65507e7186
router: extend dump format to support automatic regressions tests of interactive routing scenarios
2022-10-31 11:17:31 +01:00
3e53426b6c
Use same ratsnest colours in the router as the rest of KiCad.
2022-10-16 22:21:14 +01:00
6252840abd
PNS/Router Tool: Refactor Continue From End
2022-09-28 13:29:52 +00:00
1be0deb58f
PNS/Router Tool: Refactor Finish Route
2022-09-28 13:29:52 +00:00
f1261e71d4
Replace boost::optional with std::optional
2022-08-25 15:50:47 -07:00
297c60923e
router: return routing status from ROUTER::Move()
2022-06-03 23:28:41 +02:00
965ab42938
router: when dragging segments, don't snap to other segments on the same layer. Fixes drag flickering for short segments.
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/9720
2021-12-15 01:48:04 +01:00
59807d8d26
A better solution to discarding pending shove operations
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9553
2021-11-09 00:00:54 -05:00
64f77b3596
PNS: Add support for 90-degree corner modes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6902
2021-11-03 02:14:23 +00:00
153594b9ea
PNS: Actually implement the AbortRouting API
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9425
2021-10-31 16:06:57 -04:00
2bd735b631
A little more safety in setting the router idle mode.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8765
2021-07-09 10:26:12 +01:00
3475d0cebd
PNS: Grab start item based on clearance if no direct hits found
...
Fixes annoying "routing start point violates DRC" messages when
entering the router from the hotkey and not directly over a track.
2021-06-06 14:57:52 -04:00
cdfb014ab6
CHANGED: Account for via height in track length calculations
2021-04-04 13:59:18 -04:00
8be213e36f
Trim includes (and use consistent terminology in error messages).
2021-03-21 20:15:47 +00:00
12dfb541fc
router: expose current view area to the router algorithms so that the optimizer could know not to mess with traces/vias not currently visible to the user (wip)
2021-02-25 17:18:23 +01:00
af95235f47
router: report debug log events from DRAGGER
2021-02-25 17:18:23 +01:00
792904557e
Remember Parent data when routing
...
Keeps parent information such as UUID and pad removal options for
elements that are just updated in routing rather than created fresh or
fully destroyed.
Fixes https://gitlab.com/kicad/code/kicad/issues/7460
2021-02-07 17:08:43 -08:00
2ea6bc5529
Formatting.
2021-01-04 19:19:55 +00:00
648c42f643
Show collisions preventing routing from starting.
...
Also introduces a callback to the infobar so that the view can be
cleaned up when the timer expires.
Fixes https://gitlab.com/kicad/code/kicad/issues/6930
2021-01-04 19:19:55 +00:00
71215bcab3
Make sure TH pads get collision layer highlighted.
...
Also cleans it up to centralise all the decision-making.
Fixes https://gitlab.com/kicad/code/kicad/issues/6925
2021-01-03 21:16:09 +00:00
ecc0e861d3
Implement hole clearance and hole-to-hole clearance in router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6882
2021-01-01 00:31:36 +00:00
1b93663627
Formatting.
2021-01-01 00:31:36 +00:00
00edc85f4f
Allow layer switching when routing from pad.
...
Additionally, don't process layer events from both main loop and
transitions -- it makes for a mess.
Fixes https://gitlab.com/kicad/code/kicad/issues/4832
2020-12-02 21:17:56 +00:00
f5443de7f9
D_PAD -> PAD.
2020-11-13 15:16:24 +00:00
8bfb255c96
Put a warning when routing can't start due to DRC violation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4975
2020-11-01 23:46:42 +00:00
409cd9d4ee
Formatting.
2020-11-01 20:25:36 +00:00
fd4b9f0efa
PNS: ratlines need to not be debug graphics
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5995
2020-10-13 20:04:47 -04:00
38cef95da9
router: initial support for V6 Design Rules (width/clearance/diff pair width/diff pair gap). Still a lot of work to do!
2020-10-09 00:01:26 +02:00
6d50c9749c
Mark the colliding shape so we know which one to highlight.
...
Also checks the nets when checking for a pad being flashed on a particular
layer (so we don't end up thinking the currently-routing-collided track
is a connection).
2020-10-05 22:32:07 +01:00
adff7f749b
PNS: Addition layer smarts
...
Edge.Cuts have no parent but cross all layers, so we need to handle the
"all layers" case. Also renames "IsPadOnLayer" to "IsOnLayer".
Fixes https://gitlab.com/kicad/code/kicad/issues/5351
2020-08-25 09:42:50 -07:00
afc94fdec3
PNS: Be better about handling multiple layers
...
Rather than adding pads/vias multiple times for each layer, we introduce
the "alternate shape" idiom to PNS that allows us to optionally place
the collision constraint on the hole instead of the pad for those
vias/pads that have inner layers removed.
Fixes https://gitlab.com/kicad/code/kicad/issues/5158
Fixes https://gitlab.com/kicad/code/kicad/issues/5198
Fixes https://gitlab.com/kicad/code/kicad/issues/5195
2020-08-16 12:39:15 -07:00
379aa8f3b5
router: clearer distinction between LOGGER and DEBUG_DECORATOR classes.
...
The first one keeps a log of events (start routing, mouse motion, etc).
The second allows for adding temporary debug drawings and messages which are stored synchronously with the events in LOGGER.
The event stream together with the PCB design (now with UUIDs) can be used to deterministically replay routing bugs as the user sees them.
2020-07-22 18:05:54 +02:00
44905e1b0a
router: initial support for dragging components with traces attached
2020-02-28 23:17:15 +01:00
4525a17076
router: backspace key to undo last fixed segment(s)
2020-02-27 22:02:56 +01:00
8c19b4b6ae
pcbnew: Adding arcs to PNS
...
This is allows ARCs in tracks to be synchronized with
the PNS router. Note this does not yet include the UI components
to route curved traces
2020-02-21 16:11:41 -08:00
e59a3d981e
Implement a new settings framework across all of KiCad
...
CHANGED: Settings are now stored in versioned sub-directories
ADDED: First-run dialog for migrating settings from a previous version
CHANGED: Settings are now stored as JSON files instead of wxConfig-style INI files
CHANGED: Color settings are now all stored in a separate settings file
CHANGED: The symbol editor and footprint editor now have their own settings files
CHANGED: Color settings are no longer exposed through BOARD object
CHANGED: Page layout editor now uses Eeschema's color scheme
Settings are now managed through a central SETTINGS_MANAGER held by PGM_BASE.
Existing settings will be migrated from the wxConfig format on first run of each application.
Per-application settings are now stored in one class for each application.
2020-02-19 23:44:56 -05:00
7c28c3838a
Comment-only changes
...
Makes class comments conform to coding standards
2020-01-10 16:43:01 -08:00
cecfeea947
pcbnew: Remove snapping to hidden items
...
Items and layers that are hidden in the view should not be used as snap
points. This happens in multiple locations:
1) Grid Helper for normal tools
2) TOOL_BASE::snapToItem for router
Resolves KiPro Issue #116
Fixes: lp:1833128
* https://bugs.launchpad.net/kicad/+bug/1833128
2019-10-10 09:37:25 -07:00
aa875e5830
PNS: Don't allow routing on hidden layers
...
If the layer is not shown, we should not be allowing it's items to be
selected and chosen as the start/end items in the router.
(cherry picked from commit fc1fb7a590
2019-08-15 12:40:05 -07:00
cf63ae7ae2
pcbnew: Show clearance when editing tracks
...
When requested by display options, we should show the track clearance
when dragging tracks.
Fixes: lp:1818343
* https://bugs.launchpad.net/kicad/+bug/1818343
2019-04-07 21:25:28 -07:00
f6f726acab
router: allow placing tracks/diff pairs without continuing routing by Shift+L-Click
...
Fixes: lp:1777688
* https://bugs.launchpad.net/kicad/+bug/1777688
2018-06-19 19:30:03 +02:00
2faf1a1ed3
Initial support for keepout zones in the P&S router.
2018-02-06 09:43:56 +01:00
69974b73db
Remove some extra semicolons
2017-11-09 19:52:18 +01:00
9932ff32ae
refactoring: wrapped boost::optional in OPT<> class for the purpose of easier transition to C++17 in the future
2017-11-03 23:59:02 +01:00
2d9ab80b4e
Few improvements to the GAL router:
...
- missing 'break track' functionality
- 'drag 45 degree' and 'drag free angle' context menu shorcuts, both in the router tool and in the default context menu
- bugfix: length tuner tool can now be used again
Fixes: lp:1708386
* https://bugs.launchpad.net/kicad/+bug/1708386
Fixes: lp:1708402
* https://bugs.launchpad.net/kicad/+bug/1708402
2017-08-07 14:28:46 +02:00
3257f1a863
pns: fixed inline drag grid snapping & undo-related assertion failure
...
Fixes: lp:1628697
* https://bugs.launchpad.net/kicad/+bug/1628697
2016-09-30 09:29:49 +02:00
5a1f52bf30
Modified tools to use BOARD_COMMIT.
2016-09-12 13:45:57 +02:00
2faca77adf
use unique_ptr to document ownership (PNS::ROUTER)
2016-09-06 16:06:06 +02:00
6c749e0ba8
Remove PNS_ prefix from most types inside namespace PNS
2016-09-06 16:06:06 +02:00
de6281e977
Move PNS router code into namespace PNS
...
update copyright messages
2016-09-06 16:06:06 +02:00
Tomasz Wlostowski
Jeff Young
Mike Williams
Seth Hillbrand
Jon Evans
Johannes Pfister
Seth Hillbrand
Marvin Schmidt
Maciej Suminski
decimad