints put on us by the Specctra DSN spec.
* Added Documentation/s-expressions.txt to explain all this.
* Enhanced our quoting protocol by moving away from doubling up double quotes
to a C line escape mechanism.
* Now support multi-line strings, which when properly escaped, can still be
read in as a token originating on a single line.
This was due to a duplicate constants ( with sligtly different values) used to select items in some seach functions that broke filtering. Old definitions removed.
* Move schematic wire and bus break code into schematic screen object.
* Move schematic test for dangling ends into schematic screen object.
* Remove left over debugging output in schematic screen object.
* Remove unused file eeschema/cleanup.cpp.
* Fix bug in schematic line object hit test algorithm.
* Fix a string concatenation compile error added in r2752.
* Rename class WinEDA_BasicFrame to EDA_BASE_FRAME.
* Rename class WinEDA_DrawFrame to EDA_DRAW_FRAME.
* Rename class WinEDA_DrawPanel to EDA_DRAW_PANEL.
* Encapsulate file name member of base screen object.
* Encapsulate associated screen member of schematic sheet object.
* Create add screen method to schematic sheet object to simplify setting
the associated screen.
* Move the change file name code in the schematic sheet object to the edit
sheet method in the schematic editor frame object to eliminate message
dialogs.
* Improve reference counting in schematic screen object.
* Add helper type definitions for changing schematic object storage to C++
containers.
* TokenList2DsnLexer.cmake now supports comments, which start with a leading
# character, and may be either on their own line or on a line after a token.
* DSNLEXER::PopReader() now pops even the last LINE_READER* and returns it.
++pcbnew:
* SPECCTRA_DB now inherits from new class SPECCTRA_LEXER, which led to a great
deal of simplification and code factoring.
* Moved specctra keywords into specctra.keywords.
Very minor enhancement in module edition dialogs.
Fix a minor bug in design rules editor: in Global Rules Edition: drill values > via diameter not checked
and the first item (track or via) in list was not checked (explains Bug 702177, that is not really a bug)
Pcbnew: fix that prevents loading modules from libraries (footprint name not identified in lib)
Module Editor: Try to fix incorrect printing. Fixed now only for scale 1. Nor working for other scales. (Work in progress).
Gerbview: Known bug: printing not working.
VRML export: Fix incorrect export of 3D shapes rotations when the 3D shape was rotated.
* Schematic reference object now completely encapsulated.
* Schematic reference list object refactoring complete.
* Make OK default button in PCBNew block operation dialog.
* Added the basic structure to the Sweet parser in sch_part.cpp.
* Got inheritence working off of the 'extends' keyword and PART::inherit()
* Tossed the units support out of sweet.keywords, since we agreed to go dimensionless.
++richio:
* Added the problemInputLine support to PARSE_ERROR, so UI can show the
offending line of bytes. Yes bytes, not even guaranteed to be characters.
* Deleted kicad_exceptions, because it required the big #include <wx/wx.h> and
that was slowing down compiling. Moved that stuff back into richio.h where
it came from.
* Enhanced IO_ERROR to format an errorText.
* Added THROW_IO_ERROR() and THROW_PARSE_ERROR() macros to capture the
the call site of the thrower. If you have problems compiling, it is probably
due to the definition of __LOC__ in richio.h. Some compilers may not support
__func__ in C++ yet. Find a macro that identifies your compiler, and we can
work out something in the #define of __LOC__.
Rename EDA_Rect::Inside to EDA_Rect::Contains ( EDA_Rect::Inside( const EDA_Rect& aRect ) was very ambiguous )
Fix some Doxygen warnings and erroneous comments; Add comments.
soldermask. Nevertheless, it would be nice to have proper gerbers to
begin with, i.e., gerbers with no silkscreen in soldermaskless areas.
Of course, most of the problem can be taken care of by drawing the
footprints properly. However, sometimes the silkscreen of one
footprint ends up on the pads of another one (think components under a
so-dimm card, for example). The attached patch adds an option to
subtract the soldermask from the silkscreen when doing gerber output.
marco
pcbnew and directs gerber/hpgl etc. output into that directory.
There's a browse button that opens a dialog for browsing. If the
directory does not exist, it is created. Tested in linux, not in
windows. Wxwidgets methods are used for file (name) manipulations, so
things are probably ok in windows, too.
marco
jean-pierre charras
Marco Mattila
Dick Hollenbeck
Wayne Stambaugh
Andrey Fedorushkov
Marco Serantoni