0293f880ec
Fix a bunch of group issues with importing graphics.
...
Groups do not own their children; they only reference them. That
being said, they do own *selection* and *moving* of their children.
This might address some of 6493, but in any case will be a
pre-requisite for fixing it.
Fixes https://gitlab.com/kicad/code/kicad/issues/6493
2020-11-27 22:03:14 +00:00
5c08ad1ab9
Fix a few issues when copying a footprint from fp editor to clipboard, and paste it:
...
- ref and value texts were converted to user texts.
- fpid was left empty, thus creating a potential issue if pasted in the board editor.
Now:
- ref and value texts are no changed, and not copied is pasted in the footprint editor
(these texts already exist)
- a dummy fpid (clipboard:<md5 string>) is added if pasted in board editor
(Pasting a (partial) footprint from fp editor to a board editor is certainly not
a good idea but is possible)
2020-11-25 17:13:35 +01:00
d50d728d19
Cleanup compiler warnings
2020-11-25 00:08:09 +00:00
9c7c05c161
Mostly formatting cleanup but a few type-casting cleanups too.
2020-11-24 22:16:41 +00:00
1391774f64
Re-factor boundary/courtyard checker error handling.
...
ADDED Footprint Checker dialog to display the results in.
Fixes https://gitlab.com/kicad/code/kicad/issues/6446
2020-11-21 20:57:35 +00:00
22bbe9618e
French translation update
2020-11-21 19:58:13 +01:00
ff3bd7e72a
Fix a crash bug in DRC, and equate Margin to Edge.Cuts.
2020-11-20 21:22:27 +00:00
b123318cf6
Encourage use of full DRC for board & footprint malformed outlines.
...
It shows much more detail. Removes some nag dialogs and places
hypertext links in others.
Also fixes the auto-layer-showing to correctly show Edge.Cuts or
F.CrtYd or B.CrtYd for errors relating to them.
Fixes https://gitlab.com/kicad/code/kicad/issues/6446
2020-11-20 17:24:52 +00:00
9e9946628a
Go back to arrow cursor on a cancel (or finish).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6421
2020-11-19 20:09:28 +00:00
876b87b64e
Minor performance fixes for PCBNew selections.
2020-11-19 17:23:02 +00:00
04c84fa842
Remove some expensive trace calls.
2020-11-19 15:47:32 +00:00
99da663e82
Remove unused variables plus some more fixes from CppCheck
...
Remove unused variables plus a few more fixes from CppCheck
Remove unused variables plus a few more fixes from CppCheck
2020-11-19 02:28:47 +00:00
c1d1c12b41
Simplify message panel code.
...
We've had the colours turned off for two releases now without any
screaming or gnashing of teeth, so it's time to clean up the code.
2020-11-18 17:32:40 +00:00
bb3cbe3fa4
Pretty-up report a bit.
2020-11-18 00:17:07 +00:00
a207bd97bb
Naming conventions.
2020-11-17 16:05:49 +00:00
dff5173baf
Exorcise some instances of "modedit".
2020-11-17 16:05:48 +00:00
1ce1e493d6
A rule zone is not really a BOARD_CONNECTED_ITEM.
...
Or at least it shouldn't always be treated as one.
Fixes https://gitlab.com/kicad/code/kicad/issues/6382
2020-11-15 20:23:15 +00:00
d094f86b1a
Finish module cleanup (except for xpms).
2020-11-14 22:00:12 +00:00
61bca4aaa4
A bit of "module" erradication, nameing conventions, and formatting.
2020-11-14 21:21:54 +00:00
666c11965a
Clean up some more MODULE terms.
2020-11-14 19:56:06 +00:00
7bd31d5237
Naming conventions.
2020-11-14 18:26:03 +00:00
ec020dd19f
First-class support for filled shapes.
2020-11-14 01:40:32 +00:00
86b6afd14b
More cleanup of MODULE to see if it fixes SWIG error.
2020-11-13 21:07:36 +00:00
b29cd8e3a1
Rewrite EDIT_TOOL::FilletTracks to only carry out the operation when one item is connected to the anchors
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6103
2020-11-13 17:43:21 +00:00
bdc89df333
EDIT_TOOL::FilletTrack Change STATUS_TEXT_POPUP messages to an infobar instead
2020-11-13 17:43:21 +00:00
bdbb68f813
MODULE -> FOOTPRINT.
2020-11-13 16:04:03 +00:00
3451ac3088
PCB_MODULE_T -> PCB_FOOTPRINT_T
2020-11-13 15:16:24 +00:00
52a46341db
More module -> footprint.
2020-11-13 15:16:24 +00:00
f5443de7f9
D_PAD -> PAD.
2020-11-13 15:16:24 +00:00
84dd5108ba
Remove some "class_" prefixes from files.
2020-11-13 15:16:23 +00:00
f7333ad64a
Update some classnames including archaic zone names.
2020-11-12 10:31:25 +00:00
43001cae38
Simplify Net Inspector. (Remove via length and group sorting ctrls.)
...
Also renames files & classes to fit dialog title and updates method
names to match coding guidelines.
2020-11-11 14:41:17 +00:00
812b714ccd
More Module -> Footprint and a bit of formatting cleanup.
2020-11-10 20:53:12 +00:00
6e0a40e32e
Cleanup. Push more editing functions to toolset.
...
Also cleans up some more Module -> Footprint items.
2020-11-10 20:14:26 +00:00
5c309f0fef
KeepUpright should enforce 0..90, not -90..90.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5537
2020-11-09 22:50:29 +00:00
4dc877d0e9
Module -> Footprint.
2020-11-08 21:43:19 +00:00
f33e44e630
Drop selection when creating new text item.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6310
2020-11-08 00:14:43 +00:00
0ebea4be53
Cleanup and naming conventions.
2020-11-07 18:50:30 +00:00
7c60c2e404
Module -> footprint.
2020-11-07 18:50:30 +00:00
bfd8a62852
Formatting and naming conventions.
2020-11-07 18:50:30 +00:00
23d6cde0b0
Don't swally properties command when tool has no current item.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6311
2020-11-06 13:21:29 +00:00
8b295a3bd7
Handle properties dialog while creating an arc.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6215
2020-11-05 20:21:06 +00:00
a6552f14f1
Improve SNR (code, status bar and user messages).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6304
2020-11-05 16:38:04 +00:00
3216256b49
Turn off zone fill up-to-date checker in DRC.
...
The individual DRC errors will catch it, and the user can always
choose to fill zones first.
2020-11-04 18:32:27 +00:00
8c782506b9
Appy units updating more consistently to editing assistants.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6283
2020-11-04 14:11:25 +00:00
dd84ec1b51
Hide the convert submenu when there are no conversion tools available
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6092
2020-11-04 01:31:52 +00:00
d5f83d2685
Ensure dimension units are updated when being placed
...
* Fix the display of dimension units in the properties dialog. It was
previously not showing automatic units in the dialog.
* When placing dimension items (e.g. from paste or append), update the
units to the board units when the dimension uses automatic units.
Fixes https://gitlab.com/kicad/code/kicad/issues/6267
2020-11-04 01:31:52 +00:00
5ede4061e3
Bug fixes and enhancements for dimensions.
...
1) Make them easier to select.
2) Mirror text when flipping to other side of board.
3) Flip around a more "known" point (the text position isn't really
here nor there).
Fixes https://gitlab.com/kicad/code/kicad/issues/6219
2020-11-03 22:48:57 +00:00
ae9afdd169
SNR. (Mostly for progammers, but a little for user messages.)
2020-11-02 16:20:00 +00:00
4e5dd6952e
Fix arc flipping behaviour.
...
Also fixes flipping of a dragged selection to be around the anchor
point.
Fixes https://gitlab.com/kicad/code/kicad/issues/6217
2020-11-01 15:26:55 +00:00
f720b8aa2a
Don't allow selecting of invisible zones.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6225
2020-10-31 22:49:48 +00:00
8bfde9db6c
Fix typo in recent group commit fix.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6247
2020-10-31 22:24:20 +00:00
33e54f136b
Proper commit handling for group children.
2020-10-31 17:25:22 +00:00
6bf29deb7f
Improve formatting.
2020-10-31 17:25:08 +00:00
115fd1d7f3
Move track-to-zone testing to RTrees.
...
Also implemente pad-to-zone testing and removes the control in the
GUI (now that it's fast).
2020-10-31 15:45:41 +00:00
cd93dbd324
Naming cleanup.
2020-10-31 15:45:41 +00:00
d5addb692c
Move a bunch of DRC tests to RTrees.
2020-10-31 15:45:41 +00:00
a551a500bb
Fix crash when pasting to view-only frames
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6233
2020-10-30 16:33:57 -07:00
203c8df909
Respect locked flag when inline dragging.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6117
2020-10-30 17:58:37 +00:00
45618327cf
Fix crash bug closing schematic with sheet selected.
2020-10-30 15:26:07 +00:00
66d2cf172d
Clear point editor on undo/redo.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6224
2020-10-29 22:55:33 +00:00
fc6fc88219
Zone fill fixes for divots and hatching + more debug layers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6203
2020-10-29 21:20:34 +00:00
bc23fd0530
Mark footprint tests as run even if netlist is empty.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6125
2020-10-28 19:56:58 +00:00
a7d5d1f091
Add more consts all over the place
2020-10-27 11:03:35 +00:00
0948d67e56
Break wait loops on null TOOL_EVENT
...
The Wait() function will return a null TOOL_EVENT when the tool
stack is shutting down, so we can't just always pass the event,
instead we must check for null and end the looping if a null
event appears.
2020-10-27 00:32:41 +00:00
dc542be91d
Fix parentage of groups
...
In the footprint editor, we must parent the group to the module
not the board.
Fixes https://gitlab.com/kicad/code/kicad/issues/6181
2020-10-26 23:53:38 +00:00
41c6de45e4
Use our Refresh() call, not wxWidgets'.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6071
2020-10-26 15:36:07 +00:00
f74ffc5623
Pcbnew: Fix incorrect position of the graphic crosshairs cursor in H,V,45deg
...
forced mode, when the graphic polygon tool is active, but a graphic item is not started.
(The code was using the last created point, but it does not exist before starting
a line)
Fixes #6079
https://gitlab.com/kicad/code/kicad/issues/6079
2020-10-26 11:56:09 +01:00
e490b8eda4
Bring back Copy with Reference as a new action
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5916
2020-10-25 17:09:58 -04:00
386cefbe84
Do footprint keepouts by courtyard.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6162
2020-10-25 18:17:58 +00:00
07b8a03432
Improve translatability and add keepout inspection.
2020-10-25 18:17:58 +00:00
09ade9fe51
Inhibit point editor while drag-selecting
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6155
2020-10-25 12:13:25 -04:00
13baea4900
Fp editor: fix crash when converting a rect to lines
...
Avoid adding menuitems in convert context menus having no meaning in fp editor
Fixes #6158
https://gitlab.com/kicad/code/kicad/issues/6158
2020-10-25 14:51:08 +01:00
34179cd039
Add missing icon in menu, and fix them in other menus
2020-10-25 14:51:08 +01:00
81a7afc76e
Use kicad_algo directly rather than common.h
2020-10-24 08:53:11 -04:00
8d7feb3d72
Nip some common.h from headers
2020-10-24 08:28:03 -04:00
fdf6547f5f
Pcbnew: Select/Expand connection (U) does not propagate with fillet tracks
...
Fixes #6136
https://gitlab.com/kicad/code/kicad/issues/6136
2020-10-23 18:51:05 +02:00
af184e58b5
Make sure newly-added footprint's pads get Default net.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6108
2020-10-22 11:49:15 +01:00
4326e99b08
Pcbnew: "Select all tracks in net" must select track segments and track arcs.
...
Fixes #6101
https://gitlab.com/kicad/code/kicad/issues/6101
2020-10-21 20:32:52 +02:00
36f68dd39f
Pcbnew: make option Tracks filled/sketch working for track arc shaped.
...
Fixes #6096
https://gitlab.com/kicad/code/kicad/issues/6096
2020-10-21 19:43:14 +02:00
f8a4edb1c9
First pass renaming module to footprint
...
This is mostly in comments and the few remainin text strings that
reference module
2020-10-20 20:49:11 -07:00
006c462d8f
ADDED: Fillet Tracks tool in pcbnew
...
Select two or more track segments and run the "Fillet Tracks" tool.
2020-10-20 21:23:05 +00:00
661e85d705
Standardize "Key words" to "Keywords"
2020-10-20 13:18:48 -07:00
4085757aeb
Remove beginning/ending spaces in translations
...
Adding space padding makes translations more difficult by increasing
string counts
2020-10-20 12:08:04 -07:00
6cbe2131ab
Simplify string processing and ease translation.
2020-10-20 19:42:37 +01:00
07f5428951
Fix issues pasting groups into ModEdit.
2020-10-20 13:38:09 +01:00
c9d14700a7
Restore missing MW shape icon
2020-10-19 14:28:27 -07:00
e832a94a9c
Turn on zone visibility when you start drawing a zone
...
It's disconcerting to have the zone turn invisible when
you finish drawing and drop the selection.
2020-10-17 15:53:02 -04:00
51ab639ce4
Implement a better interface between inspectors and DRC rule editor.
2020-10-17 10:58:08 +01:00
1ee3df61c9
Improve robustness of infobar button handling.
2020-10-16 17:07:59 +01:00
eea7957e16
Inform user of bad DRC rules when filling zones.
...
ADDED: facility for hypertext links in infobar.
Also made use of this for via constraint errors when routing.
Fixes https://gitlab.com/kicad/code/kicad/issues/5800
2020-10-16 12:44:20 +01:00
a1c75748a0
Remove GetChars(), a wxWidgets 2.9 compatibility hack
2020-10-15 20:53:25 -04:00
fad0916f0b
Make sure inspection dialogs get raised.
2020-10-15 21:21:34 +01:00
6b7749658e
Report all implicit rules for resolution reports.
2020-10-15 20:53:27 +01:00
92d84b0d67
Naming updates.
2020-10-15 01:35:16 +01:00
a0c0bda1db
Fix crash when highlighting via
2020-10-13 21:45:09 -04:00
2c86363aa0
Relocate the page_layout includes to a page_layout folder
2020-10-13 20:33:33 -04:00
ef3b7052e0
Remove layer nag dialogs and just ignore non-shapes on Edge_Cuts.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5812
2020-10-13 20:22:31 +01:00
0cf57c7b1f
Fix minor compil warnings (shadowed vars)
2020-10-13 17:35:54 +02:00
1703729269
Require explicit decl of maxError and errorLocations.
...
This should reduce both performance issues and clearance issues.
2020-10-13 13:49:07 +01:00
2abce40553
Better selection heuristics for highlight tool
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4011
2020-10-12 22:47:31 -04:00
70c3c5c514
Retire the two-item version of BOARD_CONNECTED_ITEM::GetClearance().
2020-10-12 18:40:03 +01:00
af90642440
Hook board edge clearance constraints up to zone filling.
...
Also hooks them up to the clearance resolution reporter, and makes
some general improvements to reporting.
Fixes https://gitlab.com/kicad/code/kicad/issues/5947
2020-10-12 18:31:00 +01:00
32dffd27ab
Add silk clearance to board setup constraints.
2020-10-12 18:31:00 +01:00
c40483d18a
Cleanup: Move KiCad files into plugins folder
2020-10-12 16:36:08 +00:00
03074ae6ed
Kick the selection tool to activate (and thus update cursors) on exiting some picker tools
2020-10-11 13:12:29 -04:00
af28ef9d56
Add silk clearance checking to Resolve Clearances...
...
Also fixes a bug in order of RTrees in silk collision checker.
2020-10-11 14:18:11 +01:00
558f4b4b51
Add new place cursor, fix cursor hotpoints again
2020-10-10 23:45:21 -04:00
fdeb340d21
Defensive code against missing nets.
...
Also adds net re-parenting code to Repair Board.
Fixes https://gitlab.com/kicad/code/kicad/issues/5935
2020-10-10 16:54:19 +01:00
5aa796b5fe
Cleanup compiler warnings
2020-10-10 15:24:35 +01:00
7f3ed1479e
Back out fromOtherCommand handling.
...
It's only needed in PlaceModule() and creates problems here. Also
adds a comment regarding the encapsulation leak that makes all this
hard to maintain.
Fixes https://gitlab.com/kicad/code/kicad/issues/5932
2020-10-09 23:41:30 +01:00
bd30a4a406
Add selection lasso and window cursors
2020-10-08 21:25:21 -04:00
298d5b6a11
Report units in clearance/width/etc. resolution reports.
2020-10-09 00:16:30 +01:00
ce7794d9b6
Refresh after a Select All (without having to wait for mouse move).
2020-10-08 23:59:07 +01:00
6550e01318
Sort synthetic netclass rules by min clearance.
...
This way when 'A' and 'B' have different netclasses the largest will
fire (rather than just a random one of the two).
Fixes https://gitlab.com/kicad/code/kicad/issues/5926
2020-10-08 23:41:27 +01:00
ea387f2f28
Don't segfault after doing a cutout which removes entire zone.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5532
2020-10-08 20:33:54 +01:00
80ba02caf5
Fix iterator bug in group selection filtering.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5804
2020-10-08 14:15:10 +01:00
9c6977a994
Remember mirror setting in print dialog.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5909
2020-10-08 14:15:10 +01:00
f820dc990e
Make the delete tool use KICURSOR
2020-10-08 07:40:14 -04:00
a534f24fb6
Repair deleting of groups in modedit.
2020-10-08 11:33:32 +01:00
6752fdd58b
Fix bug with adding items to group in modedit.
2020-10-08 11:33:32 +01:00
2f49db49bf
Fix fly-off arc handles and move Arc Properties to start/end/angle.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5791
2020-10-08 11:33:32 +01:00
f5e0754f65
Use the setCursor lambda pattern and fix up the initial cursor states
2020-10-07 23:26:14 -04:00
d9485129c8
Implement more context specific cursors using both stock and custom cursors.
2020-10-08 00:50:28 +00:00
50405b558e
Make the gerbview ruler tool more like the pcb ruler tool
...
* Allow the ruler to persist after clicking once on the canvas
2020-10-08 00:45:47 +01:00
c3da54b741
Allow editing properties of locked pads
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5861
2020-10-06 17:54:50 -04:00
305fe54971
Drawing tool needs to pass resetLocalCoords event after recording it.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5879
2020-10-06 12:08:31 +01:00
37906511f5
Class renaming.
...
DRAWSEGMENT -> PCB_SHAPE
EDGE_MODULE -> FP_SHAPE
TEXTE_PCB -> PCB_TEXT
TEXTE_MODULE -> FP_TEXT
2020-10-05 11:55:33 +01:00
3a570c27f0
Update unit handling in the preview ruler
...
* Make the ruler able to switch to mils after creation
* Cleanup an unused flag in Pcbnew dimensions
* Move unit changed notification into EDA_DRAW_FRAME so more
frames to use it.
* Allow switching units when GerbView ruler tool is active
2020-10-04 17:53:55 +01:00
7a4900b8dc
PCB_LINE_T -> PCB_SHAPE_T and PCB_MODULE_EDGE_T -> PCB_FP_SHAPE_T
...
Also updated footprint text and zone types for consistencey.
2020-10-04 16:49:04 +01:00
8e515d0069
Standardize default hotkey refresh
2020-10-04 05:48:26 -07:00
bb753aaadf
Clean up terminology around active & high contrast layers.
2020-10-03 22:55:34 +01:00
400c15b8eb
Add mils to units, remove useMils variables
2020-10-03 20:06:56 +00:00
81154c9270
Back out check-for-mouse-in-selection-bbox for PCBNew.
...
Unlike eeschema, PCBNew has had a selection model for two major
releases so folks have gotten used to RMB acting on the selection
rather than what's under the mouse.
Plus it makes RMB after a drag-select nearly useless as your mouse
by definition ends up outside the selection bbox.
Fixes https://gitlab.com/kicad/code/kicad/issues/5857
2020-10-03 18:50:49 +01:00
0b23cb7dbb
more cleanup about removing useless include
2020-10-03 15:26:03 +02:00
ba26e056ec
Implement groups for modedit.
...
This uncovered a memory corruption bug in MODULE's move operator,
several bugs in MODULE's move and copy constructors, and a bug in
BOARD's GetItem() call.
It also bumps the file format for saving/restoring groups inside
footprints.
2020-10-03 12:19:50 +01:00
a25d091b6c
Add Convert Shapes tool to footprint editor
2020-10-02 18:42:41 -04:00
732f588d83
Don't hit-test groups; allow only selection promotions from members.
...
Also fixes some bugs were the selection filters weren't getting
applied correctly on drag-selects.
Fixes https://gitlab.com/kicad/code/kicad/issues/5668
Fixes https://gitlab.com/kicad/code/kicad/issues/5804
2020-10-02 13:50:16 +01:00
71ed7ee707
Revert "Drag preselected items even when "prefer selection to dragging" enabled"
...
This reverts commit d530e2c2cd
2020-10-01 18:23:30 -04:00
481026e901
Move microwave tools into a group on the main drawing toolbar
...
ADDED: Drawing group for microwave tools on main drawing toolbar
REMVOED: Microwave toolbar no longer exists
2020-10-01 19:47:55 +01:00
d530e2c2cd
Drag preselected items even when "prefer selection to dragging" enabled
...
Not being able to drag an already-selected item feels broken
2020-09-30 20:10:13 -07:00
6abe68fff0
Cleanup. No changes to execution.
2020-09-30 23:07:12 +01:00
bf3cb0b1d0
Standardize pad type enums
2020-09-30 08:38:35 -07:00
31549cdc10
Clean up some things about pad locking
...
Allow selecting pads on a locked footprint (but not editing)
Don't create point editor for pads that should be locked
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5829
2020-09-29 18:53:49 -04:00
4bb3e9dd98
Better handling of rounded pad shapes in GRID_HELPER
2020-09-28 23:59:44 -04:00
30663c293c
GRID_HELPER: allow snapping to collinear points
2020-09-28 21:38:08 -04:00
fe0f6b5ac7
ADDED: snapping to pad shape endpoints and midpoints
...
ADDED: snapping to rectangle midpoints
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4749
2020-09-28 21:38:08 -04:00
e4ca4a2a47
REMOVED: "Delete twice to delete locked" action
...
Now that it is possible to disable selection of locked
items, it is better to just prevent accidental editing
of locked items
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5793
2020-09-28 21:38:08 -04:00
74b0e1fa47
Break apart locked items from the rest of the selection filter
...
Disable selection of locked items by default
See discussion in https://gitlab.com/kicad/code/kicad/-/issues/5793
2020-09-28 21:38:08 -04:00
c21883c8c9
fix minor I18n issues.
2020-09-28 20:52:55 +02:00
456112de03
Request redraw of 3D-Viewer when moving a footprint
2020-09-28 02:26:25 +00:00
5a362dfeeb
Request redraw of 3D-Viewer when a selection from Schematic is made
2020-09-28 02:26:25 +00:00
a1e94c2583
3D-Viewer: request a redraw when a footprint is selected in pcbnew
2020-09-28 02:26:25 +00:00
23938356b9
Move "selection copied" to the status bar.
2020-09-27 00:26:18 +01:00
7f33c229d8
Allow selection of nested items (ie: pads) inside an entered group.
...
Also moves some group-related functionality from BOARD to PCB_GROUP.
2020-09-26 20:35:52 +01:00
b6e4b7bf7d
Fix order of initializing tools when loading board
...
Also add a few safeguards against invalid situations
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5801
2020-09-26 14:45:16 -04:00
7300640da0
Reload DRC rules on MODEL_RELOAD.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5794
2020-09-26 16:49:09 +01:00
f8875bc5a6
Move std::contains to alg::contains.
2020-09-26 14:42:40 +01:00
035abe960c
Fix copy/paste of groups.
...
We can't check for selected on parent groups because the order isn't
defined (and the parent may not yet have been selected). Check for
inclusion instead.
2020-09-26 12:40:48 +01:00
d7e80f8008
Add std::contains() to simplify a lot of code.
2020-09-26 12:40:32 +01:00
44af3978af
Re-implement undo/redo of group ops in a pointer-safe way.
2020-09-26 10:03:13 +01:00
f4a8275f3e
Allow selecting pads of locked footprints when filter allows
...
Before the selection filter, this heuristic made sense, but
now there is an explicit toggle to disable selection of locked
items, so we want to be able to select pads when that toggle
is enabled.
2020-09-25 21:28:04 -04:00
ba0bed7a45
Groups don't go in the view, but they do go in an overlay when entered.
2020-09-25 22:51:16 +01:00
2ae4fecaea
Paste items into group when group has been "entered".
2020-09-25 22:48:40 +01:00
6fde9ea8a5
Don't leave stale pointers in groups when exchanging modules.
...
Also simplifies groups so that other areas of code that have to know
about them at least don't have to know as much. One of the simplifications
is to not worry so much about empty groups until save time; others are in
the access logic to parent groups.
Also simplifies user model slightly by removing Merge and Flatten
(which are just ungroup/group and ungroup/ungroup/.../group).
Also allows multiple groups to have the same name. This is useful when
using groups for a classification system.
Fixes https://gitlab.com/kicad/code/kicad/issues/5788
2020-09-25 18:43:19 +01:00
d1322e7d1d
Refactor GetDocumentExtents()
...
CHANGED: GetDocumentExtents() in 'eda_draw_frame.h' now has a bool
parameter "aIncludeAllVisible" with a default value "true" which makes
it behave as it did before adding parameter. If "aIncludeAllVisible"
is false, the returned bbox ignores some items depending on which
program it is running in.
CHANGED: Made "Zoom to Objects" use only PCB edge in Pcbnew. This
allows text, notes, etc outside the PCB edge to be excluded in the
zoom calculation.
CHANGED: Added "Zoom to Objects" to Pcbnew main menu, and to RMB context
menus for Eeschema and Pcbnew.
Fixes https://gitlab.com/kicad/code/kicad/issues/5787
2020-09-25 00:31:56 -07:00
0783669633
CHANGED: Design rules files now use .kicad_dru extension
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5763
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5444
2020-09-24 21:26:23 -04:00
5ad76a237e
Moving checking the rules up a level so we can properly exit DRC dialog.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5778
2020-09-24 15:17:46 +01:00
dba42ebed0
ADDED Properties Dialog for groups.
...
ADDED memberOf() function for DRC rule expressions.
Also fixes a bug in several of the pickers where the event wasn't
being correctly passed.
Fixes https://gitlab.com/kicad/code/kicad/issues/5647
2020-09-24 14:41:02 +01:00
690575e2b6
Improve edit point legibility with a hover state
2020-09-23 21:27:23 -04:00
6dae769944
Progress reporting for connectivity tests.
...
Also makes via annulus terminology more consistent.
2020-09-23 16:28:00 +01:00
167ae374fd
Don't allow two DRC runs at the same time.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5745
2020-09-23 14:10:07 +01:00
6d18f20093
ADDED constraints reporter for diagnosing constraints.
...
Also fixes an issue with via type property and makes property
comparisons in rule case-insensitive.
Fixes https://gitlab.com/kicad/code/kicad/issues/5754
2020-09-23 01:14:35 +01:00
e77b7e3360
Make MMB double click perform 'Zoom to Fit'
...
ADDED: Make middle mouse button double click do a 'Zoom to Fit'
in Eeschema, Pcbnew, and Gerbview. Ctrl-MMB does a 'Zoom to Objects'
in Eeschema.
Fixes https://gitlab.com/kicad/code/kicad/issues/1988
2020-09-22 23:21:44 +00:00
acf13a1869
ADDED: Orthogonal dimension object
2020-09-21 23:55:02 -04:00
18e17abd6a
Rename "Keepout" to "Rule Area"
...
These objects can now be used in advanced DRC rules and
not just for keeping things out. Also remove the restriction
that at least one of the "basic" keepout rules must be set,
so that these areas can be used for more advanced rules.
2020-09-21 23:55:02 -04:00
ffa1947056
pcbnew: Simplify copy routine
...
Choose a decent copy reference from the mouse position when copying.
Don't break UX standards by requiring mouse action when activating copy.
2020-09-21 13:28:21 -07:00
4badcba4c2
Zone fill performance improvements
...
1) better load-balancing for deferred zones
2) sort zones by priority before filling
3) retire BOARD::GetZoneList() which had a horrible performance profile
4) implement a zone bounding box cache
5) better checks for IsCancelled() so long fills can be exited
Fixes https://gitlab.com/kicad/code/kicad/issues/5738
2020-09-21 21:09:58 +01:00
d3dd1c45b6
Disable editing tools on the canvas when DRC is running
2020-09-21 20:39:46 +01:00
492a634413
Fp editor: Fix bug when moving fp anchor: pad shapes where not updated on screen.
2020-09-21 14:43:26 +02:00
542f447daa
DRC tool: Ensure all calls to the dialog are guarded by null checks
2020-09-21 12:04:41 +01:00
d9a94dc538
Don't allow selection of PCB_NETINFO_T.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5729
2020-09-20 16:41:39 +01:00
89dcc46898
Coverity cleanup and remove unused variables
2020-09-20 02:20:41 +01:00
67b5d24995
Support ESC & Cancel for DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5698
2020-09-18 22:14:00 +01:00
53297c78a6
Don't eat commands we don't need in move tool.
...
This also fixes the dynamic ratsnest issue.
Fixes https://gitlab.com/kicad/code/kicad/issues/5692
2020-09-18 13:14:08 +01:00
a53f3899d4
Initialize variables properly
2020-09-18 11:17:37 +01:00
5feb4d3a7a
Pcbnew: Check if user wants to warp mouse to origin of moved object
...
CHANGED: When moving a footprint, Pcbnew was always warping the mouse
to the origin of the moved object regardless of the state of the "Warp
mouse to origin of moved object" checkbox. This MR now honors the
state of the checkbox when moving footprints.
Fixes https://gitlab.com/kicad/code/kicad/issues/5279
2020-09-18 02:47:59 +00:00
8dd725469f
Process properties command locally within drawing tools.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5612
Fixes https://gitlab.com/kicad/code/kicad/issues/5615
2020-09-17 22:32:22 +01:00
e9b627bfd8
ADDED: Center marker dimension type
2020-09-16 20:55:11 -04:00
5109857883
Disable deselect net from main context menu
...
Right now we can't track the intended item to deselect
when there's an active selection already.
Having this feature available just from the appearance panel
should be fine.
2020-09-16 20:55:11 -04:00
4a25db599e
ADDED: Deselect net action
...
You can now deselect nets and netclasses (i.e. remove them from the
active selection) via the context menus in the appearance panel
2020-09-16 19:10:12 -04:00
2b43ffd12d
Better error reporting; better nullptr safety.
...
Also clears the marker lists before running a DRC, and sets
the drcRun flags afterwards so that the notebook tab counts
get updated.
Fixes https://gitlab.com/kicad/code/kicad/issues/5659
2020-09-16 22:14:41 +01:00
db40e0c595
Fix dimension point editor ordering
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5656
2020-09-16 12:05:30 -04:00
ce3819abf8
Remove redundant clearances from DRC dialog. Fold progress bar in.
2020-09-16 16:06:29 +01:00
75ffce1a0b
ADDED: Leader dimension object
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5555
2020-09-15 23:37:38 -04:00
e2e229da96
Finish exorcising the old DRC system.
...
This moves the various BOARD_ITEM calls to the new system, and make
the DRC_ENGINE long-lived so that it can field those queries.
2020-09-15 20:15:46 +01:00
67a7aa8ba4
Make snapping size grid-dependent
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5638
Fixes https://gitlab.com/kicad/code/kicad/issues/5588
2020-09-15 12:07:34 -07:00
08bf5f4b4e
ADDED: 45° snapping for rectangles aka Squares
...
The snap obeys only the Ctrl key and not the global preference setting
for drawsegments because rectangles are _always_ on H/V lines when drawn
Fixes https://gitlab.com/kicad/code/kicad/issues/5607
2020-09-15 11:22:26 -07:00
514da2f886
Move DRC dialog to new DRC engine.
2020-09-14 22:39:36 +01:00
d7e9411049
Filter out footprints that are larger than the viewport in either direction
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2448
2020-09-12 13:16:10 -04:00
3940e20fcb
Expose extension offset and zero suppression settings
2020-09-12 11:52:59 -04:00
1703657fb5
Decrease default snap range
...
The snap range needs tuning to preference and monitor resolution. This
shifts the default range down for users until the customization bits are
implemented.
2020-09-12 08:34:21 -07:00
e40287d327
Fix auto units to work when drawing new dimensions
2020-09-12 10:30:33 -04:00
0e9997d9ca
Add new dimension features to board design defaults
2020-09-11 21:12:36 -04:00
76c4c959e6
Implement new dimension properties
...
- Automatic units mode (follow UI units)
- New text and number formatting options
- Automatic/manual text orientation control
- New text positioning options (inline and manual)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4280
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4497
2020-09-11 21:12:36 -04:00
b11e315d10
Refactor DIMENSION to hide internal details; add some new properties
...
This is a board file format change to account for the new properties.
Also, we now only store the critical information about the dimension's
geometry in the board, rather than storing every drawn line.
The DIMENSION object is now an abstract base, and ALIGNED_DIMENSION
is the implementation that exists today (we will add more dimension
types in the future)
2020-09-11 21:12:36 -04:00
5be887a60f
Iron out some wrinkles in the DRC migration.
2020-09-12 01:57:37 +01:00
8ac7288696
Fix a crash bug loading DRC rules.
...
Also moves the clearance report to the new DRC engine.
2020-09-12 00:46:55 +01:00
d14c6ba71f
Keep snap line alignment before new snaps
...
Also fixes the alignment line that was supposed to be dashed and not
solid.
2020-09-11 14:22:41 -07:00
f493e270ea
ADDED: Menu option to enable/disable snap to grid
...
You can now enable and disable snap to grid when drawing/editing across
all apps. You can also tie snap to grid to the visibility of the grid
to allow rapid enable/disable via grid display.
2020-09-10 20:09:30 -07:00
fc1665ff28
ADDED Clearance Inspector.
2020-09-10 20:58:38 +01:00
4026904cc4
Make grid snapping depend on grid visibility
...
Turning the grid view on enables snapping to the grid. Turning it off
removes the snap and allows free draw
2020-09-09 10:18:15 -07:00
173b4ff588
Add snapping to eeschema
...
This generalizes both the SetPosition() function and ORIGIN_VIEWITEM
class away from the pcbnew-centric.
2020-09-09 10:18:15 -07:00
3d5b216d1d
Allow rectangles to be converted to lines
2020-09-08 08:41:33 -04:00
9ea96ee64e
Update pad layer testing for selectability.
...
My only guess is the old code predated the introduction of
GetLayerSet(). In any case it was long-winded and still didn't
catch the case of being on copper layers other than front or back
(which might be hidden).
2020-09-08 11:02:09 +01:00
7e2a6a9b64
Block undo/redo while editing points
...
We need to keep a stable board while modifying items.
Fixes https://gitlab.com/kicad/code/kicad/issues/5533
2020-09-06 15:30:38 -07:00
1be1205734
Repair missing checkVisibilityOnly test.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5516
2020-09-05 19:12:07 +01:00
adfcdc89af
Repair parent pointer after SwapData() nukes it.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5523
2020-09-05 18:51:56 +01:00
7893af2c60
insideArea should be outline-based, not fill-based.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5499
2020-09-05 00:25:19 +01:00
2babcd5936
Do not translate debug strings
2020-09-04 20:29:22 +02:00
2736becb8b
Fix typo in Toggle Layers action and add descriptions to hotkeys lists.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5494
2020-09-04 17:45:07 +01:00
b0081606f7
Fix crash bug in Select All / Delete.
...
We only expect footprint edge selections in the Footprint Editor.
They cause PCBNew's undo architecture to wrap itself in knots.
2020-09-03 15:03:09 +01:00
cb36006406
First round of cleanup for the PCB groups
...
ADDED: Leave group action
Fixes https://gitlab.com/kicad/code/kicad/issues/5299
2020-09-02 02:10:26 +01:00
6e72f609f0
Make sure router and via tools update when sizes change.
...
Also adds a size menu to the context menu for the Via tool.
Fixes https://gitlab.com/kicad/code/kicad/issues/5321
2020-08-31 23:33:02 +01:00
108936079b
Fix default hotkey clash on "Delete Full Track"
...
Fixes https://gitlab.com/kicad/code/kicad/issues/3710
2020-08-31 15:48:29 +00:00
1fa96b794a
Update some strings for Appearance manager.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5431
2020-08-31 16:38:11 +01:00
88635ee5b6
Clean up error messages.
...
Convert a lot of nags to InfoBar errors/warnings/messages, and some
that never should have been exposed to wxFAIL_MSGs.
2020-08-31 14:19:57 +01:00
4a0d6297ab
pcbnew: Add an alternate edit method for arcs
...
The alternate edit methods keeps the radius constant
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5369
2020-08-29 22:59:11 +00:00
fa8655511e
Enable converting segments to arcs
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1957
2020-08-29 12:13:51 -04:00
a390b19f97
Move actions around
2020-08-29 10:43:05 -04:00
19832c7599
ADDED: Tool for converting shape types in PcbNew
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2406
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2507
2020-08-28 21:16:06 -04:00
9e12ea9bb6
Cleanup some dead code and make better use of iterators.
...
Also applies coding style around auto and lambdas.
2020-08-28 11:05:58 +01:00
b8aee85b94
Don't drop selection on an undo/redo.
...
We want to be able to restore it back to the way it was.
Fixes https://gitlab.com/kicad/code/kicad/issues/5356
2020-08-28 11:05:58 +01:00
1e461c2259
ADDED: Improved center point dragging
...
The center point on polygons now maintains the axis of the dragged line
and, optionally with Ctrl pressed, maintains the slope of the adjacent
segments as well.
This also fixes a longstanding issue that prevented the ctrl-snapping
from using the original point rather than the last updated point when
constraining.
Fixes https://gitlab.com/kicad/code/kicad/issues/2465
2020-08-27 10:34:12 -07:00
0dc0536cbf
pcbnew: Fix Select All copy-pasta
...
Adds condition to footprint editor and corrects condition for both
modedit and pcbnew
2020-08-26 17:19:32 -07:00
1082402b33
Convert UNDO_REDO_T to an enum class
2020-08-26 18:04:32 +00:00
1138c32bf3
Don't pass Cancel event where there was a specific action cancelled.
...
For instance, if during a move the user hits ESC they only want the
move cancelled, not (for instance) the selection dropped.
Fixes https://gitlab.com/kicad/code/kicad/issues/5356
2020-08-25 12:54:40 +01:00
b8bbe72e48
Another attempt to fix the select-reference-point toolstack thing.
...
This time remove the push/pop from the picker tools as that's
responsible for the issue of trying to re-activate the move action
when its popped. Instead do the push/pop from the client code
of other actions that need it, and not at all from the move-with-
reference action.
Fixes https://gitlab.com/kicad/code/kicad/issues/5336
2020-08-24 22:47:24 +01:00
50b182574d
Missing change from last commit.
2020-08-24 21:59:43 +01:00
5a0db6802a
Use IsOnLayer(); GetViewLayers() now returns synthetic ZONE layers.
...
Also uses IsPadOnLayer() for pads so that it will drop layers which
have had their pads removed.
Fixes https://gitlab.com/kicad/code/kicad/issues/5349
2020-08-24 20:20:04 +01:00
a4ff339a1e
Clear toolstack after cancel.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5336
2020-08-24 19:28:53 +01:00
8eda4d93ee
Use LAYER_VIAS instead of via-type-specific layers for visibility.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5344
2020-08-24 14:00:46 +01:00
502f2ca2ef
Fix some snarled up event processing.
...
See the bug for details. It's complicated.
Fixes https://gitlab.com/kicad/code/kicad/issues/5336
2020-08-24 13:20:29 +01:00
dd374e12ad
Pcbnew: Fix bug when mouse moves off clarification menu
...
CHANGED: This code fixes an issue where bringing up the clarification
menu and moving off it while keeping the button pressed the entire
time caused an assertion.
Fixes https://gitlab.com/kicad/code/kicad/issues/5250
2020-08-22 16:48:19 -07:00
c71bb246e6
Don't allow preview to try and draw empty polygons.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5314
2020-08-22 23:46:56 +01:00
a2341f0f33
Pin dragged pad edges to hole (if it has one).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5317
2020-08-22 20:45:54 +01:00
e92f58bb4f
Implement "fromOtherCommand" for PlaceModule() too.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5281
2020-08-21 23:24:29 +01:00
20de1b2b4f
Minor code tightening
2020-08-20 20:18:31 -07:00
29ddc73d6c
Pcbnew: Allow rects to have overlapping end corner locations
...
CHANGED: If a rectangle is drawn and the location of the second corner
is the same as another rectangle's second corner, Pcbnew crashes. The
reason is that a call is made to DRAWSEGMENT::GetLength(), but that
function only handles shapes of type S_CURVE and S_SEGMENT. This code
checks if the overlapping end points are from a rectangle and if so
it doesn't call DRAWSEGMENT::GetLength().
Fixes https://gitlab.com/kicad/code/kicad/issues/5282
2020-08-21 02:58:32 +00:00
1e315bc3fe
pcbnew: Add "Select All" Action to pcbnew and fpedit
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2497
2020-08-20 16:07:10 -07:00
38a994975b
Output resolved text from PCBNew BOM generator.
2020-08-20 13:41:50 +01:00
c479deaf02
Use groups when doing graphics import
...
ADDED: Allow DXF/SVG graphics to be imported as a group
Also, cleanup the placement routine to allow the edit tool's flip
and rotate routines to be used when placing the items.
2020-08-20 01:22:48 +01:00
631b5a9340
Don't allow point editor inversion when editing pad shapes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5272
2020-08-19 23:27:16 +01:00
95591669f1
Merge board properties when appending board.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5255
2020-08-19 19:32:20 +01:00
2bf4fcae2a
Cancel preceeding command if Move was called to place it.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5252
2020-08-19 13:18:53 +01:00
f2a902c0b1
Remove extraneous drag actions.
2020-08-18 19:05:30 +01:00
ede39780e2
Remove all debugging output that cannot be disabled.
...
The use of printf, wxLogDebug, and std::err/std::out causes excessive
debugging output which makes finding specific debugging messages more
difficult than it needs to be.
There is still some debugging output in test code that really needs to
be moved into a unit test.
Add debugging output section to the coding policy regarding debugging
output.
2020-08-18 10:17:36 -04:00
294de666a4
Don't update msgpanel while dragging zone points
2020-08-18 13:11:47 +00:00
d2086eecdd
Don't update panel while drawing a dimension
2020-08-18 13:11:47 +00:00
73b2a10cab
Don't try updating msgpanel while segments.
2020-08-18 13:11:47 +00:00
a417da4ce0
Split selecteditemmodified to a selecteditemmoved to reduce updatemsgpanel spam
2020-08-18 13:11:47 +00:00
3696064f6f
Don't post update events twice and on motion for movement of items
...
Fix #4880
Fix #4741 (hopefully)
2020-08-18 13:11:47 +00:00
a0956fbf97
text tool: msgpanel on motion is the same as msgpanel on not moved text....
2020-08-18 13:11:47 +00:00
3c66f932bf
Synchronize flip board checkbox
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5224
2020-08-17 21:48:11 -04:00
e825a99b9a
Consolidate some UI conditions from context menu enabling
...
These conditions are for enabling/disabling a control,
so place them inside the new UI conditions framework instead
of the separate update routine.
2020-08-17 23:21:25 +01:00
0debaa5866
Update selection ratsnest should do slow updates sometimes
...
When rotating/mirroring/etc, the selection ratsnest should be
recalculated to keep the lines correctly connected for the fast tree
move.
Fixes https://gitlab.com/kicad/code/kicad/issues/5194
2020-08-16 13:31:50 -07:00
4491f24d5e
Ripout the old SyncToolbars infrastructure reminants
...
The tool framework no longer needs to request updates of the UI
state for the controls, wxWidgets will do it for us.
2020-08-16 19:10:26 +00:00
e8b11c911e
Migrate Pcbnew/footprint viewer/footprint editor to the new UI update system
2020-08-16 19:10:26 +00:00
d19ff3e595
Unify the UI IDs for actions between the menus and toolbars
...
By unifying the IDs so that an action only has one UI ID,
it will receive only one update event that will work for
all controls using the action.
2020-08-16 19:10:24 +00:00
bd14f8a82a
ADDED: New appearance control widget for PcbNew
...
Featuring:
- Layer view presets
- Per-type opacity for tracks, vias, pads, zones
- Net and netclass color and visibility controls
CHANGED: Simplified object visibilty controls
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1951
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1981
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2003
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2173
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2254
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4325
2020-08-15 15:24:28 -04:00
e4021a9ffa
Fix some I18n issues.
...
Strings used for debug and strings containing only a print format like "%i"
are not translated
2020-08-15 17:56:32 +02:00
a0c54951db
pcbnew: Clean up group move
...
SetPosition() only changes the base position of tracks, we need to use
Move() to move the whole element.
This also cleans up white space and group handling in ratsnest
Fixes https://gitlab.com/kicad/code/kicad/issues/5188
2020-08-14 19:47:03 -07:00
b8b3d5c16d
pcbnew: Remove all threading from dynamic ratsnest
...
The last remaining threaded operation in dynamic ratsnest was the
recalculation of the dynamic connectivity map. Because we do not
require any of the extra features of the connectivity map, we can get
away with a lightweight move of the anchors to update the ratsnest. The
resulting connectivity tree is not valid but it is not needed for the
ratsnest, which only needs a list of nets/anchors.
2020-08-14 17:48:33 -07:00
393bb0fd83
Fix assert where geometry routine wasn't ready to handle layers.
...
This introduces layer handling to a lot of the geometry routines.
Many of them don't do much with it now, but it does help multi-layer
zones and will help when padstacks are implemented.
2020-08-12 22:20:08 +01:00
a6d44676b3
Move commit handling outside of ZoneFiller.
...
This allows us to rever the commit on a cancel.
Fixes https://gitlab.com/kicad/code/kicad/issues/5107
2020-08-12 22:20:07 +01:00
b41892e4da
Rename class GROUP in pcbnew to PCB_GROUP
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5156
2020-08-12 15:36:08 +01:00
ab58b67842
Adding triangulation viewing to AC
...
This adds a helper routine to visualize the quality of our
triangulation. It also renames an excessively long variable name for
the arc editor
2020-08-12 06:22:45 -07:00
ee428876ec
ADDED: Group/Ungroup function
...
This implements the group/ungroup functions to mark a set of EDA_ITEMs as a unit, allowing them to be moved and rotated as a unit
2020-08-11 19:37:07 +00:00
a0f95855d1
ADDED board repair tool.
...
Currently it just fixes duplicate UUIDs.
2020-08-11 15:02:27 +01:00
5ab39b7c06
Clean up reannotation UI.
2020-08-11 15:02:27 +01:00
e03f6a3b49
Pcbnew: Route all display options updates through the frame
...
The frame contains the main option set that is used for setting the UI
state, so it must be updated. The frame also updates the view when set,
so calling the view separately to update the options isn't needed.
Fixes https://gitlab.com/kicad/code/kicad/issues/5069
2020-08-11 01:20:11 +01:00
211cbadc24
pcbnew: MODULEs are not BOARD_CONNECTED_ITEMS
...
Handling ratsnest requires first checking for modules, handling their
pads and then checking that the remaining elements derive from
BOARD_CONNECTED_ITEM
Fixes https://gitlab.com/kicad/code/kicad/issues/5131
2020-08-10 11:01:03 -07:00
23a5b0ca5f
fix a few compil warnings and a Coverity warning.
2020-08-10 18:32:44 +02:00
34705fd8b2
More clone vs duplicate bugs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5120
2020-08-10 14:45:01 +01:00
692aeff334
Fix a bunch of usages of copy ctor that really meant duplicate.
...
In particular, "duplicate" means "with a new KIID".
Fixes https://gitlab.com/kicad/code/kicad/issues/5127
2020-08-10 14:23:11 +01:00
5fc6b74c89
ADDED: Remove unused pads
...
This option removes copper layers from pads and vias where they are not
connected to other board elements. This allows the inner layers to be
more closely routed if the via landing pad is not needed.
Fixes https://gitlab.com/kicad/code/kicad/issues/1835
2020-08-10 03:27:26 +00:00
133d082cc5
Pcbnew fix arc edition
2020-08-09 23:03:31 +00:00
d08bf90576
ADDED: Geographic Reannotation
2020-08-09 12:43:05 -04:00
4317881012
Improve delete-unused-layers to better handle multi-layer items.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5116
2020-08-09 15:39:51 +01:00
5c3fddffa6
Handle module keepout zones on internal layers.
...
Make sure the Keepout Zone dialog allows specifiying them and make
sure they're selectable.
Fixes https://gitlab.com/kicad/code/kicad/issues/5113
2020-08-09 00:24:53 +01:00
e5b50d90a7
Update DRC rules to new layer and disallow grammars.
...
Also adds support for hooking rules up to named zones.
Fixes https://gitlab.com/kicad/code/kicad/issues/2041
2020-08-07 21:49:36 +01:00
406de56964
pcbnew: Prevent use of non-connected item in ratsnest
...
We need to be careful in the connectivity system to always use
dyn_cast/dynamic_cast and check the return when dealing with board
items. Getting non-connected items will result in null nets when
propagated.
Fixes https://gitlab.com/kicad/code/kicad/issues/5082
2020-08-07 13:38:51 -07:00
00e77d1ba4
Implement pad & via aprons for hatched zones.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2519
2020-08-07 15:15:43 +01:00
4b51184678
Don't try and select if we don't have a location.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5088
2020-08-06 01:22:59 +01:00
e2ec9d9f00
A more fail-safe way to disallow editing while routing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4413
Fixes https://gitlab.com/kicad/code/kicad/issues/5067
2020-08-05 16:51:58 +01:00
59ba793096
Disable various combinations of router and editing commands.
...
They just confuse each other.
Fixes https://gitlab.com/kicad/code/kicad/issues/5067
2020-08-04 14:32:02 +01:00
7108a25278
Fix issues flipping text.
...
This is a really hard problem to get right. This algorithm won't
look quite right if you assemble a paragraph from disjoint text
objects and flip them all top-to-bottom (as it will re-order the
text). But this is really the nature of the problem (and has to
stay that way to correctly flip disjoint graphic items or mixed
text and graphic items). The real fix here is to support text
wrapped in a single text box.
Fixes https://gitlab.com/kicad/code/kicad/issues/4480
2020-08-02 17:05:13 +01:00
dae40d5c9f
Don't use std::set_difference which assumes sorted lists.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4968
2020-08-01 22:15:53 +01:00
b2dc592bf1
Clear UUID and path when pasting board items.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4992
Fixes https://gitlab.com/kicad/code/kicad/issues/4041
2020-07-30 18:06:42 +01:00
be957e0105
Convert parent-less module items to board items on paste.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4938
2020-07-27 19:53:42 +01:00
Jeff Young
jean-pierre charras
Ian McInerney
Dominik Wernberger
Roberto Fernandez Bautista
Seth Hillbrand
Jon Evans
Marek Roszko
Michael Kavanagh
Mikolaj Wielgus
Mario Luzeiro
PJM
Fabien Corona
Wayne Stambaugh
Qbort
Joshua Redstone
bjpiccioni