Commit Graph

165 Commits

Author SHA1 Message Date
Jeff Young 091f769106 Add infobar error message for Autoplace when board not defined.
Fixes https://gitlab.com/kicad/code/kicad/issues/5425
2020-08-31 12:54:45 +01:00
Jeff Young d0479eb92c Fix signed/unsigned comparison that was destined to fail. 2020-08-31 12:53:15 +01:00
Jeff Young 3f1f89405e Removed unused datastructure in auto-router.
May (or may not) have some effect on #5424.

Fixes https://gitlab.com/kicad/code/kicad/issues/5424
2020-08-30 20:22:53 +01:00
Wayne Stambaugh ede39780e2 Remove all debugging output that cannot be disabled.
The use of printf, wxLogDebug, and std::err/std::out causes excessive
debugging output which makes finding specific debugging messages more
difficult than it needs to be.

There is still some debugging output in test code that really needs to
be moved into a unit test.

Add debugging output section to the coding policy regarding debugging
output.
2020-08-18 10:17:36 -04:00
Jeff Young e5b50d90a7 Update DRC rules to new layer and disallow grammars.
Also adds support for hooking rules up to named zones.

Fixes https://gitlab.com/kicad/code/kicad/issues/2041
2020-08-07 21:49:36 +01:00
Seth Hillbrand 8c57821e9b pcbnew: Move ratsnest items to separate folder 2020-06-16 11:15:14 -07:00
Jeff Young aeed8e6e2c Finish implementation of DRAWSEGMENT::C_RECT.
It's currently only supported in the Footprint Editor.  It could be
easily added to the board editor (all the code is there), but the board
editor is a little short on room in the drawing tools toolbar.
2020-06-15 20:51:31 +01:00
jean-pierre charras 2a026bd882 spread_footprints.cpp: try to avoid integer overflow when spreading footprints.
In rare cases (one known case) sizes of areas used as container when spreading
footprints can become negative, thus hanging pcbnew.
Happens if many footprints are very big (say 80cm).

Now if there is no room to place footprints, some are stacked.
2020-02-29 17:25:52 +01:00
Jeff Young 129042f8a6 Convert timestamps to UUIDs. 2020-02-20 21:29:52 +00:00
Ian McInerney 25b3cce474 Fix build error and cleanup overzealous refactor changes 2020-02-14 00:56:41 +00:00
Jeff Young 2017389f2d Pinning for library trees in FPEditor and SymbolEditor.
Fixes https://gitlab.com/kicad/code/kicad/issues/2288
2020-02-14 00:10:40 +00:00
Ian McInerney 00e58cd974 Fix unintialized values (from coverity scan) 2020-01-12 13:00:42 +00:00
Seth Hillbrand 7c28c3838a Comment-only changes
Makes class comments conform to coding standards
2020-01-10 16:43:01 -08:00
Ian McInerney 13b6028e1b Refactor all math into a new kimath library
* Split up the thirdparty code into the thirdparty folder (#3637)
* Create a new kimath static library containing all the math functions

This is part of cleaning the build system for #1906.
2020-01-07 17:12:59 +00:00
Ian McInerney 5d46e721e5 pcbnew: Cleanup includes of pcbnew_id.h
* Remove unused IDs from the enum
* Remove the include statements from files that no longer need it
2020-01-03 15:39:05 +00:00
Seth Hillbrand a2edf9c442 Unified update to C++14 std::make_unique
This update replaces the existing uses of unique pointer creation with
the C++14 std::make_unique call that provides proper memory release in
event of an exception.
2019-12-05 10:43:55 -08:00
jean-pierre charras e04436b138 Cleaning code: remove dead code in spread_footprints.cpp. 2019-08-10 20:29:54 +02:00
Jeff Young e6d5110ccf Implement I18N for ACTIONs.
It's a bit of a hack because they're statically initialized and
so we can't make use of the _() macro.  We do still want it in the
code, however, because the string harvesting is based off of it.

Fixes: lp:1833000
* https://bugs.launchpad.net/kicad/+bug/1833000
2019-06-17 10:45:23 +01:00
Jeff Young 8f84c3ec4f Grid rid of GetCanvas/GetGalCanvas distinction now that there's only gal. 2019-06-13 19:58:37 +01:00
Jeff Young 5e49517781 Move hotkeys to ACTION architecture. 2019-06-10 23:46:00 +01:00
Jeff Young c2662b0e11 Retire EDA_DRAW_PANEL and legacy_wx/EDA_DRAW_FRAME. 2019-05-31 21:55:30 +01:00
Jeff Young d6e9bdf07b Convert remaining legacy drawing code to print code. 2019-05-31 21:54:22 +01:00
Jeff Young 1e9da7f57b Remove CurItem() architecture and legacy routers and drawing code. 2019-05-29 00:26:30 +01:00
Jeff Young 9d9745b555 Remove more legacy editing code. 2019-05-27 18:47:20 +01:00
jean-pierre charras 4ac20d7ab1 menubar_pcb_editor.cpp: add missing icons. 2019-05-20 10:05:33 +02:00
Jeff Young fbb807f3bb Move some more menu & toolbar items to modern toolset. 2019-05-16 19:57:06 +01:00
Jeff Young f602ccd814 Insert EE_TOOL_BASE under SchEdit and LibEdit tools, and fix errant rename scope which clobbered PCBNew's PICKER_TOOL. 2019-05-12 13:47:08 +01:00
jean-pierre charras ec59361f75 Fix a few coverity errors 2019-02-16 14:09:21 +01:00
jean-pierre charras 6a0319f6b7 autoplacer: minor fixes. 2018-12-16 10:43:47 +01:00
jean-pierre charras ed28b7e29b Autorouter rework: remove outdated or dead code, add comments and display the footprints as soon as a footprint is placed 2018-12-15 17:50:42 +01:00
jean-pierre charras 4013f6424d Pcbnew, autoplacer: display more activity during footprint placement 2018-12-10 10:33:56 +01:00
Seth Hillbrand 4460313104 pcbnew: Separating connectivity to subdir 2018-10-12 16:31:09 -07:00
Jeff Young a53b163456 Use resize() instead of reserve()/fill() so hardeners don't choke.
Fixes: lp:1789283
* https://bugs.launchpad.net/kicad/+bug/1789283
2018-09-17 18:01:08 +01:00
Jeff Young 0f9ded9563 Space out placed footprints with some padding.
Fixes: lp:1788917
* https://bugs.launchpad.net/kicad/+bug/1788917
2018-09-14 10:21:45 +01:00
Tomasz Wlostowski 61fb3f6d0f pcbnew: bring back the autoplacer tool to GAL 2018-08-24 14:42:49 +02:00
Tomasz Wlostowski 33946ea92f pcbnew: renaming of autorouter/autoplacer files 2018-08-24 14:42:49 +02:00
Jeff Young 43e99e6df0 Inflate footprint bounding box to include texts.
This makes zoom automatique work much better in the footprint
editor, and should improve other things which probably assumed
the bounding box included everything (such as refresh code).

Callers which still want just the module outline should call
GetFootprintRect() instead of GetBoundingBox().
2018-08-11 17:14:27 +01:00
jean-pierre charras 8552f3fedf fix code after renaming files 2018-01-29 22:00:44 +01:00
Tomasz Włostowski 81d1e17f02 refactoring: renamed pcbstruct.h to pcb_display_options.h, DISPLAY_OPTIONS->PCB_DISPLAY_OPTIONS 2017-11-03 20:02:06 +01:00
Tomasz Włostowski 32185ddcd3 Multiple improvements concerning colors, configuration handling and legacy features in pcbnew:
- support for background color setting
    - removed several global config settings (such as g_Drc_On)
    - wrapped most of global config settings in PCB_GENERAL_SETTINGS class
    - reorganized PCB general options dialog to clearly mark which options concern only the legacy canvas
    - new GAL feature for legacy users: double-click (or E) to change track width available as an option.

Fixes: lp:1530543
* https://bugs.launchpad.net/kicad/+bug/1530543

Fixes: lp:1707145
* https://bugs.launchpad.net/kicad/+bug/1707145
2017-08-04 16:06:57 +02:00
Tomasz Włostowski 08314082db Hide DLISTs behind iterators, first step towards refactoring the storage model 2017-06-23 11:12:36 +02:00
Jon Evans 3ec28e2acf Refactor layer enumerations to all live in the same place 2017-03-30 16:01:48 -04:00
Maciej Suminski 389c7b2bbc Added AUTOROUTER_CONTEXT to keep objects used by autorouter
The main reason is to keep cached board bounding box and limit repeating
parameters in functions used by the autorouter.
2017-03-03 13:28:19 +01:00
Maciej Suminski a073a90c45 Remove BOARD::SetBoundingBox()
Bounding box should be computed basing on the items belonging to the
board.
2017-03-03 13:28:19 +01:00
Jon Evans 88f7c55d95 Move ZoomFitScreen and ZoomPreset from PCBNEW_CONTROL to COMMON_TOOLS
BOARD::GetBoundingBox() now directly calls BOARD::ComputeBoundingBox()
and there is a new method BOARD::GetBoardEdgesBoundingBox() used for
call sites that needed to use ComputeBoundingBox( true ) in the past.

This allows COMMON_TOOLS to implement ZoomFitScreen without knowledge
of the BOARD class.
2017-03-03 13:28:19 +01:00
Maciej Suminski d7bf44eee0 Removed a few more headers from base_struct.h 2017-02-22 17:54:01 +01:00
Maciej Suminski 0dc88bb4cf Changed COLOR4D defines to static consts 2017-02-22 17:35:00 +01:00
Jon Evans a52250a91e Change from EDA_COLOR_T to COLOR4D globally; arbitrary color support
eeschema now supports arbitrary colors for all object types, and
pcbnew does in GAL canvas.  When switching from GAL to legacy canvas,
pcbnew will convert colors to the nearest legacy color.
2017-02-22 17:35:00 +01:00
Dick Hollenbeck 0c459ced97 EDA_TEXT object refactor.
Make all EDA_TEXT data private and rename accessors to avoid function
name collisions in derived classes.

Overload EDA_TEXT's SetTextAngle() and SetEffects() in TEXTE_PCB.

Add support for preserving Reference text position, size, orientation
during a netlist import into a BOARD, as well as the one off footprint
update dialog.
2017-01-25 08:03:32 -05:00
jean-pierre charras 89f9b7df5c Pcbnew: when update PCB from schematic, spread footprints also in legacy mode. Remove also one useless undo command level after update. 2016-10-25 15:34:59 +02:00
jean-pierre charras 34469c1d9c Pcbnew, legacy mode: used spread_footprints to place new footprints after reading a netlist, like in GAL mode.
However they are put inside the "best" area, and not put inside a moving block, like in GAL, due to limitations of legacy mode.
2016-07-11 09:48:51 +02:00
Jon Neal 1293d04a7a Fix a bunch of misspellings of length. 2016-07-10 23:09:18 -04:00
Simon Richter 1b2fd6a382 Replace BOOST_FOREACH with C++11 range based for. 2016-06-29 16:07:55 -04:00
jean-pierre charras a4658ab6be Fix a few compil warnings (not used vars, shadowed local vars) 2016-06-01 14:22:05 +02:00
Simon Richter 128459470a Clean up truncation of constant
In the autorouter code, the value 0x80 is assigned to MATRIX_CELL, which is
an overflow for a signed 8-bit type. As this type is used as a bit mask,
there is no point in having a sign bit anyway.
2016-01-15 22:24:17 -05:00
Simon Richter f674942e27 Remove superfluous include in the middle of source file 2016-01-15 22:20:32 -05:00
Jon Neal f309eaab00 Pcbnew: spread and pick up new footprints when loaded. 2016-01-10 16:24:13 -05:00
jean-pierre charras 4fc230b773 Rework on Enum PAD_SHAPE_T, PAD_DRILL_SHAPE_T and PAD_ATTR_T (see rev 6008) : the new and better names are now used in Kicad code and existing python scripts.
PAD_SHAPE_T  and PAD_ATTR_T still have a double definition (new names and old names) to be sure python scripts are nor broken by the change.
 PAD_DRILL_SHAPE_T does not  have a double definition, because it is unlikely oblong holes are used in python scripts.
Double definitions will be removed in the (next) future.
2015-08-23 21:40:33 +02:00
unknown 71b3125d8e Cleanup: remove unnecessary macros EXCHG and NEGATE. add MIRROR macro. 2015-06-26 15:41:56 +02:00
jean-pierre charras 0f7e358030 3D viewer: fix a bug introduced in rev 5579s. Remove a few useless wxBusyCursor. Minor other fixes. 2015-04-08 14:50:36 +02:00
jean-pierre charras bbbb84e6c2 Fix a few minor coverity warnings.
Fix minor 3D viewer issues (includling change number of segments and its optimization to draw pad holes.)
Fix Bug #1439132 (track and via list on toolbar not always refresh after loading a board).
Remove useless tool in Modedit.
2015-04-02 13:18:19 +02:00
jean-pierre charras a550ff84db Fix some coverity and cppcheck warnings (most are very minor issues: not initialized members and initialized but not used variables) 2015-03-04 10:26:00 +01:00
jean-pierre charras d6c6b4debb Fix some coverity warnings (mainly not initialized vars). 2015-02-27 15:33:13 +01:00
Wayne Stambaugh 4c6ca81f2c More Coverity scan error fixes. 2015-02-22 16:25:29 -05:00
jean-pierre charras 79e2a41469 Pcbnew: Fix potential bug in DRAG_SEGM_PICKER (a variable type bool was used as int. type is now int). Minor code cleanup. 2015-01-19 09:23:10 +01:00
jean-pierre charras 9cfb97d8b4 Add hight contrast option in Modedit. In hight contrast mode, solder masks and solder paste are shown.
this option was possible only by modifying the way display options are managed.
before these changes, display options were a global DISPLAY_OPTIONS class instance.
Now each EDA_DRAW_FRAME(and derivated classes)  includes its own DISPLAY_OPTIONS class instance.
As a consequence, some duplicate display option variables in these classes have been removed, because there were just duplicate variables of the  DISPLAY_OPTIONS class instance.
2015-01-10 11:27:49 +01:00
Marco Ciampa 40f044bd8d More renaming instances of module to footprint for consistency. 2014-11-02 07:44:57 -05:00
Marco Ciampa 5d306bb244 Rename instances of module to footprint for consistency. 2014-10-30 11:37:46 -04:00
Wayne Stambaugh 99f30c9d38 Road map and Doxygen work.
* Remove obsolete settings from Doxygen configuration file.
* Fix some Doxygen warnings.
* Add the board edge segment snapping to developers road map.
* Fix some coding style issues in CMakeLists.txt
2014-10-05 21:18:24 -04:00
jean-pierre charras 5a38d2b657 Rework on env. variable KISYS3DMOD. Until now, was used in different files using different ways, so no consistency between files.
code cleanup.
2014-08-24 09:05:07 +02:00
Dick Hollenbeck 4578ea8b9e 1) Add 32 Cu Layers.
2) Change from legacy Cu stack to counting down from top=(F_Cu or 0).
   The old Cu stack required knowing the count of Cu layers to make
   sense of the layer number when converting to many exported file types.
   The new Cu stack is more commonly used, although ours still gives
   B_Cu a fixed number.
3) Introduce class LSET and enum LAYER_ID.
4) Change *.kicad_pcb file format version to 4 from 3.
5) Change fixed names Inner1_Cu-Inner14_Cu to In1_Cu-In30_Cu and their
   meanings are typically flipped.
6) Moved the #define LAYER_N_* stuff into legacy_plugin.cpp where they
   can die a quiet death, and switch to enum LAYER_ID symbols throughout.
7) Removed the LEGACY_PLUGIN::Save() and FootprintSave() functions.
   You will need to convert to the format immediately, *.kicad_pcb and
   *.kicad_mod (=pretty) since legacy format was never going to know
   about 32 Cu layers and additional technical layers and the reversed Cu
   stack.
2014-06-24 11:17:18 -05:00
Maciej Suminski f31f92e45e Fixes the bug that causes pcbnew crash, when there are multiple net classes and the plot dialog was opened.
Changed NETCLASS* to boost::shared_ptr<NETCLASS>.
2014-05-20 11:29:37 +02:00
Maciej Suminski 4fcaf4c586 Minor BOARD_DESIGN_SETTINGS refactoring.
Removed SetCurrentClassName() (it was not used anywhere and less safe than SetCurrentClass()).
Added BOARD_DESIGN_SETTIGNS::GetDefault() to make some pieces of shorter and clearer.
2014-05-15 10:51:08 +02:00
Maciej Suminski d9eb15c9fa Moved NETCLASSES to BOARD_DESIGN_SETTINGS.
Most of the changes are just adding GetDesignSettings() before every occurence of m_NetClasses.
More complex changes:
class_netclass.cpp - NETCLASS does not store the pointer to the parent BOARD anymore. Added function SetParams( BOARD_DESIGN_SETTINGS& ).
class_netclass.h - Removed GetTrackMinWidth(), GetViaMinDiameter(), GetViaMinDrill(), GetuViaMinDiameter(), GetuViaMinDrill() as they were refering to BOARD_DESIGN_SETTINGS anyway (they are not net class specific).
kicad_plugin.cpp - filters out empty nets (that are anyway not saved) when storing net class information. Previously it was done in NETCLASS::Format() function.
2014-05-13 11:22:51 +02:00
Maciej Suminski cd8aaee160 Moved most of the board design rules related fields & methods to BOARD_DESIGN_SETTINGS class. 2014-05-13 11:22:51 +02:00
Lorenzo Marcantonio c2af94ac03 Reworked the endpoint designator constants FLG_BEGIN and FLG_END in a
ENDPOINT_T enum type
2014-04-25 19:13:33 +02:00
Lorenzo Marcantonio 3f2c0e1a8d TRACK/SEGVIA cleanup
- SEGVIA becomes VIA
- Drill size moved from TRACK to VIA
- Removed shape from TRACK, becomes ViaType in VIA
- GetTrace becomes GetTrack, for uniformity
- Some minor constification and typo fixes
2014-04-25 08:00:04 +02:00
Dick Hollenbeck 6bfff89fe5 merge tip in, resolve. 2014-03-20 01:24:33 -05:00
Dick Hollenbeck 2c67c3ff80 * KIWAY Milestone A): Make major modules into DLL/DSOs.
!   The initial testing of this commit should be done using a Debug build so that
    all the wxASSERT()s are enabled.  Also, be sure and keep enabled the
    USE_KIWAY_DLLs option.  The tree won't likely build without it.  Turning it
    off is senseless anyways.  If you want stable code, go back to a prior version,
    the one tagged with "stable".

*   Relocate all functionality out of the wxApp derivative into more finely
    targeted purposes:
    a) DLL/DSO specific
    b) PROJECT specific
    c) EXE or process specific
    d) configuration file specific data
    e) configuration file manipulations functions.

    All of this functionality was blended into an extremely large wxApp derivative
    and that was incompatible with the desire to support multiple concurrently
    loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects.
    An amazing amount of organization come from simply sorting each bit of
    functionality into the proper box.

*   Switch to wxConfigBase from wxConfig everywhere except instantiation.
*   Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD,
    PGM_SINGLE_TOP,
*   Remove "Return" prefix on many function names.
*   Remove obvious comments from CMakeLists.txt files, and from else() and endif()s.
*   Fix building boost for use in a DSO on linux.
*   Remove some of the assumptions in the CMakeLists.txt files that windows had
    to be the host platform when building windows binaries.
*   Reduce the number of wxStrings being constructed at program load time via
    static construction.
*   Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that
    these functions are useful even when the wxConfigBase comes from another
    source, as is the case in the KICAD_MANAGER_FRAME.
*   Move the setting of the KIPRJMOD environment variable into class PROJECT,
    so that it can be moved into a project variable soon, and out of FP_LIB_TABLE.
*   Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all
    its child wxFrames and wxDialogs now have a Kiway() member function which
    returns a KIWAY& that that window tree branch is in support of.  This is like
    wxWindows DNA in that child windows get this member with proper value at time
    of construction.
*   Anticipate some of the needs for milestones B) and C) and make code
    adjustments now in an effort to reduce work in those milestones.
*   No testing has been done for python scripting, since milestone C) has that
    being largely reworked and re-thought-out.
2014-03-19 19:42:08 -05:00
Maciej Suminski 5ed0980dd5 Merged upstream. 2014-03-06 09:42:16 +01:00
jean-pierre charras a1b065c190 Fix a minor bug I created in commit 4733 2014-03-05 18:57:13 +01:00
jean-pierre charras 764b5c11bf Minor code cleanup in 3d viewer (remove dead or useless code). Some minor other fixes. 2014-03-05 18:40:23 +01:00
Maciej Suminski 75026d8754 Renamed BOARD_CONNECTED_ITEM::GetNet() -> GetNetCode()
Renamed BOARD_CONNECTED_ITEM::SetNet() -> SetNetCode()
Added BOARD_CONNECTED_ITEM::GetNet() for accessing NETINFO_ITEM* of a given item.
Fixed module editor crash when launched to edit a module from a PCB.
Replaced some BOARD::FindNet( item->GetNet() ) calls with BOARD_CONNECTED_ITEM::GetNet().
2014-02-25 11:40:34 +01:00
jean-pierre charras f068c0d94f Pcbnew: Autoplace functions: renamed spread footprint functions. Rewritten.
Now footprints, after loaded by reading a netlist are grouped by sheets by the footprints spread function, and the grouping is better.
Rename 2 files. Fix minor issues. Clean code
2013-11-27 14:20:42 +01:00
jean-pierre charras 18616d7782 Fix bugs in autoplac.cpp 2013-11-25 12:29:16 +01:00
Andrey Fedorushkov 1b58582e25 pcbnew: fix error build autoplace.cpp in linux gcc-4.8.2
template: add file fp-lib-table.for-eagle
2013-11-25 10:10:24 +04:00
jean-pierre charras 5f01f123de All: GetBoundingBox returns now a const EDA_RECT.
Pcbnew: Code cleaning and bug fix in autoplace functions
Dialog exchange footprints has now a separate button to update the .cmp file, only on request.
2013-11-24 18:48:14 +01:00
Dick Hollenbeck efb34166ea *) retain grid origin in the BOARD and save it in legacy and kicad board files.
*) add hotkey for setting the grid origin as 'S', in board editor, module editor.
*) re-position the function interface for cursor movement from BASE_SCREEN into
   class EDA_DRAW_FRAME.  This is a prelude to getting rid of BASE_SCREEN or
   splitting it up.
2013-08-03 00:15:23 -05:00
Lorenzo Marcantonio d00c83cde9 Migrated the interfaces accepting angles to the double type
The plan goes like this:
- eeschema still uses int in decidegrees
- all the other things internally use double in decidegrees (or radians
  in temporaries)
- in pcbnew UI the unit is *still* int in decidegrees

The idea is to have better precision everywhere while keeping the user with int i
angles. Hopefully, if a fractional angle doesn't come in from the outside, everything
should *look* like an integer angle (unless I forgot something and it broke)

When the time comes, simply updating the UI for allowing doubles from the user should
be enough to get arbitrary angles in pcbnew.
2013-05-05 09:17:48 +02:00
Lorenzo Marcantonio cb49ca5ae2 More int casts to rounding conversions 2013-05-04 13:57:09 +02:00
Lorenzo Marcantonio 78e41187b3 Moved utilities for angles in trigo.h
New conversion routines and sin/cos implementation for angles in decidegrees
2013-05-02 20:06:58 +02:00
Lorenzo Marcantonio 0e903dba5b Angle and distances cleanup (preparing for angles in doubles)
- Removed spurious int casts (these are truncated anyway and will break
  doubles)

- Applied the Distance, GetLineLength, EuclideanNorm, DEG2RAD, RAD2DEG
  ArcTangente and NORMALIZE* functions where possible

- ArcTangente now returns double and handles the 0,0 case like atan2, so
  it's no longer necessary to check for it before calling

- Small functions in trigo moved as inline
2013-05-01 19:32:36 +02:00
Lorenzo Marcantonio 42709330e0 Better strings for the translators (converted concatenations to formats) 2013-04-09 19:49:01 +02:00
Lorenzo Marcantonio 150cfebb59 Fixed some tab-induced disalignments
Charras beat me on fixing the include/sch_item_struct.h include issue from 4069
2013-04-06 14:28:02 +02:00
Lorenzo Marcantonio d12a45923b More work on EDA_COLOR_T and layers.
In particular the new mechanism for handling extended color palettes is in place,
included renaming the ini keys and saving the color name instead of its index; this means better forward compatibility with palette changes.

Since ini keys are changed, colors will be reset
2013-04-04 23:35:01 +02:00
Lorenzo Marcantonio 9fd79dfa91 Implemented the LAYER_NUM typedef (LAYER was already taken as a class name...) to represent a layer number. 2013-03-31 15:27:46 +02:00
Lorenzo Marcantonio aae87178a7 Renamed global variables:
Drc_On => g_Drc_On
Route_Layer_TOP => g_Route_Layer_TOP
Route_Layer_BOTTOM => g_Route_Layer_BOTTOM
Track_45_Only_Allowed => g_Track_45_Only_Allowed
2013-03-27 19:32:12 +01:00
Wayne Stambaugh 7d0ec1a138 More encapsulation work.
* Complete encapsulation of the MODULE class.
* Complete encapsulation of the EDA_TEXT class.
* Encapsulate most of the ZONE_CONTAINER class.
* Add pcbcommon library as a dependency for reSWIGging the scripting
  support.  This should cover most dependency cases.
2013-03-18 15:36:07 -04:00
Wayne Stambaugh 42d7bf6c8e Pcbnew encapsulation and code cleaning.
* Encapsulate most of the MODULE class.
* Start encapsulating the DIMENSION class.
* Lay some groundwork for EDA_TEXT encapsulation.
* Move cleverly hidden MODULE functions into class_module.cpp.
* Use std::swap to exchange TEXTE_PCB values for undo/redo.
* Remove unused members from MODULE class.
* The usual coding policy and documentation fixes.
2013-03-13 14:53:58 -04:00
jean-pierre charras 1be0b66d53 Pcbnew: fix a bug in autoplac.cpp 2013-03-12 17:37:41 +01:00