fb3730a9c0
STEP export: fix missing zones (they were added too late in code)
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/18177
2024-06-09 17:32:34 +02:00
a9ae86eefd
Cleanup geometry functions
...
Added Distance(VECTOR2) function that returns a double. Removed
superfluous EuclideanNorm, GetLineLength, integer constructor for
EDA_ANGLE (this promotes to double in the CTOR), DistanceLinePoint and
HitTestPoints
Also extended the size for arc calculations that get distances to center
points to avoid overflow
2024-05-31 12:26:37 -07:00
b88d3b13ac
ADDED: sketch-pads-on-fab-layers to CLI PDF & SVG export.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/18091
2024-05-27 20:59:11 +01:00
e55da55e04
Remove debugging code from STEP exporter.
2024-05-26 08:05:25 +03:00
b89d4a7f20
3D model export improvements:
...
- Option to export pads separately from tracks+vias
- Options export silkscreen and soldermask as flat faces
- Improve 3D model export dialog layout
- Use VisMaterialTool to specify metallic-roughness for glTF.
- Less OCCT boolean operations (faster, less bugs)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2072
2024-05-25 22:27:01 +03:00
615f216ef6
STEP export: don't double-check the wire.
2024-05-19 04:08:43 +03:00
1a0ce67155
STEP export: reverse Wire when adding it to Face as a hole.
...
Better fix for https://gitlab.com/kicad/code/kicad/-/issues/17446
(cherry picked from commit 1264230973
2024-05-19 04:02:35 +03:00
e00219f459
STEP export: allow closing (and constructing) the wire with 1nm edges.
...
This is ok (and required) because we don't mess with BRepBuilderAPI::Precision nowadays.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/18030
(cherry picked from commit 5b1c84b5dd
2024-05-18 22:52:41 +03:00
0772739cf1
3D model export: Improve 3D layer placement calculation algorithm.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/18035
2024-05-17 18:20:24 +03:00
fd438cb8e0
VRML to XCAFDoc reader is only available in OCCT 7.7.0+
2024-05-16 22:52:19 +03:00
8fd12d8b7e
Allow reading VRML models for glTF export.
...
Note that some VRML 2.0 models fill fail until our patches are integrated into OCCT 7.9.0.
2024-05-16 21:57:48 +03:00
2179685dd2
STEP export: Use TDocStd_XLinkTool to copy model with colors instead of our DIY routine.
...
Now supports older OCCT versions.
Also puts components at a higher level in the hierarchy.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17549
2024-05-16 13:01:40 +03:00
e2294a769a
Revert "STEP export: Use TDocStd_XLinkTool to copy model with colors instead of our DIY routine."
...
This reverts commit f735c9bdc2
2024-05-15 22:55:19 +00:00
f735c9bdc2
STEP export: Use TDocStd_XLinkTool to copy model with colors instead of our DIY routine.
...
Also puts components at a higher level in the hierarchy.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17549
2024-05-16 01:33:06 +03:00
c800fb790d
Start unifying padstack properties
2024-05-14 20:57:56 -04:00
0e58f1bad4
Improve approximateLineChainWithArcs algorithm.
2024-05-14 18:07:53 +03:00
3e0c598500
Honour LAYER, SHEETNAME and SHEETPATH variable overrides on CLI.
...
Also allows the LAYER variable to work automatically
if you're plotting/exporting a single layer.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17680
2024-05-13 20:04:00 +01:00
c659b46d5e
Formatting.
2024-05-13 19:21:20 +01:00
482cf659a7
IDFv3: control whether DNP/unspecified components are exported
2024-05-08 10:24:50 -04:00
8184ed64e7
Explicit control over hidden text in bounding boxes.
...
In particular, don't consider hidden text when plotting,
and only when AsItemCheckboxes is checked for printing.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17958
2024-05-06 21:36:19 +01:00
5475359d00
More build time optimizations.
2024-05-06 04:39:28 +03:00
7d37cebfdf
Fix orientations of some footprint STEP models.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17631
2024-04-28 23:11:26 +03:00
b3bc352c57
Use default stackup if stackup is not defined in STEP/BREP/XAO export.
2024-04-26 15:25:48 +03:00
c8db8d087e
Remove debug line.
2024-04-26 02:40:22 +03:00
9e673bb891
Polyfill GetOneShape from OCCT.
2024-04-26 02:36:17 +03:00
1ae9e9b676
ADDED: XAO export for SALOME / Gmsh workflows.
...
Pad surfaces are assigned as face groups.
2024-04-26 01:53:43 +03:00
da1926d723
STEP/BREP export: ensure pad surface is a separate face.
...
Useful for FEM simulation.
2024-04-25 15:34:52 +03:00
5f81e01f43
ADDED: --net-filter option to STEP/BREP export CLI.
2024-04-24 18:28:53 +03:00
3f32f0c2d8
STEP/BREP export: approximate zone polygons with arcs.
...
- Speeds up processing significantly
- STEP file size reduction to 30%
2024-04-23 19:25:23 +03:00
bbab5a979a
STEP export: Remove autosave prefix from label names.
...
The autosave file is used if the board was modified.
2024-04-22 04:06:04 +03:00
c68e3ceb44
ADDED: Export inner PCB copper layers to STEP / BREP / GLTF.
...
Also adds options to exclude board body and components.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16855
2024-04-22 03:39:46 +03:00
cd2925d3d7
ADDED: Fuse Shapes option for STEP/BREP/GLTF export.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17777
2024-04-19 03:43:26 +03:00
d00cda3b2f
Fix build with OCC 7.5.x
2024-04-18 18:09:42 +00:00
3da5616939
step/step_pcb_model.cpp: add missing includes.
2024-04-18 13:55:49 +02:00
55fb70ae65
STEP export: use fused shapes for pads instead of polygon approximations.
2024-04-18 13:44:14 +03:00
b50a1c967f
Report errors and warnings when using BRep cutting algorithm.
2024-04-18 13:44:14 +03:00
01fedb86e2
Fix shadowed variable.
2024-04-17 18:22:22 +03:00
d97ac47509
Try to use parallel processing in BRep cutting algorithm.
2024-04-17 18:15:17 +03:00
d98d7f9017
ADDED: Support 3D shape export in BREP format.
...
BREP doesn't support colors or label names,
but is much faster to write/read compared to STEP.
2024-04-17 17:31:10 +03:00
bf16f757ed
STEP export: disable history to speed up hole cutting.
2024-04-17 16:09:03 +03:00
822409225a
STEP export: don't fail when can't construct a wire.
...
This can happen with very small shapes.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17774
(cherry picked from commit 481c1592ae
2024-04-16 22:36:34 +00:00
7d68e19afa
enum * double is deprecated
2024-04-13 15:14:39 -04:00
cb8ed07858
GERBER_JOBFILE_WRITER: use UTF8 encoding according to current specif.
...
Since 2020, non ASCII7 chars are encoded using UTF8 encoding.
A old but incorrect encoding was previously used.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17534
2024-03-22 09:50:32 +01:00
800ff9ffb1
STEP export: add location info to edge add failures.
2024-03-19 23:10:37 +03:00
75037dd1d1
STEP export: handle small segments connecting two arcs better.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17499
2024-03-19 22:53:30 +03:00
63dd4aed93
Step exporter: workaround to fix issue for boards with main round outline
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17446
2024-03-19 11:19:37 +01:00
36331e259a
VRML: add options to exclude DNP/unspecified types like STEP exporter
2024-03-04 10:10:34 -05:00
85b1978408
Use 64-bit type to represent microseconds.
...
int and long are 32-bit on Windows, causing overflows.
2024-03-03 21:40:26 +03:00
a4929f9c27
Step exporter: handle circles correctly
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17137
2024-03-02 19:09:33 +01:00
5900f6baa4
Do not call MakeShapes in AddCopperPolygonShapes when polyset is empty.
...
Ease of debugging.
(cherry picked from commit 0184dfb625
2024-02-23 22:15:17 +03:00
jean-pierre charras
Seth Hillbrand
Jeff Young
Alex Shvartzkop
Jon Evans
Mike Williams
aris-kimi
Marek Roszko
Roberto Fernandez Bautista