It happens on Windows, and wxWidgets 3.1.3. It is created by
PNS_TUNE_STATUS_POPUP instance used in tool. I am pretty sure this crash is
created by the stack switching when managing events, due to some changes in
wxWidgets code.
The fix creates the instance on the heap, instead of on the stack.
This is not the first time I see this kind of issue.
From master, commit 21dd8db
Previously, if a SMD pad was round, itb was seen as BGA pad.
But this is not always true. so use always SMD PAD attribute,
until an explicit BGA pad attribute is added in Pcbnew
The IFACE for kicad refers to the board hidden state, not the
temporarily hidden state used by the router. We allow snapping to items
that have been removed by the temporary router state to provide snapping
to original track location.
Fixes#1827 | https://gitlab.com/kicad/code/kicad/issues/1827
Happens when right clicking on an item in displayed lists.
The crash was due to a bug in wxWidgets, and the fix is only a workaround
From commit 5cd7f3fd in master branch.
Also remove duplicate code.
Pad ratsnest settings set to global settings during initilization.
Fixes: lp:1848488
* https://bugs.launchpad.net/kicad/+bug/1848488
(cherry picked from commit 29ce76b4e4)
(slightly modified due to settings structure difference between
master and 5.1)
The aperture option created a Connector pad only on the paste layer.
This is incorrect: the SMD type only is acceptable.
Connector is *only* for edge card connectors.
Moreover, The dialog did not even accept the setting defined by this dialog...
In high contrast mode, the holes of buried vias and microvias were no darkened when not on the active layer.
In high contrast mode, the outer circle of buried vias and microvias were alway darkened.
In high contrast mode, when the selected layer is non visible through-vias are now darkend.
Fixes: lp:1844982
* https://bugs.launchpad.net/kicad/+bug/1844982
(cherry picked from commit 04edc6ceff)
We want to avoid selecting items that are disabled in the item list.
Our standard method is in the GetViewLOD() that performs both size and
visibility. This extends the check to module text and via.
Fixes: lp:1851133
* https://bugs.launchpad.net/kicad/+bug/1851133
In Python3, all division operators promote integers to floats. We need
to downcast back to integer for the polygon vertices.
There was also an unhandled overflow in the QR generation that allowed
more than 512 bits to be loaded. This overflows the type of QR we
generate, so this truncates the input string to 62 bytes ( leaving 12
bits for the checksum )
Fixes: lp:1850223
* https://bugs.launchpad.net/kicad/+bug/1850223
(cherry picked from commit 9bccbaf497)
The oval clearance adds an edge on the 0-length side of a circular oval.
This is not needed and can affect the fill algorithm. Instead, we treat
round ovals as circles for pad polygons
Fixes: lp:1849846
* https://bugs.launchpad.net/kicad/+bug/1849846
The constrained draw was constraining the polygon size to fit the
existing points rather than extending the existing points to fit the
user's intent.
This adds a 90° double-joint for the completion polygon that allows the
user to complete common constrained polygons visually based on the
preview with a double-click to finish.
(cherry picked from commit bae50fab9f)
Fixes: lp:1849299
* https://bugs.launchpad.net/kicad/+bug/1849299
BLOCK elements in DXF are re-usable bits that are useful when editing
the file but should not be shown when importing the model. This skips
all references except those that exist in the default "*Model_Space".
This block is required in each DXF file and cannot be renamed.
Fixes: lp:1790821
* https://bugs.launchpad.net/kicad/+bug/1790821
(cherry picked from commit df3fabfa21)
Flipped footprint pads may report their "primary" layer as not the front
layer in high contrast. We need to check whether the board item for
snaps is visible on the active layers.
Fixes: lp:1847877
* https://bugs.launchpad.net/kicad/+bug/1847877
(cherry picked from commit 07c8596084)
The router items may not yet have a board item parent. In this case,
the reference to the parent needs to be guarded before dereferencing.
Fixes: lp:1847717
* https://bugs.launchpad.net/kicad/+bug/1847717
(cherry picked from commit 0f8a1c22ad)
that can generate the same hash for 2 different footprints.
Therefore, for some footprints, the right footprint was not associated to the component.
The hash calculation was using a XOR to combine 2 sub hash values.
This is not a reliable way to combine these hash values.
They are now added.
Looks better to identify similar and different footprints.
Fixes: lp:1847575
https://bugs.launchpad.net/kicad/+bug/1847575
Items and layers that are hidden in the view should not be used as snap
points. This happens in multiple locations:
1) Grid Helper for normal tools
2) TOOL_BASE::snapToItem for router
Resolves KiPro Issue #116
Fixes: lp:1833128
* https://bugs.launchpad.net/kicad/+bug/1833128
(cherry picked from commit cecfeea947)
Calling Init() in an action routine will reset the router
settings to the state they were in when first starting pcbnew.
The Init() function is automatically called when the tool is created.
Fixes: lp:1843810
* https://bugs.launchpad.net/kicad/+bug/1843810
* Fix wildcard display in the file selector dialog (on GTK
it would show the regex to the user)
* Move the file extension comparison into a common function
(cherry picked from commit b33c3a5ad8)
The parenthesis depth is 2 when the polygon isn't closed. This
shouldn't happen but we have the fall-through to handle odd cases
Fixes: lp:1844872
* https://bugs.launchpad.net/kicad/+bug/1844872
With pads, we should check available anchor points for each connection,
increasing probability of finding connection to match fill algorithm
Fixes: lp:1844661
* https://bugs.launchpad.net/kicad/+bug/1844661
(cherry picked from commit b7128639f8)
Doing so in the internals keeps users from being able to swap layer
names as the dialog does each layer name change individually.
Fixes: lp:1842665
* https://bugs.launchpad.net/kicad/+bug/1842665
(cherry picked from commit f491b7fff7)
Use the HTML_MESSAGE_BOX window to present the warning messages rather
than wxMessageBox which would overflow the display when there were a lot
of graphic items that could not be parsed.
Fixes lp:1839565
https://bugs.launchpad.net/kicad/+bug/1839565
(cherry picked from commit 24454f5105)
You can trigger it before this fix by running Cvpcb when a .kicad_mod file is
incorrectly set as "Legacy" in your footprint table.
(cherry picked from commit e269b5d1b9)
Setting the active layer should be tied to the events that are triggered
by the layer change and overloaded for each frame. This ties the hotkey
back to these events.
Note: In the 5.1 cherry-pick this also adds the missing hotkey to
footprint editor
Fixes: lp:1838244
* https://bugs.launchpad.net/kicad/+bug/1838244
(cherry picked from commit 494d0de9b8)
The local settings panel needs to have its children sized when shown.
Triggering a resize event on changing the pad shape accomplishes this.
This is not triggered in master due to refactor of the custom pad
connection options.
Fixes: lp:1837789
* https://bugs.launchpad.net/kicad/+bug/1837789
Adds the missing default layer to the default board setups for two
layers with parts on single side (either top or bottom)
Fixes: lp:1841294
* https://bugs.launchpad.net/kicad/+bug/1841294
We need to set the footprint local coordinates of the footprint
reference and value fields at instantiation separately from the
TEXT_DIVERS elements.
Fixes: lp:1829727
* https://bugs.launchpad.net/kicad/+bug/1829727
This modifies that logic for optimizing pad connections.
1) Custom pads now prefer the connections to their longer side. This is
particularly important to match the behavior in a rectangular pad
2) Costs for straight lines are non-zero. This favors fewer connections
3) Custom pad breakouts are at the polygon boundary rather than offset
by 0.1mm. This also matches the circular and rectangular paradigm.
4) Line Heads contained in the pad itself are not optimized. This
prevents escaping the pad unnecessarily
Fixes: lp:1824182
* https://bugs.launchpad.net/kicad/+bug/1824182
(cherry picked from commit 06cb21cc47)
TRACK::GetEndNetCode() can get called using a NULL-pointer as 'this'.
The compiler assumes this won't happen and optimizes away a NULL pointer
check at the start of the function (so we might as well remove this check.)
Fixes: lp:1840562
https://bugs.launchpad.net/kicad/+bug/1840562
The Board bounding box calculation has two modes: edges only and
everything. While the everything mode works as expected, the edges only
calculation (and everything that depends on it) was seeing only the edge
cuts on the board drawings layer and not the footprint edge cuts.
Fixes: lp:1839768
* https://bugs.launchpad.net/kicad/+bug/1839768
(cherry picked from commit 99859727e8)
When dragging, you will seldom want to snap to the original item. This
commit prevents the "size of track" snap to the original item and
replaces it with an auxilary grid origin for the snap. This means
effectively that the snap will happen to grid for the original item
unless the cursor is closer to the original item line than it is to the
grid crossing.
Fixes: lp:1820248
* https://bugs.launchpad.net/kicad/+bug/1820248
(cherry picked from commit 0de25e557b)
In rare cases, the VRML triangulator may claim to work but return empty
vectors. These cases need to be caught before we dereference the vector
elements.
Fixes: lp:1838448
* https://bugs.launchpad.net/kicad/+bug/1838448
jean-pierre charras
Fabien Corona
Seth Hillbrand
Seth Hillbrand
Jeff Young
Ian McInerney
Wayne Stambaugh
Erik Bosman
Thomas Pointhuber