737262ffa8
Allow touching courtyards.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8076
2021-03-31 10:44:59 +01:00
0a0935e0f3
Remove ACTIONS::TranslateLegacyId and TOOL_DISPATCHER::DispatchWxCommand
...
After commit 9535153f9e
2021-03-30 23:20:22 +00:00
8cb6f15687
Warn when diff pair router can't start due to too-small-gap.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7795
2021-03-30 19:49:23 +01:00
b151dd02b9
CADSTAR PCB: Fix incorrect solder mask/paste clearance
...
Need to divide by two as this is a clearance, not diameter.
2021-03-30 13:03:56 +00:00
ad2043eda6
CADSTAR PCB: DrillXoffset and DrillYoffset are zero when not specified
...
Fixes an issue that resulted in pads being loaded 100nm off from the
original CADSTAR position.
2021-03-30 13:03:56 +00:00
6eb2e2a6e3
Fp editor: do not change item UUIDs when loading a footprint from library.
...
Fixes #8066
https://gitlab.com/kicad/code/kicad/issues/8066
2021-03-30 12:58:22 +02:00
78a60e9dfb
PNS: Put polygon error outside pad shapes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7672
2021-03-29 19:49:59 -04:00
6cbc3fb97d
Fix a minor inconsistency between router and DRC
...
Also make sure collision highlighting runs at the starting
location of a drag.
See: https://gitlab.com/kicad/code/kicad/-/issues/7672
2021-03-29 19:41:17 -04:00
8be9832153
PNS: Don't highlight Net 0 (the unconnected net)
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8040
2021-03-29 17:45:07 -04:00
38c849bde7
Pcbnew: load write board netlist to file tool action dynamically.
...
Loading this advanced configuration option statically will cause it to
show up in the hotkey list even when the option is disabled. Creating
the tool action at run time resolves this issue.
2021-03-29 09:04:55 -04:00
3c51964c57
drill report: use more digits in float values for diameters.
...
(Use same resolution in map and rpt files)
2021-03-29 13:02:43 +02:00
f2e68e68d0
Add "Hide Tree" context menu options when tree has no selection.
...
Also cleans up some other code to be more consistent between symbol
editor and footprint editor.
Fixes https://gitlab.com/kicad/code/kicad/issues/8052
2021-03-29 12:02:00 +01:00
6d2f80b4cf
Pcbnew: add write board netlist to file support.
...
This is hidden behind an advanced configuration setting and is primarily
useful for developers trying to troubleshoot the netlist payload sent
from the board editor to the schematic editor.
Fixes https://gitlab.com/kicad/code/kicad/issues/8051
2021-03-28 08:38:29 -04:00
475ac3697f
Ensure toolbar controls have the correct width on frame creation
...
Otherwise they could be slightly too small and then look odd.
2021-03-28 13:07:56 +01:00
d0d6352a25
Fix crash launching footprint editor frame
...
Apparently we get this event before the frame is fully-baked
2021-03-27 23:48:07 -04:00
42c6af4bd8
Cleanup ACTION_MENU creation in some places
...
The ACTION_MENU constructor now takes the tool as an argument,
so the call to SetTool() immediately following it can be removed
and the tool just passed into the constructor.
2021-03-27 19:16:58 +00:00
9535153f9e
Move the import graphics menu item to the action
2021-03-27 19:04:16 +00:00
7bfa8575fa
Remove redundant information from import/export menu item labels
...
Saying "Import/Export" on the labels when the submenu has "Import"
or "Export" in it is redundant.
Note that we can't just update the action text with the new name,
because that is used in the hotkey list and would become too confusing
without the "Import"/"Export" text.
2021-03-27 18:50:35 +00:00
eb8744816e
pcbnew: fix the i18n of the rules syntax help
2021-03-27 16:26:13 +00:00
f6041fb52d
Force update of some text when activation status changes
...
The text areas aren't always redrawn when the window is activated
or deactivated, so we need to force a refresh of the text to ensure
it is the correct font color.
2021-03-26 15:50:56 +00:00
d18323dcf0
Excellon file writer: remove not very useful comments outsider the header section.
...
Looks like comments outside header section can create problems in some readers.
Note: comments inside header section are clearly allowed in Excellon file format)
(trial to fix bug 8032)
2021-03-26 09:46:32 +01:00
132ec37b56
Handle arc in buildHullForPrimitiveShape
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8008
2021-03-25 21:25:30 -04:00
34a435cd56
CADSTAR PCB: Handle import of pads with different paste and mask sizes
...
KiCad doesn't yet support full padstacks, but at least we can use the
solder mask / solder paste expansion to import a better result. Also
we can disable the specific layer if the shape has a size of zero.
2021-03-25 17:54:56 +00:00
107a1990c9
CADSTAR PCB: Handle route offset
...
The CADSTAR post processor has a peculiar feature called "route offset"
which effectively shortens tracks when the pad, track or via that it
connects to has a smaller width. This operation is not saved in the
design itself, but applied as a post processing operation meaning that
the importer has to apply it when loading on the board.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6648
2021-03-25 17:50:33 +00:00
1468764f83
CADSTAR PCB: Lock footprint pads after import
2021-03-25 17:50:33 +00:00
3279e295ac
Don't start filling zones with possibly stale caches.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8014
2021-03-25 17:20:08 +00:00
a2ffb45698
Update diff pair rule syntax to be clearer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8010
2021-03-25 10:29:38 +00:00
bbd7b4ca8c
Eeschema, selection tool: uniformize the cursor shape and the actual modifiers.
...
SHIFT, CTRL, ALT modifier keys were handled in 2 different codes, one for
the selection tool and another to modify the mouse cursor shape, with 2
different configs.
Now the modifiers are managed from only one function.
Pcbnew: group also SHIFT, CTRL, ALT modifier keys management to a specific function.
Fixes #8021
https://gitlab.com/kicad/code/kicad/issues/8021
2021-03-25 10:28:20 +01:00
9a0f9575b6
Fix minor Coverity warnings
2021-03-25 09:12:24 +01:00
41839f7e3f
Update panel_setup_rules_help.md diff pair clearance example to use new A.isCoupledDiffPair() function
2021-03-25 03:33:19 +00:00
cb722c6bfa
Code style
2021-03-24 18:11:32 -04:00
75819206a0
Add support for dark theme in plugin icons
...
Action plugin authors can specify alternative icon path for dark theme.
If it's not specified then standard icon will be used for both light and
dark themes. If neither icon is specified then the default puzzle piece
icon is used.
Fixes #7984
2021-03-24 21:59:30 +00:00
b37b7d53b4
Fix geographic annotation bug when back annotating to schematic.
...
For some reason, the footprint UUID was being prefixed to the sheet path
which caused the symbol look up by sheet path to fail. An option was
added to not do this when the geographical back annotation to the schematic
is performed.
2021-03-24 09:57:36 -04:00
e409b04538
More gracefully handle tinyspline not liking a spline definition
...
Partial fix for #6634
2021-03-24 00:37:01 -04:00
f57dcf2a34
Fix connectivity to only resolve conflicts on netlist load
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8007
2021-03-23 17:43:24 -04:00
a94ce75c02
Fix multiple filter calls that were producing false cache positives.
...
When processing a compound shape we'd decide the first of them didn't
collide and then put false into the cache. The cache value would then
be used for all the other shapes in the compound shape, which very well
might actually collide.
Fixes https://gitlab.com/kicad/code/kicad/issues/8003
2021-03-23 21:06:16 +00:00
a94a481574
Fix compile warnings
...
Some simple warnings and also a deprecation warning from wx
because they felt that a function should be renamed...
2021-03-23 19:46:49 +00:00
4dbeb15024
Use a worker thread to send socket commands
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6503
2021-03-23 03:20:40 +00:00
381cc27548
Add missing include
2021-03-22 21:25:03 -04:00
49b1aceb8b
Handle doc urls enclosed in parens.
...
It seems this has become a common pattern in at least some of our
libraries.
Fixes https://gitlab.com/kicad/code/kicad/issues/7963
2021-03-22 21:20:54 +00:00
f24f0d93a5
Make OK default in inspectors (and hook up to close window).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7831
2021-03-22 21:20:54 +00:00
a677998f47
Don't select new items after cancelling move following item duplication
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7956
2021-03-22 18:49:43 +01:00
9ce34102af
Make sure projects get created for boards migrated from 5.x
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6886
2021-03-21 16:21:44 -04:00
8be213e36f
Trim includes (and use consistent terminology in error messages).
2021-03-21 20:15:47 +00:00
a9eb83201e
Remove ZONE::ClearFilledPolysList() and fix ZONE::Unfill()
...
ClearFilledPolysList is redundant and Unfill() was missing the clearing
of m_insulatedIslands
This fixes potential latent bugs in zone unfilling.
2021-03-21 20:13:20 +00:00
50aafb9d2a
Do not auto-refill zones when added or edited
...
The only exception is when using the Zone Properties Dialog and
user preference is enabled
2021-03-21 20:13:20 +00:00
7a255edc5f
Panel Edit Options: Fix "Show Page Limits" tooltip message
2021-03-21 20:13:20 +00:00
f6c4677189
ADDED Option to disable automatic zone filling in pcbnew
...
The new setting is stored as 'editing.auto_fill_zones' and controls
whether zones should be refilled after certain actions or not.
2021-03-21 20:13:20 +00:00
a743e0c52b
Add Zone fill to undo stack
...
Allows undoing zone filling and reverting to previous fill state.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7440
2021-03-21 20:13:20 +00:00
5e0b65c3a8
Change wording of corner rounding action
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4505
2021-03-21 15:55:56 -04:00
37242f67e0
Connectivity: just pick the most popular net to update conflicting clusters
...
CHANGED: when pad net assignments are changed in a conflicting way (i.e.,
tracks exist that short out more than one net after the change,
track nets will be updated to the net with the most pads).
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7929
2021-03-21 15:31:37 -04:00
f0ed5fab39
add missing include for wxWidgets 3.1.4
2021-03-21 17:35:20 +01:00
e1840ccbd3
Handle exceptions thrown by footprint library table
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7973
2021-03-21 11:43:24 -04:00
68f3d09ac1
altium: introduce tokenizer for query language
...
Based on this tokenizer, a LL1 parser will be built in the future.
2021-03-21 16:39:23 +01:00
fe196771d8
Implement isCoupledDiffPair() DRC rule function.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7975
2021-03-20 23:07:36 +00:00
44e2151ade
Allow diffpair gap to override netclass clearance value.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7975
2021-03-20 21:53:30 +00:00
ce46fe6581
Add insideFrontCourtyard and insideBackCourtyard DRC functions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7972
2021-03-20 21:53:30 +00:00
07aea4339d
Formatting.
2021-03-20 21:53:29 +00:00
4a53917efa
wrml exporter: optimize circle to segment approximation.
2021-03-20 18:16:58 +01:00
f1c599fa4d
Tweak PCB selection behavior to reduce unintuitive behavior
...
We were discarding shapes too aggressively for having a
larger area than a shape underneath.
Let's also try showing fewer disambiguation menus, in particular
always preferring items on the active layer when the candidates
include overlapping items of similar area on other layers.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7949
2021-03-20 13:11:51 -04:00
6924b98bc3
Remove deprecated BRIGHT_BOX preview item
2021-03-20 12:09:20 -04:00
c04e19f9ac
Include optimization: move some things from common.h to point-of-use
2021-03-20 12:09:18 -04:00
6d5536707c
wrml exporter: remove all duplicate code with Pcbnew. Especially, converting layers to polygons exist in Pcbnew, so no need to rebuild item shapes in the exporter. Moreover, in exporter, rebuilding shapes was not up to date and did not include changes in Pcbnew.
2021-03-20 13:44:52 +01:00
4073153e75
vrml exporter: fix incorrect export of zones on solder mask layers. minor changes in colors.
2021-03-20 11:13:55 +01:00
7a8abcadd2
PCB_SHAPE: Use SHAPE_ARC as the effective shape of an arc
2021-03-19 22:43:43 -04:00
6c3b02aabe
Cleanup (no functional changes).
2021-03-19 16:14:34 +00:00
3fec3a3a15
Fix a minor Coverity warning
2021-03-19 15:01:16 +01:00
90742bba9f
Adjust constraints after editing other points.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7103
2021-03-19 11:35:17 +00:00
4034fcb7ac
Fix yet another edge case in B&W printing of holes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7944
2021-03-18 23:50:04 +00:00
af88b01068
export_vrml: Better export of pad shapes, both on copper and paste layers.
...
It removes duplicate code between Pcbnew and the vrml exporter.
Remove also an useless option (plain board) that exported just the board body.
2021-03-18 20:43:27 +01:00
8d5161dae2
export_vrml: more code cleanup and export solder mask
2021-03-18 16:44:28 +01:00
95051c4786
Also duplicate arcs in pcbnew
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7943
2021-03-18 13:35:30 +00:00
e377f2667e
Adding COMMIT support before/after invocation of a python script
...
Allows undo/redo of ACTION_SCRIPT commands
2021-03-18 12:52:17 +00:00
16ef1910ff
export_vrml: more code cleanup and fix incorrect shape of round chamfered pads
2021-03-18 13:35:06 +01:00
074f0432f0
vrml exporter: more cleaning code and enhancements. Dialog exporter: Add option to use board center as coord origin.
2021-03-18 09:52:04 +01:00
b050823c98
export_vrml.cpp: mainly clean code and add some fixes.
2021-03-18 09:52:03 +01:00
36259b1f6b
Refresh lib trees after editing library tables.
...
Also make sure that we grab the library item descriptions from their
source rather than just the cached tree copy.
Fixes https://gitlab.com/kicad/code/kicad/issues/7875
2021-03-17 14:54:18 +00:00
46d71f0d23
Go back to validate-on-OK, but stop doing design checks.
...
If we keep doing design validations at two different places, they can
only start to drift apart. Board Setup should validate for malformed
data ONLY; everything else is the business of DRC.
This also fixes a bug where implementation validations would not allow
OK in the dialog, but wouldn't put up a message to say why. We now use
the InfoBar impl from Jon's commit for that.
2021-03-16 14:49:03 +00:00
bb8d31cd06
Fix context item selection filter type omissions
...
Fixes #7839
2021-03-16 13:08:50 +00:00
cad1cb0262
Improve naming.
2021-03-16 12:07:06 +00:00
c7648b4dba
Formatting.
2021-03-16 12:07:06 +00:00
2ad9da582a
Refresh geometry when clearance changes if clearance lines are shown.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7906
2021-03-16 12:07:06 +00:00
c3c3649211
Stop text from causing a shift during flip when >1 items are selected
...
1e1be730https://gitlab.com/kicad/code/kicad/issues/7304
2021-03-15 21:24:16 +00:00
b2ac9cc29f
Formatting & naming conventions.
2021-03-15 19:04:59 +00:00
a086795ac9
Pcbnew: fix dimensions text rotation and position.
...
Issue #6940 is not addressed, as being able to
rotate a dimension with a group is preferred over
easily rotating the text.
Fixes https://gitlab.com/kicad/code/kicad/issues/3847
2021-03-15 15:44:36 +00:00
cb451dc4b2
Pcbnew: Fix memory leaks and fix inefficient code.
2021-03-14 20:27:59 +01:00
52e2bf0000
Keep focus on filter boxes in footprint viewer
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4884
2021-03-14 15:10:20 -04:00
a1b4bcc210
Refinements (add icons to menuitems and better help strings)
2021-03-14 18:44:31 +01:00
c763b0088e
Fix some issues in drawing_stackup_table_tool.cpp
2021-03-14 17:44:16 +01:00
3ba7fc0cc2
Move board stackup table drawing code from drawing_tool.cpp to drawing_stackup_table_tool.cpp
...
This avoid a too large drawing_tool.cpp file.
Remove also values in internal units and convert them to mm.
2021-03-14 17:44:16 +01:00
521982cbf6
Avoid double-redraw on board load
2021-03-14 11:42:09 -04:00
2cbd7b5043
Reduce scope of some view repaints to improve performance
2021-03-14 11:42:09 -04:00
2528e1fc98
EXCELLON_WRITER: update info in comments.
2021-03-14 12:38:03 +01:00
953279ce70
Gerber plot: fix missing AperFunction attribute for texts.
...
Fix also a incorrect AperFunction attribute for graphic items on Edge.Cuts
in footprints
2021-03-14 12:37:13 +01:00
f428ce03f2
ADDED: pcbnew - stackup / characteristics table
2021-03-13 20:19:46 +00:00
18470693fe
Copy linewidths when coverting to polygons.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7893
2021-03-13 17:06:49 +00:00
93db7a130a
Offset 3D models when moving footprint origin.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7868
2021-03-12 17:37:38 +00:00
faf9cca938
Fix many cases of old mils flag getting interpreted as allowEval flag.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7883
2021-03-12 15:15:50 +00:00
24fd326cd1
Make sure we have different strings for past & future tense.
...
(In English both were 'Set', but that means our translation framework
won't support two different strings in other languages. Changed to
'Add' and 'Added'.)
Fixes https://gitlab.com/kicad/code/kicad/issues/7888
2021-03-12 14:59:38 +00:00
ba46a8d12d
Fix some layout issues resulting from wxWidgets version bump.
2021-03-12 14:54:54 +00:00
Jeff Young
Ian McInerney
Roberto Fernandez Bautista
jean-pierre charras
Jon Evans
Wayne Stambaugh
Konstantin Baranovskiy
firebladed
qu1ck
Marek Roszko
Jonathan Haas
Thomas Pointhuber
Jean-Samuel Reynaud
pgvoorhees
Mikolaj Wielgus
Fabien-B
Fabien Corona