702c0d6f72
Step export: shows a report message if a 3D model is not loadable:
...
- When a vrml model is specified and model substitution is not allowed
- When the model substitution is allowed but the step model is not found
2021-07-08 17:22:33 +02:00
4025603a1f
Formatting.
2021-07-06 21:36:27 +01:00
2c1da70181
Write all variables to temp config file and have Kicad2Step use that.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7670
2021-06-14 16:54:45 +01:00
f968fc8719
Fix source comment / documentation typos
2021-06-09 19:32:58 +00:00
b891b5e1e2
Do not blindly substitute model names
...
Makes model substitution (VRML->STEP in STEP Export) optional. This can
prevent nasty surprises where the user doesn't see/can't affect the
outcome
Also, when substituting models, do not maintain scale factor. So a VRML
model with non-unity scaling will not be export as a STEP file (of the
same name) with non-unity scaling. This is the first step to address
https://gitlab.com/kicad/code/kicad/-/issues/1781
2021-06-08 16:38:47 -07:00
ab82b01714
Evict the last bits of wx.h
2021-06-07 20:23:27 -04:00
d7616fdca8
Fix a few compil or coverity warnings.
2021-06-01 09:04:37 +02:00
6b1658a098
kicad2step: fix incorrect Bezier curve handling.
...
Fixes #7930
https://gitlab.com/kicad/code/kicad/issues/7930
2021-03-22 11:08:40 +01:00
658bc2f4b2
kicad2step: provide a basic default product name
...
It would be ideal if it would use the s-expr
kicad_pcb.general.title_block.title by default, and then fall back to
something based on the output step file, but even just the output step
file is a far better default than the "open cascade step translator
version..." text it uses at the moment.
Similar improvements using the title_block would be future work.
Signed-off-by: Karl Palsson <karlp@etactica.com>
2021-03-04 17:01:07 +00:00
1d3159c1cb
Add support for PKZIP-based stpZ files
...
FreeCAD uses gzip-based stpZ files but many programs will compress using
the archive format of PKZIP (e.g. WinZIP). This handles the archive
format, taking the first file from the archive, which by the standard
should be the STEP file
Fixes https://gitlab.com/kicad/code/kicad/issues/5376
2021-02-27 16:44:54 -08:00
b823c49a95
Handle polygons in step export
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7707
2021-02-25 09:50:01 -08:00
6a39b81647
Fix the last of broken Doxygen comment specifiers.
2021-01-27 17:39:44 -05:00
cdd4953589
STEP export: fix crash when a rectangle is used in a footprint.
...
Fixes #6958
https://gitlab.com/kicad/code/kicad/issues/6958
2021-01-07 09:24:30 +01:00
d1f782717e
Handle rect and bezier in footprint exports
...
Teach kicad2step about footprint edgecuts that use fp_curve and fp_rect
Fixes https://gitlab.com/kicad/code/kicad/issues/65054
2021-01-03 12:08:12 -08:00
5db75805bd
Step exporter: better values for min distance between 2 points to merge them.
...
- The default value is 0.01 mm (according to comments and similar to the 3D viewer
settings that uses 0.02 mm)
- The export dialog has now 3 values 1 micron, 0.01mm (default) and 0.1 mm
The 0.1 micron option is removed: it makes no sense for a mechanical tolerance.
2021-01-03 11:01:03 +01:00
a9feb1c2d4
Update PCBMODEL::SetMinDistance to set BRepBuilderAPI precision
...
Fixes #3818
2021-01-03 08:40:40 +00:00
8de9cff4e0
Change environmental variables to human-readable
...
Versions specific variables that may point to objects that change
through versions, allowing multiple KiCad versions to operate correctly
(even on MSW) on the same machine.
2021-01-01 16:20:35 +00:00
7565f60a03
Swap wxFileInputStream/wxFileOutputStream for the buffered kind
2020-12-12 18:52:02 -05:00
dd4298bb94
Coverity fixes: 280374, 313611, 313648, 313649, and 314720.
2020-12-11 13:29:52 -05:00
99da663e82
Remove unused variables plus some more fixes from CppCheck
...
Remove unused variables plus a few more fixes from CppCheck
Remove unused variables plus a few more fixes from CppCheck
2020-11-19 02:28:47 +00:00
0e44f5128c
Add const specifiers
2020-11-18 19:50:36 +00:00
a207bd97bb
Naming conventions.
2020-11-17 16:05:49 +00:00
723b9e6a77
Fix kicad2step sexpr parser to include new footprint token.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6406
2020-11-17 08:49:24 -05:00
61bca4aaa4
A bit of "module" erradication, nameing conventions, and formatting.
2020-11-14 21:21:54 +00:00
666c11965a
Clean up some more MODULE terms.
2020-11-14 19:56:06 +00:00
9ed6cdd943
Remove GITHUB plugins
...
KiCad github downloads are no longer supported
Fixes https://gitlab.com/kicad/code/kicad/issues/6182
2020-10-29 16:45:04 -07:00
d4eb7b0f3d
Step export: fix Bezier curves export.
...
Fixes #6054
https://gitlab.com/kicad/code/kicad/issues/6054
2020-10-21 10:18:03 +02:00
4085757aeb
Remove beginning/ending spaces in translations
...
Adding space padding makes translations more difficult by increasing
string counts
2020-10-20 12:08:04 -07:00
7414a62947
Attempt to support Bezier curves in STEP export: a fix.
...
The curve is still exported as segment
2020-10-20 18:40:01 +02:00
12b106aba4
Attempt to support Bezier curves in STEP export. First code.
...
The bezier curves are in this code replaced by a segm between
the 2 ends curves
2020-10-20 16:45:38 +02:00
f18fb9fe64
Step exporter: fix a wxWidgets alert.
...
Fixes #4760
https://gitlab.com/kicad/code/kicad/issues/4760
2020-10-06 21:40:39 +02:00
63471d861d
Step exporter: avoid crash when the board to export has not closed outlines.
2020-10-06 16:03:43 +02:00
904d186f6d
Don't export hidden models to STEP.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5451
2020-09-03 22:59:45 +01:00
f1b1e59cf0
Catch error when decompressing
...
Make sure we catch errors when thrown by zlib
Fixes https://gitlab.com/kicad/code/kicad/issues/5376
2020-08-26 14:19:46 -07:00
d0e43ab9f1
STEP: Export stpz files
...
Also include .stpz files as alternates to wrl/wrz models
2020-08-25 19:27:44 -07:00
e3988b446a
Adjust pointer duplication logic
2020-08-18 11:11:41 +00:00
3b9c47a1be
Fixes for rectangle segments in STEP plugin.
2020-08-18 11:11:41 +00:00
265f28afe1
Fix a minor compil warning and a Coverity warning
2020-07-30 10:40:51 +02:00
fd6c9c7685
kicad2step: fix a bug when the board has no hole.
...
kicad2step was trying to remove an empty hole list, generating a OCC error.
Fixes #4242
https://gitlab.com/kicad/code/kicad/issues/x4242
2020-04-22 10:43:28 +02:00
5143f87678
Kicad2step: Many fixes in oce_utils.
...
- Better code and messages.
- Speedup calculations when removing cutouts and holes from main board.
- Do not stop step generation when trying to load a 3D modele having issues.
2020-04-15 11:44:12 +02:00
b68bdc22d7
Fix in kicadpcb reader. Update dialog export step
...
kicad2step: code cleanup, and more activity messages displayed
2020-04-15 10:51:35 +02:00
110b05fe78
kicad2step: convert it from a wxAppConsole to a wxApp, using a wxFrame/wxPanel
2020-04-15 10:51:35 +02:00
99a28fa3e5
Fix typos in comments.
2020-03-24 16:24:53 +00:00
ad3c4b37ab
Fix a few coverity warnings
2020-02-01 15:15:51 +01:00
39b1f0e1ff
Replace wxCriticalSection with std::mutex
2020-01-15 23:42:16 +00:00
a46abcd2dc
FILENAME_RESOLVER: fix missing conversion from UTF8 to wide chars.
...
Fixes #3742
https://gitlab.com/kicad/code/kicad/issues/3742
2020-01-07 13:35:37 +01:00
c6f5df134c
Minor speed cleanup
...
This adjusts iterators to use const reference when only used for
copy. It also ensures pre-allocation of vectors when size is known
ahead of time.
2019-12-05 14:20:59 -08:00
4d2e953f42
Cleanup: Replace C-only deprecated headers
...
This replaces headers deprecated by C++14 with their equivalent
replacement
2019-12-05 11:03:15 -08:00
d77ba30a95
Replace __WXDEBUG__ (improperly used) by DEBUG in some #define.
...
__WXDEBUG__ comes from a build option of wxWidgets,
and is not related to a Debug versus Release Kicad build.
2019-10-14 11:17:38 +02:00
a0ed40876d
kicad2step: scale models
...
Fixes: lp:1784257
* https://bugs.launchpad.net/kicad/+bug/1784257
2019-08-15 14:29:03 -07:00
jean-pierre charras
Jeff Young
luz paz
Seth Hillbrand
Marek Roszko
Karl Palsson
Wayne Stambaugh
Mikołaj Wielgus
Dominik Wernberger
Yegor Yefremov
Ian McInerney
Simon Schubert