The WX_COMPATIBILITY mode is always assumed now (the option was removed
previously), but the define is no longer present. So remove the old code
that checked for it and just leave the wxASSERT statements.
This is purely loading in the background based and has no artificial delay.
Will be more useful once kicad.exe ends up loading more on launch immediately ;)
Right now the splash is probably visible the longest launching pcbnew standalone.
The actual splash image can be considered a placeholder
Using std::any from C++17 allows for proper type handling in the
parameter field, removing the need for casting to void* and then casting
the void* to the desired type.
This replaces a hack where the parameter was used to identify a custom
UI ID with a proper solution. This moves the cut/copy/paste actions to
the new system, but more like help/quit/close should also be moved over
in the future.
A function-chain constructor method allows for the long list of
parameters to the constructor to be shrunk to only the ones needed by
each action, and allow self-documenting code for what each part of a
TOOL_ACTION constructor does.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/7617
Its members can be on copper layers, but the group itself isn't on any
layer.
Also fixes a bug where we were trying to clone TRIANGULATED_POLYGON::TRI
shapes as indexable sub-shapes. (The TRI only has indexes into its
parent, so cloning it will only result in segfaults down the line.)
Also fixes a bug where we weren't including copper items inside groups
when checking footprint net ties.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15021
Normally this means surrounded by forward slashes, but we also still
allow any regular expression in a netclass match to keep from breaking
existing documents.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14944
The API is needed for wxFormBuilder, and I couldn't figure out any
way around it, but we can at least reduce the risk of someone calling
it accidentally (again).
When creating a new file lock, we need to check if the containing
directory can be written, not if the file (which may not yet exist) can
be written
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14942
WindowIds aren't actually guaranteed to be unique, and we don't
perform a dynamic_cast on the result of FindWindowById() because
of linker issues....
This is an attempt to fix KICAD-39.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14928
Note that this only works where a BOARD_COMMIT or SCHEMATIC_COMMIT is used.
(BOARD_COMMIT is used almost universally in PCBNew, but SCHEMATIC_COMMIT
has very little adoption in EEschema so far.)
When editing or viewing library symbols, the files are watched for
underlying changes. If any occur, the user is either prompted to reload
(if reloading would overwrite their current edits) or the file is
silently updated to the current version on disk.
This also sets a custom assertion handler to avoid unneeded crashes when
recieving invalid SAMBA packets and turns off assertions entirely when
running in release (non-debug) mode
Don't open-code knockout text shape generation in several different
places.
Make sure triangulated knockout text gets clearance added when
specified.
Collapse duplicated footprint text item plot routine (they're no
longer any different from plotting pcb text items).
Also fixes a bug where we didn't triangulate at all when the char
count didn't warrant the likely overhead of spinning up a
thread_pool.
And fix another bug where EDA_TEXT::GetRenderCache() wasn't using
the given font.
Also reverts using the cache for drawing-sheet text. The text
items are created from scratch from the data items each time
they're drawn, so there's never an existing cache to make use of.
Instead, we now check that the item is in the view, using a very
approximate bounding box generator (because even generating a
real bounding box shows up large in profiles).
And, lastly, fixes a bug where EndPos was never considered in
DS_DATA_ITEM::IsInsidePage().
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14822
wxSingleInstanceChecker is meant for running programs, not file locking.
This implements an RAII class for file locking that stores the lock
files next to the file being locked, allowing it to be easily found and
removed. Also includes the ability to override the lock, with
information about the original owner
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14734
[ADDED]: A panel to the schematic editor that allows quick access to all
of the items connected to the currently highlighted net.
This is an initial swag at implementing a full net navigator feature. For
now it only shows the currently highlighted net nodes. The incremental
net list advanced setting must be enabled in order to use this feature due
to performance reasons. There are still some issues with saving the panel
position which will be addressed in the future.
Initial code for serializing wxAuiPaneInfo settings to and from JSON have
be implemented.
Change teardrop generation to rely more heavily on BOARD_CONNECTIVITY
for improved performance.
Add updating of teardrops on BOARD_COMMIT::Push().
Also converts m_CopperItemRTreeCache to std::shared_ptr.
We don't copy it around anyway, and having to create a new set
of std::unique_ptr's for each operation is likely to be more
expensive than std::shared_ptr's overhead.
Version 7 text alignment changed subtly for stroke fonts from version 6.
Additionally, the output has been different between screen and plotting,
leading to offset text in plotted output relative to the text shown on
screen.
This introduces a fudge factor in FONT::getLinePositions to correct the
offset in the plotting output relative to v6.
This also changes the SCH_PAINTER and PCB_PAINTER to correct the
relative offsets between GAL and PLOTTER classes. The source of these
offsets is atm unclear.
Fixes https://gitlab.com/kicad/code/kicad/issues/14755
Many minor tweaks were added that changed the output of the stroke font
from v5/v6. These offsets changed the gerber output expected. This
reverts the changes to something much closer to the v6 output. It is
not pixel-perfect but gets very close on most texts.
Fixes https://gitlab.com/kicad/code/kicad/issues/14609
A sheetpath is required to correctly resolve text variables.
Depending on currentSheet is rife with bugs.
There are many places where we do *not* want to be prepending
field names to the field values, such as netlisting,
building PDF hypertext menus, etc.
Also, Find/Replace needs to work on unresolved text, as
that's what we're going to display (and if replace nuked
your variable references you wouldn't be happy).
Also simplifies the scoring algorithm so that it only
differentiates between exact-match, match-at-start and
any-match. The rest of the position-based matching
stuff is gone, as is the knowledge of the name vs the
keywords vs the description. All that is left to the
provider of the weighted search terms array.
Provides a single-point access for modifying the schematic and symbol
elements that allows chaining updates and reverting partial changes.
Standardizes the undo hierarchy between pcb and schematic editors
As this is another layer on the existing undo/redo structure, the
initial commit does not replace all undo/redo calls currently existing.
These will be handled in a series of follow-on commits
Previously, almost all connectivity updates were full updates, meaning
that the entire connectivity graph would be rebuilt each time a change
was made to the schematic. This update modifies the update to only
correct the subgraphs that are directly affected by the change.
It uses the existing connection graph to find all affected subgraphs as
well as connections to the changes based on the visible schematic.
These elements are removed from the existing connectivity graph and
marked dirty. They then have a new connectivity graph built only around
their changes. The resulting graph is merged into the original.
Currently, this ability is behind an advanced config flag
`IncrementalConnectivity` while testing.
Fixes https://gitlab.com/kicad/code/kicad/issues/10846
Fixes https://gitlab.com/kicad/code/kicad/issues/1794
Settings should be initialized on start-up. This removes the option of
lazily loading the settings from file and instead requires all settings
needed to be loaded on KiFACE start before requesting data from the
settings object
Jeff Young
Jon Evans
jean-pierre charras
Ian McInerney
Ian McInerney
Kuba Sunderland-Ober
Marek Roszko
Mike Williams
Alex Shvartzkop
Seth Hillbrand
Roberto Fernandez Bautista
Wayne Stambaugh